Before I install Snow Leopard...

Will my Photoshop (CS2), my Acrobat Standard 7.0 and my Microsoft Office v. X -- all need to be upgraded if I install Snow Leopard? Adobe told me "yes" for their software. I haven't even asked Microsoft. Seems like a huge expense to upgrade all of these. Will I need to upgrade all and is it really worth it? Thanks, all.

CS2 is optimized for PPC and would use Rosetta and more memory plus that is 3 versions behind.
If you are happy with your software and it can do what you need, because otherwise I would plan on all those upgrades, which may push your hardware and end up feeling like you need a new system in a year or less.
On the other hand, upgrades are almost inevitable unless you needs stay the same.

Similar Messages

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger?

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?

McHagihara wrote:
Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
You can try to locate your problem without the erase and install method by running through this list of fixes.
Step by Step to fix your Mac
But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
Most commonly used backup methods
Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
How to erase and install Snow Leopard 10.6
If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
Yuo might need to install more RAM into the machine to make 10.6 run better as well.

I have new hard drive, should I use migration assistant before I install Snow Leopard or install Snow Leopard first?

I just had a new hard drive installed after a hard drive failure. I need to install Snow Leopard, Lion and VMware Fusion. Should I use migration assistant to reinstall my old files and applications first or should I install the new Operating Systems first? Some of the old files do have corrupt data and I will have to pick and choose what back-up files I re-install.

Pondini wrote:
memalyn wrote:
Some files were backed up on another external drive but not all.
How was that done? Drag & drop? An app like CarbonCopyCloner or SuperDuper?
Initially files were backed up on the iMac with Time Machine. I purchased a My Book external hard drive and after doing a full back up on it, I began doing all of my incremental back ups on it using Time Machine. Sometime later, I purchased a Western Digital external hard drive that included back up software on it called "WD Back-up" so I could use it to store all of my Music and Audiobooks on to keep my iMac and My Book free of those file types. The WD Backup software allowed me to pick and choose what files I wanted to back-up. I don't think I had been backing up Music and Audiobooks on the Mac anyway or maybe I was, I don't remember if I can selectively pick and choose files with Time Machine - I have not checked as I have not yet plugged it into my new hard drive. Once The My Book drive became full with regular back ups, around June or so I had to switch over to the WD Back up drive. I recall that I was very concerned that I could not do a full back up on the WD drive because if I did, I would have to reformat the drive and I did not want to do that, so I think I was able to selectively back up some additional files from my iMac but again, I do not know for sure since I have not looked at what is on the drive. I do know that if I was able to back up additional files I had to do it with WD Back up and not Time Machine, if that matters.
I know that the files in the partitioned drive and files associated with VMware Fusion are damaged. If I do a full restore, it will restore the VMware Fusion app and partioned drive
We need some clarification:
Do you mean there were 2 partitions on your internal HD? If so, how was the second one formatted? Was it backed-up?
No, there was only one partitioned drive. The way I understand it is the VMware Fusion software does the partitioning and the app resides on the Mac. After that was done, I then installed the Windows software on the partitioned drive. There is a critical file on the Mac under a Folder called Virtual Machines and in the Virtual Machines folder, the "Windows Bundle" or some such thing keeps locking each time the software crashes due to the problem files somewhere within the files in the VMware Fusion software that (I think resides) in the Windows environment that I cannot access. The Virtual Machine file on the Mac gets backed up so the Windows Bundles files get backed up and that includes all the screen shots (essentially backups) of the Windows environment. The Windows environment includes some of the apps and their data in Windows such as Quicken. Theoretically, the partitioned drive does not get backed up but in reality if the screen shots do, some of the partitioned drive does - corrupt or not. If you have a Quicken file open and a drop down screen in Quicken frozen when the system crashes, that is what gets backed up and there is no way you can get back into Windows or Quicken.
               If I do a full restore, it will restore the VMware Fusion app
If you restore an OSX volume, yes, that will restore all apps, but that's not necessarily bad. If necessary or desired, you can always delete or reinstall a suspect app. That way, all your other apps will be ok. For most users, reinstalling all apps is a considerable project. See Transferring Applications for an explanation.
Well, that is true. To reinstall VMware Fusion, Windows and Quicken would much, much easier than all of the Mac software I have. Plus, the VMware Fusion version I have is not compatible with Lion and my goal is to install Lion, so I will have to upgrade VMware Fusion no matter what. Further, I'm so aggravated with the dual operating system, I've been looking at products to replace Quicken, so if anyone knows of a good home, small business and home rental financial product they can recommend, I'm all ears!
               If I do a full restore, it will restore . . . and partioned drive
If there are 2 partitons, a full restore only restores the OSX partition. If a non-OSX partition was backed-up, it must be restored separately.
               Now that I've said I only have 1 partitioned drive, does that mean it will restore the partitioned drive? I would prefer it did not. It seems now that it would be much cleaner to restore the OSX drive. Would I be able to do that?
So, depending on the exact circumstances, your best be may be to restore the most recent OSX partition, then restore/copy those files that were backed-up on another drive; reinstall VMware if necessary; restore the other partition.
So . . . things may be a bit more complex than we though, but perhaps less dire.
More detail on the various partitions and backups should clarify things.

Strange behaviors on MacBook Pro before & after installing Snow Leopard

I am not sure if this is even a Snow Leopard issue. We have a MacBook Pro that up until recently had been running Tiger. A problem developed whereby we could not access the iTunes store. A message that the store was "not available at this time" came up repeatedly while at the same time another computer was able to make connections with it. In addition, when Firefox was opened, a prompt appeared to drag the Firefox icon to the applications folder. Even after this was done, the same prompt would appear during subsequent sessions.
We updated the OS to Snow Leopard, and the iTunes store problem was resolved. However, there are some other unusual things going on with other applications.
1. When Photobooth is opened, we get this message: "There is no connected camera."
2. When we open any of the Office applications, we are greeted with: "To open Microsoft Word (or Excel, PowerPoint, etc.), you need to install Rosetta."
3. The above-described issue with Firefox still occurs frequently. Even though Firefox is located in the Applications folder, there is now a volume named Firefox on the desktop. We can't get rid of it.
We don't know for sure if the Photobooth and Office issues were present right before the Snow Leopard installation, but they had worked properly in the past.
One thing we did do is a verify and repair of permissions. There were MANY that needed to be repaired.
In addition, right around the time SL was installed, the computer was frequently shutting off without warning. The mouse was also operating erratically. It was found that the battery needed to be replaced, as the existing one was expanding and was actually disrupting the operation of the mouse pad. Could this battery have been the source of these problems?
What are the next steps we should take?

I suppose your expanding battery problem could have caused some or all of these problems, but most of them sound like software issues.
If I were you I'd try a few things:
1. boot from your snow leopard install disk and repair your startup disk with disk utility.
2. repeat the repairs until no repairs are reported (the toilet paper principle).
3. repair permissions again.
4. if the problems persist, trash the preferences files for the misbehaving apps.
5. if the problems persist, delete the misbehaving apps and reinstall them.
6. it the shutoffs persist, try a PMU reset.
7. a PRAM reset would probably be a good idea too.
8. if none of that works, archive and reinstall.
there is a freeware utility called applejack that will also do most of this.
Details on all of these will be readily available with a google search.

Can't edit iCal events like before installing Snow Leopard.

When creating a New Event or trying to Edit an existing Event the title field isn't editable like before I installed Snow Leopard. If I try to click on the header field to edit it, the whole event box turns into a window with red & green buttons at the top and I STILL can't edit the title area! This doesn't make sense! Did something go wrong installing Snow Leopard? I've reinstalled it twice and still the same behavior. This can't be the way things are supposed to work editing events in iCal. I can edit the location and all the other fields in the event panel, but NOT the title. The only way I can try to edit the event title is by hitting the enter key and try to add characters before it switches to an un-editable field again.

Perhaps you've just updated your OS and now have the newer version of iCal which is ***** compared to the faster, more elegant older version. The older iCal presented every event's details in a ready to edit format just by clicking on the item in the calendar.
Now you have to double click that item you're interested in (one two) to get a window that shows you the item's details. Then, to edit, you must click the 'edit' button (three) upon which another editable window will allow your event details to be edited. Finally, after finishing your edits, you must click 'done' (four). Yes, that's right, 4 clicks to do what used to require only the initial click to specify which event you wanted to edit.
Four times as many clicks for a utility application that has no further improvements, only this annoying change from what was once a very efficient tool.
I do hope a future "update" will bring back the elegance of the older version with some true improvements.

How to install snow leopard on tiger

I need to update my MacBook Pro form tiger to snow leopard. How should I do? Thanks.

You need to purchase Snow Leopard from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
I suggest that before you install Snow Leopard you make a backup of your current installed system, then erase the drive and make a clean installation of Snow Leopard.

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details.

I'm about to install snow leopard on my 2006 macbook, OSX 10.4.11. I read that I'm supposed to copy my old OS to an external drive before hand. Why is this? What does it accomplish? If I upgrade to 10.6.3, why do I need a copy of my old 10.4.11?

I'm about to install snow leopard onto my 2006 macbook with OSX 10.4.11. I read that I should copy my old OSX to an external drive before I start. Why? What is the purpose of this? Once I have snow leopard, why do I want a copy of 10.4.11? Won't I be able to import what I need while installing?   Also, what is the point of partitioning my disk? I don't understand what that's for if I'm only going to run one OS on there. Any experience or advice is greatly appreciated.

It is always wise to have a copy of your latest working system ... preferably on an external drive.   As Neil says, you may run into trouble and if you do you can always return to the original situation and start again.
Once you have installed Snow Leopard (an excellent system if I might say so) then you probably won't need 10.4.11 though you can never have enough back ups in my opinion.   It's amazing how often a need arises.
Having a backup on an external drive allays the need to partion your hard iMac drive for the same purpose..

I am running Mac OS X and need to back up before installing Snow Leopard , can I back up to my Time Capsule?

I am running Mac OS X currently and need to upgrade to Snow Leopard. First I need to back up my computer. I have a Time Capsule that automaticallyt backs up Snow Leopard and above but do not have Time Machine on this system. How can I back up what I an currently running?

Do I download these? I am not particularly good at this, so any help would be great. What I know now is that it is recommended to back up current comuter before installing snow leopard, but I have no idea how to do this. I know I can go from 10.4.11 directly to Snow Leopard but am afraid I will lose data.

I installed snow leopard which I now realise that it was the wrong one because it came out before my laptop and now it won't changed from the grey screen with the apple on it how do I fix it ???

I installed snow leopard which I now realise that it was the wrong one because it came out before my laptop and now it won't changed from the grey screen with the apple on it how do I fix it ???

MacBook Pro
Apple - Support - MacBook Pro
Mac OS Version builds
When did yours come out? what does the above show as model and minimum build?
You should have yoru OEM OS X DVD, not one from another Mac, or retail, though the last retail OS X DVD was a year ago 10.6.3.
If it installed, I don't see an issue unless the drive had corrupt directory etc.
What you need to do is repair your boot drive or restore from backup.

How do I install Snow Leopard while keeping files, applications, and settings

I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
Install Snow Leopard while keeping files, applications, and settings
If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files. You may have to reinstall some applications, however.
Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c .
The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install.
When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer.
Update your system software to ensure that you have the most recent operating system components. From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
(105428)

Re-installing Snow Leopard

My computer's been giving me a series of problems (repeatedly unsuccessful software updates, irregular/now non-existent iphone sync, issues with VMware, etc) so I now want to re-install Snow Leopard and start fresh. I've been using Time Machine to back up my files and applications on an external hard drive.
If I re-install Snow Leopard from the boot disc and choose to not restore from Time Machine backup (i.e., just install a clean copy of OS X), will I still be able to retrieve my files from time machine onto the newly installed OS? I've already tried the "restore from Time Machine" option (from a backup well before the problems arose) and that didn't resolve the issues I was having so I don't want to just restore and have the same problems come up again. Any thoughts?? thanks!

kezeench wrote:
... I'd have to go through my time machine backup drive and select folders one at a time to restore (music, applications, etc)?
yes. if you want to bypass either +setup assistant+ or +migration assistant+, that's the way to go.
however, it is not recommendable to migrate applications that way. especially apps that come by way of an installer put files in various locations of your HD. unless you know exactly where those files are, you are better off reinstalling apps the usual way.
in fact, what i would do is this:
once the new OS is installed, i would migrate account(s), network settings, and documents using the setup assistant. then i would reinstall apps manually.
i did this not too long ago when i migrated from my old powerbook G4 to my new mini. since i migrated everything but apps, the pref files for the applications came over and i didn't even have to re-enter serial numbers.
JGG

How to install Snow Leopard on a 2009 Mac Pro which has Mountain Lion?

The 2009 Mac Pro that I just bought has Mountain Lion. For many reasons, I do not want to have Mountain Lion on my machine. I have been using Snow Leopard for years and I like it fine. I have my Snow Leopard install DVDs. I cannot get this machine to accept Snow Leopard, which must be just another undesirable aspect of Mountain Lion, bacause this machine must have shipped with some variant of Leopard/ Snow Leopard to begin with. Here's what happens when I put the Snow Leopard Install DVD in the Superdrive:
1) First, I held down the "C" key at startup to start from a disc. It showed me a window which said "Mac OS X can't be installed on this computer".
2) Then I started it with Mountain Lion and then put in the Snow Leopard DVD. Got a window which said "The disc you inserted was not readable by this computer". It also had 3 buttons to choose from: "Initialize", "Ignore" and "Eject". So I clicked on "Initialize" and Disc Utility opened on the First Aid page. I assume I'm supposed to erase the startup disc, but I thought maybe I should ask the experts here before I do that.
This machine has two 2TB HDDs that the previous owner has configured as a level 1 RAID. If I am to erase the startup disc do I erase both drives of the RAID set? If I'm not supposed to erase the startup drive, what do I need to do to get back to Snow Leopard? Thanks and thanks again!

The built-in checks will keep you from clobbering 10.8 Mountain Lion by Installing Snow Leopard over it (literally, 10.6 Snow Leopard Installer will see a later version in place, and knows it cannot install over a later version). So it says "Mac OS X cannot be installed on this computer..." and leaves off "... "in its current state."
You will need to Install on a 10.6 Snow Leopard-erased drive. Mac OS X Erase function proceeds to install a Partition scheme and a default Volume after erasing, because a truly blank drive is useless for most Users.
When you boot to the Installer DVD, you are running off the DVD, so all Hard Drives are available to be erased if that is your choice. All data on them will be discarded. If you erase one drive in a mirrored RAID set, normally the other drive would survive and the set would be degraded. But a new version of RAID was introduced right AFTER 10.6, and it is likely that 10.6 cannot read that RAID at all under any circumstances.

Why does my DVI to S Video adapter not work on my Macbook Pro since installing Snow Leopard?

The Apple DVI to S Video Adapter worked before installing Snow Leopard. Now I just get a blue screen.

.wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest.

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

Before I install Snow Leopard...

Similar Messages

Maybe you are looking for