Before After comparison in PSE 2.0 in standard edit mode

Just a simple question : How do I get to a before after comparison on-screen, at the same time, for editing ?. Quick Fix automatically provides this, but what about when you are not in Quick fix, but rather in standard edit (I think that's what it's called) mode ?. Thanks for your help.

John,
In PSE2 you can do Image>Duplicate Image, which will create a new file with "copy" appended to the name. Then position the 2 images side-by-side, activate the original and make your changes and you have the original (the copy) to compare against. When you are finished you probably just want to close the copy version without saving.

Similar Messages

  • Allow movement of split location in before/after comparison

    It would save me a lot of time if the before/after split location was movable. If I'm developing a portrait of two people, the split usually goes right between the two people, so I can't get a good feel for how the after affect "the other" person. Also, for off-center shots, the split does no good at all to help adjust the subject.

    Hi,
    Refer report MB51
    here in selection screen enter mvmt types 313 and 315 and execute
    Here add following fields in layout;
    Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

  • Before and after comparison in PSE 6

    Can someone tell me how to do a comparison of an edited version to the original in PSE 6 for Mac? It's easy to do in quick edit but what about when editing in full edit?
    Thanks!

    I handle this in another way. I routinely duplicate the background layer, shut off the visibility of the background layer, and work on the background copy layer. Certain functions of the program don't work on the background layer anyway, and this obviates this constraint. Not everyone subscribes to this work flow, but that is ok,
    I crop and establish resolution at this stage, as that pertains to all layers. However, I apply adjustment layers and other enhancements to the background copy layer.
    In order to get  before and after visualization, one can:
    A. Shut off visibility of all the newly generated layers individually, and look at the original background layer
    B. Merge all visible layers, and toggle between this package and the background layer. Note that I do not flatten at this stage.
    C. Create stamp visible layer at the top of the stack (CRTL+SHIFT+ALT+E) and toggle using this.

  • After Slipstreaming Updates Acrobat Pro Extended shows "STANDARD" edition

    Hi to everyone.
    I slipstreamed all Adobe acrobat 9 Pro extended updates up to 9.3.3. it is showing  ' pro extended version' everywhere except when i click on the - help menu -> about acrobat 9 pro extended, and the pop up window shows - Adobe Acrobat 9 Standard.
    I slipstreamed for about 3 times thinking there was an error somewhere. I installed adobe acrobat 3 times and the help menu still shows "Standard" edition.
    I used this command:
          eg:    msiexec.exe /a Acro3d.msi /p C:\AIP\AcrobatUpd933_all_incr.msp
    Acrobat just works fine, but it's wired to show Standard edition when it is Pro extended.
    Does it have to do with slipstreaming? If not can anyone help me with this issue Please?
    Thank you

    Hello
    Can anyone Please tell me which file/dll/exe is in charge for showing in the 'About" menu:
    Adobe Acrobat 9 Standard/Pro/Extended....?
    Thanks

  • Not showing company list after installing B1 2007 on windows 2003 standard

    Hi gurus,
    I am facing a problem regarding B1.System not showing  company list after installing B1 2007 on windows 2003 standard edition.
    Plz help me.
    Thanks in advance
    Regds
    Maddy

    Hi Maddy,
    Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
    Vasu Natari.

  • Fields are still in EDIT mode even after Saving the Transaction in UI

    Hello Experts ,
    We are facing one problem in UI .
    We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
    We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
    Can anyone give some pointers/solution to this ?
    Regards
    VB

    Hello,
    if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
    There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
    But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
    But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
    Best regards
    Manfred

  • Before/after view

    Hi, I am running LR 4.3 on an iMac, everything ok apart from the Before/after view seems to have lost the symbol of the full picture which you click on to return to the main picture that you are working on. Any ideas please?
    LEAVE ME ALONE! Ihave found the problem, little triangle far right, near sync metada, I had the wrong view mode!! This is my first week on this. Thanks

    I thought of it as nice feature when I found out. Very helpful.
    Alexander.
    Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

  • How to Run Operating System Command Before/After Message Processing SAP PI

    Hi,
    We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
    When we use single command say for example cp or mv (copy or move) the commands get executed fine.
    eg: cp %F /var/opt/data/outbound/Test/Dummy.txt 
    /this works fine/
    when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
    eg:
    cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
    or
    wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
    Is it possible to execute multiple commands or redirect the output  of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

    Hi Harleen,
    try like this
    cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
    instead of semicolon try this
    (1) &
    command1 & command2
    Execute Command1 and then execute Command2
    (2) &&
    command1 && command2
    Runs the command2 only when command1 doesn't Complete successfully
    (3) ||
    command1 || command2
    Runs the second command if the first command had an error
    (4) ()
    (command1 || command2) || (command3 & command4)
    Defines the order in which commands are to be executed
    Regards
    Suraj

  • Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

    Hello,
    I am using 11g impdp to create a test system.
    I use this cmd to import
    impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
    Then I get this error for all the triggers
    ORA-39083: Object type TRIGGER failed to create with error:
    ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
    Failing sql is:
    CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
    BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
    FOR EACH ROW
    BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
    As you can see, the trigger does contain the word "before".
    When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
    CREATE TRIGGER PS_HISTORY
    BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
    FOR EACH ROW
    BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

    same error, thanks for your attemp
    Error starting at line 1 in command:
    CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
    BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
    REFERENCING new AS new
    FOR EACH ROW
    BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
    Error report:
    ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
    04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
    *Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
    *Action:   Specify either BEFORE, AFTER or INSTEAD OF.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Question about the Before/After/Test metadata tags

    i think that i have read all of the appropriate sections on the wiki but i am a little unclear on how/when i need to add extra info to the Before/After/Test metadata tags.
    thus far, i have not done any unit tests that require a component to be added to the display list.  i was reading the section on how to do that and i see that all of the above mentioned tags have extra info:
    [Before( async, ui )], [After( async, ui )] and [Test( async, ui )]
    what do those do and when/why do i need to use them?
    thanks
    additionally, i am trying to run this simple example derived from what's on the wiki and it always times out.
    package HM.FO.User {
    import mx.controls.Button;
    import mx.events.FlexEvent;
    import org.flexunit.Assert;
    import org.flexunit.async.Async;
    import org.fluint.uiImpersonation.UIImpersonator;
    public class UserWindowPresenterTest {
    //protected var window:UserWindow;
    protected var button:Button;
    [Before( async, ui )] public function setUp():void {
    //this.window = new UserWindow();
    this.button = new Button();
    //Async.proceedOnEvent( this, this.window, FlexEvent.CREATION_COMPLETE, 20000 );
    Async.proceedOnEvent( this, this.button, FlexEvent.CREATION_COMPLETE, 20000 );
    //UIImpersonator.addChild( this.window );
    UIImpersonator.addChild( this.button );
    [Before( async, ui )] public function tearDown():void {
    //UIImpersonator.removeChild( this.window );
    //this.window = null;
    UIImpersonator.removeChild( this.button );
    this.button = null;
    [Test( async, ui )] public function on_user_saved_clears_password_fields():void {
    // this.window.pass_txt.text = "foo";
    // this.window.pass_confirm_text.text = "bar";
    // var presenter:UserWindowPresenter = this.window.presenter as UserWindowPresenter;
    // presenter.on_user_saved( null );
    // Assert.assertNull( this.window.pass_txt.text );
    // Assert.assertNull( this.window.pass_confirm_text.text );
    Assert.assertTrue( true );

    Okay, so the async modified is used to indicate that the asynchronous statement will be used.
    There is a bit of overhead adding async to tests, so, we don't actually instantiate the code that handles Async unless the async attribute is in the Before, After or Test. If you don't place the async in these tags [Test(async)] and attempt to use the async code. Async.whatever... you will get an error.
    Regarding the ui, attribute, the same concept was intended to apply for ui elements... in other words we wouldn't build the necessary infrastructure.. that is an optimization and right now is not in play. so you will not see different behavior with or without the ui.
    If I copy your code directly from below and paste it in my environment it passes.
    Mike

  • Mailbox database size before & after backup

    Hi there
    i recently made a similar thread and someone told me that i should do it here so here is my issue :
    i've been assigned to do a specific report related to exchange and its backup 
    so what we want is a report that would give us the global size of all our mailbox databases before and after the backup ( even the size of the logs before and after)
    (example : we have a mailbox database X: , we need to go inside the data folder, and retrieve the size of the .edb
    then do the same thing with the logs, go inside the logs folder, and retrieve the logs size )
    i was wondering if anyone ever managed to pull a script that does similar things, given the fact that i ve never worked with powershell and my knowledge is kinda limited in that area
    Thanks

    Hi Amassuo,
    for finished scripts that do things, check out the
    gallery. If you want to learn powershell (I might be biased, but I highly recommend it), check out the
    learning center.
    Regarding your specific issue, you can check the free space on a specific disk by running this powershell command:
    Get-WmiObject win32_logicaldisk -Filter "DeviceID = 'C:'" | Select -ExpandProperty FreeSpace
    Comparing before/after will get you the space differential (adapt drive letter in filter as needed).
    Cheers and good luck with your script,
    Fred
    There's no place like 127.0.0.1

  • BUG Before/After Function stopped working after Convert Photo to DNG

    Hi,
    I just converted all my photos to DNG using Lightroom's Convert Photo to DNG function and the Before/After " \ " function (in Develop module) is not working anymore... same problem in Lightroom 3.0
    regards,
    Danny

    I processed a Nikon .nef raw file in Lightroom
    .  Then I went to the Library Module under
    Library and chose Convert to DNG.  After the conversion
    the complete history was still available.  However, the Before/After function using \ or Before/After Views did not work.  It was necessary to click on the History State to compare views.  Using the Before/After Views, the original could be compared to the processed view by clicking on the Import state.
    This will not be a problem if the files are converted to DNG during initial import.
    I also recommend backing up originals and all processed files along with the Lightroom database on a least two drives on location and another off-site.

  • Oracle 12c migration (performance before/after checks) - suggestion needed

    Hello Experts;
    We are going to upgrade our database to 12c from 10.2.0.4 via manual migration (direct migration is from 10.2.0..5) as per documentation:
    http://www.oracle.com/technetwork/database/upgrade/upgrading-oracle-database-wp-12c-1896123.pdf
    I cannot find any guidance or tutorial for testing - how we should check our processes (performance, resource usage) before and after.
    Could you please suggest a way for testing before/after for our production processes?
    Thanks in advanace for your reply.
    Regards,
    Bolo

    What to test from performance perspective is very generic thing and answer lies in what is important in your application and what are the performance expectations around those important functionality.
    Since applications could be of different nature like- OLTP, DSS. Your requirement could also differ accordingly. In short business must be looking at no impact situation from this upgrade. There are many ways it can be ensured. More accurate way means more money and effort. e.g. You can use Real application testing option to test the production like workload in 12c and see the impact. This requires effort around setting up and using this option and license fee. You can use other available tools like load runner etc.
    In other option, you can do performance baseline on existing 10204 database  and then compare it with performance baseline in 12c database. Directly doing it in prod will make most sense since then you are actually doing it real data volume and workload but it is most risky in the situations where performance degrades for something very important.
    Henceforth it is recommended to run the performance baselining on non-production environment which is production like. By production like, I meant having same data as production (to get this, database refresh is very much recommended), similar workload as production (this criteria becomes more important in OLTP systems) and similar H/W, OS and Database configuration as Production. If you can't do so then your approach is not risk free.
    In any case, you will have option of quick database tuning using ADDM, SQL tuning advisor and AWR etc.
    Hope it helps.
    Thanks,
    Abhi

  • Page Break Before / After

    Hello All,
    In MS Office word, Insert > break made to page break.
    In the Report, I have challenges in the Page Break Before / After.
    If any one help me out, it will be great.
    Thanks in advance,
    REF:
    Tool
    Property Inspector
    Object Navigator
    Report Editor
    Template Editor
    General layout
    Page Break Before
    Page Break After
    Page Protect
    Advance Layout
    Print Obeject On

    the picture worth a thousand wordsDon't you think it would be better to tell us what your problem is? So you changed the property to 1. And now? Does it work? Does it not?

  • How to remove line space before/after paragraph in Photoshop Elements?

    I am using Elements 12 and want to remove the extra spacing that is automatically inserted between paragraphs after a hard return.  Is there some way to adjust the extra spacing before/after a paragraph in Elements?

    Try resetting the tool (the little arrow next to four lines in the Text Options panel). Setting the leading manually works fine for me in PSE12 with hard carriage returns,
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Maybe you are looking for