Before 11g installation complete, power failed

Hi,
i was installed oracle 11g, before end of install completition unfortunately power was failed but that paticular path that files are been extracted, plz advice what to do next action
regards
venki

Thanks to advice
i'm started to re-installed

Similar Messages

OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"

OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"
it is the lost step of OBIEE-11g installation and it failed "opmnctl start coreapplication_obips1".appriciate for early reply.
"opmnctl task failed" Taks executing "opmnctl start coreapplication_obips1" is failed.OBIEE Guru's help urgently.
Edited by: RAGHAVENDRA HARI N on Sep 11, 2012 5:09 PM

Hi, check the server logs inside <@yourBIPath>/bifoundation/diagnostics/OBIEEPresentationservicecomponent and OBIEE servercomponent.
This may sound silly, but are your servers&the nodeman up and running?
Regards,
D

Installation of Oracle Database 11g R2 Grid is failing

Hi Guys,
I've been trying to install Oracle Grid Infrastructure 11g R2 (11.2.0.2) for a long time, but, failing every time. This is what I've tried so far:
Things being used:
OS: Oracle Enterprise Linux 5.2
VM Software: VMware Workstation 7.1 and VMware Server 2
Oracle SW: Oracle Grid Infrastructure 11g R2 - 11.2.0.2
VMs: Three RAC nodes - rac1, rac2, rac3
I've tried to follow the link given below to on both VMware Server and VMware Workstation all goes well until it asks us to run two scripts as root.
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php
The script "/u01/app/grid/11.2.0/root.sh" completes successfully on the first node, rac1, however, it fails on the rest of them with the following error:
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Start of resource "ora.crsd" failed
CRS-2800: Cannot start resource 'ora.asm' as it is already in the INTERMEDIATE state on server 'rac2'
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start Cluster Ready Services at /u01/app/grid/11.2.0/crs/install/crsconfig_lib.pm line 1065.
/u01/app/grid/11.2.0/perl/bin/perl -I/u01/app/grid/11.2.0/perl/lib -I/u01/app/grid/11.2.0/crs/install /u01/app/grid/11.2.0/crs/install/rootcrs.pl execution failed
Instead of using shared disk as "independent-persistent" disks I've also used openfiler 2.99 to allocate storage by following below given link. With that the issue was that the iSCSI disks were not persistent and no solution worked to fix that.
http://www.jobacle.nl/?p=957
I also tried to use OCFS2 for OCR and VOTING disks, the installation completes successfully, however, the asm instance, registry, and few other services doesn't start. When I tried to reboot all the machines not a single oracle service came up. The crs just died because of OCR and VOTING disks.
I've tried so many things but nothing works.
My last installation was as follows:
==============================
VM: rac1, rac2, rac3
Config of each VM:
Memory: 4GB
Processors: 4
HDD (SCSI): 25GB
/dev/sda1 > /boot (100M)
/dev/sda2 > swap (8G)
/dev/sda3 > / (17G)HDD2 (SCSI): 60GB (Persistent)
/dev/sdb1 > ocrvot1 (2G)
/dev/sdb2 > ocrvot2 (2G)
/dev/sdb3 > ocrvot3 (2G)
/dev/sdb4 > data1 (10G)
/dev/sdb5 > data2 (10G)
/dev/sdb6 > data3 (10G)
/dev/sdb7 > fast1 (10G)
/dev/sdb8 > fast2 (10G)HDD3 (SCSI): 60GB (Persistent)
/dev/sdc1 > ocrvot4 (2G)
/dev/sdc2 > ocrvot5 (2G)
/dev/sdc3 > ocrvot6 (2G)
/dev/sdc4 > data4 (10G)
/dev/sdc5 > data5 (10G)
/dev/sdc6 > fast3 (10G)
/dev/sdc7 > fast4 (10G)
/dev/sdc8 > fast5 (10G)NIC 1: Bridge
NIC 2: Bridge
Pre-requisites completed.
ASM Disks labeled.
runcluvfy succeeds for all nodes
All nodes can see and write to the ASM disks.During the installation of GI 11.2.0.2 at prerequisites test got one error:
PRVF-5449 : Check of Voting Disk location "ORCL:(ORCL:)" failed
However, according to Metalink, note ID 1267569.1, its a bug and its going to be fixed in 11.2.0.3. The note gives a workaround which is the manual testing of the ASM disks from all the nodes and as long it succeeds we can ignore the error. Therefore, I just ignored the error and carried on. When prompted I executed the first script, "/u01/app/oraInventory/orainstRoot.sh ", on all the nodes successfully. The second script, "/u01/app/grid/11.2.0/root.sh" completes successfully on rac1, however, fails on the rest of the nodes.
On rac2 the alertrac2.log contains the following errors:
CRS-5019:All OCR locations are on ASM disk groups [OCRVOT], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/grid/11.2.0/log/rac2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".and oraagent_oracle.log contains the following errors:
2011-07-15 22:53:47.748: [ora.asm][1090414912] {0:0:215} [check] checkCrsStat 2 CLSCRS_STAT ret: 1842011-07-15 22:53:47.748: [ora.asm][1090414912] {0:0:215} [check] clsnUtils::error Exception type=2 string=
2011-07-15 22:53:47.748: [ora.asm][1090414912] {0:0:215} [check] AsmAgent::checkCbk: Exception UserErrorException
2011-07-15 22:53:47.748: [ora.asm][1090414912] {0:0:215} [check]
2011-07-15 22:53:47.748: [ora.asm][1090414912] {0:0:215} [check] InstAgent::check checkCounter 0 prev clsagfw_status 1 current clsagfw_status 4
2011-07-15 22:53:48.599: [ AGFW][1117755712] {0:0:166} Agent received the message: AGENT_HB[Engine] ID 12293:1089
2011-07-15 22:53:48.755: [ COMMCRS][1128261952]clsc_connect: (0x10c5d5b0) no listener at (ADDRESS=(PROTOCOL=IPC)(KEY=CRSD_UI_SOCKET))
On rac1:
========
[root@rac1 bin]# ./crsctl status res -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.OCRVOT.dg
ONLINE ONLINE rac1
ora.asm
ONLINE ONLINE rac1 Started
ora.gsd
OFFLINE OFFLINE rac1
ora.net1.network
ONLINE ONLINE rac1
ora.ons
ONLINE ONLINE rac1
ora.registry.acfs
ONLINE ONLINE rac1
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rac1
ora.cvu
1 ONLINE ONLINE rac1
ora.oc4j
1 ONLINE ONLINE rac1
ora.rac1.vip
1 ONLINE ONLINE rac1
ora.scan1.vip
1 ONLINE ONLINE rac1
On rac2
========
The alert+ASM2.log has the following errors:
SQL> ALTER DISKGROUP ALL MOUNT /* asm agent call crs *//* {0:0:215} */
NOTE: Diskgroup used for Voting files is:
OCRVOT
Diskgroup used for OCR is:OCRVOT
NOTE: cache registered group OCRVOT number=1 incarn=0xee7b8cf5
NOTE: cache began mount (not first) of group OCRVOT number=1 incarn=0xee7b8cf5
NOTE: Loaded library: /opt/oracle/extapi/64/asm/orcl/1/libasm.so
NOTE: Assigning number (1,0) to disk (ORCL:OCRVOT1)
NOTE: Assigning number (1,1) to disk (ORCL:OCRVOT2)
NOTE: Assigning number (1,2) to disk (ORCL:OCRVOT3)
NOTE: Assigning number (1,3) to disk (ORCL:OCRVOT4)
NOTE: Assigning number (1,4) to disk (ORCL:OCRVOT5)
NOTE: Assigning number (1,5) to disk (ORCL:OCRVOT6)
ERROR: no PST quorum in group: required 3, found 0
NOTE: cache dismounting (clean) group 1/0xEE7B8CF5 (OCRVOT)
NOTE: dbwr not being msg'd to dismount
NOTE: lgwr not being msg'd to dismount
NOTE: cache dismounted group 1/0xEE7B8CF5 (OCRVOT)
NOTE: cache ending mount (fail) of group OCRVOT number=1 incarn=0xee7b8cf5
NOTE: cache deleting context for group OCRVOT 1/0xee7b8cf5
GMON dismounting group 1 at 2 for pid 23, osid 19831
NOTE: Disk in mode 0x8 marked for de-assignment
NOTE: Disk in mode 0x8 marked for de-assignment
NOTE: Disk in mode 0x8 marked for de-assignment
NOTE: Disk in mode 0x8 marked for de-assignment
NOTE: Disk in mode 0x8 marked for de-assignment
NOTE: Disk in mode 0x8 marked for de-assignment
ERROR: diskgroup OCRVOT was not mounted
WARNING: Disk Group OCRVOT containing configured OCR is not mounted
WARNING: Disk Group OCRVOT containing voting files is not mounted
ORA-15032: not all alterations performed
ORA-15017: diskgroup "OCRVOT" cannot be mounted
ORA-15063: ASM discovered an insufficient number of disks for diskgroup "OCRVOT"
ERROR: ALTER DISKGROUP ALL MOUNT /* asm agent call crs *//* {0:0:215} */
SQL> ALTER DISKGROUP ALL ENABLE VOLUME ALL /* asm agent *//* {0:0:215} */
Any help would be appreciated. Thanks.
Still miss those days when Oracle used to release easy to use and easy to install softwares, but now thats not the case. Grid Infrastructure, Grid Control, and other similar technologies have become so complicated and difficult for us to install on VMs and play with them.
Kashif.
Updates:
Metalink doc, Oracle Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1], shows similar errors that I've in my log files. Therefore, I thought Multicast could be the culprit. Nonetheless:
[oracle@rac3 mcasttest]$ ./mcasttest.pl -n rac1,rac2,rac3 -i eth0,eth1
########### Setup for node rac1 ##########
Checking node access 'rac1'
Checking node login 'rac1'
Checking/Creating Directory /tmp/mcasttest for binary on node 'rac1'
Distributing mcast2 binary to node 'rac1'
########### Setup for node rac2 ##########
Checking node access 'rac2'
Checking node login 'rac2'
Checking/Creating Directory /tmp/mcasttest for binary on node 'rac2'
Distributing mcast2 binary to node 'rac2'
########### Setup for node rac3 ##########
Checking node access 'rac3'
Checking node login 'rac3'
Checking/Creating Directory /tmp/mcasttest for binary on node 'rac3'
Distributing mcast2 binary to node 'rac3'
########### testing Multicast on all nodes ##########
Test for Multicast address 230.0.1.0
Jul 15 23:57:30 | Multicast Succeeded for eth0 using address 230.0.1.0:42000
Jul 15 23:57:31 | Multicast Succeeded for eth1 using address 230.0.1.0:42001
Test for Multicast address 224.0.0.251
Jul 15 23:57:32 | Multicast Succeeded for eth0 using address 224.0.0.251:42002
Jul 15 23:57:33 | Multicast Succeeded for eth1 using address 224.0.0.251:42003
Hence, the issue is not multicast related.
Kashif.
Edited by: Kashif Khan on Jul 15, 2011 9:00 PM

Kashif Khan wrote:
THE ISSUE HAS BEEN RESOLVED!
With the same configuration the installation completed successfully on Oracle's Virtual Box. I had a lot of issues while installing Grid Control 11g on VMware, but, that got installed successfully as well on the Virtual Box.
Hence proved, VMware is no good for Oracle virtualization any more.
Hi,
Good if you have it resolved. Now could you please mark the thread as answered to avoid confusion
Cheers

My iMac wouldn't turn on. This has happened out of nowhere, it was working really well before. checked my power cord and outlets everything's fine. The iMac has no power at all. no sound or anything, completely dead. It is only 1 year and 2 mos old.

My iMac wouldn't turn on. This has happened out of nowhere, it was working really well before. checked my power cord and outlets everything's fine. The iMac has no power at all. no sound or anything, completely dead. It is only 1 year and 2 mos old. Any idea what it could be?

I have purposely been ignoring your responses to my posts about the heat issues in the newer design iMacs, but if you want really want to ague the point...
First, the iMac is marketed as a desktop model Mac. Not a laptop or MacBook.
I have never owned a MacBook, so I can't attest to how much heat the MacBooks generate.
I Have two iMac models. A 2009, 27 inch screen iMac for myself. And a 2010, 21.5 inch screen iMac for my Fiancée.
As a desktop Mac these are hottest running desktop Macs I have ever owned. Period. I owned two beige Macs, a pre-G3 tower, aG3 desktop, a G4 MDD Tower, the original iMac, eMac, iMac G4 and now my current iMacs.
None of my previous Macs have ever, EVER ran this hot. I have never, also, had any component failures in any of the previous Macs I have owned, either. All of my Macs have been upgraded or modded to some degree over the years. About 2 years ago I had to press my old G3 back into service. Both my G3 and G4 models have been heavily modded. The G3 ran without issue for a close friend for over a year until that friend went out a got a Mac Mini.
That's a 1996-97 Mac my friend. And it still is in working order and hasn't had any failures.
The fact I am pointing out here is that heat is an enemy to electronic components.
Whether desktop iMac or MacBooks, tightly packed enclosures of heat generating computer components with fans that do not run fast enough at most times to cool off the interior or exterior, will and does slow roast computer components to premature failure.
I do not know how frequent component failure is in the MacBook line up. So I can't attest to those.
I do not participate in those forums.
This is why at some point in computer history, Super Conputers were liquid cooled. PowerMac G5 systems were liquid cooled because they ran too hot!
I have taken my own precautions to keep my iMacs' heat down as much as possible.
I don't have the money to keep buying a new Mac every 3-5 years when some catastrophic failure happens.
I had to purchase my iMacs used as I couldn't afford the cost of a new iMac with the specs I needed.
My idea, your idea and Apple's idea of acceptable operating temps we can argue all day long.
I feel, personally, that the operating temps are too high and exacerbate operational issues.
I Have been participating in these particular iMac forums for just over a year and have seen plenty of posts of iMac component failures due to both heat and dust, dirt issues from within the iMac.
There can be no other reason for all of these failures. The SuperDrive is, usually, the first to go bad.
It's probably due more to its vertical mounting, but the excessive interior heat isn't helping it.
Next to fail is the GPU. The last to fail, but the most expensive to fix, the Logic Board.
I Have seen plenty of posts in my last year here of all of these failures in iMac less than 5 years old and ,perhaps, a little older. 2008 model iMacs seem to have their issues, too!
Apple is focusing too much on design and aesthetics, rather than longevity of their products, I feel now.
A Mac isn't going to last 7- 10 years anymore.
I don't have stats and numbers. Just common sense.
This is my story and I am sticking to it. For what it's worth.

OBIEE 11g installation failed multiple times at Distributing Repository Configuration Step

Hi,
I am getting the following error during the Distributing Repository Configuration step in the OBIEE 11g 11.1.1.7 enterprise installation in Windows 8 system.
Severe: Element Type:Domain
Element id: null
Operation result: failed to obtain domain file lock
Detail Message: java.util.concurrent.timeoutException.Timeout;
waiting for lock: Domain config lock;
c:\OBIEE\MIDDLE~1\USER_p~1\domains\EAM_DO~1\config\FMWCON~1\biee-config.lock;[121 secs]
Step Distributing Repository failed
Configuration Action 'Distributing Repository' has failed. Please check logs for details.
Step Distributing repository failed
I checked another blog for this https://forums.oracle.com/thread/2565716 and even there the explanation doesn't convince me.
I tried to look at the Locale of my system where I am installing and I could see it is using Eng-Us by default. One way suggested to check the Unicode format from the web browser and I could check that too to be UTF-8 as suggested by someone on some other blog.
I checked in the logs too as suggested by the Installation dialogue box but it didn't seem much conclusive too.
Here is the snapshot of the log file which I could found.
INFO: Current Inventory:
Oracle Home: OraDb11g_home1
This Oracle Home has not been changed in this session.
Oracle Home: OH1858390736
This Oracle Home has not been changed in this session.
Oracle Home: OH440082373
This Oracle Home has not been changed in this session.
Oracle Home: OH440082374
This Oracle Home has not been changed in this session.
Oracle Home: OH1597391518
This Oracle Home has not been changed in this session.
Oracle Home: OH1285215443
This Oracle Home has not been changed in this session.
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
Can someone please help me with this since I am stuck with for quite some time now.
Is there any way to check in command prompt to check the locale as required by the system.
What could be the issue here?
Thanks,
Nitin

Hi all,
We are able to resolve the above issue with the below solution.
Root cause of the issue:
You may have a temp directory in the path C:\Documents and Settings\user_name\Local Settings\Temp. You got the above mentioned exception because of the temp directory path having spaces_+ in it.
Solution:
1. Create a new directory called TEMP in a different location for ex: C:\TEMP
2. Now, Right click on My computer --> Properties --> Advanced --> click on Environment Variables.
3. You should be having TEMP and TMP as variables under user variables section pointing to the C:\Documents and Settings\user_name\Local Settings\Temp path.
4. Edit the TEMP and TMP variables and mention C:\TEMP in the variable value.
5. Deinstall and re-install OBIEE 11g.
Happy OBIEE 11g installation!!
Thanks,
Rajesh Gurram

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?

Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am trying to download Premier Pro, but it quits before installation completes. I have windows 7

I am trying to download Premier Pro, but it quits before installation completes. I have windows 7

What link, and which PPro... CS6 or Cloud?
The last I knew, CS6 download is one of the links on this page (2nd page)
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ

Oracle RAC 11g R2 installation complete installation guide

Hi,
Please suggest any oracle docs for Oracle RAC 11g R2 installation complete installation.
I am in process for installating Oracle RAC 11g r2 first time in my life this weekend.please help.

Hi Praveen,
Tim Hall has a perfect guide for installing Oracle RAC, you can review all the articles here:
http://www.oracle-base.com/articles/11g/articles-11g.php#db11g_release_2_installations
Consider also getting familiar with Real Application Clusters, because installing is only the very top of the solution and knowledge of how it works is a must:
http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_real_application_clusters
Regards,
Sve

Installation failed installation completed through some components failed to instal correctly

Hello i've been really exited to donload photoshop and so i decided to try the free version i downloaded creative cloud and went into th eapps and click on photoshop try it free i waited a few 30 mins and it stopped and told me this
installation failed installation completed through some components failed to instal correctly.
and then i was like whatttt?!?!?!?!?
so I decided to come here and ask why this is happening please answer ASAP I really need photoshop for important stuff!!!

Try restarting your computer, then try again. Awhile back, some of the apps which I think included photoshop require the microsoft runtime to be updated. That runtime requires a restart to finish installing. But since it is a piggyback program, the error code telling you do so is hidden in the log file.
If it still does not install let us know.

I try to download my premiere pro, but the installation is interupted at 84%, stating "installation completed though some optional components failed to download correctly (6). Please help!!!!

i try to download my premiere pro, but the installation is interupted at 84%, stating "installation completed though some optional components failed to download correctly (6). Please help!!!!
I purchased this tonight and im debating having a refund!

You may want to try using the Adobe Cleaner Tool and try downloading again:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Installation completed though some option components failed to install correctly

When I went to Install Premiere Pro from the Creative cloud I got a message saying
"Installation failed
Installation completed though some optional components failed to install correctly.
(6)"
There's a "More information" button that linked me to this text.
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF023, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Gio\AppData\Local\Temp\{0BB1038C-1194-4E3E-A8EA-8DE277D171E1}\PremierePro_8_LS2 0\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Required Common Fonts Installation x64 3.0.0.0 {7AD01D2D-A294-48FD-AD17-A04C59AEF734} -----------
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp01558740" Error 5 Access is denied.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 53)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 53)
Any suggestions?

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Download & Installing ERROR: "Installation failed; Installation completed though some optional components failed to install correctly. (6)"

"Installation failed; Installation completed though some optional components failed to install correctly. (6)"
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86).
Any ideas on how to fix this problem?

Go to Control panel>> Uninstall a program>> Uninstall Microsoft Visual C++ 2012 and restart the machine.
After restarting try the installation.

Download Failed:Installation completed though some optional components failed to install correctly

When I try to download Lightroom CC and Photoshop CC I get this error: Installation completed though some optional components failed to install correctly

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Installation completed though some optional components failed to install correctly.(6)

while installing Photoshop cc" installation completed though some optional components failed to install correctly.(6)" this massage appear close to 82% download my free trial of one month. can you help me ?

Go to Control panel>> Uninstall a program>> Uninstall Microsoft Visual C++ 2012 and restart the machine.
After restarting try the installation.

Before 11g installation complete, power failed

Similar Messages

Maybe you are looking for