BEFW11S4 reflash firmware with solid red Diag?
Is it possible to reflash the firmware on a BEFW11S4 (I believe v1, there is no v# after the model number) with a solid red Diag LED? I cannot access the HTML control panel since the router never fully boots. I git this used and didn't know it was **bleep**... Thanks.
You need to access the router's setup page to do the upgrade or in your case, to reflash the firmware. If you're currently unable to establish a connection to the router (i.e. no IP address) then do a RESET. Once the wired client grabs an IP address from the router, ping the router's IP address. Proceed with accessing the setup page if the router sends out replies. However, if the request times out or if the ping results show "hardware failure" or "media disconnected" then this may mean that the BEFW11S4 is bricked.
Similar Messages
-
Solid RED appointments with no rhyme or reason?
Does anyone know why some appointments have a red background color while others do not? I recently changed my Calendar >> Options >> Calendars/Desktop >> Appointment Color >> to “None”. Now some of my appointments have a solid red background color and others have “None”. I first thought this was a conflict alert of some sort but it is not. The Red and/or “None” colored appointments may overlap one another or stand alone; their “Show As” can be Free, Tentative, Busy, or Out of Office; and they can be recurring or single appointments. All day appointments are not affected nor does they presence (or not) affect the time specific appointment color(s) in any way. The only consistent trait I see is that this only occurs to current or future appointments (all red is removed from those past ) and they occur within the Start of Day and End of Day times established in General Calendar Options >> Formatting. Otherwise...this no color/red color seems to be random :-( Help! Anyone? :-)
Is it possible that you have more than one calendar in your BB? I noticed that after I synced mine with Outlook, I ended up with some appts in red, some in blue, & others in green. Then I saw that it somehow had 3 calendars instead of my typical/usual one... I believe what caused it was the fact that I had a different email address listed for CICAL and SMIME. (One had my email addy, the other had the BB email addy.)
If this is the case & you wish to only use 1 calendar, backup your data (use desktop manager) because the following steps will irreversibly merge everything into one calendar:
Open the CALENDAR
Press the MENU button
Select OPTIONS
Then type MOVE on the keypad. (Note: What you type will not be displayed on the screen, so don't freak out.)
Choose YES when asked to move all appts into the base system calendar. **** Which calendar is the base? ****
Upon completion, do a hard reset by taking the battery out while the device is still on, then put the battery back in. (Some call this a battery pull.)
**** This will move all calendar entries existing on the Device Default calendar to the active calendar shown under Options > Advanced Options > Default Services. ****
If calendar entries are split between two or more BIS calendars (different email addresses), you should complete the following steps per calendar:
Go to Options > Advanced Options > Default Services.
Verify the correct email address is shown for Calendar [CICAL].
Press the back arrow and save the changes if prompted.
In the Advanced Options menu, choose Service Book.
Highlight the entry for the calendar you do not want. This will appear as [email protected] [CICAL].
Press the menu button and select Delete.
By deleting a CICAL, any calendar entries associated with it are moved to a Device Default calendar. This step can be repeated if additional calendars contain entries you want to move.
Once all desired entries have been moved to the Device Default calendar using the above steps, follow the above first steps to move the calendar data into 1, then resend service books to the BlackBerry smartphone.
Service books can be resent to the BlackBerry smartphone by completing the tasks in KB02830.
If the calendar is synchronized to a computer with BlackBerry Desktop Manager software, the configuration for BlackBerry Desktop Manager will need to be reset and set up again before completing another synchronization. For more information on synchronization settings, see KB17022.
Source: http://www.port3101.org/featured-blackberry-kb-articles/1672-kb19240-how-merge-multiple-calendars-in...
~^~ CrypticAzn ~^~
- Pls. click on the LIKE button of this post if I was able to help you in some way. Thanks!
- If I've helped resolve your issue, don't forget to go to the top-right of this post and click on "OPTIONS > ACCEPTED SOLUTION". Thanks!
- See my profile for helpful links! -
7914 Expansion module - all lights are solid red
Hi,
I am trying to get an expasion module 7914 to work with my 7960.
These are some extracts from my config:
CONFIG (Version=4.0(1))
=====================
Version 4.0(1)
Cisco CallManager Express
load 7914 S00104000100
load 7960-7940 P0030702T023
At the moment when I go into the ephone with the expansion module, I can NOT enter the "add-on 1 7914" command. It is simply not available and not listed when I do a "show a?" command under the ephone
It seems to me that I am using the correct firmware but I can't get the expansion module to do anything. It simply sits there with a blank screen and all the buttons lighted in solid red.
The 7960 attached to it is working properly.
Any ideas why this is happening?
Thank youI am responding because we also had difficulty getting our two 7914 expansion modules to work with our 7960.
I'm not sure I understand your problem with configuring the ephone. Are you using a telnet into the CME gateway and the CLI (Command Line Interface). I would do it that way, not through any kind of browser or GUI.
You will need to log in in enable mode and then
CME# config t
CME# ephone
CME# type 7960 addon 1 7914
Hope this helps some... Try TAC if all else fails. -
When opening an image in Adobe Camera Raw in CC, the image is solid red
The image is solid red and not my image. I have been working on an image and several layers of work done on things like white balance, color cast. When I add a CAL I cant get to ACR at all. If im on the previous CAL I can open in ACR but with the red image. I am on a Mac 10.8.5 Have the latest version of CC installed. Help!
An hour later I went back and on a copy of my Background layer, I opened the image in ACR. So what are the parameters of ACR that I don't understand?You can't do that in ACR, but you can if you open it in Photoshop and use the crop tool there.
Gene
(If this answers your question, mark it correct.) -
My LED has turned a solid Red color. It's on all the time and is only off when I pull the battery out. My phone does still charge. I've done everything to get rid of it even wiping my blackberry and upgrading the software. I read something about Blackberry Music Gateway? I do use my pearl to listen to Pandora everyday and iheart radio with a 3.5 cable that plugs into the dash of my truck, but it never did this before. Any help would be greatly appreciated!
Thanks!
JustinJustin, so you've wiped the device completely and reloaded a new OS... still does the same. Anytime the BlackBerry is powerd on, the LED lights up RED?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Why have i got a solid red circle on the phone icon at the bottom of my home screen
I have a solid red circle on the phone icon at the bottom of my home screen.I Get a notification message come up on my home screen telling me that i have a new voicemail mesage.
When i dial into voicemail it tells me there are no messages.I Have rang my network provider(3) they did a restore on my phone using itunes on my computer(remotely)but the circle is still there.I took it to my local Apple store(Milton Keynes) when he took the sim card out with the phone still switched on it dissapeared.But when he reinserted the sim it came back. Just wondered if any one else has had this problem.Could it be the sim card?Phoned up 3 they still had my problem on file.told me to go to my local 3 store and ask for a replacement sim.Got the sim the assistant inserted it hay presto no red dot,just waiting for the new sim to be activated.
Thanks for your advice much apprieciated -
My extender work fine for the last 8 months but now the system light just blinks red and the GPS is solid red even though the antenna is next to a window?
See the Network Extenders User Guide:
http://www.verizonwireless.com/support/pdf/network_extender_user_manual.pdf
There is a page dedicated to the light codes this device will display along with instructions on how to handle each situation. -
My HP Envy HD always had a solid blue light on the tower panel. Last night, the tower panel had a solid red light & monitor said no signal, check video connection, so hubby changed HDMI cable. Still didn't work, but somehow he did get it to work & monito, computer functional. Problem, I still have a solid red line on tower panel. The tower light used to be solid blue - what happened to that? It's solid red consistently, whether I'm using computer or whether it's asleep. Called HP support and was told my computer is fine. They couldn't answer what happened to the blue light. I'm concerned. Red always is a warning, right? Help! Thanks for any advice.
You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Color picker bar on illustrator cc is broken. It is a solid red block instead of showing all of the colors.
Falcon Design,
It seems that the issue is caused by a corrupt folder called en_US or similar (depending on language) within the Adobe Illustrator 18 Settings folder, see post #7 by Jules in this thread,
https://forums.adobe.com/thread/1595766
so the solution should be to move or rename that folder (or the whole Adobe Illustrator 18 Settings folder).
You can find the folder in Move the folder (follow the link with that name) with Illy closed.
As a temporary roundabout way, you can select the lower rectangle to the right of the rainbow and DoubleClick to apply that to change the top rectangle and the values: the lower colour is the right one. -
What do folders with a red circle and white dash in them mean?
i bought a used 2 year old macbook pro last week did an erase and install with leopard and once that was done with nothing transfered firewire the drive had over 20 gigs of used space on it so i started snooping around and saw a number of folders in a folder labeled base system that have a solid red circle with a white dash in the middle next to them after clicking on them it says i do not have permission even though i am in under admin? any ideas to what it is what to do or why it took over 20 gigs to install? i think it took less than 10 on the imac we have. thanks
one4truth wrote:
i bought a used 2 year old macbook pro last week did an erase and install with leopard and once that was done with nothing transfered firewire the drive had over 20 gigs of used space on it so i started snooping around and saw a number of folders in a folder labeled base system that have a solid red circle with a white dash in the middle next to them after clicking on them it says i do not have permission even though i am in under admin?
the fact that you are an admin doesn't mean that you automatically have access to everything. those folders are owned by the system and have restricted permissions. you should not mess with them. those permissions are mostly restricted to prevent curious users with itchy fingers from damaging the system. as an admin user you can change those permissions and give yourself access to those folders but as i said you shouldn't.
any ideas to what it is what to do or why it took over 20 gigs to install?
20 Gigs sounds like a bit too much. have you installed any programs besides leopard itself? -
8830 Will not charge, shows solid red LED when connected
I plugged my phone in to my wall charger Saturday night as I always do-Sunday morning the phone was dead and would not turn on. It shows a solid red light on the LED.
I cannot seem to get it to charge. Briefly, the charging battery icon showed up on the screen, but now it went out. Just sitting there, every once in a while the LED goes out.
Help, anyone? I've tried taking out the battery and reinserting both with the phone plugged in and not.I had same problem except I discovered that as long as I did not let the battery fully die, it would charge with no issues. But if it died completely, I would get the red light briefly, it would go out and then lightning bolt on battery would show up but no charge at all.
-
I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?
jacknilI found an answer to this on another page (I was having the same problem) This worked for me:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
more here: https://discussions.apple.com/thread/5596831 -
I have just purchased Apple TV and an ipad, i have uploaded my itunes to icloud from my pc and activated sharing, i now have all my tunes on the ipad and pc and all have a little cloud with a red arrow next to them so all seems well, but when i go on Apple TV, and i'm all signed in and all boxes checked, i click on music, my music, and all files are empty, should i not see my itunes and be able to play them from my apple TV, or have i misunderstood what the cloud is for.?
Any answers please. Apple TV 3rd Gen, Ipad Air.Welcome to the Apple Community.
You can't play music from the computer if there is none there. If you are using iTunes Match you should now be able to download and play all your music on the Apple TV from the music feature on the main page. -
I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files -
I just got new ipad mini....I want to delete all of the music that was synced from my itunes account. I have went through and deleted some songs one by one but some have a cloud icon with a red arrow on them.....is there a simple way just to delete them?
Yes there is. Those songs are not actually on your iPad. They are in iCloud ready for download if you choose to do so. If you want to remove them go to Settings>iTunes & App Store>Show All>Music>Off. You can also do this in Settings>Music>Show All Music>Off.
Maybe you are looking for
-
Clip from STP heard, not seen in Viewer, not heard in sequence
I made a clip with a limiter in STP. OPened in FCP and though I can hear it in Viewer, I can't see the wave form. Then when I drop it in a sequence I can't hear it at all. What's my problem?
-
I need a Windows XP Boot Disk CD
Hello, I have a Satellite L35-S2151 Laptop and it will not load windows all the way as I get a blue screen "Unmountable Boot Volume". I looked up the error message on Microsoft's website and I need to have a Windows XP CD to start up my machine. My
-
Advance payment make to vendor through pretty cash
Dear Experts... In my company maintaining only ONE petty cash account. User required to make the Advance Payment to Vendor through petty cash. i removed the post automatically check box in petty cash a/c and posted the entry f-48. 29A Vendor a/c
-
I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.
-
Do you have a good handle on Copy Data?
How about a better question such as assuming you know what copy data is, do you have a handle on it? Otoh how about an even better better question such as do you know what copy data is? To all those who don't know what copy data is, ask what's copy d