BEGDA & ENDDA missing in InfoPackage selection

Hi All,
within my 0EMPLOYEE_ATTR extractor, the infopackage does not contain the BEGDA & ENDDA fields. they are definately ticked for 'selection' within RSA6. I have done replication and all other fields seem to be there besides these 2. Any ideas how i can get them to appear on infopackage for selection?
Thanks in advance.
Munaf.

Hi Munaf,
I believe that SAP note 310304 explains the problem, to extract time dependent master data you must
use the fields 'DATETO' and 'DATEFROM'. You can't use BEGDA and ENDDA.
Please read the "solution" part of the note 310304 it explains what you need to do.
Best Regards,
Des Gallagher

Similar Messages

The fields of type Int 1 not appearing in Infopackage selection

Hello Gurus,
I have created a generic datasource on two tables .
The fields that should be set as Selection fields for the DataSource are the following:
-     field 1------type char
-     field 2----
type char
-               field 3----
type Int1
-     field 4----
type Int1
Out of the above four table fields only the two fields with char datatype are appearing in infopackage selection.
The other two ie(field 3 and field 4) of datatype Int1 does not appear in infopackage selection.
I have ticked the check boxes in the selection field of datasource.
I also get all the four fields available for selection in RSA3(extractor checker tcode).
Kindly help me in resolving this issue.

Hi Amol,
Can you please replicate DS once again and then try creating the infopacage
Mann

*** Abap Routine in Infopackage selection ***

Hi !!!
I have the scenario below:
I have created an infoobject called CAEMPFF. In the infopackage selection under field 0COMP_CODE I want to create an abap rotine to read all vaules filled in CAEMPFF.
How can I do that using abap routine ?
Thanks in advance,
Leandro.

Hi Leandro,
In the infopackage, under 0comp_code (or probably field BUKRS if it's an ERP datasource), you should select ABAP routine (6) under Type field. Then, you'll be prompted to create the routine.
There you should create a program that reads all the values of your infoobject master data table.
Hope this helps.
Regards,
Diego

Infopackage Selections Tab-OLAP Variable/ABAP Routine

Hi Experts
In my Infopackage Selections Tab i had Cal Mon/Year field....
As per my requirment i have to write a selection condion that when we execute info package (it is a monthly data load) it will extract data only for the months greater than or equal to current month
Please update me on how can i achieve this either by using OLAP Variable or ABAP Routine in infopackage...will be great if can provide the required ABAP Code
Thanks in Advance

here's an example that fills the fiscal year from last month (bold is customer code... the rest is standard):
data: l_idx like sy-tabix.
read table l_t_range with key
       fieldname = 'PARAM_P_GJAHR'.
l_idx = sy-tabix.
data:
v_caldy type /BI0/OICALDAY,
v_calmn type /BI0/OICALMONTH,
v_calyr type /BI0/OICALYEAR.
v_caldy = sy-datum.
determine first day*
v_caldy+6(2) = '01'.
determine last month*
subtract 1 from v_caldy.
v_calyr = v_caldy(4).
l_t_range-sign   = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low    = v_calyr.
modify l_t_range index l_idx.
p_subrc = 0.

OLAP Variable with user exit for Infopackage Selection 0fiscper

Hi Frds/ Guru's ,
I have a requirement to use a OLAP Variable for Fiscal year period 0fiscper(Characteristic ) in the Infopackage Selection. . I need to extract the data for Previous Year and Current Year , that is to be automatically selected with a OLAP Variable . The standard one's provided by SAP are not satisfying my requirement,as they are getting populated with SAP Exit and I am not getting the ranges .I am planning to create a variable and use the processing type as Customer Exit and Populate it with ABAP code in respective Enhancement RSR00001.
Even Can I create a ABAP Routine ? Please suggest me which is better to do in respect to performance of dataload , will be really glad if anyone can provide some code for doing this as u might have faced the situation sometime .
I have checked with all the threads available , could get some idea but will be really thankful if u gimme some hints in writing the code , at Exit level and routine level .
Thanks,
Krish

thnx

InfoPackage selection offset with OLAP variable

Hi Bw Gurus,
I have a requirement to load ODS with full upload everytime but in order to reduce repeated loads I am trying to use a DATE field which is not part of communication str. as a selection critera in InfoPacakge.
I changed DS to include this field avaialable for selection and It's working fine when I input date to and from values hard coded in InfoPackage.
Further I am trying to automate this InfoPackage scheduled weekly and I need to include date offset value for this DATE field to load for additional last 2 weeks every time to capture changes for already loaded data.
I have created OLAP customer exit variable having Date interval for Date starting from last 3 weeks to Current DAte and included in InfoPackage selection for DATE field but it's not working. By the way if someone can explain what's meaning for two columns there for TYPE(Variable change to selection.....) and detail for type.
Any clue for reason or any other way to accomplish this requirement?
Thanks in advance,

hi,
can you explain me ,hw you solved the pbm,
the same pbm i am facing.
i am trying to load the data everyweek ( i have date field ),so i have selected OLAP Variable option -7 and there i have selected 0WEEK,but data is not comining from R/3,then i have selected the option -6 abap code,i have written code to get the date range,even though i am not able to retrive the data.
can you suggest me
Thanks
Madhu

Routine in Infopackage selection

Hi,
We are using DB Connect and hence we need to write a routine in Infopackage selections to restrict the data to be extracted.
In the source file, there is a field called " Time stamp".
This is a Char 23 field with mm-dd-yyyy-hh.mm.ss.sssss format.
My requirement is lookinto first 10 char ( only for date) and filter the records. If the date = Sy-datum, then only, i want to extract the data in BI staging.
Is it possible to write a routine in Infopackage ? Can you pls help me ?
Or do i need to take the whole data into PSA and then write a routine in transformation while uploading to Data Target ?
Regds,
BW Small

Hi,
See the below code for Including 0FISCPER dynamically, so in that way you can write code to get your selection or change the data formate etc.., show this code to ABAPer ask according to this code implement your logic.
In below code I'm calculating 0FISCPER based on Sy-Datum using FM.
program conversion_routine.
* Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rssdlrange.
* Global code used by conversion rules
*$*$ begin of global - insert your declaration only below this line *-*
* TABLES: ...
* DATA: ...
*$*$ end of global - insert your declaration only before this line *-*
* InfoObject = 0FISCPER
* Fieldname = FISCPER
* data type = NUMC
* length = 000009
* convexit = PERI7
form compute_FISCPER
tables l_t_range structure rssdlrange
using p_infopackage type rslogdpid
 p_fieldname type rsfnm
changing p_subrc like sy-subrc.
* Insert source code to current selection field
*$*$ begin of routine - insert your code only below this line *-*
DATA: l_idx LIKE sy-tabix,
 zzdate LIKE sy-datum,
 zzbuper LIKE t009b-poper,
 zzbdatj LIKE t009b-bdatj,
 zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
 fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
 EXPORTING
 i_date = zzdate
* I_MONMIT = 00
 i_periv = 'V3'
 IMPORTING
 e_buper = zzbuper
 e_gjahr = zzbdatj.
* EXCEPTIONS
* INPUT_FALSE = 1
* T009_NOTFOUND = 2
* T009B_NOTFOUND = 3
* OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
p_subrc = 0.
*$*$ end of routine - insert your code only before this line *-*
endform.
Thanks
Reddy

" To Value " is greyed out in Infopackage Selection Tab ??????

Infopackage Selection Tab has some mandatory selections to be fild in for loading.
"From value" is excepting values but "To Value" is greyed out ???
Its for a SAP extractor - FERC.
Help SDNer's

I see the Doc :
Text
Selection Options
Definition
Selection options that can be processed for a DataSource field.
Note 1:
The selection options defined here must be supported by the extractor.
Note 2:
If no other selection options are used for a DataSource field other than
'EQ' and 'BT', no further definition is required. The value of the
selection options can remain as the the default setting '0'.
The selection option combinations are encoded into a binary string using the following schema and are saved as decimal figures:
Selection option exponent (binary string)
EQ 2^0
BT 2^1
CP 2^2
GT 2^3
GE 2^4
LT 2^5
LE 2^6
NE 2^7
NB 2^8
NP 2^9
Each character in the resulting binary string describes whether the corresponding selection option is allowed or not.
That is:

1-allowed
0-not allowed
For example:
Selection options EQ and CP can be used to select in a field.
The binary string is then: 0000000101
The corresponding decimal value that sis saved as the DataSource definition is: 12^0 + 12^2 = 5

All the selections have 1 which is allowed but why To value is greyed out ?

InfoPackage Selection - Logical OR

Is there any way to enable a Logical 'OR' in an InfoPackage on 2 fields? When both fields are populated by respective ABAP routines, the result condition turns out a Logical 'AND'.
I have two timestamp fields, in InfoPackage Selection TS1 and TS2 intervals. I have routines on both of them. How can I enable the system to generate my selection to be an OR meaning either TS1 interval OR TS2 interval. The way it is behaving now is TS1 interval and TS2 interval.
I am using BW 7.1 and DB Connect interface in this case.
Thanks.

I don't need this anymore but if anyone has ideas, please feel free to chime in as it can benefit the community.

ABAP routine at Infopackage selection options

Dear all,
I need to write ABAP Routine at InfoPackage Selection Options.
Requirement is to bring only the versions (contains 2 characters) starting with 'C'.
Ex. I need versions CR, CP...
Code template is the following:
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'VERSB'.
l_idx = sy-tabix.
modify l_t_range index l_idx.
p_subrc = 0.
Can anybody help me to resolve this?
Regards

Hi,
here is an example:
DATA: string(40) TYPE c.
CONCATENATE 'C' '%' INTO string.
SELECT *
FROM /bi0/hwbs_elemt
INTO TABLE lt_hwbs_elemt
WHERE nodename LIKE string.
Best regards,
Frank

INIT InfoPackage Selections

Hello,
In an INIT Infopackage I want to make the following selections for extraction:
Sales Org = 0003 through 0004
Sales Org = Not Assigned (Blank)
With these selections my goal is to get records for Sales Org 0003 and 0004 as well as the records that are not assigned to a Sales Org. Specifically I am trying to avoid getting records for Sales Org 0005, but I want to make sure and get the records that have an unnassigned Sales Org.
Is this possible? I am mostly unsure of how to indicate in my selection criteria that "if the sales Org is unassigned then bring over the record".
We are on BW 3.5
Thanks,
Nick
Message was edited by:
Nick Bertz

Hello Jr. Roberto,
Thanks for your reponse, I have some follow up questions.
What sort of routine are you suggesting?
Also what do you mean by F2 won't work in InfoPackage Selections? What is F2?
Thanks,
Nick
Message was edited by:
Nick Bertz

Technical Design Review Question: InfoPackage Selection

I got my hands on technical design documentation for a project on COPA budget. I came up with a few questions but I will post them separately for fast closing and awards:
1. In the discussions of InfoPackage Selection, a statement
The budgets InfoSource will have full/Replace loads, based on plan version
Can you explain what this statement may mean? I am not sure I get it right.
Thanks.

Hi Caud !
I think that thi statement refers to the possibility to delete the content of an infoprovider for the same selection criteria...so, in this case, you have to load budget data on the basis of the plan version and delete (replace) the already existing data for the same plan version loaded before !
Hope it helps!
Bye,
Roberto
http://help.sap.com/saphelp_nw04/helpdata/en/f8/e5603801be792de10000009b38f842/content.htm

Hierarchy selection tab missing in infopackage

Hi Experts,
i am looking how to load multiple hierarchies to Bi so inorder to know available hierarchies from OLTP in hierarchy selection tab in infopackage which was not available at all. i had only data selection tab.i am using version Bi 7.0
how can i found hierarchy selection tab in infopackage
Regards,
narasimha.

Hierarchy loading is the same for info object which is created under the info object itself.
loading is uploading the data to the hierarchy, creating hierarchy is you will be maintaing the structure of the hierarchy under that info object
Are you sure you have Hierarchy maintained for your info object?
If the hierarchies are maintained you will find the Bell type symbol under the info objects in info providers tab.
As told by mti - drill down till you find the data source --right click on it and select create info package - here you can find the tab hierarchy selection tab (which is the second tab in that screen).
Check the below link to know more abt hierarchies
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm

Begda and endda missing

Dear experts,
I'm making HR reports and noticed that i could only retrieve data from the current month and year. I did some problemsearching and discovered that my begda and endda infotypes aren't present in my HeadCount and Personnel Actions cube in BW.
My question to you:
Is there a way i can still access these infotypes for my query?
or do i need to remake my cube?(if so, how?)

Hi,
Thanks Atish...
I'm creating a custom infotype which has to be populated from more than one infotype..
So in that dynamic action i've to check the values of begda and endda in a module... for that i don't want to include the structures of all the infotypes from which the custom infotype is going to be populated.
I want to fetch the values of begda and endda from some other table..
Got it my friend?

Number of Lines limited in InfoPackage Selection?

Hello Experts!
I have 2 InfoPackage in order to load Data from ODS1 into ODS2. Selection is made for customer number - exact criteria is made via Abap Routine in InfoPackage. (InfoPackage 1 has all customers meeting a certain criteria - InfoPackage 2 has all the ranges in between the customer Numvers of InfoPackage 1).
Therefore the load of both InfoPackages should load all data - but the problem is, I only get a small part of the Data. In ODS 1 there are some 2.800.000 entries and in ODS2 the load of the 2 InfoPackages only select about 30.000 entries.
Since the selection criteria in monitoring seem fine - do you have any idea where the problem comes from? Is there a max. number of lines for selection to be made in infoPackage?
Thanks for your help!
Angelika

Hi Angelika,
check out the monitor --> in the request tree check the numbers coming into the update rules an coming out of the update rules, may be you are loosing some records there. The only thing that I know about the size of selections is that you will get a dump if you have to many entries in a select-option table (and having those lines in a infopackage is nothing else).
Another reason might be a missing alpha conversion of the entries in the infopackage.
kind regards
Siggi

BEGDA & ENDDA missing in InfoPackage selection

Similar Messages

Maybe you are looking for