Before insall oracle8.1.7 in win2000 pro ,what should i do first ?

i installed jdk1.3,set the classpath,
but when i click the setup.exe ,it's nothing to appear.
help me !!

bigkahunaintx wrote:
I think Parallels runs with in OS X.
This is correct. It also does not need to change any partitioning. I use Parallels to run Ubuntu Linux and love it.
Man, this screen is huge!!
Ain't it, though?
One place you might want to start is Apple's Switch 101 and Mac 101 web pages. Lots of good information there designed for just what you are doing.
Best of luck.

Similar Messages

HT201263 All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?

All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. What should i do?

I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. I have tried enable and disable restriction, connecting my phone to my laptop and sync from my computer and none of them is working. What should i do?

Often when this type of thing occurs with missing default apps it is due to a situation where you are unable to 'see' the apps. If you will go to your front display of your device go to settings>General>Reset>Reset Home Screen layout.
This reset allows for your apps that have for whatever reason been hidden in such an area as you arn't able to find them now to be returned to the area as which they were when you first had the device.
As far as the missing Apps that were purchased through the Apps Store if you will go to settings>itunes and Apps store and click where it reads about automatcally downloading apps clicking on the toggle switch AND clicking on the toggle switch which allows for cellular data to be enabled this then will effectively automatically download all apps to your device that was purchased from the App Store.
Good luck friend.

What should I check first before impdp the dump file?

I get a packaged Oracle 10.5 data pump exported file to import it into a new environment and set a new database.
I don't know the details in the dump file.
What should I check in advance before start to impdp the dump file?

jetq wrote:
I get a packaged Oracle 10.5 data pump exported file to import it into a new environment and set a new database.What is Oracle 10.5 ? Do you mean 10.2.0.5 ?
I don't know the details in the dump file.That's rather strange, what are you suppose to do then ?
What should I check in advance before start to impdp the dump file?First, try to generate a sqlfile within the impdp option sqlfile=, it won't import anything but will generate all the ddl the import will try to fire.
Nicolas.

Upgraded to Mac Pro- What should I change in FCP to use all 8 cores?

Hi
I went from a G5 to a new Mac Pro. What settings should I change to make sure I can take advantage of the speed from the 8 cores and 6 gigs of Ram and new Nvidia graphics card?
Thanks

There's little to do on that front. FCP will use what it can all by itself. Might look into a virtual cluster though for Compressor. Use the QMaster control panel to set this up... read on it here: http://www.macworld.com/article/49047/2006/01/marcchreateside.html
Jerry

I need more free space on BootCamp drive after installation of Windows 8 pro. what should I do?

Initially partitioned 18.6GB for BootCamp for Windows, now at least need 300MB free space. Would like to allocate 80 GB to Windows system . Should I uninstall windows 8 pro and start over again. Would it cause some damage to IMac?

> After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
If you would use the Toshiba forums Advantage search option, then you would find this info:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
+If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software+
+So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.+

TS1814 TS 1814: The same happens to macbook pro, whats should i do?

Restored I phone 4(firmware 4.2) to factory seeting but whenever i connect to itunes it says it can not connect to the update server(Phone can not connect to software update server), help please!
Note: I am using macbook pro and my company internet ports to update all the time.

If you've taken it back for the same problems over and over again, I suggest that you start asking for a replacement. Ensure that you've backed everything up to an ext HD and removed your personal data and information. IIRC, repeating problems warrant a replacement.

Spit water on macbook pro what should i do?

I spit on my mbp and i dont know what to do. It turned off right after i spit water on it i tried to dabb it off but it turned off .
It hasnt been on since. Its been off for about 5 days i also read online that if i hold the control command and power button all together then it will reset my mbp the sleeping light turned on then off but now every min or so the light just does a quick flash. And one more thing is that the charger still lights up when i plug it in and the lights on the side the little 8 green ones light up so please help

Water + electronics causes short circuits.
Kepp it unplugged from the wall, turned off.
Have the Genius Bar examine it to be sure no water reached critical areas. Also have them check if the water has started corroding internal parts -- no joke ... water in the system can start to corrode logic board areas.

The external isight won't show up on my MacBook Pro, what should I do?

I am trying to use both external iSight and build-in iSight, but the external iSight can't be found...

I don't think you'll have any luck trying to use both cameras simultaneously. This topic from 4 years ago covers the use of either the internal or external iSight camera. Incidentally, although the iSight camera is "old technology," it's not as old as the "older" hardware typically discussed in this Forum. For more info and answers to any other questions that you might have, you should check out the iSight Forum.

HT3325 I cannot link my iphone or ipad remote with my MacBook Pro, this just happened never a problem before what should I do?

my iphone and ipad keynote remote will not link with my MacBook Pro, what should I try?

cshepherd wrote:
I updated to a new MacBook Pro and transferred my iTunes along with many of my programs.
I just tried to connect my iPad and my iPhone to my new computer and was told I cannot connect any longer.
Perhaps you would post the exact message?
And when exactly did you receive this message?

Macbook pro mdu101tu/a resetting what should ı do?

ı bougth macbook pro mdu101tu/a 5 or 6 hours ago and my computer is resetting itself 2 times .
os x yosemeti versions 10.10.2
ram: 16gb
harddisk: 250gb ssd
and before reset my laptop screen is like that
what should ı do is something about ram or harddisk

Hello sabrican_ua,
After reviewing your post, it sounds like the computer is restarting on its own. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Isolate hardware or software as the cause of the issue
Follow this article for the screen having pixel issues.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I can not find icloud in my settings on my macbook pro and i have the latest software update for eerything, what should i do?

I cam not fing icloud in my system settings on my macbook pro, what should i do? i know i have the latest softawre for everything and im not sure what to do at this point...
Does anyone know what to do?

I'm on hold to apple support right now, Michael, to ask a similar question. I was able to back up itunes and mail, but no documents either in pages or in word. what are you doing? Fred

A question about Tuxedo7.1 and Oracle8.1.7 in win2000

I have install Tuxedo7.1 and Oracle8.1.7 in win2000.
when update the Oracle record by a Tux Service,
the record is not change,and the Oracle system leave a dead lock.
I had test Tuxedo7.1 with Oracle8.1.7,Tuxedo7.1 with Oracle8.1.6 and Tuxedo7.1
with Oracle9.2.0.1,all of them have the same question.
I think may be the question cause by Tuxedo7.1,SO i want know
where to get the patch of Tuxedo7.1 for win2000.
May be you have other advice,Please tell me.
Thanks.

Yes,I am using pro*c and XA.
when update the record,the sqlca.sqlcode return is 0.
Thanks.
"roopesh" <[email protected]> wrote:
>
are you using pro*c ?
what does the sqlca.sqlcode return?
does it return success before you commit the transaction ?
are you using XA also ?
Regds
Roopesh
"meteorlee" <[email protected]> wrote:
"meteorlee" <[email protected]> wrote:
I had call tpcommit in the transcation.and use the valid TMS.
I have install Tuxedo7.1 and Oracle8.1.7 in win2000.
when update the Oracle record by a Tux Service,
the record is not change,and the Oracle system leave a dead lock.
I had test Tuxedo7.1 with Oracle8.1.7,Tuxedo7.1 with Oracle8.1.6 and
Tuxedo7.1
with Oracle9.2.0.1,all of them have the same question.
I think may be the question cause by Tuxedo7.1,SO i want know
where to get the patch of Tuxedo7.1 for win2000.
May be you have other advice,Please tell me.
Thanks.

IAS 6.5 testdrive won't install on Win2000 Pro SP3

Hi Everybody,
I have a problem when trying to install iAS 6.5 testdrive on my laptop with Windows 2000 Professional SP3. I have iWS 6.0 SP4. iWS has been installed for a while and has worked fine. But I wanted to evaluate iAS because I need database connectivity. Anyway, I read the whole installation guide before installing, but when I run the installer, after agreeing to the terms of use, I receive an alert about my DNS suffix not being correct.
I don't understand it because I've followed every step explained in this forum, such as:
* My laptop's file system is NTFS
* I have installed iWS.
* I have a static IP (actually, I also use DHCP since it's a laptop and I use it at different places) during the installation.
* I have set my computer's name and DNS suffix correctly (in the My Computer|Properties|Network Identification tab).
After seeing that this was not enough, I read all the posts related to DNS settings since this is the error message I'm getting from the installer: "Please use the valid domain name for the machine, before proceeding with the installation. For the instructions to set the DNS suffix on Win 2000, refer to http://docs.iplanet.com/dosc/manual/ias.html." I've used many domains, such as my real one and fake ones like mydomain.com and test.com. None works.
I followed the instructions in that URL and I'm still getting the same error. I don't know what else to do. I think re-downloading the installer it's not an option since it's a ZIP file and if it were corrupted it wouldn't let me extract it in the first place.
I would like to know how to be able to install it, or if it is compatible with Windows2000 at all.
Thanks in advance,
Guillermo Arguelles

I had the same problem on Win2000 Pro sp3.
Install Doc says that a static ip address is needed, but I am using DHCP. I "think" I am faking a static IP address by providing a DNS & WINS server.
This is what I did:
Go to MyNetwork->Properties->LocalAreaConnection->Properties
In the General Tab, DoubleClick InternetProtocol(TCP/IP)
This brings up a screen, in that click on Advanced... Button
Set DNS server & WINS server.
This info can be retrieved by executing ipconfig /all at the cmd prompt and reboot.
Hope this helps.

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p? How do I maintain the highest quality?

No...ProRes is a high quality format. Finishing format. Many TV networks take that as a final deliverable.
BUT...DVDs aren't high definition...they are SD. You cannot make a 720p60 DVD with DVD Studio Pro. Any DVD you make will be SD...720x480. The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Before insall oracle8.1.7 in win2000 pro ,what should i do first ?

Similar Messages

Maybe you are looking for