Before Upgrading to ARD 2.0 .....
Apple Remote Desktop 2.0
Before upgrading from remote desktop 1.2 - 2.0 enable VNC port 5900 - 5902 as well as ARD 3283 on the workstation. ARD v 2.0 requires both v 1.2 did not. If like me you did not know this you can copy the com.apple.sharing.firewall.plist (found in /Library/Preferences/ ) from a mac with these ports open and replace the com.apple.sharing.firewall.plist on the mac that does not using ARD 2.0 as the copy function does work - then reboot.
see the link below - alas I found this after the upgrade !
http://docs.info.apple.com/article.html?artnum=108047
Shouldn't this port access change have been part of the install process for the ARD 2.0 client software? I have been puzzling for days trying to figure out what I was doing wrong.
According to KB article 108047, ports 3283, 5900 and 5988 need to be open to get full access to client computers from ARD. I'm not sure what each of these ports is used for.
Now that I've opened the firewall to those ports using the Sharing preferences, I can access all the Macs on my LAN with no problem.
Similar Messages
-
I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL. visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet. Thus, I am backing up to iTunes.
This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone. I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
Since I had a backup just last week, I'd like to just go back to it. But how? Or, is there another way to get my contacts restored? And why did they disappear? And what else may be gone that I just don't know about yet?I want to restore my iPhone to the backup that I did just before upgrading to iOS6. When I try to pull up old backups, I only see one from this morning and an old one from May 2012 when I still had my iPhone 3GS. I have not been using iCloud since it was set up improperly when I first switched to the 4S, the contacts weren't being synced AT ALL. visited the genius bar, they said I need a whole other appointment to visit them and solve that, I haven't had a chance to do that yet. Thus, I am backing up to iTunes.
This morning's sync/backup resulted in me losing most of my contacts, and for the contacts that remain, 99% of the phone numbers are gone. I can recover my calendar entries from this past week, but I don't know how I can recover all of them from my May 2012 backup.
Since I had a backup just last week, I'd like to just go back to it. But how? Or, is there another way to get my contacts restored? And why did they disappear? And what else may be gone that I just don't know about yet? -
I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
I'm on a Macbook Pro and all of my software is up-to-date.
The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.
-
Bug in Inventory Audit Report before upgradation from SAP B1 2004B to 2005B
Sir,
We upgraded SAP Business One 2004B to SAP Business One 2005B on 26/05/2007. Earlier we were having SAP B1 2004 in which therer was no Inventory Audit Report function in Inventory Reports. After upgradation if we take Inventory Audit Report, the closing quantity of the stock is shown is correct but the value for negative stock quantity is wrong for period before upgradation i.e.upto 26/05/2007. The difference is exactly double of the stock value of that item. The closing quantity and value is OK if we run the report for the period after upgradation i.e. from 27/05/2007 to till date.
For e.g.
If we make A.P.Credit Memo for an item qty.20 value INR 20,000/- based on A.P.Invoice and take Inventory Audit Report, the qty.is posted as -20 but the value is posted as INR 20,000/- but actually it should be INR -20,000/-. That is the value is taken twice of the original value.
Reagrds,
Vishal TakteHi Vishal,
Please contact SAP Support for your problem; I think they should be able to help you to fix the problem.
Sorry for any inconvenience,
Frank
PS: Please note that such "application-related" questions fit best into the "SAP Business One" Forum...
Message was edited by:
Frank Moebius -
MY phone worked fine with the docking station before upgrading to ios7 now it's not playing music but still charging the phone, anyone have any ideas to what I could do to fix this please?
Restore your iPhone the updates may have corrupted your iOS installation
-
I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files. My photo files are not where they were before upgrade.
Have you checked the sorting settings to make sure they are as you expect?
OT -
upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?
So now I went back to the screen that orginally asked me for my Apple ID and passort, and instead of entering my Apple ID i entered the email address associated with it and the new password. It now tells me "You can't sign in because your account was disabled for security reasons. To enable your account, reset your passwort at iforgot.apple.com"
I have now changed my password twice and it still doesn't work.
Until I get this resolved my tablet is useless. -
Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.
I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie -
How do I make a back up on Time Machine before upgrading to Mountain Lion?
A detailed process would be greatly appreciated. I've heard I should use time machine before upgrading to Mountain Lion for reasons I cannot remember.
Thanks!Connect an external drive to your Mac. Open Disk Utility, it is in the Utilities folder in the Applications folder, and see if the external is formated Mac Extended (Journaled) and if it is not you can either use the Partition tab to Re-partition it as one partition and format it Mac Extended (Journaled) or you can use the Erase tab to Erase the drive and format it the Mac format. Name it anything you like.
Once that is done close Disk Utility and open System Preferences and go to the Time Machine Applet. Once that is open, If OS X doesn't ask you if you want to use that external as a TM backup disk, select "SelectBackup Disk" and select that external as a place to store backups. Then move the slider from Off to On and then TM will start the process of making a backup of your system. Once it is finished I suggest you turn it back off. -
I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?
The iPhoto library should be in your user folder/Pictures unless it was moved.
-
I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!
You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
I want to backup my phone before upgrading to ios5 but I get an error message: itunes could not back up the iphone because a session could not be started with the iphone. I want to go to ios5, but I do not want to lose everything. I've gone to my device under preferences and I have no backup currently.
I have a Verizon Iphone 4 and a PC.
Please help me..Hi Judy,
Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
VBR,
ray -
I'm running on Mac OS X 10.5.8. Do I need to buy snow leopard first before upgrading to Mountain Lion?
Make sure your machine meets the minimum system requirements:
http://www.apple.com/osx/specs/
Although it says 2 GB RAM is the minimum, it's generally recommended to have at least 4 GB unless you only use your machine for "light" use (no movie editing/burning, etc). -
Is there a way in which i can check if my Iphone 4 is factory unlocked before upgrading
Is there a way in which i can check if my Iphone 4 is factory unlocked before upgrading
i have bought it outside of usa and its unlocked till now....will it lock if i upgrade
i just wana get official word from apple that my iphone is factory unlocked how do i do that
PLESE APPLE HELP USsyed waqar wrote:
if i send all the information to apple cant apple simly tell me that the phone is unlocked
No. I've given you your answer. Buy from an un-official source, and you take your chances. And yes, if your phone was hacked to unlock it(common from un-official sources), it will be locked back to the carrier it was originally locked to if you update software or restore the phone. -
The RFX before upgrade does not allow me to add items from catalog
hello gurus
I have a problem with the RFX, we did an upgrade to SRM7.0 from SRM5.0.
The RFX that existed before upgrade in the server does not allow me to add new items from catalog.
each RFx I created after the upgrade works fine.
My client needs to work with the RFx still open, add items and make bids.
I have reviewed the upgrade guide and found nothing regarding an update of purchasing documents.
I have
SRM 7.0 SPS03 EHP1
MDM 7.1 SP06
MDM catalog 3.0SP10in SRM 5.0 the system was MDM catalog. Actually, after the upgrade , i have SRM7.01 with MDM catalog.
i donn´t know if it is about version, SP or compatability issue, but i believe the upgrade not affect the purchaser documents.
Those look as locked to modify. on tap Position, the buttom ADD LINE, only i can see Position, not anymore option like MDM catalog, free text.
it is a big problem, because the client has documents opened. i need to resolve this issue. Actually i am working in a sandbox system, but i afraid to have the same problem in PRD system after upgrade.
regards
Maybe you are looking for
-
i have version 4.3.3 and am updating my iphone software. I am updating it on a computer that is not mine, as i only have an iPad. Can I do this without loosing my music, apps, photos, etc?
-
I am new to Sap R/3. I want to know each and every steps like what will happen after the purchasing order has been created and how the vendor responds to the PO and so on
-
RAID / Storage Rebuild... requesting clarifications for all ;)
Hello All, I'm replacing the 2 Seagate HDDs out of my home video editing system (CS5) that was previously configured as below, and think its a good time to get clarification on some items I never really resolved after many hours of research, to inclu
-
DataOwnershipfield disregarded in dtw oSalesOpportunities
The DataOwnershipfield (owner) field seems to be disregarded when importing or updating sales opportunities with dtw SalesOpportunities.csv RecordKey;SequentialNo;CardCode;DataOwnershipfield;startdate RecordKey;SequentialNo;CardCode;DataOwnershipfiel
-
How to deactivate Photoshop CS4 as the default browser for image
I wanted to deactivate Photoshop CS4 as the default browser for image. Now everytime when i want to open BMP(bitmap) file it always use photoshop CS4 to open the file. It takes a longer time to load the bitmap picture when using photoshop CS4 to open