Before installing SSD in macbook pro, should I first partition it through USB?

Hi there,
I've got the Crucial MX100 as an upgrade from my Hitachi HDD. I don't need to copy anything from the old drive, and I will install Yosemite via usb flash.
I did a bit of research and some people (not mac users necessarily) have had problems in partitioning the SSD after attaching it to the sata port. My question is: would it be recommended to first create a GUID partition through USB on the ssd before installing it in? I think I know the answer to that, and my instincts tell me to trust the Mac, but I want to be sure.
Thank you!
Early 2011 MBP, 512GB Crucial MX100

Even if you have the same name as Grant Pannell the "pioneer" in the starting period of the SSDs, you can not post your statement as the truth.
And it certainly has nothing to do with data integrity. Can you tell me if Apple has something special in their SSD controller or the standard controller ?
If you refer to old SSDs with controllers of 3 or 4 years old, and a pre_Yosemite OS, Trim may have been interesting to install, I did it on all SSds then, and I am using SSDs already for 5 years. but in the last 2 years the SSD controllers are so advanced that - when overprovisioning is enough, trim does not add anything anymore. In Yosemite it is certainly unrealistic to do because you have to disrobe an important layer of security.

Similar Messages

  • INSTALL SSD IN MACBOOK PRO LATE 2011

    I have a late 2011 MacBook Pro 15". I would like to upgrade the 5400rpm hardrive for a fast SSD. Is it easy to do yourself or should I get this done in a store?

    Sorry - this one slipped past me...
    It's easy to DIY. I put a 512GB Crucial m4 into my 15" late 2011 MacBook Pro last April. There are hundreds of videos on YouTube on how to install the drive.
    First, decide on which drive you want - there's a good info and buyer's guide here. Although much of the discussion is about drives for Windows machines, most buying advice is good for Mac's, too. You'll also want to get yourself a toolkit and an external enclosure for your old drive - I got both from OWC.
    After you have the drive installed, follow the directions here to format the SSD and clone the 'old' drive to your new SSD.
    Any questions? Yell back...
    Clinton

  • Installing SSD in MacBook Pro

    I will be receiving a new 512 gig SSD tomorrow and want to replace my existing HDD in my 17" MacBook Pro.
    Unlike most everything else I've read discussing this, I want to load everything fresh on to the new drive rather than cloning the existing drive.
    If I simply access the existing HDD, remove it, plug in the SSD and have the OS X in the CD slot, will it boot from the CD and install the OS automatically?
    I understand there may be a few steps to that, but I'm asking if the Macbook Pro will simply recognize the new blank drive, perhaps ask to format it and then load the OS from the CD?
    It seems to be that easy, but I want to make sure I'm not missing something before I crack this thing open.
    Thanks in advance for any help,
    Tim

    Just an update. The SSD drive arrived early and I just finished installing it.
    It is a thing of beauty.  Fast, quiet, awesome. No more clicking hard drive, and everything is much faster. Now on to transferring all my files.
    And it was a matter of just pulling out the old one and putting in the new one. I did have to use the Disk Utility to create a new partition, but it was easy.
    I didn't buy the SSD from these folks, but their video helped immensely:
    http://eshop.macsales.com/installvideos/macbookpro_17_unibody_early11_hd_m/
    I don't think I'll ever be able to have a laptop with a standard HDD again. 20 minutes is all it took to get spoiled for life.

  • How To Install SSD In MacBook Pro?

    Hello Apple Experts, I am new to this forum. I have An Apple MacBook Pro Retina 2013. Its very powerful but except its Flash Drive is not very fast and its making my MacBook slow. So to make it faster I want to install an Intel SSD 520 480GB to it. But I am afraid because its a very new and I don't know how to do it. So Can anyone of you help me to do it? Its Greatly Appreciated, Thanks...
    My MacBook Specs Are:-
    CPU- Intel Core i7 3840QM 2.8GHz
    RAM- 16GB DDR3 1600MHz
    GPU- NVIDIA Geforce GT 650M
    Storage- 750GB Flash Drive
    If any other info is required then ask me....
    Thanks For Any Help...........

    Your slow response of the system could be caused by many different factors. From a corrupted install of the OS to faulty hardware in the system.
    The only way to test it is to completely erase the drive, Repartition it, and reinstall the operating system, OS X, and all your programs. If after a Clean install of OS X, and selectively installing your programs one at a time, and testing after each install to find out why the system is running so slow. If right after installing the OS the system is slow to respond then it is likely a hardware problem. If it runs fine then it was a software problem.
    If you find it is a hardware problem the only thing to do is take the system to Apple for diagnosis and repair or exchange.
    If you find it is a software problem then do not install that piece of software.
    Apple990 wrote:
    If my Flash Storage is SSD then why is my MacBook so slow, Please help me it takes about 15-20sec to open the Store and other apps also takes more than normal time. Please help I have also Updated My OS X but still the problem persists.

  • Installing SSD on MacBook Pro

    So I'm planning to replace my original hard drive off my Early-2011 MacBook Pro with an SSD.
    I understand the whole process of replacing it, but I'm wondering on which hard drive to use.
    Will a Samsung 840 Series Pro work with it?
    Link: http://www.amazon.co.uk/Samsung-Series-256GB-Solid-State/dp/B009LI7CTY/ref=sr_1_ 2?ie=UTF8&qid=1390162797&sr=8-2&keywords=macbook+pro+ssd
    If so, it's a simple job of taking the old out and putting the new one in, then using the OS X install disk?

    I know I am late to the party on this subject but... I just recently replaced the hard drive on my Late 2011 17" Macbook Pro. I started researching the process I read all kinds of posts with links to other information on the TRIM utility and KAST signing and everyone talking about how much trouble they were having trying to put an SSD in their Macbook Pro. I almost took the drive back to the store but I decided to talk to one of the Apple geniuses first. I could not believe what he was telling was correct because it was so simple. I pulled out the 750 GB hard drive that came with my Macbook Pro and installed a Samsung EVO 850 128 GB SSD. I booted off the network (press "C") and it went out to Apple and downloaded the OS that came with the Mac afterwards I upgraded to Yosemite. That was all I had to do. No worries about TRIM or KAST.
    Once again I am convinced Apple makes the best products on the market. I doubt you can do this simply with a PC and Windows.

  • Can i install SSD into MacBook Pro 2012?

    Hi All,
    I don't usually deal with Mac upgrades but i've been asked if i can replace the standard Hard Disk which is currently in a Macbook Pro 2012(?) model with a SSD storage?
    My thinking is 'yes' as the SSD comes in SATA form anyway and the current Hard Disk is using SATA. So it shouldnt be a problem right?
    Just thought i would ask in here as i'm pretty sure someone else has either done this already or confirm yes or no.
    Thanks a bunch!
    Lee

    Yes.
    See my one and only user tip -> Upgrading your MacBook Pro with a Solid State Drive.
    Call back should you have any questions.
    Good luck,
    Clinton

  • Install SSD, running macbook pro with two operating system and two hardrive

    I am currently running bootcamp with Window 8 and Mountain Lion. I am about to install a 256gb SSD, replacing the optical drive. The partition on my current setup is 125 gb for window 8 and 125 gb for OSX.  Since this is the first time I am running a computer with two hardrive and two different operating systems, how should I go by installing (software) my SSD. Should I just make one hardrive run window and the other one run OSX. Is it possible to move the OSX partition to the SSD. Should I just install both window and OSX again on the SSD? What are some other options?

    It is possible, use Target Disk Mode How to use and troubleshoot FireWire target disk mode - Apple Support

  • Install SSD in macbook pro late 2011 15'

    Hello,
         I just want to make sure i have the steps right for installing my SSD. I am trying to avoid cloning because my current HDD is faulty which is why i'm replacing it. I have a time machine backed up on an external hard drive. So as far as i know i just need to
              1) Remove HDD and replace with SSD
              2) Boot the recovery drive
              3) Recover time machine
    I am just confused with step 2. I thought the recovery drive was just a partition of the HDD so it should not show up with the SSD in. Or is it seperate?

    Allow me to make things straight forward.
    Install the SSD.
    Install OS X Using Internet Recovery
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.
    Before rebooting OS X for the first time connect your Time Machine backup drive. Boot the computer and when you are asked if you want to transfer files now use the Setup Assistant to transfer your Home folder, third-party apps and support files, and system preferences from your Time Machine backup to the SSD.

  • After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
    Yet another Leo let-down.....

  • For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
    If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
    1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
    2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
    3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
    Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

  • I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?

    I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?

    i also contacted the company that sold me the battery and they offered me my money back or a new battery
    Suggest that you take them up on their offer of a new battery.  Make sure you got the right one for your model MBP. 
    2 separate MBP battery installation Articles:
    1 -
    MacBook Pro: How to remove or install the battery
    2 -
    MacBook Pro: How to remove or install memory
    =================
    Never post your email address in a public forum.  Spam bots roam public forums looking for "spam victims". 
    If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@" in the email address, use instead the actual word AT.
    Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
    Thank you
    I have requested that a HOST remove your email addy.

  • MAIL FREEZING SINCE INSTALLING YOSEMITE ON MACBOOK PRO 2011

    Problems with mail program freezing since installing Yosemite on MacBook Pro 2011

    When Mail freezes, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • A clean install on my MacBook Pro has left my icons stuck on the right side of the desktop. I want to move them but there is no 'None' option which I think would free them to move where I wish. Suggestions?

    A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful.  The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
    Julz11 in NYC

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • What the Macbook Pro should have

    Hi guys, 2 weeks ago I purchased my first Apple laptop - the Macbook Pro 13", before that (and still sometimes) I used PC. Even though the design is great, there are things that could be done to make it perfect. Here is my list, please tell me what you think about it.
    1 - A delete button one the keyboard, I noticed that the Macbook Pro doesn't have one before purchasing it, but after using if for 2 weeks noticed how important it is.
    2 - The 2 USB ports are quite inconvenient because they are next to each other, it would be more convenient if they are from both sides instead, like Macbook Air. I have devises that are a bit wider than the other ones, so when one of these is plugged in, the other USB port is unusable. Speaking of which USB 2.0 isn't good! The ThunderBolt port is great but there are no devises yet that can take any advantage of it, so in the meantime USB 3.0 would be great.
    3 - HDMI port - most of the laptops already have it, I don't see why none of the Macbooks has it. If I want to connect my Macbook Pro to my TV, I have to spend extra money on MiniDisplay to HDMI adaptor (it's not like Apple products are any cheep, so spending extra money on things that should have been there on first place is NOT good).
    4 - Numerical Keyboard - I know there is no room for it, but a button like Caps Lock could be used, when it's pressed certain buttons from the keyboard could act only as numerical keyboard and when pressed again, the keyboard could be back to normal.
    5 - The screen resolution of the 13" Macbook Pro should have been like the 13" Macbook Air.
    6 - The CD Drive is unnecessary, nobody uses it nowadays. Nobody listens to music from a CD and nobody installs any software from a CD, everyone uses the Internet for these things, the little part of people who are still using CDs, DVDs, etc. have other devises such as: DVD or Blue-ray players, HiFi systems and Desktops. The room that is taken by the Optical Disk could be used for a bigger battery.
    7 - Better cooling system - when watching a move the laptop gets so hot that I literally can't put it on my lap (lol what a paradox, a laptop that cannot be put on a lap), also I would love to be able to close the lid and leave the laptop works (it is great when downloading big files or scanning software is used), but with that cooling system I'm afraid that it would overheat.
    8 - Last but not least - The screen bezel. It's too big, Macbooks should be bezelless, it would make them much better looking.

    DS had some great points, I'll chime in as well.
    1.) I agree, it'd be handy to have. It definitely took some getting use to but once you do and modify your keyboard workflow it becomes second nature.
    2.) I ended up investing a USB extension cable, Apple makes them I believe. At least they use to, I've had mine for years. While the cable dangling off the side of the machine is a bit of an annoyance, it's a necessity if I want to double up my AirCard (USB) with a thumb drive. USB 2.0 is still the "standard" and as such it's going to be the de facto peripheral port. Apple is historically slow about adopting non-standard peripheral interfaces unless they pioneer or champion it. It wouldn't surprise me if Apple still doesn't offer USB 3.0 this time next year. Thunderbolt/Light Peak is brand new tech, and as such it's going to take a while to have peripherals that support it. There are NAS devices that have it, they were just announced this week.
    Here's a link regarding its deployment - http://www.tuaw.com/2011/04/13/intel-distributing-thunderbolt-developer-kits-thi s-quarter-more/
    3.) I agree that HDMI would be nice but with Thunderbolt supporting HDMI, I really don't see Apple adding another video out port. There's no room left on the I/O strip on the 13" MBP for it. Apple use to include adapters (when the MBP first came out) but they've since stopped doing that and gouge with adapters. Thankfully there are numerous 3rd party offerings at a fraction of the price.
    4.) I agree, I forget which "redesign" of the keyboard layout got rid of the Num Lock key. I know my 15" MBP (Santa Rosa) has it. I currently use my iPhone as my numerical keyboard, there's a great little app that pairs the phone to your computer via Bluetooth. It works great as an alternative.
    5.) Marketing 101. By introducing it via a future revision this encourages current owners to want to upgrade/switch and thus move more units and tout it as a "feature upgrade." I was pretty shocked the i5/i7 update to the MBP 13" did not introduce the 1440 resolution.
    6.) This is where you'll get disagreement. Rule #1 of proper Internet forum posting, don't use words like: everyone, everyone, most, all, nobody, no one, etc. Especially without evidence to back it up. While you don't use it, people do. I use mine daily, my co-workers use their drives daily. That's 11 people right there, which is 11 more than "nobody."
    7.) Apple has never called their computer a "laptop." They've always referred to is as a portable computer. Matter of fact, they strongly discourage the use of their portable computers on your lap due to how the heat dissipation process works through the top case. So the problem(s) you're experiencing are to be expected, you're using the machine in a method that is not recommended by the manufacturer. They even discuss that in the "Getting Started" booklet that came with your machine.

  • My USB hub driver is not installing on my macbook pro windows 7 partition ?

    hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

    yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
           - i changed the usb port .
           - i changed the hub it self .
         - i seaarched online for the driver automatically
            - i searched online for the driver manually ie. hardware id ..
             - i checked the connections,,
    anything else should i do ??

Maybe you are looking for