BEFW11S4 will not connect two computers at once.

I have a new set of cables. When I hard wire two computers to router only one or the other will connect.
Thanks for any suggestions.

As gv has already requested, please post the output of "ipconfig /all" on each of the two computers.
In particular, do not -- repeat do NOT -- try to make both computers have the same IP address, because that is a situation in which both will NOT be able to connect to the internet at the same time. They need different -- repeat DIFFERENT -- IP addresses in order to do so.
Message Edited by arayq2 on 10-18-2008 08:32 AM

Similar Messages

Can not connect two computers to net at same time

I have a desktop and laptop connected to router. I can only have one on the net at a time. If one is one and I try to connect the other it will disconect or say busy. Any suggestions?

Make sure your modem is connected to the "Internet" port on the router, not one of the numbered ports.
Are you using any fixed LAN IP addresses? If so, list the addresses that you use and also list your DHCP server range.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D.

BEFW11S4 Problems - Says connected but will not connect to Internet

Hello, everyone, I have one desktop hooked up to a BEFW11S$ router. I also have another desktop and a notebook running off of it. The main one, as well as the other desktop work perfectly fine, while the other desktop is just a bit on the slow side, but the laptop, which says it is connected will not connect to any form of internet, whether it be IE or MSN. I'm not sure, but I think the connection between the computers needs re-establishing. Though I have no idea how to go about doing this... Any help? T.T
Message Edited by ravens6938 on 01-02-200702:23 PM

Hi… I would suggest you to delete preferred wireless networks on your wireless laptop, and then try to reconnect to the wireless network. Also check what ip address you are getting, is it a valid ip address from the router. Try deleting cookies in internet explorer. Then check the connection. You cannot change anything on the router because other two computers are working fine.

My 5yr old iMac will not connect to the Internet. All other computers in the house will, including my Mac pro and iPad. What should I do?

My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?

Which OS are you using (update your user profile).Try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport

ITunes will not connect to the iTunes store once again

Okay so last year when I updated my iTunes I could not connect to the store. I eventually got it to work. Well I went to update my itunes again to update my iphone and once again after itunes installed it will not connect to the store so I cannot update my iphone. I have deleted it and added it again in both norton and windows firewall and it still will not work. Any help would be great as this is a real pain.
Thanks
Here is the output when I run diag.
Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
LENOVO 0768A78
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.1.3
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 7D8A8483B8B9A46A
Current user is not an administrator.
The current local date and time is 2009-07-05 22:10:14.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 945 Express Chipset Family
Intel Corporation, Mobile Intel(R) 945 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {EA374AA4-C2F2-4B22-8CF0-2DE8DCB49783}
Description: Broadcom 802.11g Network Adapter
IP Address:
Subnet Mask:
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Sun Jul 05 20:58:03 2009
Lease Expires: Mon Jul 06 20:58:03 2009
DNS Servers:
Adapter Name: {8246CDCC-66C9-4BAD-B147-7C842940147A}
Description: Realtek RTL8139/810x Family Fast Ethernet NIC
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2009-06-20 21:52:34.

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?

This is a user to user technical support forum. It is not our responsibility to convince you of anything.
Do you actually have a technical support question? If not, post your question on a blog or somewhere more appropriate.
Best,
GDG

I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

I just bought a used i book g3 it will not connect to my wifi network, I bought two of them actually one is a g4 other g3, the g4 connects fine, but the g3 not so much. If anyone would have the answer on how to fix it or run a test on it.

Make sure your network has 802.11b activated. The G3 only supports the "B" wireless networking protocol. Modern networking is "G".

TS1398 when i connect to my two home wifi's which i have done forever my iPad will not connect to the internet or let me get mail. Any suggestionswi?

When I connect to my two home wifi's which I have done forever my iPad will not connect to the internet ot let me get mail. Any suggestions?

When I connect to my two home wifi's which I have done forever my iPad will not connect to the internet ot let me get mail. Any suggestions?

TS1398 Have 3 iPods and 3 iPads in our house. Our Internet is dlink. Two iPods and one iPad will not connect. Help?

We have 3 iPods and 3 iPads in our house. To of the iPods and one of the iPads will not connect to the Internet. Our Internet is dlink. Can anyone help?

Do the devices connect to other networks?
Do they see the network?
Any error messages?
Do other devices now connect?
Did they connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My IPhone will not connect to multiple computers

I got an IPhone last October and a new computer for Christmas. I downloaded all my songs to the other computer and have mostly been using it. My IPhone will no longer connect to my home computer. I need to remove pictures from my IPhone that I added to it from the home computer. I cannot take them off on the new computer and it will not connect to the original one. Can I fix this problem without restoring my phone?

Try syncing some photos to your phone from your new computer by selecting Sync Photos on the Photos tab of your iTunes sync settings. I believe you will get a warning that existing photos will be deleted (which is what I believe you are trying to do).

HP C4740 will not connect wirelessly to HP desktop

I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3. I have 2 MB RAM. I purchased an HP C4740 AIO printer about 6 months ago. At first it hooked up fine and performed very well in wireless mode. Then when replacing an ink cartridge one of the retainer tabs broke. Long story short I had to replace the unit. HP gladly did so and I got a brand new one.
When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer. Unfortunately, no matter what I do it will not connect to my wireless network. The only way to use this printer is via USB cable. Two things happen that I find interesting: it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network). Even when I try to manually enter my network SSID and Passphrase it will not recognize it. I have also tried unsecuring the network but still no success.
The network is secured but I have the SSID and passphrase information. For reference, I have a Dell laptop and Lexmark printer that connect without issue. My iPhone 4 connects without issue. This C4740 will not. I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer. Still nothing works in wireless mode.
Need help. I am by no means a computer expert, especially with networking. I know enough to be dangerous but still make it through the day! I'm ready to toss this and pay the much higher price for the much more usable Lexmark! Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
Thanks!

Hi,
Download the latest installer software for your printer on the link below and save it to the Desktop.
ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
Next download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo and use it to uninstall your printer software. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Temporarily disable any security software ( Antivirus and Antispyware )
Now try running the software installer from your Desktop by double clicking the installer. Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ). If everything install Ok, remember to enable your security software.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My airport extreme will not connect to the Internet

My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.

I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme. The really funny thing is that I can set up a network between the two and it works fine. I am using it at work now with out any problems so I guess there is really no loss :-?

Ipod 5G 60 GB will not connect to itunes or Disk Utility.

Mac OS X 10.6.8 and latest itunes. Ipod charges but will not connect. Tried the 5 R's ect. I'm pretty ipod/phone and apple savyy and I'm stuck. Tried multiple computers/cables/ports ect. Don't mind reformatting and starting over.
Thoughts? I hear this is pretty common and can't find one legit answer on the entire internet which I find strange. Is there nothing I can do at this point besides taking it to apple?
Thanks!

You have to restore from recovery mode by following the steps in http://support.apple.com/kb/HT1212 and may need to do that more than once.

BEFW11S4 will not connect two computers at once.

Similar Messages

Maybe you are looking for