Begin_sampling - is it for real ?

Hi All,
Did anyone managed to use the begin_sampling / end_sampling from the batch sampling suite, or is it an old function leading to nowhere ?
And if so, then how ?
Thanks,
A.

hi ashiker1.
when acquiring this suite, you get a valid pointer. however, the pointers to the functions in the suite all seem to be NULL.
this case appears to be a mistake by the API engineering team.
every once in a while you'll stumble upon an ill-wired function in the AE API.
we've seen similar cases here before:
http://forums.adobe.com/message/1799231#1799231
http://forums.adobe.com/message/2393993#2393993
i, of course, can't give you a definite answer.
sadly we don't get much help from adobe personnel here in the forum. (unlike the Photoshop SDK forum, with 2 adobe personnel giving support regularly...)
consider contacting AE's API Engineering team.
back in the days when bruce bullis was in charge of AE's api he posted his Email address in the SDK documentation.
his successor, zac lam, is a bit more shy... (look up "AEGP_DoCommand" in the SDK guide, see if you could spot the address).
maybe he could shed some light on this subject.
if you get an answer from adobe, or you have some new findings,
please post it back here, and contribute to the common knowledge.

Similar Messages

Pxi 1042 configuration for Real-Time

I have purchased
PXI-1042
controller 8187
one module for data capturing.
I want to configure the said pxi for Real-Time purposes,
so what steps should I follow?
thanks
Abbas
Solved!
Go to Solution.

The Real-Time Deployment License is different from the LabVIEW RT module.
When you purchase a PXI controller, part of what you are buying is the operating system that is installed on it. If you purchased the controller with Windows on it then you purchased the copy of Windows that came with it. Now that you want to put the real-time operating system on it, you need to purchase the license for it.
But that's all legal stuff.
And you are correct that there is a copy of the RTOS on the controller. But if your controller has its disk formatted as NTFS you will not be able to use it. The RTOS requires that the hard drive be FAT32.
If your controller is FAT32 then you can boot into BIOS (hit delete while booting), and select Real-Time in the Boot Configuration to make your controller boot into Real-Time.
If you controller is not FAT32 then you will need to format the controller first, using the disks I have previously mentioned.
Please let me know if you have any questions.
Justin Parker
National Instruments
Product Support Engineer

MAX support of SNTP for Real-time controllers

Hey everyone,
I have some PXI systems that allow me to enter a Time Server IP address directly into the MAX setup for the device but I have some other PXI chassis that don't. Does this have to do with the version of Real-time they are running? Can anyone tell me what version of RT and MAX started supporting Time Servers natively through MAX for real-time controllers?
Thanks,
Craig

Hi craige,
It looks like SNTP synchronization is not fully supported for PXI systems:
http://forums.ni.com/t5/LabVIEW/Configuring-PXI-8184-controller-to-synchronize-to-SNTP-server/td-p/1...
However, for CompactRIO, synchronization with SNTP servers began with LabVIEW Real-Time 8.6:
http://digital.ni.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43
The forum post I linked above does have some links to customer created examples relating to NTP and SNTP Time Servers.
Please note that those examples are both unsupported and a little bit on the older side.
Regards,
Joel I.
Applications Engineer
National Instruments

Apple feedback contact for real?

At 10 pm Pacific time I received an email from FCPX_feedback at apple.com saying they wanted to follow up on my FCPX forum post about my positive experience with FCPX and that I have to trash the preferences. Could that email be for real? I always read the feedback is read by Apple, but no contact to the contributor would be made.
Has anyone here ever received an email from Apple about their feedback?

Great, thanks Tom. I look forward to working with them.

Hi just upgraded to lion , now i can't use "word" can this be for real?

hi just upgraded to lion, now i cant use "word" help please

If it's Word 2004 or earlier, it's for real. That is a PPC app and it is no longer supported in Lion. You need an Intel version of Office. You and a lot of others who didn't know are out in the cold.

Are BT for Real??

Hi,
Ok as you know I've done a bit of moaning about BT Infinity or lack of. Well today tops the lot:-
Had an email today me that it would be better for me to change my infinity options from 1 to 2 as I've gone over the 40GB on option 1.
You What!!!!!!!!!!!!!!! Ok thats not good to be told that But wow hang on I've not even got BT infinity yet,
So I go back to the thread heading " are bt for real "
Iechyd Da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Hamish72, I never tho about that lol. Spoke to them yesterday and asked them what they are playing at and have just checked my bill and the Infinity Option 1 has been removed from my account.
I just know that this is going to come back and bite me in the ? when they get thier act together and get infinity up and running around here.
Iechyd Da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Data source for real estate

Hi,
Is there any one know the data source (tables) for real estate tax Installments, tax assessment, tax payment?
Thanks

Victor
Please Check these two data sources and you may have to enhance them
http://help.sap.com/saphelp_nw04/helpdata/en/e2/94153fdb6f6b36e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2f/66a1fda1c34bfab3f3f426eddd1492/frameset.htm
Hope this helps
Thnaks
Sat

FI CO Integation: Document type for real-time integration with FI not there

Dear Gurus,
This is the error message that I got and I am looking for a solution could anyone help me please.
I was doing simultaneous costing and doing Product Cost Collector reports.[KKBC_PKO]
This is IDES 6.00 ehancement package 4,
How do I define a document type for real-time integration with FI?
Message no. FAGL_COFI003
"Diagnosis: For CO documents to be transferred into Financial Accounting in company code 1000, -the system requires a document type".
How do I go about with this, need steps to resolve this please
Thank you
Saleem

Hi,
1. Check which variant is assigned to your company code '1000' using this IMG path
IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg ->Assign variants for Real-time Integration to Company codes.
2. Check if document type is assigned to the variant assigned to your Company code in this path:
IMG->Financial Acctg (New)->Financial actg global settings (New) ->Real-Time integration of Controlling with Financial Actg -> Define Variants for Real-Time Integration.
Hope this helps.

BI content required for Real Estate and Plan Maintenence

hi;
I have BW 7.0 server with BI_CONT addon and support package level is 6 ie SAPKIBIIP6.
now we need the business content for real estate and plan maintenence. i have read documents which contains the business content , but i couldnt find the particular one am searching for ie..real estate and plan maintenence....
should i update the patch?
regards
seethy
Edited by: Seethy Meerasahib on Jun 18, 2008 1:57 PM

hi
its already available in the InfoProvider..
Real estate comes under= Financial management and controlling
Plant maintanece = Defence force and public security..
regards
seethy

"Waiting for real-time target (RT PXI target) to respond" error when the program waits interrupts

Hi there,
I have developed an application to detect interrupts generated by a electronic card and act in consequence. The program has been developed in labview but it calls a dll; that was created with labwindows. The dll is programmed to open the visa communication, enable events and install the interrupt handler and when an interrupt is detected, it reads the value of the different registers of the card and returns it to labview to visualize them.
The problem is that when the program waits for an interrupt, a prompt appears with the message "Waiting for real-time target (RT PXI target) to respond" and the only option I have is to click on the button to disconnect from the pxi or just wait. If I wait and I generate an interrupt, the prompt disappears and the application visualize the data like it was expected.
To wait for the interrupt the following code has been programmed in the function:
while (flag == 0)
Sleep (1000);
When an interrupt occurs, the value of flag changes to 1 and the function continue without any problem. I am not really sure, but probably here is the problem and probably this is not the best way to wait for an interrupt because the sleep function suspends the thread for the configured time, but at least the computing load in the PXI is between 0% and 1%. I was wondering if somebody knows how to wait for an interrupt without "lost" the communication with the PXI and if there is a better way to do it.
Any answer will be welcome and thanks for them,
Jaime
Solved!
Go to Solution.

Hello Naity,
First of all, in which thread runs the waiting process? Is it scheduled in another thread than the function setting the flag?
It scheduled in the same thread that I use to configure the communications and configure the card. Anyway, here is the pseudo code of the function interrupt that I programmed under labwindows,.
char* interrupt(void)
1. Open visa communications
2.Install handler interrupt --> status = viInstallHandler (instr, VI_EVENT_PXI_INTR, IntrHandler, VI_NULL); // the function IntrHandler will be called when an interrupt occurs
3. Enable event PXI interrupt
4. Wait
while (flag == 0)
Sleep (1000);
5. Visualize the data coming from the interrupt (registers and values measured with the card)
6. Uninstall handler interrupt
7. Close visa session
The interrupt handler function IntrHandler is called immediately when an interrupt occurs and the pseudo code is like this
ViStatus _VI_FUNCH IntrHandler(ViSession instr, ViEventType etype, ViEvent event, ViAddr userhandle)
1. Disable some functions of the card to avoid damages.
2. Read registers and put them in a buffer
3. Change the value of flag ---> flag = 1;
In labview, I call the function interrupt with a call library function node (see the capture attached) and the program reads and saves the data from returned from the function.
Secondly, I am not sure this method is the most elegant. You could for example register an event with the function and, insteand of setting a flag to 1, trigger the event and schedule it in another thread (if the function is thread safe). This could reduce your CPU Load even more and seem a bit cleaner to me.
I've never used events before in labwindows but I will try to do it in this way. But anyway, I suppose that I should; somehow, wait the event to occurs in labview while the waiting for the event is programmed inside the dll...and probably the same prompt that i am trying to avoid is going to appear again, because I am not returning the "control" to labview (I mean, labview executes the dll and waits for the event to occur. Then the execution of the labview program is stopped in the call library function node executing the dll)
Third point, which environment of development are you using?
I am working with LV 2010 sp1 and Labwindows cv 10.0.1 and with the real time module.
I did also another test, I divided the program in different functions, one to initialize the communication, another to wait until a interrupt has been detected and the other to obtain the data from the interrupt and close communications. With labview I call first with the call library function node the function to initialize, later I call inside a while loop the wait function like this
int waitAseconds (double seconds, short stop_waiting)
if(flag==1 || stop_waiting == 1)
flag = 1; //to detect the stop_waiting button
printf("flagAA =1 stop waiting = %d time = %d\n", stop_waiting, clock());
return flag;
else
SleepUS(seconds*1000000);
//a++;
printf("flag a= %d stop waiting = %d time = %d\n", flag, stop_waiting, clock());
return flag;
and when the program detects an interrupt, the function returns to labview the flag and stops the loop. Finally, it reads the values and close communications.
In this way, the prompt appears but after running the application for 10 or 20 minutes and also i checked that there is a time gap between the executions in the loop.
Thanks for your reply and your help,
Jaime
Attachments:
capture.png ‏40 KB

Business packages for real estate

Hi,
Any one know whether we have any business packages for real estate.If anyone know please send me the link or mail documentation to this mail id [email protected]
Thanks,
kumar

Hi Kumar,
I only found one business package about real estate in the portal content portfolio. It is by a third party. If you go to this link: https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
and search on real estate you will find it.
Good luck,
John

I have recently come across Mackeeper...is it a scam or for real

Mackeeper software... is it for real or is it a scam?

Scamware
Avoid it at all costs
Causes performance problems
Allan

Defining Account Determination for Real-Time Integr

Dear all,
I haven't understood yet about Account determination for the real-time integration of Controlling (CO) with Financial Accounting (FI).
Please tell accounting process that use this account. And give me a detail example.
Thanks so much
Minhtb

Hello
This is the new feature in New GL accounting
During allocations in Controlling, most of the postings created do not affect Financial Accounting. These postings do not update any G/L account transaction figures; they are postings within Controlling. If, however, an allocation in Controlling leads to a change in the functional area or any other characteristic (such as Profit Center or Segment) that is relevant for evaluations in Financial Accounting, a shift occurs between the affected items in the profit and loss statement. For this reason, this information has to be transferred to Financial Accounting. This reconciliation between Controlling and Financial Accounting takes place by means of real-time integration.
As a result of real-time integration, all Controlling documents that are relevant for General Ledger Accounting are transferred from Controlling to General Ledger Accounting in real time. This means that Financial Accounting is always reconciled with Controlling.
A document is created in Financial Accounting for each posting in Controlling. This means that the detailed information contained in the CO documents is always available in reports in New General Ledger Accounting. This information can be sorted by the following, for example:
●     Functional area
●     Cost center
●     Internal order
Real-time integration replaces the reconciliation postings from the reconciliation ledger. Consequently, you do not need a reconciliation ledger.
If, however, you do not set the Reconciliation Ledger Active indicator in Customizing for the controlling area, you cannot use the reports belonging to report groups 5A* (5AA1-5AW1). You set this indicator in Customizing for Controlling under General Controlling ® Organization ® Maintain Controlling Area. The reconciliation ledger serves as the data source for reports belonging to the report groups 5A*. You find these reports in the SAP Easy Access menu under Accounting ® Controlling ® Cost Element Accounting ® Information System ® Reports for Cost and Revenue Element Accounting.
Replacement reports are available as follows:
●     You find the reports in the SAP Easy Access menu under Accounting ® Controlling ® Cost Element Accounting ® Information System ® Reports for Cost and Revenue Element Accounting (New).
●     You can create additional reports in report group 5A21. You can assign the report group to any drilldown report of New General Ledger Accounting using the report-report interface.
●     From the report Financial Statements Actual/Actual Comparison, you can call up the report Cost Elements: Breakdown by Company Code. You find the report Financial Statement: Actual/Actual Comparison in the SAP Easy Access menu under Accounting ® Financial Accounting ® General Ledger ® Information System ® General Ledger Reports (New) ® Balance Sheet/Profit and Loss Statement/Cash Flow ® General ® Actual/Actual Comparisons.
You can define account determination for each controlling area. You do this in Customizing for Financial Accounting (New) under Financial Accounting Global Settings (New) ® Ledgers ® Real-Time Integration of Controlling with Financial Accounting ® Account Determination for Real-Time Integration. In this way, you use the same account determination as for the reconciliation ledger (transaction OK17). You can then use the reconciliation ledger reports to compare FI balances with CO balances.
Prerequisites
If you use real-time integration in at least one company code, you need to have activated company code validation for the related controlling area. You do this in Customizing for Controlling under General Controlling ® Organization ® Maintain Controlling Area ® Activate Components/Control Indicators. Otherwise, the reconciliation between Financial Accounting and Controlling at company code level is not possible.
In Customizing for Financial Accounting (New), you have processed the IMG activities under Financial Accounting Global Settings (New) ® Ledgers ® Real-Time Integration of Controlling with Financial Accounting.
Activate real-time integration for all company codes between which you want to make CO-internal allocations.
In the IMG activity Define Variants for Real-Time Integration, do not select all CO line items for transfer. If the same line items are to be transferred as through the reconciliation posting from the reconciliation ledger, select the following line items:
●      Cross-Company Code
●      Cross-Business Area
●      Cross-Functional Area
●      Cross-Fund (if you use Public Sector Management)
●      Cross-Grant (if you use Public Sector Management)
Features
Value flows within Controlling that are relevant for General Ledger Accounting such as assessments, distributions, confirmations, and CO-internal settlements are transferred immediately. The FI documents are posted with the business transaction COFI. They contain the number of the CO document. This means that you can call up the CO document from the FI document, and vice versa.
Activities
If a document could not be transferred because the posting period was blocked in Financial Accounting or no account was found, for example, the document is included in a postprocessing worklist. You need to check this worklist regularly and process any documents in it. From the SAP Easy Access menu, choose Accounting ® Financial Accounting ® General Ledger ® Corrections ®Post CO Documents to FI.
Example
An internal order for business area 0001 is settled to a cost center of business area 0002. The document from this allocation is transferred in real time to Financial Accounting.
Reg
assign points if useful

I never purchased Book " Heaven is for real" I want to get refund on that

I have not purchased or authorise buying the Book " Heaven is for real" I want to get my mpney back on it

Help here > How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase

How configure Define Account Determination for Real Time Integration

Hi All,
I am doing configure of new company just know about how do i configure for Define account determination for real time intergration. what is the use? Pleaes give me some clarity with example.
Thanks
Pankaj

Hi,
Please go through the below link:-
http://help.sap.com/saphelp_erp2004/helpdata/en/22/c2cf4031288131e10000000a1550b0/content.htm
Regards,
Gaurav

Begin_sampling - is it for real ?

Similar Messages

Maybe you are looking for