BEFW11S4 Problems, Can't Enter Configuration

Is there a way to restore the factory settings on a BEFW11S4 without entering the internal configuration pages? I was trying to open a port for SHOUTcast use when the router disconnected me and stopped working. My PC won't recognize if the cable between the router and the modem is unplugged, and the IP given to access the router won't work along with any other internet-related activity.

Never mind, I got it. Didn't know you had to hold the reset button for 30 seconds. However I would still like help with opening ports for use.
Message Edited by yadumey on 08-09-2007 02:34 PM

Similar Messages

I can not enter cd or dvd in the superdrive. The entrance is blocked. What may be happening. It is a configuration problem? Thank you.

I can not enter cd or dvd in the superdrive. The entrance is blocked. What may be happening. It is a configuration problem? Thank you.

In the newer iMac, a bar blocks the slot if the drive fails to prevent inserting a disk that may not ever come out. You'll need professionl help to get this sorted.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

Step by step, how did you arrive at seeing this agreement?

Oct 22, 2013 11:58 PM downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guid

Oct 22, 2013 11:58 PM
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........running 10.8.5 til today................???????? Can run in safe boot, but what do i do now ??? thanks
MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHz

Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

Downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc'

downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........thanx
running 10.8.5 til today........................???????? Can run in safe boot, but what do i do now ??? thanks

Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

Glassfish password problem - can 'configure' but not 'admin'

Hi,
Using the release 1.10.179 with Glassfish Community 3.0.1 on Windows XP - I can deploy and configure my APEX listener, but once it's there I cannot get to the 'listenerAdmin', 'listenerStatus' screens - it doesn't accept the passwords that I created for the 'adminlistener' and 'managelistener' users.
Any ideas on how to get past this?

scott.wesley wrote:
I installed this successfully in Windows 7, just tonight.
I would suggest first double checking the PDF instructions for the configuration - I found it easy to miss a small step.
Double check your port numbers you're using, too. Mine defaulted to 4848 for the admin, but 8080 for listener admin.I don't think that it's a ports problem as 'wrong' ports result in getting a page not found error. I've also found that I'm having problems running APEX, seems to be on the wwv_flow.accept...
I'll have another look at the documentation!

HT201412 i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

Okay. You are not entering the correct passcode. If you forgot or it is not taking your passcode then you will have to restore.
See http://support.apple.com/kb/HT4113

HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade Lawrence

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Multiple Yosemite woes: programs won't start, can't enter Time Machine, etc.

Hello Linc et al.,
I have been having Yosemite problems similar to those discussed elsewhere (e.g. iMac 27" late 2013 and Yosemite) (albeit with 10.10.1, Mid-2010 MacBook Pro): can't enter Time Machine, although it seems to be backing up; programs including Illustrator, EndNote, and Boinc don't start, or only after an hour or two (others, including Microsoft Office, seem okay). They will start normally in safe mode, but not for a newly created user. Many permission repairs carried out (seems okay except for a couple recurring printer-related messages), disk is okay, PRAM and SMC reset. Spent some time with various tech support, so most of these have been tried several times.
The solution here com.apple.xpc.launchd & com.apple.mdworker.bundles pollute logs with errors worked through one restart - there were two mystery uids, owning many files - but not through a second.
I have followed the permission repair procedure from another post (discussions.apple.com/message/27015992#27015992); the initial return was 639, and now it is 0. Restarted since then, nothing appeared to change.
Below is what I get from the test suggested in the first thread mentioned, I hope there is something informative here! I'll study it myself, but don't know what might or might not matter.
Thanks,
Barbara
Start time: 11:29:32 12/05/14
Model Identifier: MacBookPro6,2
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 29 minutes
SATA
 HGST HTS541515A9E630
Diagnostic reports
 2014-12-05 mdworker32 crash x8
 2014-12-05 mdworker crash x14
 2014-12-05 plugin-container crash x2
 2014-12-05 xfig crash
Log
 Dec 5 11:14:35 com.adobe.illustrator.43768: Service exited due to signal: Terminated: 15
 Dec 5 11:14:38 WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
 Dec 5 11:15:21 com.apple.quicklook: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
 Dec 5 11:16:39 en1: 802.11d country code set to 'US'.
 Dec 5 11:16:39 en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
 Dec 5 11:18:25 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:39 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:41 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:47 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:51 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:58 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000e6b4c0 {NSLocalizedDescription=Id is malformed.}
 Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000c6ba00 {NSLocalizedDescription=Id is malformed.}
 Dec 5 11:19:11 BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
 Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
 Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
 Dec 5 11:22:58 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
 Dec 5 11:23:09 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
 Dec 5 11:26:00 [com.apple.calendar.store.log.persistent.operation] [CalOperationQueue (x-coredata://UUID/ExchangePrincipal/p3): <CalExchangeSyncAccountOperation: 0x7f92fbe96830> failed with error Error Domain=NSURLErrorDomain Code=-1003 "A server with the specified hostname could not be found." UserInfo=0x7f92fe1cbfa0 {NSUnderlyingError=0x7f92fe3021f0 "A server with the specified hostname could not be found.", NSErrorFailingURLStringKey=https://EMAIL/ews/exchange.asmx, NSErrorFailingURLKey=https://EMAIL/ews/exchange.asmx, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=A server with the specified hostname could not be found.}.]
 Dec 5 11:26:05 process WindowServer[150] caught causing excessive wakeups. Observed wakeups rate (per sec): 3474; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 120600
 Dec 5 11:26:05 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
 Dec 5 11:26:06 Error loading dyld shared cache uuid UUID: 0x8
 Dec 5 11:29:38 process smcDiagnose[687] caught causing excessive wakeups. Observed wakeups rate (per sec): 49533; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 48870
 Dec 5 11:29:38 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
kexts
org.virtualbox.kext.VBoxDrv (4.1.18)
org.virtualbox.kext.VBoxUSB (4.1.18)
Daemons
com.oracle.java.JavaUpdateHelper
 com.adobe.versioncueCS4
com.apple.installer.osmessagetracing
com.oracle.java.Helper-Tool
 com.cloudpath.maccmd
 com.mozy.backup
 net.cloudpath.HelperTool
 com.adobe.fpsaud
 com.bombich.ccchelper
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.CS4ServiceManager
uk.co.markallan.clamxav.freshclam
com.adobe.AdobeCreativeCloud
uk.co.markallan.clamxav.clamscan
 com.mozy.status
org.macosforge.xquartz.startx
 com.hp.printerAgent
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.nvidia.CUDASoftwareUpdate
 com.adobe.ARM.UUID
com.google.keystone.user.agent
Startup items
/System/Library/StartupItems/CUDA/CUDA
/System/Library/StartupItems/CUDA/StartupParameters.plist
 /Library/StartupItems/HP IO/HP IO
 /Library/StartupItems/HP IO/Resources/version.plist
 /Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HWNetMgr/HWNetCfg
/Library/StartupItems/HWNetMgr/HWNetMgr
 /Library/StartupItems/HWNetMgr/StartupParameters.plist
/Library/StartupItems/HWPortDetect/HWPortCfg
/Library/StartupItems/HWPortDetect/HWPortDetect
/Library/StartupItems/HWPortDetect/StartupParameters.plist
/Library/StartupItems/OpenAFS/OpenAFS
 /Library/StartupItems/OpenAFS/StartupParameters.plist
/Library/StartupItems/rEFItBlesser/rEFItBlesser
/Library/StartupItems/rEFItBlesser/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
App extensions
com.getdropbox.dropbox.garcon
Apps
 /Applications/Dropbox.app
Contents of /etc/hosts (checksum 2520548989)
127.0.0.1 localhost
127.0.0.1 [name removed]-macbook-pro.local.
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Contents of /etc/ssh_config (checksum 1281775184)
 Host *
 SendEnv LANG LC_*
 Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/sshd_config (checksum 2518667249)
 SyslogFacility AUTHPRIV
AuthorizedKeysFile .ssh/authorized_keys
 UsePrivilegeSeparation sandbox # Default for new installations.
 AcceptEnv LANG LC_*
Subsystem sftp /usr/libexec/sftp-server
 XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.mozy.status.plist (checksum 976541881)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.mozy.status</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHome Status.app/Contents/MacOS/MozyHome Status</string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
 </dict>
 </plist>
Contents of /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist (checksum 572360244)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>EnvironmentVariables</key>
<dict>
<key>COM_NVIDIA_CUDAPREF_FROM_LAUNCH_AGENT</key>
<string>TRUE</string>
</dict>
<key>Label</key>
<string>com.nvidia.CUDASoftwareUpdate</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>Program</key>
<string>/usr/bin/open</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>file:///Library/PreferencePanes/CUDA%20Preferences.prefPane</string>
</array>
<key>RunAtLoad</key>
<false/>
 </dict>
 ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 2403555562)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>23</integer>
<key>Minute</key>
<integer>50</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
 </dict>
 ...and 1 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist (checksum 2451978492)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
 ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS4.plist (checksum 1565429098)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS4</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS4/Server/bin/VersionCueCS4d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS4</string>
<key>UserName</key>
<string>root</string>
 </dict>
 </plist>
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 801575064)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
 </dict>
 </plist>
Contents of /Library/LaunchDaemons/com.cloudpath.maccmd.plist (checksum 810825832)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.cloudpath.maccmd</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.cloudpath.maccmd</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
 ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.mozy.backup.plist (checksum 35683335)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.mozy.backup</string>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHomeB ackup</string>
</array>
<key>ServiceIPC</key>
<false/>
<key>UserName</key>
<string>root</string>
<key>GroupName</key>
<string>wheel</string>
<key>SoftResourceLimits</key>
<dict>
<key>NumberOfFiles</key>
 ...and 9 more line(s)
Contents of /Library/LaunchDaemons/net.cloudpath.HelperTool.plist (checksum 1144074417)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>net.cloudpath.HelperTool</string>
<key>MachServices</key>
<dict>
<key>net.cloudpath.HelperTool</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/net.cloudpath.HelperTool</string>
</array>
 </dict>
 </plist>
Contents of /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist (checksum 2883943871)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>org.macosforge.xquartz.privileged_startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/privileged_startx</string>
<string>-d</string>
<string>/opt/X11/lib/X11/xinit/privileged_startx.d</string>
</array>
<key>MachServices</key>
<dict>
<key>org.macosforge.xquartz.privileged_startx</key>
<true/>
</dict>
<key>TimeOut</key>
<integer>120</integer>
<key>EnableTransactions</key>
<true/>
 </dict>
 </plist>
Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (checksum 4071182229)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.adobe.AAM.Scheduler-1.0</string>
<key>Program</key>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<key>ProgramArguments</key>
 <array>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<string>-mode=scheduled</string>
 </array>

Hello Linc et al.,
I have been having Yosemite problems similar to those discussed elsewhere (e.g. iMac 27" late 2013 and Yosemite) (albeit with 10.10.1, Mid-2010 MacBook Pro): can't enter Time Machine, although it seems to be backing up; programs including Illustrator, EndNote, and Boinc don't start, or only after an hour or two (others, including Microsoft Office, seem okay). They will start normally in safe mode, but not for a newly created user. Many permission repairs carried out (seems okay except for a couple recurring printer-related messages), disk is okay, PRAM and SMC reset. Spent some time with various tech support, so most of these have been tried several times.
The solution here com.apple.xpc.launchd & com.apple.mdworker.bundles pollute logs with errors worked through one restart - there were two mystery uids, owning many files - but not through a second.
I have followed the permission repair procedure from another post (discussions.apple.com/message/27015992#27015992); the initial return was 639, and now it is 0. Restarted since then, nothing appeared to change.
Below is what I get from the test suggested in the first thread mentioned, I hope there is something informative here! I'll study it myself, but don't know what might or might not matter.
Thanks,
Barbara
Start time: 11:29:32 12/05/14
Model Identifier: MacBookPro6,2
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 29 minutes
SATA
 HGST HTS541515A9E630
Diagnostic reports
 2014-12-05 mdworker32 crash x8
 2014-12-05 mdworker crash x14
 2014-12-05 plugin-container crash x2
 2014-12-05 xfig crash
Log
 Dec 5 11:14:35 com.adobe.illustrator.43768: Service exited due to signal: Terminated: 15
 Dec 5 11:14:38 WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
 Dec 5 11:15:21 com.apple.quicklook: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
 Dec 5 11:16:39 en1: 802.11d country code set to 'US'.
 Dec 5 11:16:39 en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
 Dec 5 11:18:25 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:39 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:41 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:47 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:51 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:18:58 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
 Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000e6b4c0 {NSLocalizedDescription=Id is malformed.}
 Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000c6ba00 {NSLocalizedDescription=Id is malformed.}
 Dec 5 11:19:11 BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
 Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
 Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
 Dec 5 11:22:58 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
 Dec 5 11:23:09 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
 Dec 5 11:26:00 [com.apple.calendar.store.log.persistent.operation] [CalOperationQueue (x-coredata://UUID/ExchangePrincipal/p3): <CalExchangeSyncAccountOperation: 0x7f92fbe96830> failed with error Error Domain=NSURLErrorDomain Code=-1003 "A server with the specified hostname could not be found." UserInfo=0x7f92fe1cbfa0 {NSUnderlyingError=0x7f92fe3021f0 "A server with the specified hostname could not be found.", NSErrorFailingURLStringKey=https://EMAIL/ews/exchange.asmx, NSErrorFailingURLKey=https://EMAIL/ews/exchange.asmx, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=A server with the specified hostname could not be found.}.]
 Dec 5 11:26:05 process WindowServer[150] caught causing excessive wakeups. Observed wakeups rate (per sec): 3474; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 120600
 Dec 5 11:26:05 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
 Dec 5 11:26:06 Error loading dyld shared cache uuid UUID: 0x8
 Dec 5 11:29:38 process smcDiagnose[687] caught causing excessive wakeups. Observed wakeups rate (per sec): 49533; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 48870
 Dec 5 11:29:38 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
kexts
org.virtualbox.kext.VBoxDrv (4.1.18)
org.virtualbox.kext.VBoxUSB (4.1.18)
Daemons
com.oracle.java.JavaUpdateHelper
 com.adobe.versioncueCS4
com.apple.installer.osmessagetracing
com.oracle.java.Helper-Tool
 com.cloudpath.maccmd
 com.mozy.backup
 net.cloudpath.HelperTool
 com.adobe.fpsaud
 com.bombich.ccchelper
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.CS4ServiceManager
uk.co.markallan.clamxav.freshclam
com.adobe.AdobeCreativeCloud
uk.co.markallan.clamxav.clamscan
 com.mozy.status
org.macosforge.xquartz.startx
 com.hp.printerAgent
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.nvidia.CUDASoftwareUpdate
 com.adobe.ARM.UUID
com.google.keystone.user.agent
Startup items
/System/Library/StartupItems/CUDA/CUDA
/System/Library/StartupItems/CUDA/StartupParameters.plist
 /Library/StartupItems/HP IO/HP IO
 /Library/StartupItems/HP IO/Resources/version.plist
 /Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HWNetMgr/HWNetCfg
/Library/StartupItems/HWNetMgr/HWNetMgr
 /Library/StartupItems/HWNetMgr/StartupParameters.plist
/Library/StartupItems/HWPortDetect/HWPortCfg
/Library/StartupItems/HWPortDetect/HWPortDetect
/Library/StartupItems/HWPortDetect/StartupParameters.plist
/Library/StartupItems/OpenAFS/OpenAFS
 /Library/StartupItems/OpenAFS/StartupParameters.plist
/Library/StartupItems/rEFItBlesser/rEFItBlesser
/Library/StartupItems/rEFItBlesser/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
App extensions
com.getdropbox.dropbox.garcon
Apps
 /Applications/Dropbox.app
Contents of /etc/hosts (checksum 2520548989)
127.0.0.1 localhost
127.0.0.1 [name removed]-macbook-pro.local.
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Contents of /etc/ssh_config (checksum 1281775184)
 Host *
 SendEnv LANG LC_*
 Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/sshd_config (checksum 2518667249)
 SyslogFacility AUTHPRIV
AuthorizedKeysFile .ssh/authorized_keys
 UsePrivilegeSeparation sandbox # Default for new installations.
 AcceptEnv LANG LC_*
Subsystem sftp /usr/libexec/sftp-server
 XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.mozy.status.plist (checksum 976541881)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.mozy.status</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHome Status.app/Contents/MacOS/MozyHome Status</string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
 </dict>
 </plist>
Contents of /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist (checksum 572360244)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>EnvironmentVariables</key>
<dict>
<key>COM_NVIDIA_CUDAPREF_FROM_LAUNCH_AGENT</key>
<string>TRUE</string>
</dict>
<key>Label</key>
<string>com.nvidia.CUDASoftwareUpdate</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>Program</key>
<string>/usr/bin/open</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>file:///Library/PreferencePanes/CUDA%20Preferences.prefPane</string>
</array>
<key>RunAtLoad</key>
<false/>
 </dict>
 ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 2403555562)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>23</integer>
<key>Minute</key>
<integer>50</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
 </dict>
 ...and 1 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist (checksum 2451978492)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
 ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS4.plist (checksum 1565429098)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS4</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS4/Server/bin/VersionCueCS4d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS4</string>
<key>UserName</key>
<string>root</string>
 </dict>
 </plist>
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 801575064)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
 </dict>
 </plist>
Contents of /Library/LaunchDaemons/com.cloudpath.maccmd.plist (checksum 810825832)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.cloudpath.maccmd</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.cloudpath.maccmd</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
 ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.mozy.backup.plist (checksum 35683335)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.mozy.backup</string>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHomeB ackup</string>
</array>
<key>ServiceIPC</key>
<false/>
<key>UserName</key>
<string>root</string>
<key>GroupName</key>
<string>wheel</string>
<key>SoftResourceLimits</key>
<dict>
<key>NumberOfFiles</key>
 ...and 9 more line(s)
Contents of /Library/LaunchDaemons/net.cloudpath.HelperTool.plist (checksum 1144074417)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>net.cloudpath.HelperTool</string>
<key>MachServices</key>
<dict>
<key>net.cloudpath.HelperTool</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/net.cloudpath.HelperTool</string>
</array>
 </dict>
 </plist>
Contents of /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist (checksum 2883943871)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>org.macosforge.xquartz.privileged_startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/privileged_startx</string>
<string>-d</string>
<string>/opt/X11/lib/X11/xinit/privileged_startx.d</string>
</array>
<key>MachServices</key>
<dict>
<key>org.macosforge.xquartz.privileged_startx</key>
<true/>
</dict>
<key>TimeOut</key>
<integer>120</integer>
<key>EnableTransactions</key>
<true/>
 </dict>
 </plist>
Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (checksum 4071182229)
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
 <dict>
<key>Label</key>
<string>com.adobe.AAM.Scheduler-1.0</string>
<key>Program</key>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<key>ProgramArguments</key>
 <array>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<string>-mode=scheduled</string>
 </array>

How can i wrote configuration file in Log4j

iam new log4j .i have seen one small programme in log4j examples folder ..i e. shown below
Sort.java
=====
package examples;
import org.apache.log4j.PropertyConfigurator;
import org.apache.log4j.Logger;
import org.apache.log4j.Priority;
Example code for log4j to viewed in conjunction with the {@link
examples.SortAlgo SortAlgo} class.
This program expects a configuration file name as its first
argument, and the size of the array to sort as the second and last
argument. See its source
code for more details.
Play around with different values in the configuration file and
watch the changing behavior.
Example configuration files can be found in <a
href="doc-files/sort1.properties">sort1.properties</a>, <a
href="doc-files/sort2.properties">sort2.properties</a>, <a
href="doc-files/sort3.properties">sort3.properties</a> and <a
href="doc-files/sort4.properties">sort4.properties</a> are supplied with the
package.
If you are also interested in logging performance, then have
look at the {@link org.apache.log4j.performance.Logging} class.
@author Ceki Gülcü */
public class Sort {
static Logger logger = Logger.getLogger(Sort.class.getName());
public static void main(String[] args) {
 if(args.length != 2) {
 usage("Incorrect number of parameters.");
 int arraySize = -1;
try {
 arraySize = Integer.valueOf(args[1]).intValue();
 if(arraySize <= 0)
 usage("Negative array size.");
catch(java.lang.NumberFormatException e) {
usage("Could not number format ["+args[1]+"].");
PropertyConfigurator.configure(args[0]);
int[] intArray = new int[arraySize];
logger.info("Populating an array of " + arraySize + " elements in" +" reverse order.");
for(int i = arraySize -1 ; i >= 0; i--) {
 intArray[i] = arraySize - i - 1;
SortAlgo sa1 = new SortAlgo(intArray);
sa1.bubbleSort();
sa1.dump();
// We intentionally initilize sa2 with null.
SortAlgo sa2 = new SortAlgo(null);
logger.info("The next log statement should be an error message.");
sa2.dump();
logger.info("Exiting main method.");
static void usage(String errMsg) {
 System.err.println(errMsg);
 System.err.println("\nUsage: java org.apache.examples.Sort " + "configFile ARRAY_SIZE\n"+
"where configFile is a configuration file\n"+" ARRAY_SIZE is a positive integer.\n");
System.exit(1);
and
SortAlgo.java
==========
package examples;
import org.apache.log4j.Category;
import org.apache.log4j.NDC;
Example code for log4j to viewed in conjunction with the {@link
examples.Sort Sort} class.
SortAlgo uses the bubble sort algorithm to sort an integer
array. See also its source
code.
@author Ceki Gülcü */
public class SortAlgo {
final static String className = SortAlgo.class.getName();
final static Category CAT = Category.getInstance(className);
final static Category OUTER = Category.getInstance(className + ".OUTER");
final static Category INNER = Category.getInstance(className + ".INNER");
final static Category DUMP = Category.getInstance(className + ".DUMP");
final static Category SWAP = Category.getInstance(className + ".SWAP");
int[] intArray;
SortAlgo(int[] intArray) {
this.intArray = intArray;
void bubbleSort() {
CAT.info( "Entered the sort method.");
for(int i = intArray.length -1; i >= 0 ; i--) {
NDC.push("i=" + i);
OUTER.debug("in outer loop.");
for(int j = 0; j < i; j++) {
 NDC.push("j=" + j);
 // It is poor practice to ship code with log staments in tight loops.
 // We do it anyway in this example.
 INNER.debug( "in inner loop.");
if(intArray[j] > intArray[j+1])
 swap(j, j+1);
 NDC.pop();
NDC.pop();
void dump() {
if(! (this.intArray instanceof int[])) {
DUMP.error("Tried to dump an uninitialized array.");
return;
DUMP.info("Dump of integer array:");
for(int i = 0; i < this.intArray.length; i++) {
DUMP.info("Element [" + i + "]=" + this.intArray);
void swap(int l, int r) {
// It is poor practice to ship code with log staments in tight
// loops or code called potentially millions of times.
SWAP.debug( "Swapping intArray["+l+"]=" + intArray[l] +
 " and intArray["+r+"]=" + intArray[r]);
int temp = this.intArray[l];
this.intArray[l] = this.intArray[r];
this.intArray[r] = temp;
This program expects a configuration file name as its first
argument, and the size of the array to sort as the second and last
argument. See its source
code for more details.
please help me how can write that configuration file
thanks

Hi bala,
check that log4j manual I pointed to in yer previous thread.
This is a pot-boiler config file... Copy it into some file say "props.conf" and use it.
# Set root logger level to DEBUG and its only appender to A1.
log4j.rootLogger=DEBUG, A1
# A1 is set to be a ConsoleAppender.
log4j.appender.A1=org.apache.log4j.ConsoleAppender
# A1 uses PatternLayout.
log4j.appender.A1.layout=org.apache.log4j.PatternLayout
log4j.appender.A1.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %m%nCheers,

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

IMac shutting down on startup - Can't enter safe mode as wireless keyboard doesn't connect quickly enough

Hi all,
I was planning to use bootcamp to install Windows 7 on my mid-2010 21.5" iMac.
Bootcamp recommended I usk disk utility to repair the drive. I had a snow leopard install disk in the drive, (I didn't realise Lion already had it's recovery tools built in to the hard drive.)
Disk utility said it can't repair the drive and recommended I start backing up my data (because the hard drive could be about to fail). Fine, so I restarted, with the intention of backing up everything (all my work for the last 12 months). So I press the power button, grey screen comes up, then the apple logo, then a progress bar appears (found this odd at first, but later found out it has something to do with disk utility and a bad hard drive) it gets to around 20% and then all power is cut from the iMac and the hard drive stops/everything powers down.
Now, I can't seem to get my iMac to boot into recovery utilities or into safe mode because it doesn't connect to the wireless keyboard in time before it shuts down. So, if I use a wired keyboard (I have a dell USB keyboard that I can take from the office), will I be able to boot into safe mode?
Also, if the disk in drive is causing the problem, then I can't remove it because the wireless keyboard won't connect/register any keypresses.

Ok so, status report:
Wired keyboard is non responsive when I plug it in before/during boot. So i guess it needs to be plugged in before the iMac shut down. That's that out the window.
Plugged in headphones and I can't hear the startup chime so don't know when to start holding buttons.
To make matters worse, the wireless keyboard is no longer paired with the iMac, getting a green blinking light which indicates it wants to connect to a computer or device.
So I can't enter any commands whatsoever, can't remove the disk in the drive or boot safe mode. It's my worst nightmare.

Trying to back up to external hard drive (iomega). Instructions say to erase hard drive. Won't entirely erase. Can't enter iomega in Time Machine. Computer is minimac, operating system is OSx 10.6.8.

Trying to back up to external hard drive (iomega). Instructions say to erase hard drive. Won't entirely erase. Can't enter iomega in Time Machine. Computer is minimac, operating system is OSx 10.6.8.

All you need to upgrade the iBook for Tiger is another 128 MBs of RAM. It has both Firewire and USB ports. You do want to upgrade it for what you plan to do. The problem you may continue to have, however, may be due to the fact that the age of the computer is such the disk controller does not support hard drive volumes larger than 128 GBs, which is probably the reason the drive won't mount.
The reason you get DU errors is likely because the drive was formatted using the Intel Tiger version of DU, while you were using the Jaguar version. That's a definite no-no.

Problem in Application Help Configuration in Solution Manager

Hi Experts,
Here I facing one problem during Application Help configuration..
When I am going through application help for Solman Configuration it's taking me to standard erp help..
Where as in SR13, under PlainHtmlHttp,
In path tab I had given saphelp_sm40/helpdata for solution manager document.
But for other standard t-code it's giving actual application help.
where for SMSY,SOLAR01 etc i am not getting the application help.
Looking for advices.
Thanks & Regards,
Sumanta Chatterjee

Dear Sumanta,
This depends on how you want to (or how you can) use this http://help.
sap.com site.
At first you must be aware of the different areas on this site, these
areas have different URL structures, for example:
- http://help.sap.com/saphelp_erp2004 <<< for mySAP ERP
- http://help.sap.com/saphelp_47x200 <<< for R3 Enterprise
- http://help.sap.com/saphelp_nw04 <<< for SAP NetWeaver 04
- http://help.sap.com/saphelp_sm32 <<< for SAP Solution Manager 3.2
The main problem is that in the area "http://help.sap.com/saphelp_sm32"
there is only online documentation for the Solution Manager
functionality.
Can you please check the table SBAON_CCHK with transaction SE16.
The following record must exist:
MANDT COMPONENT NAME_EN
xxx ST Solar Help
If this record does not exist, please create this record manually.
This should help resolve the issue.
Regards
Amit

BEFW11S4 Problems, Can't Enter Configuration

Similar Messages

Maybe you are looking for