Begginer needing help with "package" word

Hi,
I'm a Java newbie and I'm trying to get comfortable with programming in Java on my Mac (running Mac OS 10.3).
I found some sample code that I'm testing out at:
http://www.macdevcenter.com/pub/a/mac/2001/08/03/osx_java.html?page=1
but I'm having problems using the reserved word "package".
at the time of each .java file the sample code has:
package NineSquares;When I compile this in the Terminal window using the command
javac NineSquares.java
javac MainFrame.java
javac EachSquare.javaI get the following error message:
NineSquares.java:8: cannot resolve symbol
symbol : class MainFrame
location: class NineSquares.NineSquares
new MainFrame();
^
1 error
David-Salvays-Computer:~/introcs/Project2 davidsalvay$
when I comment out the package line it compiles fine.
I don't understand what package means and how I use it. BTW, all my .java files are in the same folder and I've already set the classpath to the file containing my main method (NineSquares.java).
Any help/suggestions/ideas will be much appreciated!
--David

1. package is always declared first in a class definition.
2. If you've got a class foobar, and that class is in package x.y.z, then the .class file needs to be in a file foobar.class under the directory hierarchy x\y\z\foobar.class, and where the directory above x is in the classpath.
3. The official name of that class is x.y.z.foobar. You can import it using import x.y.z.*; or import x.y.z.foobar; Import just lets you use the class without having to always write x.y.z

Similar Messages

Need help with package update

have a package that was sequenced for w7 64 bit;
now need to publish this package to RDS 2012.
edited the package in sequencer and added RDS2012 R2.
The question:
do I have to unpublish current package that is for W7 only and publish edited one with added RDS 2012 or can I update running with changed. Never did update yet. So please don't be angry :)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

If you just changed the supported OS value (checkbox during sequencing), just saving the package on the sequencer and importing it into the management console should be fine.
The MgtConsole will determine that you are importing an updated version and will ask you if you want to import it 'as an update'. You can confirm that.
On a client machine, the old version of the package will remain (for a while) and the new version will be added. Users that actively work with the old version, stick on that on. Users that launch the application will get the new version.
If your two 'packages' really have technical differnces, the 'save as new package' is appropriate with the considerations mentioned earlier
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Need help with Microsoft Word 2008 for Mac

When I paste a picture in a word document and save it, it seems to show up without a problem. But when I go back in to edit or print the document, the picture is no longer there, only a box with a big red X in it (I've inserted a sample of what shows up). Does anyone know how to fix this problem? Thanks!

Thanks for the suggestions, AussieDJ, but unfortunately I don't have a clue under what format to save a document other than as a word document. If anyone out there has encountered this problem with Word 08 and has some suggestions to resolve the issue, I'd sure appreciate hearing from you! Thanks!

Begginer needs help with what version of Photoshop?

Let me clarify.....
Back in 2008, I bought an E-Machine Desktop that had "Adobe Photoshop" bundled on it.
I bought a new HP 6719C computer last year.
It has no Photoishop program whatsoever.
I LOVED my old version of Photoshop.
The feature I liked most was the erasing Tool, were you could put your head on someone elses boday, and the "Clone" feature, to take out unwanted items in your pictures.e to Download a version of Adobe Photoshop, that closely resembles the Features I described above.
Not looking for anything, super-dooper fancy.
Just pretty much the Basics.
So what is this "Adobe Elements" program all about.
What would be the simpelest, least complicated program, to get me started after a 5 year Hiatus without Adobe Photoshop?
Roger

Photoshop Elements 10 should do what you need.
You could download a thirty day trial and see if it does what you need.
There is also the photoshop elements forum for more in depth questions about photoshop elements features:
http://forums.adobe.com/community/photoshop_elements

Need help with codings on generating random words

hi guys.. i need help with generating random words from a list of array. please help me with the codings.. let me know the other variables that are needed if required as well.. thanks a million..
private String wordList[] = { "abstraction", "command", "arithmetic", "backslash" };

Hi,
You can use the Random class to generate Random number between 0 to the array length and use the generated random number as index in to the Strign array.
To generate Random number use the following code
Random r = new Random();
num = ((r.nextInt() >>> 1) % wordList.length);
num will have the randomly generated number.

Need help with conditional query

guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
    "FGL_GRNT_CODE" VARCHAR2(60),
    "FGL_FUND_CODE" VARCHAR2(60),
    "FGL_ACCT_CODE" VARCHAR2(60),
    "FGL_ORGN_CODE" VARCHAR2(60),
    "FGL_PROG_CODE" VARCHAR2(60),
    "FGL_GRNT_YEAR" VARCHAR2(60),
    "FGL_PERIOD"    VARCHAR2(60),
    "FGL_BUDGET"    VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH     got_greatest_year     AS
     SELECT     fgl.*     -- or whatever columns are needed
     ,     MAX ( CASE
                 WHEN fgl_period = :given_period
                 THEN fgl_grnt_year
                END
              ) OVER ()     AS greatest_year
     FROM     fgl
SELECT     SUM (fgl_budget)     AS total_budget     -- or SELECT *
FROM     got_greatest_year
WHERE     (     fgl_grnt_year     = greatest_year
     AND     fgl_period     = :given_period
OR     (     fgl_grnt_year     = greatest_year - 1
     AND     fgl_period     = 14
;Miguel

Hi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH     got_greatest_year     AS
     SELECT       TO_NUMBER (fgl_grnt_year)     AS grnt_year
     ,       fgl_period
     ,       TO_NUMBER (fgl_budget)     AS budget
     ,       MAX ( CASE
                   WHEN fgl_period = :given_period
                   THEN TO_NUMBER (fgl_grnt_year)
                  END
                ) OVER ()     AS greatest_year
     FROM       fgl
,     got_cnt_00     AS
     SELECT     grnt_year
     ,     fgl_period
     ,     budget
     ,     greatest_year
     ,     COUNT ( CASE
                   WHEN grnt_year     = greatest_year
                   AND       fgl_period     = '00'
                   THEN 1
                     END
                ) OVER ()          AS cnt_00
     FROM    got_greatest_year
SELECT       SUM ( CASE
                    WHEN grnt_year     = greatest_year                    -- New
              AND       fgl_period     = :given_period                    -- New
              AND       cnt_00     > 0            THEN budget * 2     -- New
                    WHEN grnt_year     = greatest_year
              AND       fgl_period     = :given_period       THEN budget
                    WHEN grnt_year     = greatest_year
              AND       fgl_period     = '00'            THEN -budget
                    WHEN grnt_year     = greatest_year - 1
              AND       fgl_period     = '14'
              AND       cnt_00     = 0            THEN budget
                END
           )          AS total_budget
FROM       got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New".

Need Help With File Matching Records

I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
    try
      output1 = new Formatter("trans.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
    try
      output2 = new Formatter("oldmast.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
    // object to be written to file
    TransactionRecord record1 = new TransactionRecord();
    Scanner input1 = new Scanner(System.in);
    System.out.printf("%s\n%s\n%s\n%s\n\n",
      "To terminate input, type the end-of-file indicator",
      "when you are prompted to enter input.",
      "On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
      "On Windows type <ctrl> z then press Enter");
    System.out.printf("%s\n%s",
       "Enter account number (> 0) and amount.","? ");
    while (input1.hasNext()) // loop until end-of-file indicator
      try // output values to file
        // retrieve data to be output
        record1.setAccount(input1.nextInt());    // read account number
        record1.setAmount(input1.nextDouble()); // read amount
        if (record1.getAccount() > 0)
          // write new record
          output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
        } // end if
        else
          System.out.println("Account number must be greater than 0.");
        } // end else
      } // end try
      catch (FormatterClosedException formatterClosedException)
        System.err.println("Error writing to file.");
        return;
      } // end catch
      catch (NoSuchElementException elementException)
        System.err.println("Invalid input. Please try again.");
        input1.nextLine(); // discard input so user can try again
      } // end catch
      System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
        "and amount.","? ");
    } // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
    // object to be written to file
    AccountRecord record2 = new AccountRecord();
    Scanner input2 = new Scanner(System.in);
    System.out.printf("%s\n%s\n%s\n%s\n\n",
      "To terminate input, type the end-of-file indicator",
      "when you are prompted to enter input.",
      "On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
      "On Windows type <ctrl> z then press Enter");
    System.out.printf("%s\n%s",
       "Enter account number (> 0), first name, last name and balance.","? ");
    while (input2.hasNext()) // loop until end-of-file indicator
      try // output values to file
        // retrieve data to be output
        record2.setAccount(input2.nextInt());    // read account number
        record2.setFirstName(input2.next());      // read first name
        record2.setLastName(input2.next());       // read last name
        record2.setBalance(input2.nextDouble()); // read balance
        if (record2.getAccount() > 0)
          // write new record
          output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
            record2.getLastName(), record2.getBalance());
        } // end if
        else
          System.out.println("Account number must be greater than 0.");
        } // end else
      } // end try
      catch (FormatterClosedException formatterClosedException)
        System.err.println("Error writing to file.");
        return;
      } // end catch
      catch (NoSuchElementException elementException)
        System.err.println("Invalid input. Please try again.");
        input2.nextLine(); // discard input so user can try again
      } // end catch
      System.out.printf("%s %s\n%s", "Enter account number (> 0),",
        "first name, last name and balance.","? ");
    } // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
    if (output1 != null)
      output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
    if (output2 != null)
      output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
   // main method begins program execution
   public static void main( String args[] )
     CreateTextFile application = new CreateTextFile();
     application.openTransFile();
     application.addTransactionRecords();
     application.closeTransFile();
     application.openOldMastFile();
     application.addAccountRecords();
     application.closeOldMastFile();
   } // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
    this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
    setAccount(acct);
    setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
    account = acct;
} // end method setAccount
// get account number
public int getAccount()
    return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
    amount = amt;
} // end method setAmount
// get amount
public double getAmount()
    return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
    this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
    setAccount(acct);
    setFirstName(first);
    setLastName(last);
    setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
    account = acct;
} // end method setAccount
// get account number
public int getAccount()
    return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
    firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
    return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
    lastName = last;
} // end method setLastName
// get last name
public String getLastName()
    return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
    balance = bal;
} // end method setBalance
// get balance
public double getBalance()
    return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
    balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
    try
      inTransaction = new Scanner(new File("trans.txt"));
    } // end try
    catch (FileNotFoundException fileNotFoundException)
      System.err.println("Error opening file.");
      System.exit(1);
    } // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
    try
      inOldMaster = new Scanner(new File("oldmast.txt"));
    } // end try
    catch (FileNotFoundException fileNotFoundException)
      System.err.println("Error opening file.");
      System.exit(1);
    } // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
    try
      outNewMaster = new Formatter("newmast.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
    try
      theLog = new Formatter("log.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
    TransactionRecord transaction = new TransactionRecord();
    AccountRecord account = new AccountRecord();
    try // read records from file using Scanner object
      System.out.println("Start file matching.");
      while (inTransaction.hasNext() && inOldMaster.hasNext())
        transaction.setAccount(inTransaction.nextInt());     // read account number
        transaction.setAmount(inTransaction.nextDouble());   // read amount
        account.setAccount(inOldMaster.nextInt());     // read account number
        account.setFirstName(inOldMaster.next());      // read first name
        account.setLastName(inOldMaster.next());       // read last name
        account.setBalance(inOldMaster.nextDouble()); // read balance
        if (transaction.getAccount() == account.getAccount())
          while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
            account.combine(transaction);
            outNewMaster.format("%d %s %s %.2f\n",
            account.getAccount(), account.getFirstName(), account.getLastName(),
            account.getBalance());
            transaction.setAccount(inTransaction.nextInt());     // read account number
            transaction.setAmount(inTransaction.nextDouble());   // read amount
        else if (transaction.getAccount() != account.getAccount())
          outNewMaster.format("%d %s %s %.2f\n",
          account.getAccount(), account.getFirstName(), account.getLastName(),
          account.getBalance());
          theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
      } // end while
      System.out.println("Finish file matching.");
    } // end try
    catch (NoSuchElementException elementException)
      System.err.println("File improperly formed.");
      inTransaction.close();
      inOldMaster.close();
      System.exit(1);
    } // end catch
    catch (IllegalStateException stateException)
      System.err.println("Error reading from file.");
      System.exit(1);
    } // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
    if (inTransaction != null)
      inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
    if (inOldMaster != null)
      inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
    if (outNewMaster != null)
      outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
    if (theLog != null)
      theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
   // main method begins program execution
   public static void main( String args[] )
     FileMatch application = new FileMatch();
     application.openTransFile();
     application.openOldMastFile();
     application.openNewMastFile();
     application.openLogFile();
     application.updateRecords();
     application.closeLogFile();
     application.closeNewMastFile();
     application.closeOldMastFile();
     application.closeTransFile();
   } // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number            Name                     Balance
100                            Alan Jones                   348.17
300                            Mary Smith                    27.19
500                            Sam Sharp                   0.00
700                            Suzy Green                   -14.22Sample data for transaction file:
Transaction file                    Transaction
Account Number                  Amount
100                                         27.14
300                                         62.11
300                                         83.89
400                                         100.56
700                                         80.78
700                                         1.53
900                                         82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.

From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do.

I need Help with a website I've created

I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>The Lighthouse Church</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv12 {
    position:absolute;
    width:295px;
    height:23px;
    z-index:4;
    left: 198px;
    top: 1px;
#apDiv13 {
    position:absolute;
    width:135px;
    height:22px;
    z-index:5;
    left: 1001px;
    top: 3px;
#apDiv14 {
    position:absolute;
    width:309px;
    height:992px;
    z-index:1;
    left: 33px;
    top: 479px;
#apDiv15 {
    position:absolute;
    width:327px;
    height:999px;
    z-index:1;
    left: 324px;
#apDiv16 {
    position:absolute;
    width:262px;
    height:1000px;
    z-index:2;
    left: 674px;
    top: 477px;
#apDiv17 {
    position:absolute;
    width:85px;
    height:34px;
    z-index:1;
    left: -379px;
    top: 1001px;
#apDiv18 {
    position:absolute;
    width:200px;
    height:115px;
    z-index:6;
#apDiv19 {
    position:absolute;
    width:168px;
    height:31px;
    z-index:3;
    left: 448px;
    top: 1451px;
#apDiv20 {
    position:absolute;
    width:94px;
    height:33px;
    z-index:3;
    left: 384px;
    top: 1477px;
body {
    background-color: #000;
    margin-left: 0px;
    margin-right: 0px;
#apDiv21 {
    position:absolute;
    width:920px;
    height:200px;
    z-index:4;
    left: 19px;
    top: 233px;
</style>
</head>
<body>
<div class="container">
<div class="content">
    <div id="apDiv5">
      <div id="apDiv16">
        <div id="apDiv17">
          <map name="Map2" id="Map2">
            <area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
          </map>
          <img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
          <map name="Map" id="Map">
            <area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
          </map>
        </div>
      </div>
      <div id="apDiv21">
        <blockquote>
          <blockquote>
            <blockquote>
              <blockquote>
                <blockquote>
                  <blockquote>
                    <p><img src="faithexplosion.png" width="314" height="225" /></p>
                  </blockquote>
                </blockquote>
              </blockquote>
            </blockquote>
          </blockquote>
        </blockquote>
      </div>
      <div id="apDiv14">
        <div id="apDiv15">
          <div>
            <div>
              <p> Special Message from Perry Stone </p>
              <h2> Was Jesus Born on December 25?</h2>
              <p> 12/20/2010 </p>
              <p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
              <p>Last   year, in response to the growing number of Christians who celebrate   Hanukkah but hate Christmas, I wrote an article for this website titled   “Hanukkah or Christmas?” I explained why I think Jesus was either   conceived or birthed on December 25.</p>
            </div>
          </div>
          <div>
            <div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
              <p> Prophecy Update </p>
              <h2> What Happened to Global Warming?</h2>
              <p> 12/17/2010 </p>
              <p> </p>
            </div>
          </div>
          <div>
            <div></div>
          </div>
          <div>
            <div></div>
          </div>
        </div>
        <div>
          <p><font size="2">Special Word</font></p>
          <p><font size="2">January 7th, 2011</font></p>
          <p> <font size="2">Dear Viewers:</font></p>
          <p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious            times in church history. Many things are coming upon the world and also upon the church and we (the church) must be totally            prepared to take up our cross daily and venture out into the lost and</font></p>
          <p> <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
        </div>
        <p> </p>
        <div></div>
        <div>
        </div>
        <div></div>
        <p> </p>
      </div>
      <img src="lighthousegraphic2.jpg" width="960" height="1509" />
      <div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
        <map name="Map3" id="Map3">
        <area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
      </map>
</div>
    </div>
<p> </p>
</div>
</div>
<div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
<div id="apDiv11">
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="#">Home</a>    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
      <ul>
        <li><a href="#">Fresh Word</a></li>
        <li><a href="#">Itinerary</a></li>
        <li><a href="#">Prophetic Word</a></li>
        <li><a href="#">Sermons</a></li>
        <li><a href="#">Special Words</a></li>
        <li><a href="#">Word of Month</a></li>
      </ul>
    </li>
    <li><a href="#">Men Ministry</a></li>
    <li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
      <ul>
        <li><a href="#">Chris Gore</a></li>
</ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
      <ul>
        <li><a href="#">Contact Us</a></li>
        <li><a href="#">Donate</a></li>
        <li><a href="#">Events</a></li>
        <li><a href="#">Our Store</a></li>
        <li><a href="#">Prayer Request</a></li>
        <li><a href="#">Salvation</a></li>
        <li><a href="#">Subscribe</a></li>
        <li><a href="#">Vision</a></li>
        <li><a href="#">We Believe</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Resources</a>
      <ul>
        <li><a href="#">Prepare for Disaster</a></li>
        <li><a href="#">How to Fast</a></li>
        <li><a href="#">Heaven & Hell</a></li>
        <li><a href="#">Warfare Prayers</a></li>
        <li><a href="#">Wisdom Words</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
      <ul>
        <li><a href="#">Article Archive</a></li>
        <li><a href="#">Audio Prophecies</a></li>
        <li><a href="#">Color for Year</a></li>
        <li><a href="#">Major Articles</a></li>
        <li><a href="#">Prophecy Archive</a></li>
        <li><a href="#">Prophetic Articles</a></li>
        <li><a href="#">Word for Year</a></li>
      </ul>
    </li>
</ul>
</div>
<div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
<div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Need help with Editor

I am brand new to doing a post, so please bear with me. I have Photoshop elements 8. the program is not allowing me to open the editor. Any ideas? I click on it and it acts like it is thinking and then nothing....

oh my!! i think this may be WAY over my head!! i have a computer savvy friend that I will get to look at your suggestion. fyi, I had called the help line and for $30 they can talk to me. he suggested that i buy Photoshop 9 and get free "phone talk".
thanks
Date: Mon, 7 Feb 2011 12:20:54 -0700
From: [email protected]
To: [email protected]
Subject: need help with Editor
Try making a direct desktop icon for the Organizer and Editor and that will bypass the welcome screen and any advertising.
On Windows right click on the desktop and select New >> Shortcut
Browse to Computer OS C:
And find the PSE Organizer application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
Inside the Adobe >> Photoshop Elements Organizer (yellow folder) you are looking for an application file “PhotoshopEementsOrganizer” with six small icons (e.g. representing thumbnails)
Select it and click OK
Click next
Rename by taking out Photoshop Elements leaving just the word Organizer
Then click finish
You should now be able to launch directly form the desktop by double clicking on the icon.
+You can set up a similar direct link to the Editor application (.exe file which has the blue PSE icon). As before take out Photoshop Elements just leaving the description Editor and it will show up clearly on the desktop.
+You can keep the standard Photoshop icon which links to the welcome screen but I prefer to delete it from the desktop. If you ever need to get to the welcome screen you simply click Window >>Welcome on the top menu when the application is open.
>

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

I need help with my bill

We have put together a few FAQs to help with some of the questions you might have about your BT bill.
Please click on the links below to find the answer you're looking for:
I don’t understand my bill – what do all these charges mean?
Help with my rental charges
__ (i) Where can I find a breakdown of my BT rental charges?
__ (ii) I recently changed my package and think I've been charged twice
I need help with my bill
Why is my bill higher than normal?
I thought the calls in my Calling Plan were free - why have I been charged?
Can I view my BT bill online at My BT?
What do I do if I want to change or cancel my BT package?
Check below for is a list of our archived billing posts:
How to get the most from your online account
Why go paper-free?
Live Chat - Connect to a billing advisor
Your Bill explained
How to get the most from your MyBT account and reasons to go paperfree
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Where can I find a breakdown of my BT rental charges?
The rental charges (sometimes called service charges) shown on your bill are for line rental, plus any additional services such as Calling Features. You're charged for these in advance.
You can view your current rental charges online when you sign up for My BT.
I recently changed my package and think I've been charged twice
When you change your telephone calling plan, calling feature, broadband or BT Vision package, you may get a bill that's confusing or looks like you've been charged twice.
Don't worry, you won't be charged twice. We charge in advance for our services, so you'll see charges for both your old and new services on the bill, even though your old service has been cancelled. You'll be refunded what you paid in advance for your old service on the same bill that shows the advance charges for your new service.
This can also happen when we rename or re-price our products and services. You should see that you've been refunded for the old product name and then charged the same price for the new product name.
Example:
Below is an example of what you might see if you change your package after your bill is issued.
Mr. Smith is on the Unlimited Evening and Weekend Plan and is charged in advance for his service. This is shown on the bill he gets every three months.
Mr. Smith's bill is issued on 1st May and will show the standard advance charges from 1st May to the 31st July, as shown below.
On the May 23rd Mr. Smith calls BT to change from the Unlimited Evening and Weekend Plan to the Unlimited Anytime Plan. Because he's already been charged for the Unlimited Evening and Weekend Plan on the bill from the 1st May, the changes he's made will be shown on his next bill.
When Mr. Smith's next bill is produced on 1st August, he can see the changes to his rental charges. You can see from the highlighted area on the bill pictured below that Mr. Smith has been refunded the charges he's paid in advance for his old Unlimited Evening and Weekend Plan.
This refund is from the time Mr. Smith changed the package (23rd May) until the end of the previous billing period (31st July). The refunded amount shows as -£35.63.
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

Re: I need help with wi-fi password

i need help with wi-fi pass word

I am trying to connect my iPhone with my wireless router and looks to be rejecting the password I have saved for my password for my rounter. I tried emailing for it and the support page for this is not recognizing what I think would have been the email I had at the time it was set up--we are currently not using that email address--and tried by current internet email and it's rejecting that too. I registered as a new user to get in to look for help on this. My previous email probably would have been [email protected]
I have my serial number and such to my router (model: WRT54GSv1.1) if needed. Please advise.

Begginer needing help with "package" word

Similar Messages

Maybe you are looking for