BEFW11S4 Can't get past Setup

Hi.....Inherited a BEFW11S4 v3.2. After some fiddling around, have managed to access the Setup screens. Reset to defaults - both on the router, and using the option in Setup. Setup accepted my network name, and when I submitted a new password I got an acceptance message - even though the number of asterisks denoting the password reverted to what I take to be a default after the screen reloads.
So, my computer is obviously accessing the router, and I can see that the router is broadcasting a signal - and the network is identified by the new name I've given it when I scan for wireless networks - but I cannot access the internet. I know that my modem is working, because I have no trouble getting online with another Linksys router. 
I believe I've updated to the latest firmware - 1.45v10 - although the setup screen still displays only 1.45, 2003. 
Am I missing something fundamental here? 
Thanks

To upgrade the firmware you may use the TFTP Utility
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Follow the link here as your ISP is Cable...
Once you are done you can change the SSID/Network Name under the Wireless tab and change the channel to 11 or 1 and click Save Settings...
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • Can't get past  "Setup Profile" for registration

    I'm trying to register for My Verizon, but I can't get past the "Setup Profile" page in order to register. The "Continue" button on the bottom right will not allow me to click it. What's up? 

    Have you tried refreshing the page?  Using a different browser? Clearing cache and cookies on your browser?
    Is you browser up-to-date?  Running any add-ons like an ad blocker that might accidentally interfere?  Try it with a stock, updated version of Firefox or IE.  If that doesn't work, you might need to wait a few days, and if that doesn't help, call in and ask for some troubleshooting.

  • Can't get past setup assistant after installing leopard...

    i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and at the end it says click on done and then you can use the computer. unfortunately it goes right back into the setup assistant like i had never gone there before. it is in some kind of loop. would it be wise to reinstall leopard? if so, does it know that it was installed already and rewrite over the first install? or is there something else i may try. i tried resetting the PRAM and some other things recommended but nothing seems to work. any help will be appreciated.
    thanks in advance...

    mr_magicman,
    I can imagine how frustrating this must be for you. It sounds like you went for the (default) Upgrade option.
    Okay, how about trying this:
    1. With the *OS X 10.5 Install Disk 1* still in the bay, Restart your computer. Without access to menus, you'll have to use the power switch to turn it off. +[Alternatively, if you do have access to menus, select the Restart command (in the Apple menu) — always the preferred method.]+
    2. If you're using the power switch method, here, wait about 10 - 15 seconds then depress the power switch again for about 5 full seconds (or until you hear the computer come back to life). +[Alternatively, if you had selected the Restart command in Step 1, the computer will start up again on its own.]+ *Either way, as the computer starts up, press and keep pressing, the Mouse until the disk ejects.* By the way, if you're using a Mighty Mouse with a left and right option, press down on the left side only. Hopefully this will get you out of the loop caused by your Install DVD remaining in the drive.
    Finally, to be fair to you, I must tell you that there's a more suitable Forum for your particular kind of problem, viz., *Installation and Setup* (http://discussions.apple.com/forum.jspa?forumID=1219) I recommend you check out the questions/answers in that Forum in case your question has already been asked and answered.
    PS. If you do re-post your question in that Forum, don't forget to mention whether or not you internal hard disk has been backed up.
    GOOD LUCK!
    Bill

  • Can't get past setup assistant

    Imac running OSX 10.5 froze while intalling updates. Turned off, when restarted it took me to the setup assistant and won't let me past it now. Whenever I log in, just goes back to setup. From that screen, can't do anything at all, whether restart, shutdown, system preferences, etc.
    Mac shows correct user name and accepts password, but other than that.....nothing!

    Will anything here help?
    _http://docs.info.apple.com/article.html?artnum=306998_
    Joe

  • All account settings lost - can't get past Setup Assistant

    Dear all -
    I just rebooted my computer (because an iDisk transfer froze Finder again...) and now all my user data appears to be gone. I can still login, but after that I get the Mac OS X Setup Assistant... After I re-enter all that crap, the login screen pops up again, and I can start all over again, and again, and again...
    Something is clearly wrong here.
    I haven't set up any other accounts, so I think I am hosed.
    The computer is only three months old, so I am covered by warranty, but it is still annoying.
    Does anyone out here know if there is a way out of this mode w/o a full re-install?
    Regards,
    Erwin

    "Applebob for president"
    Just tried the applebob solution, but was worried with no joy after 100 revs of the progress wheel I get the jet engine fan of **** that many of us enjoyed when we had our early leopard upgrades. After a long while the fans stop and the HD starts to run it's boot up chugging and I get the safe startup dialogue.
    I could not understand what he means by 'hit back' so logging in gets me the same setup assistant scenario, quitting that goes back to the login screen and i select the restart option which drops me into the blue screen where i get a software update feature running as Applebob mentions
    To confirm my own problem for those searching to cure a similar incident. I was installing last nights apple quicktime upgrade which went fine on a g4 powermac and al-book I initially cancelled the upgrade on the g5 at the login phase to go back to review the reasons for the quicktime upgrade then went ahead to upgrade. Upon typing my login details was given an immediate restart option.. although i doubted the wisdom of doing so i did it and when it rebooted i had the perpetual setup assistant syndrome as others mention. Clearly the applebob solution fixed the botched quicktime update.

  • Cannot get past setup. WebOS Dr not working

    Hello everyone.
    I am ready to get my money back on this thing so this is my last attempt to get it working.
    About me: 30 years of computer knowledge so I know how to follow directions.
    Tried 4 of the 5T's several times, but cannot get WebOS doctor to run
    Cannot get past setup on the touchpad so I don't know my webOS version
    Have read every troubleshooting guide I can find
    No WebOS account because I cannot get that far.
    Been working on this for 3 days
    My setup:
    Windows 7 x64 sp1
    Java 1.7
    4GB ram
    500GB HDD
    Found a link to WebOS Dr without an account form tis forum, but it would not  run. Got error MSVCR100.dll missing. Got the file and put it in systemWOWx64. File was alrady in systemx86. Also put in folder with WebOs Dr app.
    No error, but no joy either. Then read another post that sent me to
    http://www.webos-internals.org/wiki/Webos_Doctor_Versions#Wifi_Only
    Donloaded latest version 3.0.5 WIFI omly. Don't know my actual WebOs version because I can't get past setup.
    What happens on setup:
    Selcet language = ok
    select network = ok
    enter network key = ok
    load User agreement = never happens becaue after about 10 minutes I get "server Error" that takes me back to the begining. I have done this process about 30+ times.
    Also, must note the toughpad takes 5-6 minutes just to come on. The longest I have ever waited for anything to boot up.
    Update: Contacted seller, WebOS ver. 3.0, 32GB Touchpad
    Post relates to: HP TouchPad (WiFi)

    kattwoman42 wrote:
    My setup:
    Windows 7 x64 sp1
    Java 1.7
    4GB ram
    500GB HDD
    I think this might be your problem. Java 7 is only a developer preview right now and not ready for mass consumption yet (info about that is here: http://www.java.com/en/download/faq/java7.xml) Any chance you can try using the latest version of Java 1.6 and run webOS Doctor again?
    Also, the webOS Doctor file should be a .jar and not a .rar. Some browsers have been known to mix up the extension so try heading to http://www.webos-internals.org/wiki/WebOS_Doctor_Versions, finding the version for your product, and right-clicking + selecting "Save As..."

  • I already have a valid payment method for my iTunes account, but can't get past the Family Sharing setup prompt telling me to add a payment method . What to do?

    I already have a valid payment method for my iTunes account, but can't get past the Family Sharing setup prompt telling me to add a payment method . What to do?

    I had the same problem and found a bunch of others did, too.  Unfortunately all the posts had no responses!  Anyway, I previously had my payment method linked to my paypal.  I tried changing it to my credit card and it worked.  Don't know if there's a bug with using paypal but that seemed to be the culprit for me.  Good luck!

  • CAN'T GET PAST STEP 8 SETUP CD

    I have a WRT54G router. After a couple of months I started having problems accessing the internet. I started all over again, installing the router rom scratch. However, I can't get past step 8 of the installation process. The setup program prompts me for a password. I enter "admin" and it starts checking for computer settings. After it reaches 100%, it prompts for the password again and then the process start all over. It never stops asking for the password.
    I try to exit, but I get a message saying "installation incomplete". HELP PLEASE!!!!!!!!!!!!!!! 

    You had a password setup on this router when you initially setup this router. You need to provide that password. If you don’t remember the password then you may need to hard reset the router by pressing the reset button at the back for 1min and then try again. This time it should accept the admin password.

  • I can not get past the setup screen on my reader. What am I doing wrong?

    I can not get past the setup screen on my reader.  What can I do?

    I have no idea what you mean; can you post a screenshot?

  • I have setup my mail but now it always opens to welcome to Mail page and I can't get past it.

    I have set Mail and it worked fine before I upgraded to OS 5.  Now it always opens to Welcome to Mail page and I can't get past it. I tried just setting up the account again but it gives me the message that it already exists.  I can see 50 emails in the Mail icon.  How do I get past Welcome?

    Try a reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • I want to use this phone w/o a verizon account or number, but I can't get past the set-up screen. Can I use this phone to surf there web only and get past setup

    I just want to use the phone as a web browser using wireless, I don't have verizon, I can't get past the set-up screen. Can I use the phone without a verizon account?

    I took it to Verizon and a counter person got it to work. she said one has to be persistent and eventually the screen goes away that was demanding the phone number I didn't have, it works now I'm happy

  • HT202649 Hello, I just bought a used iPhone 4S but can't get past the ID to continue set up. I went to iforgot as requested to reset my password to my existing account. Still can't get past the ID.

    Hello,
    I am having setup issues with a used 4S iphone. I can't get past the Apple ID step.
    First it said it was an existing ID and I should go to iforgot and reset my password.
    I did, but still keep getting the error message.
    Then I entered the serial number online support and it said the ID was another account. Would that be the seller?
    Do I need to get them to unregister under their name before I can proceed? Or...
    Please help. I start  new job on Monday that required me to have a smartphone. I need it up and running.
    Thank you
    R

    Yes, you have encountered Activation Lock (Find My iPhone Activation Lock - Apple Support). The only way that phone will ever be usable is if the owner the phone is locked to releases it (see: Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support). If you are lucky the phone is locked to the seller, so you can ask them to unlock it. If the seller is merely a middleman and the previous owner is not the seller it gets much more complicated. It's even possible that you bought a stolen phone, in which case you will never be able to use it and you should return it for a refund.

  • Can't get past user agreement

    I can't get past the user agreement in setting up Elements 11on a mac.The window keeps popping open. Can anyone help me?

    right click your setup file and click "run as administrator".

  • Dreamweaver Mobile Applications: Can't get past "Cloning seed app for Android" window

    I'm trying to do a basic Android app using Dreamweaver. I went to Site-->Mobile Applications-->Build and Emulate-->Android. When I do this a window pops up that says Cloning seed app for Android. Unfortunately, I can't get past this. The window continues to act like it is loading, but then it never loads anything. You're supposed to configure the application framework which I did. It's funny because there is an "Easy Install" button. Of course, it doesn't work which means you have to manually try to download and set everything up which is a nightmare that lasts for days. Easy Install button? It's more like a screw you button. All of the tutorials are predicated on the easy install button actually working. Anyways, I downloaded the Java Development Kit (JDK) and the Android software development kit (SDK). Then I got my AVD (Android virtual device) up and running. Then I  set up a site and made sure the file was saved as index.html. I also made sure I put in information in application settings. I tried calling Adobe tech support and doing extensive Google research. Adobe told me it wasn't their problem that the "Easy Install" button isn't working. Plus, troubleshooting information on Google for Dreamweaver mobile app development is scarce. It would be great to start developing instead of hassling with the setup. I'm a week into it and I still  can't get it to work. I'm using CS5.5 Design Premium.
    Lastly, I've done all the updates for dreamweaver that I can do. The only thing I can think of is maybe to try putting the SDK and JDK in the same folder, if that is even possible? Also, I'm using JDK6. Maybe the Android SDK will only run with JDK7? Either way I'm stumped. Any suggestions or help will be appreciated. Thanks.

    I've got the same issue.... in visual studio, you set the properties of the object to something like, content and it builds it with the binary.. but flash builder, i'm stumped on how to get the release build wizard to recoginize the additions i've selected in the project properties -> build packaging -> package contents section... :/

  • Can't get past the welcome screen

    I just purchased this and have been trying to set it up. I have been on the welcome screen for 2 hours now.  I can't get past the screen where you check the country.  That's it.  It's selected but nothing works and the VO hasn't indicated anything other then how to navigate through the table.  Once you have highlighted the country you want, why can't I select it and move on??

    remember that you can always call Apple to help you setup your MBP:
    http://www.apple.com/contact/

Maybe you are looking for