BEFW11S4 Cutting out! Help?

Recently, I took a stab at hooking my Xbox 360 into the wireless network, but ran into a few problems. They looked like simple setting adjustments, nothing that would crash the network, I thought. The whole thing crapped out. The two computers we use wouldn't pick up the signal, nor would the Xbox. After some tinkering, the network's back up, everyone's connected, and the Xbox is wallowing in a pool of sultry unproductivity.
For reference, the devices on the network are:
1. Powerbook G4, running 10.4.11
2. A Toshiba (I think), running Vista
3. & the Xbox 360
Also, the router is a Wireless-B, BEFW11S4, with firmware 1.52.02.
However, the signal drops out anywhere from 1 - 4 times a day. I have to unplug it each time to get it back up and going. Now, I know how to access the settings page and all that noise, but once inside, most of it is Greek to me.
So, any ideas? It's killing me to open up my computer and have it tell me, "No, get your **bleep** (haha! auto-edit!) up and reset the router. Then you can waste time."
Thanks in advance.

May be you can do, when you Reflash the Firmware on your router, then you can login toyour router setup page, and change the wireless settings of your router.
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

All OnDemand Shows/Movies VERY jittery/cutting out -- HELP

We have rebooted our internet connection multiple times and done the automated repairs on our set top box twice now. For the last 3-4 days anything we watch using OnDemand (be it free TV shows, premium channels or any movies we buy---doesn't matter, happens to everything) it is choppy, jittery and picture/sound breaking up non-stop (not intermittent). It does NOT do this with DVR or regular TV shows/movies, only things via OnDemand. Can you please assist me with this issue because I'm not sure what else to do?

You will probably have to contact Verizon rather than ask us. See contact us option which is on all the Verizon web pages.
How is your interenet behaving. OnDemand uses a internet connection.

Hi Can anyone help. I'm having problem with FaceTime on my IPAD .It connects but cuts out Simolarly when someone calls me it connects , then cuts out ThanksBrian

Hi Having problem with FACETIME on my IPAD Connects to call but then cuts out , similarly calls in connect & cut out Can someone help. Brian

My ipad is doing the same thing to it won't let me except a incoming call on Facebook and I don't know what to do

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Help for face cut out

Hi guys,
I'm from France, and tomorrow 9AM, i've to make a passeport to my little daughter. The things is what the French gvrnmnt ask for the profile photos it's a kind of difficult, neutral face, mouth closed, open eyes, grey or lighter background... I've np idea if someone can do something for me, I need someone to edit my daughter photo, a few thing : cut out the hair, make a lighter background, and delete the shadows on the face, i spend 1 hour to get the photo witha six month baby, and now 3 trying to doing by myself the work, i red, watch youtube tutorial, and i sure i suck at photoshop. My email [removed], inbox if there is some helpfull guy, who wants to help me a little bit.
Cheers.
LM

I understand. I don't feel like waiting so much time, so I need to choose.
1 - Start studying my old 2011 book since I have it here, and see if I can make it before the exam is updated (I have no idea how much time it'll take me to study the entire book though, even if I study everyday).
2 - Buy the Motion 5 book and get that certification while waiting for the new FCPX book to come out.
3 - Just waiting for the new FCPX book (which means wasting time waiting).
Thanks for your answers and patience.

Need help with my Facetime. The Audio cuts out when I open the app, only on my Macbook though.

I've noticed this problem since I upgraded to Yosemite. My Facetime app does not work. Either I will connect someone and I will constantly hear the ringing of a facetime call even after the call has been answered, or my speakers will cut out and we won't be able to hear each other.
Can anyone help me out?

First take the steps described in the comment of texasgrape1 in this discussion. If there's no change, see below.
Open the Sound preference pane and select the Input tab. Make sure the microphone you're trying to use is selected and that there's a response on the volume meter when you speak into it. If any other sound input devices are shown in the device list, what are they?

I have downloaded a CD from iTunes onto my matchbook pro but the first three songs cut out after a few seconds? Help!

I have downloaded a CD from iTunes onto my Macbook pro but the first three songs cut out after a few seconds? Help!

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

My 2 year old ipad keeps cutting out any help please

i pad 16 GB, version 7.1.2 (11D257)
pad keeps cutting out and shows blank screen
already updated
how do I clear the storage

Toddlers are so helpful! :D
Here's an article that will walk you through restoring it.
https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing

Need help cutting out images

Hey
I realize what Im asking for might be complicated. But any
help or direction I can get will be appreciated.
I want to right something that will take a photo realistic
image, say maybe a 400x300 photo of anything really, and cut out
peices of the photo, so that I can manipulate these peices after.
For example...if its a photo of a guy riding a bike and hes wearing
a blue shirt....I want to cut out the blue shirt part and change
its color on the fly, just by clicking on the blue shirt.
Any ideas??
Oh and does this process have a name?

Yes, you're right - it is complicated!
The reason is that with a photo of a guy wearing a blue
shirt, that blue shirt is actually made up of hundreds of different
subtle shades of blue.
So to implement this, you'd need to perform a number steps,
some of which are fairly complex:
1) allow the user to select a point in the image
2) read the colour at that point. You might find you need to
take an average of a small area around that point to get a better
approximation of the percieved colour at that point because the
colour of pixels within a seemingly 'flat' area of colour can
actually vary significantly. (this is why the photoshop inkdropper
tool offers 3x3 and 5x5 average options).
3) gradually 'scan' outwards from the pixel coordinate
clicked on, checking each adjacent pixel in the image and comparing
the difference in colour value against the initial colour selected
(using getPixel). If it is within a certain tolerance, you can
include it in the selection. You'll need to create an array or
another image object to store the results in. Repeat this process
until there are no more adjacent pixels that fall within the colour
tolerance range.
4) Use an RGB->HSB routine to convert the colour values to
HSB, so that you can then adjust the 'Hue' value, and finally
convert back to RGB. I have one here:
http://robotduck.com/content/articles/director/imageManipulation/shiftHue.txt
And whether it has a name?..
well, the tool which selects an area within a certain colour
range in photoshop is called the 'magic wand', so I guess that's a
good way to refer to it - a magic wand function. And to change the
colour by 'rotating' the colour values through the colour spectrum
(which is what my example code does) is called 'shifting the hue'
of the colours.
hope this helps!
- Ben

Wireless internet keeps cutting out. Please help asap

Ok I have a wrt54g. We have a dell laptop wireless, and a dell desktop wired along with a PS3 wireless. The desktop doesn't lose the internet. But ever so often on the laptop and sometimes (but not nearly as often as the ps3) we will just lose the internet. It will just cut out and the bars will go away and then it will come back on. Also it will display in the screen limited or no connectivity. I also want to set it up securely so no one can steal it. I know this is a lot but any help would make my life a lot easier at the moment. Thank you so much cause computers are not really my thing.

Ok got the firmware updated. For the security under wep it says default key and gives me an option of 1-4 to choose. Then wep encryption and gives me two choices 64 bits 10 hex digits and then 128 bits and 26 hex digits. Then the passphrase and gives me a spot to put something in but also has a generate button. Can I put my own in or not? Then it has at the bottom slots for all 4 keys to put something in each of them. What does this mean? Maybe I am totally lost and not as hard as it seems.

Screen has cut out, desperately need help!

The screen on my iMac has cut out. It has happened before and I have had to restart the system to get it back. This time however that hasn't worked. I have booted up the system and can access the files using a second machine via ethernet and the screen did come back briefly when I pressed the ctrl ket before going blank again. I am pretty sure it is not a hardware problem but desperately need a suggestion to help recover the situation.

When I start the machine the screen briefly goes white after the startup chime then goes black again. The same thing happens when I do command-R. The system continues to boot up and I can access the files from my other machine. On two or three ocasions the screen has momentarily come on when I have touched a key or the mouse. For a brief second everything looks OK then it is gone again.

SOUND CUT OUT!!! HELP!

Sound cuts out when trying to stream.
Please help.

Troubleshooting information:
Sound Levels - Troubleshoot
Sound – No Sound After Upgrade
Sound – No Sound After Upgrade (2)

Need help cutting out a middle section of a song!

I have a song that I want to cut out a large portion of the middle.
I have no Garageband experience, so googled/youtubed info.
I THINK I have properly split in the two places where the cut needs to be made, but when I delete that portion between the 2 splits, I cannot get it to join properly! It's like only a small bit has been deleted, NOT what I split and deleted!
Please help!!! I need this done by today!
Thanks so much!

I THINK I have properly split in the two places where the cut needs to be made, but when I delete that portion between the 2 splits, I cannot get it to join properly!
That should work. Have you "Snap to Grid" enabled? Then turn the grid off; you toogle it on and off in the "control" menu in the main menu bar (Choose Control > “Snap to Grid ⌘G).

Need a little help simplifying an image so it can be cut out on a vinyl cutter

Hi all, I'm after a bit of help.
I'm wondering if I get hold on of say an image of a car, could I have this converted to black and white and then delete parts of it so that it can be cut out on a vinyl cutter?
When converting it, I would like most of the image deleted but to keep the rough outlines and some shading etc so the image looks great and can be cut out on a cutter.
I know I'm not explaining this too well but I hope you can understand what I mean.
Many thanks,

You might be in for quite a bit of work if you want to convert an image of a car to something that can be cut on a vinyl cutter and successfully turned into cut vinyl graphics. Not only do the resulting paths need to be clean, but all the line work must be large/thick enough in order to be successfully cut on the vinyl cutter and weeded by hand before applying release tape. Really thin line work can get chewed up by the plotter blade or it can get messed up when you're trying to weed away the negative vinyl areas of the cut graphics.
The current live trace filter in Illustrator is not vinyl cutter friendly. The problem is it produces too many small objects that are too small to cut and it makes objects that are really stroked, open path segments. Vinyl cutting requires all of the paths to be closed. Sometimes I'll have better luck using the "Create Work Path" function in Photoshop for this sort of thing. Take a high contrast black and white or grayscale image, use the Color Range dialog box to create a selection and then use the Create Work Path command. It typically generates paths that are all closed. After that you do a little editing work to get rid of tiny objects too small to cut. Go to the File menu and select Export Paths to Illustrator.
For the best results you have to digitize the paths by hand. It goes much faster if you have a graphics tablet.

Airtunes cutting out wirelessly-trying ethernet connection-help

Ihave an Imac with a local wireless network to a lynksysN router-connected to a PC.( I use files betweent the PC and the Mac) I have two airport express-one for each stereo in the home and an apple TV. I get a lot of cut outs on airtunes....so since I have the abilty to wire the house I have put an ethernet cable from the Imac to the Lynksys router. Now my internet is faster on the Mac. Now how can I play my music on the Mac via the airport express devices. When I disable the airport to the router I no longer can see mutlitple speakers, or my apple TV in my itunes. All I really want is to have my airtunes work without cutting out. I know I have all the required hardware and I just don;t quite understand how to make it all work yet. Thanks

I am also streaming music using iTunes to an airport express from an airport extreme. I also have the music cutting in and out problem and may have just solved it tonight by changing the channel setting from the default automatic to a channel that doesn't seem to have interference. For me, that seems to be channel 1. Automatic was always picking channel 11 and that cut in and out.
BTW, my airport express is only 70' away, but downstairs and my floors are concrete. Anybody else have such short range?

BEFW11S4 Cutting out! Help?

Similar Messages

Maybe you are looking for