BEFW11S4 v2 Wireless Problems w/ Vista
I've have a BEFW11S4 v2 (firmware version: 1.45.10) wireless router for several years. For the past year I've been running a Vista laptop along with my XP desktop. The Vista laptop has been connected via wireless and desktop wired for the past year without a problem.
About a week ago, I upgraded my Time Warner Cable Road Runner service to add phone service. The upgrade required Time Warner to come out and replace my cable modem. Since then, I can't connect to the internet via my router. My laptop sees the wireless network, and even connects to it, but it does not allow me to access the internet.
I understand from reading this forum that there were some problems with compatibility with Vista (surprise!). I want to know if anyone has figured out a work around to this problem. Obviously, it worked with my Vista laptop before.
Thanks!
As you Modem has been replaced....you need to reconfigure the router
For the instruction click here
Similar Messages
-
Hi all, I am new to this whole message and thread thing, so I apologize in advance if I break any protocols.
I have a Linksys 2.4 GHz (BEFW11S4 ver. 2) Wireless Access Point Router, and it works just great as a router when I have devices "hard-lined" in to it via Cat 5 cables. However, I am having problems getting devices to connect to the Internet through the router via Wireless connections.
I used to have this workin great, as I got the router back in 2002 or something, but then like a year and a hlaf ago, it stopped working with wireless. I just thought something broke and I used it only with direct Cat 5 connections.
Well, on this Christmas break I decided to have a go at figuring it out and I just downloaded and upgraded the latest Firmware. I also have the Router configured with a new SSID name and set up for DHCP.
I think I am almost there, but for some reason I cannot get Internet Access!!
I have the Channel Set to 6 on both the PC and the Router, and I have a solid Green light on my PC with a very strong Signal strength. It is recognizing the router, because it is reading the new SSID name. Also, the kids got a Wii for Christmas and I can see the Router there, but it fails when it tries it's connection test.
Is there something basic I am missing or something that I can try? Any help that anyone can provide would be greatly appreciated. I tried to read some old threads, but the issues were never exactly the same.
Thank you in advance!
KuJoCheck the Ip address under wired & wireless connection ..... as it shows connected under the same .....
If it is showing any valid Ip 192.168.1.X ..... try connecting to the internet ......
also try to disable the firewall first on the wireless computer ...... -
VIsta Wireless Problems with New FIOS Install July 2009
I recently had FIOS telephone, INternet andTV intstalled. All was well except on my Vitsa laptop I cannot maintain a steady wireless conneciton with the Actiontec MI424WR router. I hit the Web and found out that many have had this complaint and that there is an ongoing conversation about whose fault the problem is. I had flawless service under TIme- Warner with my Vista Wireless so I did not intially assign blame to Vista or my laptop. I do recall the Verizon installer mentinoed "problems with Vista" but he did not elaborate. I spent all day yesterday researching and attempting every fix suggested on numerous web sites. All failed except one.
Essentially, I now use my LinkSys Router in front of the Actiontec MI424WR router. I found the instructions to do this on numerous web sites after researching FIOS Vista wireless problems. The LinkSys router handles only wireless. Now my Vista laptop never drops a connection. I still have acess to FIOS TV guide and on demand so the fix did not interfere with FIOS router TV functions.
THe bottom line is that it would appear that there is a problem with the Actiontec MI424WR router and Vista. Fortunately for me I had the Linksys ROuter available. Verizon - you need to look into this. Based on what I have experienced I cannot recommend FIOS internet for those with VIsta computers until tjhis is addressed.
From what I have researched, Verizon claims it is a Vista problem. Beta testors of WIndows 7 have reported the same issues with FIOS and Actiontec MI424WR router. My experience and that of others who have devised the fix I employed would clearly suggest that Verizon needs to look into this and get this problem solved.
Steve B.My neighbor had a similar issue. When trying to figure it out we found out that there is a problem with some of the Intel drivers when connecting to some g class routers. We upgraded the wireless drivers on the computer and bingo the problem went away. This was on an Intel-R pro wireless. If you have Intel-R pro wireless on your computer, try upgrading to the current driver set and see if that helps you too.
http://downloadcenter.intel.com/Default.aspx?lang=eng and then input the device number to search for a driver
====================================================================================
Error exists between keyboard and chair. -
I have see a few posts on this but no real answer or it was in reference to XP, not Vista.
I installed Vista Premium yesterday and I installed the drivers. Everything works fine... except I cannot get the wireless to connect to my router.
The ethernet connects to the internet without a problem. It is just the wireless. It can see the networks, and then when I choose my network (which is unencrypted) it flashes to the negotiating screen really quickly then straight to the "Windows cannot connect" and when I click diagnose the problem. Vista hasn't got a clue as to why it can't connect.
Someone else posted this exact same issue, then they edited their post saying they fixed it but never posted what the issue was.
Anyone have an idea?
ThanksThere was a misnamed thread that centered on Vista Home Premium 64-bit and MacBook Pro that dealt in essence with wireless network problems.
http://discussions.apple.com/thread.jspa?threadID=1434242&tstart=50
They eventually either installed XP or were going to try Vista 32-bit.
Properties -> diagnose on the connection status works better, sometimes I have to disable and let it create a new one, and this wired connection, I don't have wireless. -
Officejet 4500 Vista Wireless Problem
I'm trying to print to my new Officejet 4500 from a notebook running Vista using a wireless connection with no luck. When I try to print, a message pops up saying "Windows cannot print due to a problem with the current printer setup".
I have no problems printing to this printer from a desktop running XP using a wireless connection and I have no problems with the laptop connection to wireless (I can surf the internet with no problems).
I have:
Used the disc that came with the printer to set up both the laptop and desktop.
Then, I downloaded the current drivers and firmware from HP and installed that on the laptop
I have checked the printer setup using the wireless connection wizard on the printer, and the printer reports no problems
I have manually added the printer to the laptop
It has to be a problem with Vista or my laptop.
Any ideas would be appreciated. I am all out of them now!Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
If that does not work, disable your security system's firewall (Norton, McAfee, etc).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Airport Extreme Utility problem with Vista (works with XP, MacOS)
Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it. -
What u hear problems in vista 32bit
#What u hear problems in vista 32bit2 I just installed the newer variety of the x-fi notebook card with the wireless broadcast function, and for whatever reason installing the drivers failed the first time, I tried a clean install after that, and the microphone is displayed as not available and what u hear isn't present either, so is there a problem in the driver installation or are those features just non existent in the newer software I also noticed that line in works and the microphone input doesn't, gah, windows fixta is irritating,
EDIT: I found out how to get what u hear to work, I kind of felt stupid but all you have to do is right click in the recording device manager and hit show disabled devices and boom what u hear and the microphone input are there, for what reason I don't know why they were disabled in the first place, but hope this helps anyone with the same problem+Re: "What U Hear" Missing in Win7G ?
Agreed! I have an X-FI Extreme, upgraded to win 7, installed the latest audio drivers, and have just spent the last 2 hours trying to get my "what u hear" back without any luck at all.
I'll also mention that "disabled devices" are shown in the recording options, so that is not the issue.
I was using vista before with the exact same hardware and "what u hear" was available. The driver version was 5.2..200 dated 4/02/07 ... The current driver for windows-7 is 5.2..208 dated 3/08/2009. Maybe installing an older driver would do the trick? I don't know if that would work as I haven't been able to find the old driver I was using for download (just been bombarded with broken links). I'm also guessing that you'll be held hostage to the latest drivers in windows 7.
Get the latest drivers to lose functionality? Sounds like something apple would pull on you!
If anyone has a solution for this, please let us know, otherwise I'll be rolling all the way back to good old XP again. -
Wireless Problem in windows 7 intel wifi link 5100agn
i bought a dv7 1270us laptop in january. everything was fine until the last 3 months i started having small problems in vista. it would take 10+ minutes to connect and the speed would go up and down. then i installed windows 7 and am either having problems with the card or driver but ive tried every driver i can find and nithing has worked.. the wireless drops randonly. when it drops it doesnt lose connection the signal drops all the way down to one bar and i get maybe 10Kbps of bandwith well it takes 2 minutes to load a page of this forum atleast. When it drops it also only drops for maybe 5-10 minutes or else it stays like that until i restart but resarting always fixes it tempoparily for 10 minutes or so. toaday i tried to disconnect and reconnect to my network. as soon as i cicked connect i got a blue screen it pointed torwards netw5v64.sys i have tried re installing the drivers multiple times and the problem isnt resolved. i have sent the laptop in twice in the last 2 months one for the blue ray drive and wireless problems i am having now. they sent it back with a new blue ray drive and a new antenna for my wireless saying the card was fina it was a driver and maybe a new antenna would help with connectivity. well they were wrong. i got it back and it started overheating to 90+ degrees celcius and wireless problems were still there even though they re-imaged the hard drive so all drivers should be perfect.so i sent it back again. now i just got it back and they cleaned the heatsink and completely ignored my wireless problems. the sheet that states the repairs that were done has a circle aroubd cleaned heatsink/fan and thats it n comments or anything. then to make the icing on the cake there is a 3 inch long fairly deep scrath on my laptop i take verygood care of all of my laptops so that i can sell them used for more than a scratched up one. i am very disappointed in hp and almost dont want to send it back and loose it for another week just to get it back without anything being done again i am almost certain they would re0image the hard drive again and send it back since they didnt even do that the second time. okay back on topic is there anything anyone has heard t fix this so i dont have to send it in again. any help is appreciated
Intel! They make processors and a variety of motherboard hardware, but they seem to have a devil of a time making decent drivers. Particularly with their wireless NICs. Lately I’ve noticed a number of errors springing from the Intel WiFi Link 5100/5300 AGN family of wireless adapters. They seem to cause random bluescreen errors on Windows Vista systems. Fortnuately, there is a viable workaround:
-Right click on Computer and select Manage.
-After Computer Management opens up, go to Device Manager.
-In Device Manager, expand the Network Adapters category.
-Right-click on “Intel (R) WiFi Link 5100 AGN” and select Properties.
-In Properties, go to the Power Management tab.
-Under the Power Management tab, make sure that “Allow the computer to turn off this device to save power” is unchecked.
Apparently, the driver for the WiFi Link 5100 can’t properly handle the device going to sleep, and pulls down the whole system. Hopefully Intel will fix this in future driver updates. Until then, this workaround will have to do. -
Hi,
I am having wireless problems with my U350 laptop which I've owned for about 5 months. The wireless LED will not turn on, and when I press [Fn]+[Wireless] to toggle it on, it just shows the message "First switch on the wireless device" (see screenshot 1). The device drive settings shows that the driver is installed correctly and I have not messed with it. Windows Vista also thinks wireless is off.
The laptop came preinstalled with Windows Home Vista, and wireless was working fine until one day when the wireless LED will not light up. I have checked the BIOS settings but it shows it is enabled (see screenshot 2). I have also tried the combination of : disable WLAN in BIOS + REBOOT + enable WLAN in BIOS + REBOOT but to no avail.
Before I send my U350 off to the service center, is there a secret hidden lenovo wireless button that I can push to make sure it is not a hardware failure?
[UPDATE] I finally picked up the manual and saw that there is another slide switch on the side of the laptop to enable / disable wireless.Hello
im confused too, like you but i found the correct way for activate your wireless firs of all; you must turn activate wifi switch (on your U350's left side) second one, please press " Fn + F5 " thats it you can see your lighted wireless indicator under your toch pad
see you.
Sidki DERYA -
T42P 2374-Q39 Wireless Problems - Unable to determine exactly what driver I need
T42P 2374-Q39 Wireless Problems - I've tried every driver and followed instructions for install many times. I was able to successfully install it in the past but can't remember with driver/version I used. Using WinXP SP2 - just installed. Please help! Thanks!
Message Edited by frustrated2009 on 06-05-2009 08:48 PM
Message Edited by frustrated2009 on 06-05-2009 08:59 PMBookmark this page, its the entry page to the Lenovo support pages for your 2374-Q39. In it you see you have the Intel 2200bg wireless card so this is the correct driver to use.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions. -
I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000. Does anyone know what that means? I am using an ethernet cable so it is not a wireless problem. Trying to find out if this is realated to the iTunes upgrade. Any ideas out there?
Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728 -
Port Forwarding for HoI 2 Doomsday on BEFW11S4 V4 Wireless-B
I have been going around and around, trying to figure this out and nothing seems to be working. Does anyone know exactly what I am supposed to do, step by step, for opening up a port (or a series of them) on a BEFW11S4 V4 Wireless-B system? The game I want to play is Hearts of Iron II: Doomsday. I just can't seem to connect with this game for some reason. I have in the past with different games, but this one...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
On the first line in Application box type in ABC, in the start box type in your starting port number and End box type in your end port number, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...Make sure the start port number should be lesser than End Port...
Provide the following IP Address on the unit where you want to play the game...
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...Check if this works... -
More on wireless problems with 10.4.8+
There has been much said and discussed about wireless problems with the Macbook's with 10.4.8+ updates, both the C1D and the C2D macbooks have seen problems with a number of units.
Unfortunately, it is very hard to find real information on this website, because the forum is drowned in "wireless problems!" posts from people that have not read the previous posts.
Since there may be several unrelated wireless problems around, I'll try to specify my particular problem and add in solid information, so others can check if their system behaves like mine.
First. The symptoms:
1. The Macbook does not connect to WEP or WPA networks after sleep or being shut down.
2. The Wireless icon blinks between black and grey.
3. The Apple support information about deleting all networks and keychains WORKS, but only until next sleep or shut down. Afterwards the procedure has to be done again to connect (very annoying).
4. This may be unrelated, but Keychain Access crashes on startup and can only be run in Rosetta.
First, we need to establish a few things
1. The problem is real and is not limited to a particular Access Point (I have had problems with both a D-link 624+ and now a Netgear DG834GT from Sky Broadband.
2. The problem exists with 10.4.8 and 10.4.9 but not with 10.4.6 or 10.4.7. This I have tested multiple times.
3. It really does not matter if I use WEP or WPA.
Now. /var/log/system.log does actually output an awful lot of stuff during this.
Mar 30 10:28:00 macbook kernel[0]: IOUSBWorkLoop::closeGate - interrupt Thread being held off
Mar 30 10:28:09 macbook kernel[0]: System SafeSleep
Mar 30 10:28:09 macbook kernel[0]: hibernatepage_listsetall start
Mar 30 10:28:09 macbook kernel[0]: hibernatepage_listsetall time: 160 ms
Mar 30 10:28:09 macbook kernel[0]: pages 232036, wire 44721, act 54660, inact 16779, zf 3490, could discard act 49309 inact 63077
Mar 30 10:28:09 macbook kernel[0]: hibernatepage_listsetall found pageCount 232036
Mar 30 10:28:09 macbook kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Mar 30 10:28:09 macbook kernel[0]: IOHibernatePollerOpen(0)
Mar 30 10:28:09 macbook kernel[0]: writing 231517 pages
Mar 30 10:28:09 macbook kernel[0]: image1Size 63928832
Mar 30 10:28:09 macbook kernel[0]: all time: 6100 ms, comp time: 1440 ms, deco time: 0 ms,
Mar 30 10:28:09 macbook kernel[0]: image 210839040, uncompressed 487960576 (119131), compressed 208665872 (42%), sum1 959660ff, sum2 6b266053
Mar 30 10:28:09 macbook kernel[0]: hibernatewriteimage done(0)
Mar 30 10:28:09 macbook kernel[0]: sleep
Mar 30 10:28:09 macbook kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Mar 30 10:28:09 macbook kernel[0]: Started CPU 01
Mar 30 10:28:09 macbook kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Mar 30 10:28:09 macbook kernel[0]: System Wake
Mar 30 10:28:10 macbook lookupd[4691]: lookupd (version 369.6) starting - Fri Mar 30 10:28:10 2007
Mar 30 10:28:11 macbook mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Mar 30 10:28:12 macbook crashdump[4692]: configd crashed
Mar 30 10:28:12 macbook crashdump[4692]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:12 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:12 macbook configd[4693]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:12 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:12 macbook configd[4693]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:12 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:12 macbook configd[4693]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:12 macbook lookupd[4695]: lookupd (version 369.6) starting - Fri Mar 30 10:28:12 2007
Mar 30 10:28:13 macbook crashdump[4696]: configd crashed
Mar 30 10:28:13 macbook crashdump[4696]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:14 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:14 macbook configd[4697]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:14 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:14 macbook configd[4697]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:14 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:14 macbook configd[4697]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:14 macbook lookupd[4699]: lookupd (version 369.6) starting - Fri Mar 30 10:28:14 2007
Mar 30 10:28:14 macbook crashdump[4700]: configd crashed
Mar 30 10:28:15 macbook sudo: lindkvis : TTY=ttyp2 ; PWD=/Users/lindkvis/Projects/Bubbles/src ; USER=root ; COMMAND=/bin/cat /var/log/system.log
Mar 30 10:28:15 macbook crashdump[4700]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:15 macbook launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4699]: exited abnormally: Hangup
Mar 30 10:28:15 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:15 macbook configd[4701]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:15 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:15 macbook configd[4701]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:15 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:15 macbook configd[4701]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:15 macbook lookupd[4704]: lookupd (version 369.6) starting - Fri Mar 30 10:28:15 2007
Mar 30 10:28:16 macbook crashdump[4705]: configd crashed
Mar 30 10:28:16 macbook crashdump[4705]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:16 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:16 macbook configd[4706]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:16 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:16 macbook configd[4706]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:16 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:16 macbook configd[4706]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:16 macbook lookupd[4708]: lookupd (version 369.6) starting - Fri Mar 30 10:28:16 2007
Mar 30 10:28:17 macbook crashdump[4709]: configd crashed
Mar 30 10:28:17 macbook crashdump[4709]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:18 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:18 macbook configd[4710]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:18 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:18 macbook configd[4710]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:18 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:18 macbook configd[4710]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:18 macbook lookupd[4712]: lookupd (version 369.6) starting - Fri Mar 30 10:28:18 2007
Mar 30 10:28:19 macbook crashdump[4713]: configd crashed
Mar 30 10:28:19 macbook crashdump[4713]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:19 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:19 macbook configd[4714]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:19 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:19 macbook configd[4714]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:19 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:19 macbook configd[4714]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:19 macbook lookupd[4716]: lookupd (version 369.6) starting - Fri Mar 30 10:28:19 2007
Mar 30 10:28:20 macbook crashdump[4717]: configd crashed
Mar 30 10:28:20 macbook crashdump[4717]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:21 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:21 macbook configd[4718]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:21 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:21 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:21 macbook configd[4718]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:21 macbook configd[4718]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:21 macbook lookupd[4720]: lookupd (version 369.6) starting - Fri Mar 30 10:28:21 2007
Mar 30 10:28:22 macbook crashdump[4721]: configd crashed
Mar 30 10:28:22 macbook crashdump[4721]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:22 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:22 macbook configd[4722]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:22 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:22 macbook configd[4722]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:22 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:22 macbook configd[4722]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:22 macbook lookupd[4724]: lookupd (version 369.6) starting - Fri Mar 30 10:28:22 2007
Mar 30 10:28:23 macbook crashdump[4725]: configd crashed
Mar 30 10:28:23 macbook crashdump[4725]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:23 macbook lookupd[4728]: lookupd (version 369.6) starting - Fri Mar 30 10:28:23 2007
Mar 30 10:28:23 macbook crashdump[4727]: configd crashed
Mar 30 10:28:23 macbook crashdump[4727]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:24 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:24 macbook configd[4729]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:24 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:24 macbook configd[4729]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:24 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:24 macbook configd[4729]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:24 macbook lookupd[4731]: lookupd (version 369.6) starting - Fri Mar 30 10:28:24 2007
Mar 30 10:28:25 macbook crashdump[4732]: configd crashed
Mar 30 10:28:25 macbook crashdump[4732]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:25 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:25 macbook configd[4733]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:25 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:25 macbook configd[4733]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:25 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:25 macbook configd[4733]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:25 macbook lookupd[4735]: lookupd (version 369.6) starting - Fri Mar 30 10:28:25 2007
Mar 30 10:28:26 macbook crashdump[4736]: configd crashed
Mar 30 10:28:26 macbook crashdump[4736]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:27 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:27 macbook configd[4737]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:27 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:27 macbook configd[4737]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:27 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:27 macbook configd[4737]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:27 macbook lookupd[4739]: lookupd (version 369.6) starting - Fri Mar 30 10:28:27 2007
Mar 30 10:28:27 macbook crashdump[4740]: configd crashed
Mar 30 10:28:27 macbook crashdump[4740]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:28 macbook lookupd[4743]: lookupd (version 369.6) starting - Fri Mar 30 10:28:28 2007
Mar 30 10:28:28 macbook crashdump[4742]: configd crashed
Mar 30 10:28:28 macbook crashdump[4742]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:28 macbook launchd: Server 104b3 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4743]: exited abnormally: Hangup
Mar 30 10:28:28 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:28 macbook configd[4744]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:28 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:28 macbook configd[4744]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:28 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:28 macbook configd[4744]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:28 macbook lookupd[4746]: lookupd (version 369.6) starting - Fri Mar 30 10:28:28 2007
Mar 30 10:28:29 macbook crashdump[4747]: configd crashed
Mar 30 10:28:29 macbook crashdump[4747]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:30 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:30 macbook configd[4748]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:30 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:30 macbook configd[4748]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:30 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:30 macbook configd[4748]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:30 macbook lookupd[4750]: lookupd (version 369.6) starting - Fri Mar 30 10:28:30 2007
Mar 30 10:28:31 macbook crashdump[4751]: configd crashed
Mar 30 10:28:31 macbook crashdump[4751]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:31 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:31 macbook configd[4752]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:31 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:31 macbook configd[4752]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:31 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:31 macbook configd[4752]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:31 macbook lookupd[4754]: lookupd (version 369.6) starting - Fri Mar 30 10:28:31 2007
Mar 30 10:28:32 macbook crashdump[4755]: configd crashed
Mar 30 10:28:32 macbook crashdump[4755]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:32 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:32 macbook configd[4756]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:32 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:32 macbook configd[4756]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:32 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:32 macbook configd[4756]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:33 macbook lookupd[4758]: lookupd (version 369.6) starting - Fri Mar 30 10:28:33 2007
Mar 30 10:28:33 macbook crashdump[4759]: configd crashed
Mar 30 10:28:33 macbook crashdump[4759]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:34 macbook lookupd[4762]: lookupd (version 369.6) starting - Fri Mar 30 10:28:34 2007
Mar 30 10:28:34 macbook crashdump[4761]: configd crashed
Mar 30 10:28:34 macbook crashdump[4761]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:34 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:34 macbook configd[4763]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:34 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:34 macbook configd[4763]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:34 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:34 macbook configd[4763]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:34 macbook lookupd[4765]: lookupd (version 369.6) starting - Fri Mar 30 10:28:34 2007
Mar 30 10:28:35 macbook crashdump[4766]: configd crashed
Mar 30 10:28:35 macbook crashdump[4766]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:35 macbook kernel[0]: SIOCPROTOATTACH_IN6: en0 error=17
Mar 30 10:28:35 macbook configd[4767]: LINKLOCAL: inet6attachinterface(en0) failed, File exists (17)
Mar 30 10:28:35 macbook kernel[0]: SIOCPROTOATTACH_IN6: en1 error=17
Mar 30 10:28:35 macbook configd[4767]: LINKLOCAL: inet6attachinterface(en1) failed, File exists (17)
Mar 30 10:28:35 macbook kernel[0]: SIOCPROTOATTACH_IN6: fw0 error=17
Mar 30 10:28:35 macbook configd[4767]: LINKLOCAL: inet6attachinterface(fw0) failed, File exists (17)
Mar 30 10:28:36 macbook lookupd[4769]: lookupd (version 369.6) starting - Fri Mar 30 10:28:36 2007
Mar 30 10:28:36 macbook crashdump[4770]: configd crashed
Mar 30 10:28:37 macbook crashdump[4770]: crash report written to: /Library/Logs/CrashReporter/configd.crash.log
Mar 30 10:28:37 macbook sudo: lindkvis : TTY=ttyp2 ; PWD=/Users/lindkvis/Projects/Bubbles/src ; USER=root ; COMMAND=/bin/cat /var/log/system.log
Also here are some items from the configd.crash.log mentioned:
Host Name: ???
Date/Time: 2007-03-30 10:28:35.289 +0100
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: configd
Path: /usr/sbin/configd
Parent: launchd [1]
Version: ??? (???)
PID: 4763
Thread: 1
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0xc310ece0
Thread 0:
0 libSystem.B.dylib 0x90009bf7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082e2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082dace CFRunLoopRunInMode + 61
3 configd 0x00003b60 server_loop + 72
4 configd 0x00002d15 main + 1863
5 configd 0x000024de _start + 216
6 configd 0x00002405 start + 41
Thread 1 Crashed:
0 libstdc++.6.dylib 0x90b4441a cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 54
1 libstdc++.6.dylib 0x90b4442e cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 74
2 libstdc++.6.dylib 0x90b43fb7 cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void**) const + 69
3 libstdc++.6.dylib 0x90b43c27 cxxabiv1::__class_type_info::__do_catch(std::typeinfo const*, void**, unsigned) const + 57
4 libstdc++.6.dylib 0x90b42d45 _cxa_getglobals + 351
5 libstdc++.6.dylib 0x90b4342a _gxx_personalityv0 + 658
6 libgcc_s.1.dylib 0x90bd7acb UnwindRaiseException + 147
7 libgcc_s.1.dylib 0x90bd7c12 Unwind_Resume_orRethrow + 123
8 libstdc++.6.dylib 0x90b43797 _cxarethrow + 67
9 com.apple.security 0x911a2adf Security::KeychainCore::ItemImpl::add(Security::KeychainCore::Keychain&) + 2803
10 com.apple.security 0x911a51e8 Security::KeychainCore::KeychainImpl::add(Security::KeychainCore::Item&) + 68
11 com.apple.security 0x911b9c70 SecKeychainItemCreateFromContent + 394
12 com.apple.configd.Apple80211 0x000c2c63 addEntryToStack + 2544
13 com.apple.configd.Apple80211 0x000c4dfe updateNetstackPersonality + 796
14 com.apple.configd.Apple80211 0x000b5ce3 MorphicCFDataCreate + 1924
15 com.apple.framework.IOKit 0x90be2984 IODispatchCalloutFromCFMessage + 334
16 com.apple.CoreFoundation 0x9083e385 __CFMachPortPerform + 136
17 com.apple.CoreFoundation 0x9082e62d CFRunLoopRunSpecific + 2904
18 com.apple.CoreFoundation 0x9083f188 CFRunLoopRun + 60
19 configd 0x00004dee plugin_exec + 1825
20 libSystem.B.dylib 0x90024147 pthreadbody + 84
Thread 2:
0 libSystem.B.dylib 0x9001a0ec select + 12
1 libSystem.B.dylib 0x90024147 pthreadbody + 84
Thread 1 crashed with X86 Thread State (32-bit):
eax: 0xc310ece0 ebx: 0x911a1ffd ecx: 0xb007f940 edx: 0xa11a6680
edi: 0x0033aac0 esi: 0xa11a66c0 ebp: 0xb007f908 esp: 0xb007f8f0
ss: 0x0000001f efl: 0x00010287 eip: 0x90b4441a cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0x1cfff configd /usr/sbin/configd
0x94000 - 0x95fff com.apple.print.notification 4.7 (161.10) /System/Library/SystemConfiguration/PrinterNotifications.bundle/Contents/MacOS/ PrinterNotifications
0x99000 - 0xa0fff com.apple.SystemConfiguration.PowerManagement 111.7.0 /System/Library/SystemConfiguration/PowerManagement.bundle/Contents/MacOS/Power Management
0xa6000 - 0xa6fff com.apple.SystemConfiguration.DynamicPowerStep 1.5.0 /System/Library/SystemConfiguration/DynamicPowerStep.bundle/Contents/MacOS/Dyna micPowerStep
0xaa000 - 0xabfff com.apple.SystemConfiguration.Bluetooth 1.7.14 (1.7.14f14) /System/Library/SystemConfiguration/Bluetooth.bundle/Contents/MacOS/Bluetooth
0xaf000 - 0xaffff com.apple.SystemConfiguration.BatteryUpdater 1.1.0 /System/Library/SystemConfiguration/BatteryUpdater.bundle/Contents/MacOS/Batter yUpdater
0xb3000 - 0xc7fff com.apple.configd.Apple80211 4.5.3 (453.4) /System/Library/SystemConfiguration/Apple80211Monitor.bundle/Contents/MacOS/App le80211Monitor
0xd0000 - 0xd3fff com.apple.SystemConfiguration.ATconfig 1.8.5 (0.0.1d1) /System/Library/SystemConfiguration/ATconfig.bundle/Contents/MacOS/ATconfig
0xd8000 - 0xdafff com.apple.SystemConfiguration.EAPOLController 8.0.4 (???) /System/Library/SystemConfiguration/EAPOLController.bundle/EAPOLController
0xdf000 - 0xeafff com.apple.SystemConfiguration.IP6Configuration 1.1.1 (0.0.1d1) /System/Library/SystemConfiguration/IP6Configuration.bundle/Contents/MacOS/IP6C onfiguration
0x205000 - 0x220fff com.apple.SystemConfiguration.IPConfiguration 8.0.2 (???) /System/Library/SystemConfiguration/IPConfiguration.bundle/IPConfiguration
0x22a000 - 0x237fff com.apple.SystemConfiguration.PPPController 1.4.2 /System/Library/SystemConfiguration/PPPController.bundle/Contents/MacOS/PPPCont roller
0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x90172fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c2000 - 0x901c4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9080c000 - 0x908d4fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x90914000 - 0x90a07fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a57000 - 0x90ad6fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aff000 - 0x90b63fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90bde000 - 0x90c51fff com.apple.framework.IOKit 1.4.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c66000 - 0x90c78fff libauto.dylib /usr/lib/libauto.dylib
0x91150000 - 0x9115efff libz.1.dylib /usr/lib/libz.1.dylib
0x91161000 - 0x91300fff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x9140d000 - 0x91433fff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x92b06000 - 0x92b10fff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
Host Name: ???
Date/Time: 2007-03-30 10:28:36.649 +0100
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: configd
Path: /usr/sbin/configd
Parent: launchd [1]
Version: ??? (???)
PID: 4767
Thread: 1
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0xc310ece0
Thread 0:
0 libSystem.B.dylib 0x90009bf7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082e2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082dace CFRunLoopRunInMode + 61
3 configd 0x00003b60 server_loop + 72
4 configd 0x00002d15 main + 1863
5 configd 0x000024de _start + 216
6 configd 0x00002405 start + 41
Thread 1 Crashed:
0 libstdc++.6.dylib 0x90b4441a cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 54
1 libstdc++.6.dylib 0x90b4442e cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 74
2 libstdc++.6.dylib 0x90b43fb7 cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void**) const + 69
3 libstdc++.6.dylib 0x90b43c27 cxxabiv1::__class_type_info::__do_catch(std::typeinfo const*, void**, unsigned) const + 57
4 libstdc++.6.dylib 0x90b42d45 _cxa_getglobals + 351
5 libstdc++.6.dylib 0x90b4342a _gxx_personalityv0 + 658
6 libgcc_s.1.dylib 0x90bd7acb UnwindRaiseException + 147
7 libgcc_s.1.dylib 0x90bd7c12 Unwind_Resume_orRethrow + 123
8 libstdc++.6.dylib 0x90b43797 _cxarethrow + 67
9 com.apple.security 0x911a2adf Security::KeychainCore::ItemImpl::add(Security::KeychainCore::Keychain&) + 2803
10 com.apple.security 0x911a51e8 Security::KeychainCore::KeychainImpl::add(Security::KeychainCore::Item&) + 68
11 com.apple.security 0x911b9c70 SecKeychainItemCreateFromContent + 394
12 com.apple.configd.Apple80211 0x000c2c63 addEntryToStack + 2544
13 com.apple.configd.Apple80211 0x000c4dfe updateNetstackPersonality + 796
14 com.apple.configd.Apple80211 0x000b5ce3 MorphicCFDataCreate + 1924
15 com.apple.framework.IOKit 0x90be2984 IODispatchCalloutFromCFMessage + 334
16 com.apple.CoreFoundation 0x9083e385 __CFMachPortPerform + 136
17 com.apple.CoreFoundation 0x9082e62d CFRunLoopRunSpecific + 2904
18 com.apple.CoreFoundation 0x9083f188 CFRunLoopRun + 60
19 configd 0x00004dee plugin_exec + 1825
20 libSystem.B.dylib 0x90024147 pthreadbody + 84
Thread 2:
0 libSystem.B.dylib 0x9001a0ec select + 12
1 libSystem.B.dylib 0x90024147 pthreadbody + 84
Thread 1 crashed with X86 Thread State (32-bit):
eax: 0xc310ece0 ebx: 0x911a1ffd ecx: 0xb007f940 edx: 0xa11a6680
edi: 0x00337d30 esi: 0xa11a66c0 ebp: 0xb007f908 esp: 0xb007f8f0
ss: 0x0000001f efl: 0x00010287 eip: 0x90b4441a cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0x1cfff configd /usr/sbin/configd
0x94000 - 0x95fff com.apple.print.notification 4.7 (161.10) /System/Library/SystemConfiguration/PrinterNotifications.bundle/Contents/MacOS/ PrinterNotifications
0x99000 - 0xa0fff com.apple.SystemConfiguration.PowerManagement 111.7.0 /System/Library/SystemConfiguration/PowerManagement.bundle/Contents/MacOS/Power Management
0xa6000 - 0xa6fff com.apple.SystemConfiguration.DynamicPowerStep 1.5.0 /System/Library/SystemConfiguration/DynamicPowerStep.bundle/Contents/MacOS/Dyna micPowerStep
0xaa000 - 0xabfff com.apple.SystemConfiguration.Bluetooth 1.7.14 (1.7.14f14) /System/Library/SystemConfiguration/Bluetooth.bundle/Contents/MacOS/Bluetooth
0xaf000 - 0xaffff com.apple.SystemConfiguration.BatteryUpdater 1.1.0 /System/Library/SystemConfiguration/BatteryUpdater.bundle/Contents/MacOS/Batter yUpdater
0xb3000 - 0xc7fff com.apple.configd.Apple80211 4.5.3 (453.4) /System/Library/SystemConfiguration/Apple80211Monitor.bundle/Contents/MacOS/App le80211Monitor
0xd0000 - 0xd3fff com.apple.SystemConfiguration.ATconfig 1.8.5 (0.0.1d1) /System/Library/SystemConfiguration/ATconfig.bundle/Contents/MacOS/ATconfig
0xd8000 - 0xdafff com.apple.SystemConfiguration.EAPOLController 8.0.4 (???) /System/Library/SystemConfiguration/EAPOLController.bundle/EAPOLController
0xdf000 - 0xeafff com.apple.SystemConfiguration.IP6Configuration 1.1.1 (0.0.1d1) /System/Library/SystemConfiguration/IP6Configuration.bundle/Contents/MacOS/IP6C onfiguration
0x205000 - 0x220fff com.apple.SystemConfiguration.IPConfiguration 8.0.2 (???) /System/Library/SystemConfiguration/IPConfiguration.bundle/IPConfiguration
0x22a000 - 0x237fff com.apple.SystemConfiguration.PPPController 1.4.2 /System/Library/SystemConfiguration/PPPController.bundle/Contents/MacOS/PPPCont roller
0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x90172fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c2000 - 0x901c4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9080c000 - 0x908d4fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x90914000 - 0x90a07fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a57000 - 0x90ad6fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aff000 - 0x90b63fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90bde000 - 0x90c51fff com.apple.framework.IOKit 1.4.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c66000 - 0x90c78fff libauto.dylib /usr/lib/libauto.dylib
0x91150000 - 0x9115efff libz.1.dylib /usr/lib/libz.1.dylib
0x91161000 - 0x91300fff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x9140d000 - 0x91433fff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x92b06000 - 0x92b10fff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
Host Name: ???
Date/Time: 2007-03-30 10:28:38.516 +0100
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: configd
Path: /usr/sbin/configd
Parent: launchd [1]
Version: ??? (???)
PID: 4771
Thread: 1
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0xc310ece0
Thread 0:
0 libSystem.B.dylib 0x90009bf7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082e2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082dace CFRunLoopRunInMode + 61
3 configd 0x00003b60 server_loop + 72
4 configd 0x00002d15 main + 1863
5 configd 0x000024de _start + 216
6 configd 0x00002405 start + 41
Thread 1 Crashed:
0 libstdc++.6.dylib 0x90b4441a cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 54
1 libstdc++.6.dylib 0x90b4442e cxxabiv1::__si_class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void const*, _cxxabiv1::__class_type_info::__upcastresult&) const + 74
2 libstdc++.6.dylib 0x90b43fb7 cxxabiv1::__class_type_info::__do_upcast(__cxxabiv1::__class_typeinfo const*, void**) const + 69
3 libstdc++.6.dylib 0x90b43c27 cxxabiv1::__class_type_info::__do_catch(std::typeinfo const*, void**, unsigned) const + 57
4 libstdc++.6.dylib 0x90b42d45 _cxa_getglobals + 351
5 libstdc++.6.dylib 0x90b4342a _gxx_personalityv0 + 658
6 libgcc_s.1.dylib 0x90bd7acb UnwindRaiseException + 147
7 libgcc_s.1.dylib 0x90bd7c12 Unwind_Resume_orRethrow + 123
8 libstdc++.6.dylib 0x90b43797 _cxarethrow + 67
9 com.apple.security 0x911a2adf Security::KeychainCore::ItemImpl::add(Security::KeychainCore::Keychain&) + 2803
10 com.apple.security 0x911a51e8 Security::KeychainCore::KeychainImpl::add(Security::KeychainCore::Item&) + 68
11 com.apple.security 0x911b9c70 SecKeychainItemCreateFromContent + 394
12 com.apple.configd.Apple80211 0x000c2c63 addEntryToStack + 2544
13 com.apple.configd.Apple80211 0x000c4dfe updateNetstackPersonality + 796
14 com.apple.configd.Apple80211 0x000b5ce3 MorphicCFDataCreate + 1924
15 com.apple.framework.IOKit 0x90be2984 IODispatchCalloutFromCFMessage + 334
16 com.apple.CoreFoundation 0x9083e385 __CFMachPortPerform + 136
17 com.apple.CoreFoundation 0x9082e62d CFRunLoopRunSpecific + 2904
18 com.apple.CoreFoundation 0x9083f188 CFRunLoopRun + 60
19 configd 0x00004dee plugin_exec + 1825
20 libSystem.B.dylib 0x90024147 pthreadbody + 84
Thread 2:
0 libSystem.B.dylib 0x9001a0ec select + 12
1 libSystem.B.dylib 0x90024147 pthreadbody + 84
Thread 1 crashed with X86 Thread State (32-bit):
eax: 0xc310ece0 ebx: 0x911a1ffd ecx: 0xb007f940 edx: 0xa11a6680
edi: 0x0033aaa0 esi: 0xa11a66c0 ebp: 0xb007f908 esp: 0xb007f8f0
ss: 0x0000001f efl: 0x00010287 eip: 0x90b4441a cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0x1cfff configd /usr/sbin/configd
0x94000 - 0x95fff com.apple.print.notification 4.7 (161.10) /System/Library/SystemConfiguration/PrinterNotifications.bundle/Contents/MacOS/ PrinterNotifications
0x99000 - 0xa0fff com.apple.SystemConfiguration.PowerManagement 111.7.0 /System/Library/SystemConfiguration/PowerManagement.bundle/Contents/MacOS/Power Management
0xa6000 - 0xa6fff com.apple.SystemConfiguration.DynamicPowerStep 1.5.0 /System/Library/SystemConfiguration/DynamicPowerStep.bundle/Contents/MacOS/Dyna micPowerStep
0xaa000 - 0xabfff com.apple.SystemConfiguration.Bluetooth 1.7.14 (1.7.14f14) /System/Library/SystemConfiguration/Bluetooth.bundle/Contents/MacOS/Bluetooth
0xaf000 - 0xaffff com.apple.SystemConfiguration.BatteryUpdater 1.1.0 /System/Library/SystemConfiguration/BatteryUpdater.bundle/Contents/MacOS/Batter yUpdater
0xb3000 - 0xc7fff com.apple.configd.Apple80211 4.5.3 (453.4) /System/Library/SystemConfiguration/Apple80211Monitor.bundle/Contents/MacOS/App le80211Monitor
0xd0000 - 0xd3fff com.apple.SystemConfiguration.ATconfig 1.8.5 (0.0.1d1) /System/Library/SystemConfiguration/ATconfig.bundle/Contents/MacOS/ATconfig
0xd8000 - 0xdafff com.apple.SystemConfiguration.EAPOLController 8.0.4 (???) /System/Library/SystemConfiguration/EAPOLController.bundle/EAPOLController
0xdf000 - 0xeafff com.apple.SystemConfiguration.IP6Configuration 1.1.1 (0.0.1d1) /System/Library/SystemConfiguration/IP6Configuration.bundle/Contents/MacOS/IP6C onfiguration
0x205000 - 0x220fff com.apple.SystemConfiguration.IPConfiguration 8.0.2 (???) /System/Library/SystemConfiguration/IPConfiguration.bundle/IPConfiguration
0x22a000 - 0x237fff com.apple.SystemConfiguration.PPPController 1.4.2 /System/Library/SystemConfiguration/PPPController.bundle/Contents/MacOS/PPPCont roller
0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x90172fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c2000 - 0x901c4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x9080c000 - 0x908d4fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x90914000 - 0x90a07fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a57000 - 0x90ad6fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90aff000 - 0x90b63fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90bde000 - 0x90c51fff com.apple.framework.IOKit 1.4.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c66000 - 0x90c78fff libauto.dylib /usr/lib/libauto.dylib
0x91150000 - 0x9115efff libz.1.dylib /usr/lib/libz.1.dylib
0x91161000 - 0x91300fff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x9140d000 - 0x91433fff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x92b06000 - 0x92b10fff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
Finally. This is what happens when everything goes ok (after removing all networks after wakeup):
Mar 30 10:32:07 macbook sudo: lindkvis : TTY=ttyp2 ; PWD=/Users/lindkvis/Projects/Bubbles/src ; USER=root ; COMMAND=/bin/cat /var/log/system.log
Mar 30 10:32:07 macbook launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[4784]: exited abnormally: Hangup
Mar 30 10:32:07 macbook configd[4783]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Mar 30 10:32:07 macbook configd[4783]: posting notification com.apple.system.config.network_change
Mar 30 10:32:07 macbook lookupd[4795]: lookupd (version 369.6) starting - Fri Mar 30 10:32:07 2007
Mar 30 10:32:07 macbook configd[4783]: target=enable-network: disabled
Mar 30 10:32:12 macbook sudo: lindkvis : TTY=ttyp2 ; PWD=/Users/lindkvis/Projects/Bubbles/src ; USER=root ; COMMAND=/bin/cat /var/log/system.log
Macbook White 13" 1.83GHz 1GB Mac OS X (10.4.8) RSS fixed under warranty, SMC 1.4f12So I get the same problems with a D-link DGL-4300,
after every sleep I need to reset the router to get
thw wireless working again. I really need a solution
for this.
For me, resetting the router does not work, only removing network from Airport preferences and re-adding it. Have you confirmed that this is indeed the same issue by looking what gets printed to /var/log/system.log?
To show the output, do the following from the terminal
sudo cat /var/log/system.log
This prints the contents of the log-file to the terminal window. -
Is there a patch to help Dreamweaver work without problems in vista?
Please let me know if there is a patch I can download to make
Dreamweaver compatible with Vista. The problems are numerous and
are driving me nuts at the moment. Can you upgrade to DW CS3 from
the website?
Nick.There are many of us who are running DW without problems in
Vista. What
problems are you having? Which versions of Vista and DW are
you running?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Megisti" <[email protected]> wrote in
message
news:evf3v1$1nj$[email protected]..
> Please let me know if there is a patch I can download to
make Dreamweaver
> compatible with Vista. The problems are numerous and are
driving me nuts
> at the
> moment. Can you upgrade to DW CS3 from the website?
>
> Nick.
>
>
Maybe you are looking for
-
My ipad2 is non responsive to touch. I have updated the software using ITunes and have restored the device to factory setting and it still does not resonse. Has anyone had this problem? What do you suggest?
-
I have created a few books using iPhoto (stored under Keepsakes). I have an external hard drive that backs up my files (using time-machine), but I would like to separately save electronic copies of these books. Is that easy to do? Thanks much.
-
HT5454 What does this do for me as a LAPTOP user?
What does Apple Deskttop Client 3.6.1 do for me as a Macbook Pro OS X 10.7.5 user?
-
Hi, I have a problem opening an Excel spreadsheet by a LabVIEW application that is using Runtime Engine 7.0 in a Windows 98 OS environment . I tried LabVIEW 7.1, it will not install on Win98. Meanwhile, I installed Excel 97 and 2000 (Excel 2003 does
-
Hi, Is there's any FM or BAPI to return the County Code associated with County Name? Thzs for the help regards Jaime Cordeiro