Before and After View

When I'm in my Develop module and I look at some of my edited photos my before and after view is not showing.  Sometime I see the original for a second then it resorts to the edited.  Now this is happening to some of my collection cause in some collection they are working just fine.  Can some explain to me what is happing.
thanks

That's not it. I'm not sure what your talking about or we are talking about two different things. All the files in the collection are before and after are the same this is evident on some other folder in the collection.
I think I figure out the problem
Go to the History located  on the left side of your canvas, above the Copy and Paste buttons.  You should see Preset, Snapshot, History and Collection.  They should have a + beside to expand.  Go to History (this is a list of all you edits you made on the image) Go to the bottom where it says import of the file. This is the start point of your file.
Right mouse click on the import xxxx xxxx file ( or how ever you saved your file name). Highlight "Copy History Step Settings to Before."
There you go your good to go
I don't know how to do this on all the images with this problem in the folder all at once.  I just do it individually.

Similar Messages

  • Merge to hdr pro before and after views

    After making adjustments with the sliders in the HDR  Pro dialog, is there a way to goggle before and after views of the merged image?

    Zeno,
    Thanks. I tried converting to 32bit/channel while in the Merge to HDR dialog, then opened the image in Photoshop, but still don't see how to get a before/after preview. How does this work exactly?

  • Mis-matched color in Before and After views

    I recently purchased and installed LR 2.1 on a new HP 2.4 gb Vista 64 bit. 4 gb mem. Nvidia GeForce 9300GE card. Single LCD monitor. All updates installed.
    While looking at an unedited Canon raw file in before and after I noticed that the gray was a little darker in the before view than in the after. I created a gray image in PS CS3 and took a look and it was the same.
    This view can be very helpful but misleading if the colors will not match.
    Any suggestions to a cure?
    Thanks, Richard

    Try generating a Matrix profile instead of a LUT-based profile (a setting in the i1 software I believe). Somebody else reported a problem in shadow colors when using LUT-based profiles.
    There can be a difference because the before view is based on the preview which is usually stored as a jpeg in adobeRGB space and the after view is rendered from the linear prophotoRGB space that Develop uses. It is possible that you're simply looking at artefacts because of that.

  • Develop mode before and after shortcut for 2nd monitor?

    I'm working in Develop mode and am trying to find the before and after shortcut for my 2nd monitor? the "\" shortcut works only on my main monitor. I am using my 2nd smaller monitor for color correction hence the need for the before and after option on my  2nd monitor.

    I think, but I'm not sure, the only way to do that is to move the LR main screen to that second monitor. The before and after view always happen in the main LR screen.

  • Crop - before and after

    I'm working on some photos that have various regions that I'd like to crop. Once I've cropped a region I'd like to see a pre-crop view so I can see if there's another region that's worth cropping. I was hoping to do this in the before and after view. Is this possible anyway?

    Before/after won't show the before view without a crop. This is by intention, because comparing other adjustments would be hard if the crop also changes in the comparison.
    If you want to see the pre-crop version, click onto the history step before the crop (or the import one).
    Beat Gossweiler
    Switzerland

  • Show before and after in primary in room in color

    I am using Color in FCP7
    Can anyone tell me how to show how an was BEFORE it was colour corrected in the Primary In room in Color?
    i.e I want to see the before and after view, in the Primary In room
    Can you inform me how to do this please
    It's easy in fcp7 just untick a box....

    CMD-G toggles between corrected and uncorrected.

  • "Effects" before and after

    Hello all,
    Is there anywhere I can go to see the "before" and "after" views of all effects? I am not yet familiar with all of the effect jargon, so if something like this exists it would save alot of time! (if it doesn't exist, I'm sure you guys could make loads from advertising as ppl like me would flock to those pages en masse).
    Thanks,
    Christie

    The effects previews in Illustrator are not as advanced as in Photoshop. For example you have a outer glow effect, you turn preview on, all works great. now turn the preview off, and it is still on. So you cant toggle for most of them.  In sumamry Illsutrator effects previews can be buggy.
    For the bitmapped effects I try to do them instead in Photoshop. EG: Outer glows distance and lightness are more accuratey previewed in Photoshop, even if you have doc raster settings set to 300 dpi. . Glow in Illustrator does not have a distance setting either, Illustrator slows down when using bitmapped effects.

  • Elements 9 - Before and After Picture View?

    I like working on photos when I can see the original picture on the left and the picture I'm editing on the right so I can 'see where I'm going' with my changes.
    I'm currently trying out Elements 9.
    When I work with the 'Guided' or 'Quick' Editing sections (right side) I have a drop down box that gives me the following options after the word View on the left side: 'Before Only', 'After Only', 'Before and After Horizonal', and 'Before and After Vertical'.
    But when I go to the 'Full Edit' mode that drop down box disappears.
    How do I get a Before and After Photo to show on the screen when I'm in 'Full Edit Mode'?
    Thank you for your help.
    TripleB

    Simply use a duplicate layer or adjustment layer before starting your edits and then you can click the eye icon in the layers pallet.
    You can click on and off to see before and after as you do more editing.
     

  • Split view for before and after changes?

    One feature I used to use a lot on Lightroom as where it would show a split view showing the image before and after changes (adjustments). I cannot find how to do this in Aperture - is it possible, what is this feature called?
    (and before any smart person tells me to look in help, I'm tired of responses like that. I've looked and didn't find, and that's why I'm asking here. I've tried Compare, and Before and After Changes etc.)

    Unfortunately, no, there is no ability to do the split view like Lightroom has. It's a nice feature.
    The closest you can do is to flip back and forth between two versions. Because when you view the master in aperture it shows the original file without crops and straightening, I suggest that once you crop and straighten, you then create a new version and work on that (this is as close as you can get to LR's "snapshot" functionality). You can then flip back and forth between the two versions to see the changes... but you can't see them side by side with a split.

  • Repairing permissions before and after updating software

    What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

    This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
    I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
    Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
    Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
    But, to each his own.
    HTH
    TiPB 867   Mac OS X (10.4.6)  

  • Oracle Alert: Access before and after update values of a table column

    We have a requirement where a notification needs to be sent when 'END_DATE' attribute (column in a table X) is set, in an Oracle Applications form.
    I have defined an Event based Oracle Alert which fires 'On Update' of the table X.
    Could anyone please let me know as how to access the value of 'END_DATE' before and after update (i.e :new.END_DATE and :old.END_DATE) in the sql query of the alert.
    The need to use the before update and after update values of the attribute 'END_DATE' is that if we add the condition END_DATE is not null, the alert is sent even if any other attrbutes are updated in the Oracle form which is not the intended behavior.
    Appreciate any help.
    Thanks

    Hi
    use selectionlistener for your first table then add clientlistener and serverlistener so that you will get the rows on click in back bean.
    then get second table vo and and create and add row for that view object. add partial target to refresh your second table from back bean.
    on click of save call commit operation.

  • Before and After insert or update rowcount

    Hi
    I have several extract objects procs which are calling various build objects procs which in turn are inserting or updating the tables...now when i run these objects sometimes i get no errors and everything seems to be running perfectly but the tables do not get updated ? now what i am trying to achieve here is get some kind of summary where i can see the before and after rowcount..for that i have created a table of every extract object proc and another table with the coressponding tables being updated by tht proc...can anyone pls tell me how should i look into these procs and how do i get the rowcount for a particular table before and after the procedure was run ?
    Thanks a lot in advance

    Hi,
    On which version of RDBMS are you working , because if you're on 10g then just enable auditing or even FGA on the tables were you want to see the changes,
    Then query the DBA-AUDIT (not sure of the name anymore) view.
    If not then create a audit package yourself.
    something like
    create or replace package pck$audit as
    procedure prc$check_tablecount(p_tablename IN VARCHAR2, p_status IN VARCHAR2);
    end;
    create or replace package body pck$audit as
    procedure prc$check_tablecount(p_tablename IN VARCHAR2,p_status IN VARCHAR2) IS
    sqlstr VARCHAR2(100);
    v_count NUMBER;
    begin
    sqlstr := 'SELECT COUNT(*) FROM '||p_tablename;
    EXECUTE IMMEDIATE sqlstr into v_count; --could by 'using v_count' check syntax for this
    INSERT INTO audit_table(table_name,total_count,status,time_stamp)
    VALUES(p_tablename,v_count,p_status,SYSTIMESTAMP);
    COMMIT;
    end;
    end;
    you can elaborate on this creating additional procedure checking differences in total_count on same table at same time.
    Now call this procedure before starting your insert-delete- on your table make sure you put the parameters correct eg p_status => 'begin procedure'
    and call it again after your commit in your procedure.
    Hope this helps you out
    Erwin

  • Do we have a way to get the differences between xtext model before and after partial parse?

    Do we have a way to get the differences between xtext model before and after partial parse?
    As an example i have file contains 4 lines, xtext parsed this file and generated its model, then i made small modification in line number 3, so xtext partially parsed the file and generated another model.
    The question is could we get the nodes that has been deleted from the model?
    could we get the new nodes added to the model?
    could we get the differences between the two models?

    Workflow {
    bean = StandaloneSetup {
    scanClassPath = true
    platformUri = "${runtimeProject}/.."
    // The following two lines can be removed, if Xbase is not used.
    registerGeneratedEPackage = "org.eclipse.xtext.xbase.XbasePackage"
    registerGenModelFile = "platform:/resource/org.eclipse.xtext.xbase/model/Xbase.genmodel"
    component = ParseXextModel{
    //Load the xtext model and keep the reference of the inmem model
    component = DirectoryCleaner {
    directory = "${runtimeProject}/src-gen"
    component = DirectoryCleaner {
    directory = "${runtimeProject}/model/generated"
    component = DirectoryCleaner {
    directory = "${runtimeProject}.ui/src-gen"
    component = DirectoryCleaner {
    directory = "${runtimeProject}.tests/src-gen"
    component = Generator {
    pathRtProject = runtimeProject
    pathUiProject = "${runtimeProject}.ui"
    pathTestProject = "${runtimeProject}.tests"
    projectNameRt = projectName
    projectNameUi = "${projectName}.ui"
    encoding = encoding
    language = auto-inject {
    uri = grammarURI
    // Java API to access grammar elements (required by several other fragments)
    fragment = grammarAccess.GrammarAccessFragment auto-inject {}
    // provides a compare view
    fragment = compare.CompareFragment auto-inject {}
    component = ParseXextModel{
    //Load the xtext model again and keep the reference of the inmem model
    component = CompareModel {
    //Implement this using EMF Comapre to see the differnces between 2 models
    }

  • An extra page prints before and after a page with the data, why?

    If I go to www.allrecipes.com, select a recipe and click on the Print button, FF prints an extra blank page before and after the recipe. The recipe is short and easily fits on a single page. I've changed all the print settings so that even the Header & Footer info is set to "Blank".

    I don't understand why blank pages are generated, but I can help you with a quick hack if you like. This will strip off everything but the actual recipe area so that you can streamline the printout.
    After you load the page and select your options:
    * Open Firefox web console using Ctrl+Shift+k
    * Next to the caret (>) paste the following script then press Enter to run it:
    var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]);
    * Close the web console by pressing Ctrl+Shift+k again
    When you preview the page, it should look ready for printing. Any luck?
    Obviously that's not very convenient if you print a lot of recipes from this site, so you could save the script as a bookmarklet. Here's how:
    First, copy this slightly modified script (select, Ctrl+c):
    javascript: var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]); void 0;
    Next, if you are not displaying the Bookmarks Toolbar, you can display it using either:
    * right-click a blank area of the tab bar > Bookmarks Toolbar
    * tap the Alt key > View menu > Toolbars > Bookmarks Toolbar
    Right-click on the Bookmarks Toolbar and choose New Bookmark.
    Paste the code into the Location box (the second box).
    Then type a useful name in the Name box (e.g., AllRecipes) and click Add.
    Now, when you want to hack the page, click the button to run the script.

  • L7680 Ejects Blank Page before and after print job

    My L7680 recently started to eject a blank page before and after a print job; seperator page option is NOT selected.  I tried all the suggested trouble shooting points in the HELP section but none have solved the issue. 
    This question was solved.
    View Solution.

    The setup button on the printer had a choice to return to all factory defaults - that solved the problem but it does take yoiu back to starting again to set other choices you may have made since starting toi use the devise.

Maybe you are looking for