BEFW11s4 Computer permission problems (I think)

I have two desktops and a wireless laptop connected through my BEFW11s4 router. Everything worked perfectly until I unhitched everything to move the computers around my office. After I reconnected everything I ended up with the following: All three computers can see the internet, the two desktops can use the printer which is attached to one of the desktops. The wireless laptop can't print anymore and none of the computers can access each other. I have tried re-running the network set up wizard but that hasn't worked. HELP !!!

I have found the windows firewalls and turned them off. The second computer can now see everything on the first computer. The first computer can see that the second computer is on the network but I cannot access anything. (see message below) I have re-set the hard drive to "sharing" mode (click my computer, right click on C drive, highlight sharing and security etc...) but it still doesn't work. I am wondering if the McAfee program is still blocking access. I opened up McAfee and had it look for computers on the network. It found the first computer and shows it connected to the network via the router. I clicked to allow access to/from the network, but I still have the error message problem. Any ideas? Thanks!
\\secondcomputer is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The network path was not found.

Similar Messages

Permission problem after latest update, computer can't shut shown

after the latest update on Itunes and quicktime, my computer can't be shut down properly. I have to press the power button for long and force it to be shut down.
After checking the permission, I find that there are looooots of permission problems. I don't know how to do with them:
Started verify/repair permissions on disk disk0s2 Macintosh HD
Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r-----
Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Permissions differ on "System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x
Finished verify/repair permissions on disk disk0s2 Macintosh HD

Ok...
*"worst of all, my macbook is not working properly. Ever since the latest update of itunes 8.2 and Quicktime, I can never shut it down properly. I have to press the power button until it is forced to be shut down."*
Try resetting the SMC. http://support.apple.com/kb/HT1411
If you still can't shut down from the Apple Menu, try resetting the PRAM/NRAM, instructions here.
http://support.apple.com/kb/HT1379
Are you running anti virus software???

Permission Problems after Migration

I have been overcoming numerous problems following a FireWire migration of files from a PowerBook G4 running OS 10.4.11 to a MacBook Pro running OS 10.6.2. Nothing seemed to make the transfer seamlessly, but I have managed, after great effort and help from this community, to get the following migrated "correctly" (version changes in parentheses):
Address Book groups and cards (4.0.6 -> 5.0.1)
iCal calendars (2.0.5 -> 4.0.1)
Safari bookmarks (4.0.4 -> 4.0.3!)
Mail local folders (2.1.3 -> 4.2)
iTunes music (9.0.3 -> 9.0.3)
iPhoto pix (5.0.4 -> 8.1.1) - but "rolls" to "events" still needs work
The current problem is that a few of my files (so far, all password-protected Excel files) are Read-Only on my new machine. Not knowing that it might be an issue, I selected a different User Name on the new machine from the one used on the old machine. The machines are connected over the same network, and I have logged onto the old PB from the MBP successfully. Via Get Info, I have changed the permissions of these files from Read Only to Read and Write for Everyone, but I am still unable to save changes to these files. The Owner of these problem files is listed as the old computer's User Name. I doubt this is relevant, but I am also in the middle of changing from Office X to Office for Mac 2008. Using a tip from a MacWorld article of 3/28/08, I added the old User Name as an alias for the new User Name. This did not solve the problem.
I would truly appreciate any tips that would solve this problem quickly. I am extremely disappointed that the migration has proven to be such a painstaking exercise, one which is not yet complete.
Bob

Baltwo, your suggestion solved the problem easily. I gave in and restored the new machine to factory conditions and then migrated over FireWire seamlessly, with everything completely organized as expected. There was never any option to enter a new username; the old username was part of the migration. I no longer have any file permission issues.
I think the problem arose because I did not have a 9 pin FireWire cable when I started and attempted to migrate over the network - an option that was available. That did not work (due to permission problems!), but somehow I must have created a username on the new machine that ended up causing all of the problems.
Thanks again for pointing to the exact solution to my problem.

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Looking for a way to solve permission problem in windows 7

one of the biggest problems i have with this windows that even that i'm an administrator and the owner of the computer i always have permission problems folders i get a no access errors with files and folders even thoughe i should have full permisions i belive system restore doesn't work for me because permissions problem and i don't know what to do anymore i'v used uac i'v disable uac i downloaded a registry file to take owernship on files and folders and still problems so what can i do to solve all this problems?
and to be honest i really don't like the way windows 7 behave with permisions this is my computer and i am an administrator why do i have to fight to access folders like System Volume Information,Recovery,Documents and Settings why do i get the lock icon when i take owenership and i'm on the users list but when i add users everyting is fine?
10x in advance.:)

Hello,
This is by design. You cannot access the folder or files are protected by operation system even if your current user account is Administrator.
System Volume Information is a hidden and protected system folder that the System Restore tools uses to store it information and restore points.
In Recovery folder, there are two files: Winre.wim and boot.sdi. With these two files, you are able to boot the system to Windows Recovery Environment (WinRE) and do a repair without inserting a Windows 7 installation disc.
If you want to access the protected folders like “System Volume Information”, use the following method, but I do not recommend you do this. It may cause some potential problems:
1. Right click the System Volume Information folder and choose Properties.
2. In Security tab, click Edit and then click Add. Type in “everyone”(without quote) and click Ok.
3. Then “Everyone“ will be listed under ” Group or user names”, click Everyone, and check “allow” full control option.
As BurrWalnut said, the “Documents and Settings”, it is a junction. A junction point is also a protected operating system folder that points to another folder. The junction point is an important part of application compatibility and does not contain any data or other files. In Windows Vista and Windows 7, the “Documents and Settings” folder has been replaced with “Users” folder. All of your user profiles are saved in C:\Users\User name folder.
Thomas Lin

Facing permission problem for accessing database

{color:#0000ff}Hello All,
I have just started in this forum. I am very new to j2me and facing problem and I need your help.
I had successfully signed the application and it was working properly on device. Next I added login module in my application where I am accessing a PHP from server which is having MySQL DB connection for usercheck. When I try with unsigned jar it works properly and when I try using signed jar it is showing me wrong username/password. I think it is midlet permission problem.
It would be very nice if someone can tell me what might be the possibilities that it is going wrong.
Thank you.
Regards,
-Anuradha{color}.

Signing MIDlet has nothing to do with how data is send over the network. So please be sure that your signed MIDlet is not corrupting your data.
If you are receiving correct username / password at server side, then its server's responsibility to validate it Your MIDlet has posted the parameters right way.
I would suggest you to check following things
1) Check if server is validating the username / password.
2) What response does server sends you back after validating username / password. Check on both ends.
3) Check how your midlet processing the response from the server.
4) Do you get any exceptions?
but I am doing database connection through php which is on server, I hope it is not wrong way of doing it.Doesn't matter what technology is used at server side to connect to the database.

Permission Problems Since Clean Install of Mt. Lion

I did a clean install of Mountain Lion last month. I reinstalled all my apps from freshly downloaded installers, rather than copy anything to my pristine system folder. I copied my music, photos, and other documents from my Time Machine drive. Now, I have constant permission problems on all these folders. I don't have permission to do anything to any of these folders or subfolders. I can't rip a CD to iTunes, I can't sync my iPhone. I can't download anything. I can change the permission on each folder individually, but there must be thousands of them. There must be an easier way. Changing permissions for a parent folder doesn't change the subfolders. Disk Utility reports no problems when I repair disk permissions. Thanks in advance for any help.
Also, the iPhoto app disappeared after the clean install. I don't know how to re-install it. Do I have to wipe my drive clean again and install Leopard from my original DVD that came with my iMac? That would be a huge job to get back to Mountain Lion. I'll post this question in another thread and link it here.

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Contribute 6.5 "Access denied. The file may not exist, or there could be a permission problem."

Help.
After being forced to upgrade to 6.5 since my version would not work after upgrading to Mavericks OS I get the "Access denied. The file may not exist, or there could be a permission problem." error on one of the sites I manage when trying to publish an edit to a page.
I have looked at prior fixes but none seen to apply to version 6.5
I have uninstalled, reinstalled and now have a fresh install on a new computer and still the issue persists.
I'll appreciate any help to resolve this issue.
Thanks,
Kort

I encountered the same error message, then remembered I had changed the name of my hard drive. I changed the HD name back and was able to access. Now trying to figure out how I can change the path to my local files so that I can re-change my HD name.

Recurring disk permission problems.

I am having recurring disk permission problems on my MacBook Air (Rev. A 1.6GHz/OS X 10.6.6).I am using Onyx to verify and repair disk permissions, but after about a week the computer seems to slow down and respond strangely. I run Onyx again, and it repairs many disk permissions, but the same thing happens again after about a week. Below is the log from a repair disk permissions that I ran through Onyx earlier today.
What can I do to fix this problem? Any help would be greatly appreciated!
Started verify/repair permissions on disk0s2 Macintosh HD
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar"
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar"
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist"
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries"
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r--
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl"
Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x
Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar "
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar"
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist"
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl"
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r--
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl"
Finished verify/repair permissions on disk0s2 Macintosh HD
Message was edited by: Mr. Mojo Rising

http://discussions.apple.com/thread.jspa?messageID=12699721&#12699721

Normal CGI-Executables permission problem? and Executing Binary CGIs?

Running 10.4.7. And we are having the no permission problem when trying to run CGI scripts from within CGI-Executables. I have looked at the httpd.conf file and the line that was supposed to be there is. I also have an alias under the default webserver pointing to it. Any help?
Also, until then, I made a directory under the main website executable and can run perl cgi files. But I get the following error when running the binary file :
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Thanks,
Corey

Forget the CGI-Executables, the Alias was fritzing it up, and deleted the alias and is working. But I am still having the problem of the binary CGI files. The only difference I have on the web server is entropy's PHP5 is installed, but wouldn't think that would be an issue.
Corey

Cannot restore Mail from time Machine - permission problems

I am running Lion 10.7.2 and mail 5.1 (all software updates applied)
I know there is a fair bit referencing similar problems but I cannot find my solution.
I inadvertantly deleted a mail account and simply wish to restore the account from my time machine backups.
Time machine has been reliable in the past and my put my faith in it. However this problem now introduces a fair bit of mistrust which should never happen with a backup system.
I navigate to ~/library/Mail/V2 and then open time machine and select a known good backup (I hope).
I highlight the time machine account folder I want to restore and select "restore".
Time machine starts the restore normally but very quickly comes up with this mesage -
"The operation can’t be completed because you don’t have permission to access “.mboxCache.plist”.
(I am logged on as admin)
I have repaired permission on my HD to no avail.
I assume that the message refers to the time machine file but any attempt at changing permisions on the time machine backups fails as "not permitted" (I would not be surprised at this anyway as I dont know how the time machine file system works).
I then copied my complete mail folder to another disk and deleted the original and tried to restore the complete mail folder from the time machine backup.
A similar permissions error message occurs but on a different file.
I am getting nowhere and am rapidly losing faith in time machine - I totally rely on it.
Can anyone help please.

I deleted the account using mail preferences, so following your advise:
I restored the pref file from the good known backup date.
I also used disk utility to repair the time machine backup volume which showed no problems.
First of all, restoring from time machine according to FAQ 15, the actual messages in the deleted account were indeed restored to the new mailbox that time machine created and could be viewed - that is fine and solves the problem of lost mail.
Almost solved - but what I was trying to do was :
I had two accounts which show under inbox and when you "get mail" the little whirling indicator shows activity which my wife (and I) liked. After I deleted the second (now unused account) there is no more indicator when "getting mail" and it is not obvious that anything is actually happening. Any mail received will show up under mail activity but if there is none we all just sit there with no feedback until it "beeps".
There was also the other issue of maybe wanting to get back all mail for the deleted account (which you solved).
I can of course recreate the account as a new one but I thought time machine would be able to restore the mail system back to where it was (as it should) - it seems it may not be able to which is not nice as in "what else will fail one day that I dont know about". To restore "as was" is why I tried to restore just the "missing" folder in ~/library/mail/v2 but keep running into these permission problems.
Time machine was the best backup system I have seen in over 30 years in computing but if it now "doesnt" under all circumstances it becomes useless and we will have to go back to manual or other backup systems. Surely Apple will fix it - a backup and restore system has to completely reliable or not at all.
I thank you for your help and, as I say, there is no real urgency as mail items can actually be recovered - it would be nice to be able to restore "as it was" however.

Back End Permission Problem

Hi everyone,
We encounter permission problems with our Visual Composer Applications.
We have created three applications using the visual composer and accessing a BI-system as backend
But the developer has super_user permissions and we dont want our endusers to have them.
Therefor we created new roles only with the permission to see that specific report.
But now, the users are not allwoed to see the data.
The error says, that I should ckeck the permissions.
Well, I did. The user can execute the queries I used directly with BEx - no problem, but within the VC-application not.
So I assume the problem are permissions in the portal.
If I give the user super_user permissions it works, but thats not what I want.
I want the user having minimal permissions in the portal.
Is there somebody who can help me?
Sincerely
Mark

Hi
Your problem looks like portal authorization issue. There is separate role for 'End Users' to execute & view the portal iview. Just check with your EP administrator, he will solve the problem. There will be role like -
*VC_Role.
*eu_Role.
Regards
Sandeep

[MX 2004} Can't upload! The file may not exist, or there could be a permission problem

I'm running MX 2004 on Windows XP. All's been well for the
last few months, doing site maintenance at this part-time job. I
get tangled up a bit in checking files in and out, coming from
GoLive, and since there's no one else with FTP access, yesterday I
told it to check the entire site in. I didn't have any changes I
didn't want to commit, and I figured that would keep things a
little neater.
As of today, I can post revisions to existing pages, or
resize image files, but when I create a new page, or try to place a
new image file on an existing page, I can't upload it.
So, to be clear: I have two pages already up on the site,
index.html and apple.html, with a link between them. If I create
new page banana.html and make a link to it from index, index.html
will upload that revised link, but banana.html is refused with the
message
FTP error: The file may not exist, or there could be a
permission problem
I know the file doesn't exist (remotely); I just made it.
I've gone to Prefs and disable Check In / Check Out, which didn't
do me any good. What next?

Can you open the FTP log, select one of these new files and
upload it- then
cut and paste relevant part of the ftp log?
Also- does this site have a "host directory", a subfolder
that your public
files need to go into? If yes- is this folder listed in the
host directory
line of the remote server info?
And odd past thing i've seen-
Had hosting that used public_html as the public folder name.
They also had a symbolic link named www that pointed to
public_html
Could upload/download existing files with www in "host
directory" line of
dw; but could not upload new files or work with files in
subfolders.
changing to public_html instead of the www symlink fixed this
for me.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
Mylenium

BEFW11s4 Computer permission problems (I think)

Similar Messages

Maybe you are looking for