BEFW11S4 Problems with Laptop and Xbox 360

For the past few weeks my Linksys BEFW11S4 has been malfunctioning. When I try to connect to the wireless network from my laptop, it says "Not Connected" but I can still access the internet for a few minutes before it really disconnects. Unplugging the router and plugging it back in lets me connect again, but still it gives the "Not Connected" message and boots me off within a few minutes. It has also been causing problems with my Xbox 360. It is connected with an ethernet cable to the router, but every time I turn the Xbox on it says that it is not connected. After I unplug the router and plug it back in, the problem is fixed, and I can go online on my Xbox for as long as I want. Anyone know how to fix this?

It seems that router is not configured properly ..... checkthe firmware version on the status page of router ..... .
Upgrade the firmware if required .....

Similar Messages

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Problems with WRT160N and Xbox 360 - please help

Hello,
I have recently purchased a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes around 10 min to find a game while in the lobby. I don't get kicked out or signed out of my profile it just takes a long time. It says that my NAT type is Open. I have isolated that the problem is the router because if I plug an ethernet cable from the 360 to the DSL modem I find games instantly. I have looked up port forwarding and opened the ports on the 360 and specifically for modern warfare 2 and it actually made my NAT type go to strict, ironic. I have spent 5 hours trying to mess with this and can't seem to get it working right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.
Solved!
Go to Solution.

I have already tried reducing the MTU as well as the Beacon Level, Threshold, and Fragmentation. That did not work. To get the ip address of the modem is where I do cmd prompt ipconfig right. If so, I have not done that yet and since I am at work I will do that when I get home. the ports I have opened on the router for the xbox were 80, 88, 53, and 3074. Like I said when I did that it actually got worse cause my NAT was open but then it went to Strict.

Calendar syncing problems with laptop and iphone

Calendar entries on my iphone don't find their way to my ical on my laptop. When i connect and sync all ical entries are double entered on my phone. Please can anyone help.
Driving me mad as i just can't rely on it!

I think this might be the same problem I'm having, except that I'm having the same problem with both the calendar and the address book. I know things are syncing correctly between my work laptop, my home laptop, my home desktop, and MobileMe. My problem is with my phone. Everything synced fine until I upgraded to version 3. Then the phone would not update at all. I've tried to turn on the Contacts and Calendars in the Settings, but the "switches" won't stay ON. The Mail switch stays on with no problem. I finally forced the phone to sync through iTunes, but then I had double entries in the calendar and double contacts (on the phone only). So .. how to I get it to sync automatically, and how do I get rid of the double entries and contacts? Should I completely delete my account on my phone, and start over? I don't want to mess something up.

Laptop and xbox 360 deal?

is best buy still participating in the "buy a 699+ laptop, get a free xbox 360" deal? i cant find any of the participating laptops on the site and im ready to shop!!!!
Solved!
Go to Solution.

Hi bobodilis,
Best Buy's participation in this particular program ended on 6/18/2011. The offer has since been removed from our website and is no longer available at any of our retail stores, on BestBuy.com or through our phone sales team. As explained in this post from Microsoft's Windows Experience Blog, however, offer end dates do vary by retailer.
I hope this helps!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Problem with laptop and docking station

Hello.
We have two laptops with two docking station. Both laptops w/ docking have the same problem:
When the computer is turned off, and its still connected to the docking station, the fan in the computer start to run really fast. The fan goes on for a good while. This is making alot of noise, which can be annoying for the person using the office. When the computer is on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?
1. Product Name and Number
HP ProBook 6460b
Docking Station VB043AA
2. Operating System installed
Windows XP 32-bit
3. Error message
No error message.
4. Any changes made to your system before the issue occurred
No recent changes.
Thanks in advance.
- Betroger
This question was solved.
View Solution.

It is possible the notebook is not completing the shutdown in full when docked.
Make sure the BIOS is the most recent version.
Here is the most recent one to try should you need it.
Other than that, I am afraid I do not have much else for this. I did some research, but I didn't really find anything that was exactly like this. I found scenarios where the fan would run at full speed when docked, but this happened whether the notebook was booted or not. You can try your luck in the business support forums to see if they may have something that is a little more helpful.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems with NAT and xbox live

i could once connect to xbox live using my westell 6100g which i received as an upgrade from the regular 6100 about 5 days ago. It worked fine yesterday and today it decided to change my NAT from "Open" to "Moderate".
how can i access my NAT so i can fix this frustrating problem? or how can i fix this ? I tried microsofts solutions including port forwarding but nothing works. my guess is my only option is to change the NAT but the interface of westell 6100's page is barely user friendly, and im a tech savvy guy. any help ?

Your other thread
http://www.dslreports.com/forum/remark,24291307
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Updated to 7.3.1, PC and Xbox 360 can't connect

Hey, anyone else having problems getting PCs and Xbox 360s to connect to the AirPort Extreme after the 7.3.1 update? Wired or wireless, my PC (Vista, with and without SP1) and my Xbox 360 (with the official wireless network adapter) won't connect.

I am in the same boat...
7.2 worked great... 7.3.1 does not even show in the network list. Also, downgrading it does not fix the issue?!?!?
- Jay

Networking my imac and other pc, laptop, vonage, and xbox 360 AAAAAAAAAAAH!

I posted this in the iMac intel based part before I realized it was not the iMac I have. Oh keepers of the board, I apologize.
Here is my dilema:
I need to find a way to make my iMac wireless and don't know what would be best for my set up. I have cable broadband through a rca router, which then hooks up to my vonage phone device, which then connects to my linksys WRT150N which has an emachines pc through ethernet and a sony laptop wireless connected to it. I want the iMac, which is downstairs to be hooked up to the internet wirelessly if possible and my son also has a wireless adapter for his XBOX 360 that he wants to use as well. I know this sounds tres' complicated and I have given lots of information here but if anyone knows what I should get for this situation, I would be most appreciative! Airport of some sort? Third party stuff that's compatible? I am so confused! Would a better router be the answer? and a wireless thingee for the iMac?

Simply connect the RCA modem to the Linksys router. The iMac, Vonage, PC laptop and XBox will then connect wirelessly to the Linksys. To make the iMac G4 wireless purchase the Airport Extreme card from Apple:http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M88 81LL/A
cheers
mrtotes

Wrt54g and xbox 360 wireless gaming adapter

First post here and I have a problem. The WRT54G has wirlelss disabled. It is connected to a WAP11B wireless access point which is connected in 802.11b mode to a laptop, Wii, xbox 360, iPhone. The router is connected to a dsl modem. Three wired ethernet computers are connected. And I am running WEP with 128, and I changed the SSID to something other than linksys.
I'd like to change to use the WRT54G as a wireless enabled connection. Then remove the WAP11B, and put a pcmcia 802.11g card in the laptop and connect the xbox360 with a microsoft xbox 360 wireless gaming adapter which should connect at 802.11g.
The problem is the xbox 360 displays a message that there are duplicate networks using my SSID. Is there someway to upgrade to 802.11g without getting that error message on the xbox 360? Let me know if there are any questions I can answer in order to more clearly explain the problem.
Thank you,
Jordan
Solved!
Go to Solution.

Did you try to change the SSID...If not change the Network SSID and try...

Weird Problems with WDS (Macbook + xbox)

Hi - Hope someone can help...
I have a Powermac G4 that does not support an airport card. So I bought 2 Airport Express' last year and set up a WDS network to act as a bridge between my Cable modem which is on a different floor to my Mac. After some fiddling this worked perfectly. Had the odd guest with a windows pc who could log on no problem. I did not use wireless security.
A few months ago my girlfriend got a 13inch White Macbook. Connected no problem. I decided to add a WEP password using 6 letters. No Problems.
2 weeks ago I got and xbox 360 with a wireless adapter. Couldn't connect as it said that the password was not correct - not the right format. I decided to temporarily take my security off. Xbox connected fine.
Weird thing was the macbook could no longer get on to the web. Tried putting the password back on. No luck only now xbox cannot connect either.
No I have tried changing the settings in all possible ways but neither macbook nor xbox can connect to the internet??? I have gone so far as factory reseting bot airports and setting up from scratch. But still neither can get internet.
The bridge to the G4 still works fine. I'm at my wits end. Any ideas?
The macbook can see the airports and appears to connect but no internet (same with xbox accept can see but not connecting to airport when tested). The network settings on the macbook say that it is using a self assigned ip therefore may not be able to connect to internet...

Hello Freedgull. Welcome to the Apple Discussions!
To facilitate the WDS set up, try the following:
o Perform a "hard" reset on the AirPort Extreme Base Stations & a "factory default" reset on the AirPort Express Base Stations (AX) before setting up the WDS.
o Place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete.
o To avoid having to "switch" wireless networks during the WDS setup, attach each of the remote/relay base station, via an Ethernet cable, to the main base station. Of course, this would be dependent on the AirPort types used for the main/relays/remotes.
o Be sure to jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS as these will be required during the setup.
o When enabling wireless encryption, configure the relay/remote base stations first and the main base station last. I suggest using WPA for your security level.

Starz Play and Xbox 360

I am not new to this and I DO know what I'm doing. I have the network set up the way it always has been. Its ethernet, and its going through the switch and Fios router. I recently downloaded Starz Play and it works great on my Desktop, Laptop, but NOT on my 360. I have been streaming Vista MCE to it for months, and it all works GREAT with no network interference of any sort. The application doesnt show my 360 as an available device for it to extend to, so I am stumped. I searched the interwebs already, so any advice is more than appreciated. Thanks!

From Starz Play FAQ under "Connect to your TV"
"Connecting Starz Play To Your TV
    Starz Play offers many very simple ways of connecting Starz Play to your TV for your viewing pleasure. For XP MCE and Vista MCE users you can choose to connect your TV to your computer Using the XBOX 360 as an extender.
It's easy to have room-to-room entertainment throughout your home with a PC running Microsoft Windows XP Media Center Edition 2005 and Xbox 360. All you need are a few components to get things started:
    • A PC running Microsoft Windows XP Media Center Edition 2005 or Vista with MCE
    • An Xbox 360 with the Xbox 360 Wireless Media Adapter
    • A wired or wireless (preferably 802.11a) home network
    • A broadband Internet connection
With your Media Center PC hooked up to your home network, you're ready to introduce the Xbox 360 to the mix so you can start enjoying your photos, music, movies, and recorded TV in other rooms of your home. You can experience all this in high-definition if you've got a TV or monitor that can deliver it.
Please Click Here for step by step instructions from Microsoft on connecting XBOX 360 to your PC as a media extended.
The link then sends you here: http://www.microsoft.com/windowsxp/mediacenter/extender/setup/default.mspx
Again, any help is appreciated.

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

[SOLVED] Problem with modules and udev

Hi everybody,
I've been configuring Arch on my new laptop the last few days and today as I was going to perform the first backup, I noticed that my external HDD does not show up in /dev/ when I plug it in. I figured it could be a problem with udev and the fact that in my /etc/rc.conf I use MOD_AUTOLOAD="no" with an explicit list of MODULES generated with hwdetect (as suggested in the wiki).
To "solve" this I just changed MOD_AUTOLOAD to "yes" and after a reboot everything worked fine.
My questions are:
1) Is it possible to keep that feature (udev detects usb drives and creates the corresponding /dev/sdX) while having MOD_AUTOLOAD="no" ? What is/are the appropriate module(s) I have to put in my MODULES array ?
2) What other such "basic" MODULES could be very useful that hwdetect does not tell about.
Sorry for any English mistakes (I'm not a native speaker) and thank you in advance for your help,
yms
Last edited by yms (2010-01-06 12:48:20)

1) Thank you, it works perfectly.
2) Yes I know the question is weird. The thing is I have no precise idea at the moment and I just wanted to know if there are other very widely used features such as the one described in 1) that hwdetect ommits and that has to be loaded in MODULES.
Anyway, thank you very much, I consider this matter [solved]

[SOLVED] Problem with zsnes and xcb_io.c on arch64

Well after doing a pacman -Syu, zsnes won't start, when i run it, it gives me the next output
[pablo@pablo-laptop ~]$ zsnes
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.
ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.
Use ZSNES -? for command line definitions.
Starting Mouse detection.
Unable to poll /dev/input/event11. Make sure you have read permissions to it.
Unable to poll /dev/input/event10. Make sure you have read permissions to it.
Unable to poll /dev/input/event9. Make sure you have read permissions to it.
Unable to poll /dev/input/event8. Make sure you have read permissions to it.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
zsnes: xcb_io.c:515: _XReply: Assertion `!dpy->xcb->reply_data' failed.
Abortado
it was working fine until yesterday, i've been searching about xcb_io.c but sadly i haven't found anything useful.
Edit:
it seems i can run it fine as sudo but not as a regular user
Edit2:
well it seems that there was something wrong with my .zsnes folder, i deleted it (well first i made a backup of it) and i can run zsnes again.
Edit3:
well, it seems i got a problem with opengl and my catalyst driver (but i'm guessing because i haven't tried with radeon) because i can use it without opengl but as soon as i change the video option to use opengl it crashes with the same error (zsnes: xcb_io.c:515: _XReply: Assertion `!dpy->xcb->reply_data' failed.) should i file a bug report or something???
Last edited by jpablo (2011-08-30 17:12:55)

Finally i had to edit my .htaccess file adding a RewriteBase rule to it.

BEFW11S4 Problems with Laptop and Xbox 360

Similar Messages

Maybe you are looking for