Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?
Before when I scanned a photo, it would automatically save and ask to scan another photo. Now, the photo is not saving and it doesn't ask to scan again. Help?
What Scanner and scanware are you using....?
Check out > Mac Basics: Using a scanner
I only use Image Capture and it always sends my photos to wherever I tell it to.
Similar Messages
-
When we start the internet or navigate to a new page, a new tab opens with the following alert: "The URL is not valid and cannot be loaded." We "x" out of it, but a new tab, with the same alert appears. The problem occurs again when we try to navigate to another web page. A real nuisance. We've scanned the computer but found nothing but Adware cookies.
== This happened ==
Every time Firefox opened
== 5/20/10Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
After completing my upgrade to Adobe Reader 11.0.10. when I attempt to save an online PDF to my local drive I receive a blank window where I would expect to see file directory structure to save to.
No local directories are displayed for "Saving To", it is all blank. When I try to Close (by clicking X) the "File Save As" box a message pops up on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I then need to go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message.
This was not happening in previous versions of Reader.
Tolls/File/File Save As always worked properly.
I have installed IE 11 (11.0.9600.17690)Please don't post the same question multiple times!
-
I was downloading photos and accidentally unplugged my phone. I have never backed the phone up now it is prompting me to restore without any opportunity to back up. I have tried shutting down the phone and the computer- but same old message....prompts to restore....any ideas....I don't want to lose my data...
Why would you not be syncing to your computer regularly?
If there is no backup, then you will likely lose everything.
The iphone is designed to be synced regularly. -
After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
just bought the iphone 5 and before syncing to my mac i took some photos then finally decided to sync it but it deleted ALL of the photos and videos and replaced them with the old pics i had on my iphone4.. i need those pics please help
Nope.
Did you fail to import them before restoring from backup? If so, then they are gone.
You should import all photos taken with the iphone to your comuter regularly as you would with any digital camera, most especially before any update or restore. -
In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?
Please don't post the same question multiple times!
-
Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording. -
In iphoto, when I click on Print, the preview image it shows me is an enlarged section of my photo. (In iphoto I hadI cropped the photo and checked "with no restraints." )
Once the photo goes to Print, I can't fix it back to the way it is in iphoto.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks
Does your server have a limit?
-
I made a beautiful invitation for my sons graduation in pages it has 1 photo on the front and 5 photos on the back. When I try to export it to my work pc the text is not supported and it looks terrible. Help!
How did you transfer it to the PC?
Not good to export as a Word .doc/x, better to:
Menu > Export > PDF
Peter -
My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached. Now the email does not come up. Why?
It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
If that doesn't help, you may have better luck if you ask in the Pages forum:
Pages
When you repost, be sure to include full details about your versions so that people know what it is you're working with.
Regards. -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.
Maybe you are looking for
-
How to know , when serial number in sales order is changed ?
Hi All, I am changing Sales order line item serial number. So the equipment number and Serial number both are changed for that particular line item. But I am unable to know, what was the last Equipment number, and Last serial number for that material
-
Re-installing Snow Leopard - early 2011 Macbook Pro
I recently sold my early 2011 15" MBP, and before sending it away wanted to clean off the harddrive. I followed the instructions for erasing it, but it has now failed 5 times to reinstall Snow Leopard from the disc. It gets about 3/4 of the way throu
-
Adobe/MS Access/Lotus Notes Integration
Not sure if I'm in the right place, please feel free to let me know if not. Have searched in Access and Lotus Notes forums but no answers yet. I am using MS Access to automatically send email from Lotus Notes and attach a PDF file that is located on
-
Youtube or similar Video sites on N96
Hi, How do i view Youtube videos with N96, i tried accessing youtube as a webpage, and tried to access the videos, but it openes the whole page, and video doesnt open. i tried accessing with video center and doesnt work. is there another way to acces
-
Illustrator CS5 installation problem
I am trying to install CS 5 upgrade. I could install Indesign and Photoshop without any problem, but I could not install Illustrator. The error massage that I am getting is as follows: WARNING: MinVersion: 0.0.0.0 WARNING: This dependency is not