Beginner facing a scope problem

Hello all, first let me say that it's my first day in color so I might just be ultra dumb, but I spent quite a bit of time trying to have my color's video scope working properly and I couldn't make it happen. I imported in Color an HD video clip that I previously converted in FC from .mov/h264 to Apple Pro Res HQ and I cannot see the distribution of pixels' color in my scopes. I have some sort of visualization, but instead of showing me the Red the Green and the Blue it's just monochrome (yellow/amber). I tried all the possible switches before posting this but I couldn't see the color in RGB. Please advise. Thank you very much.

Setup Room > User Prefs
Uncheck "Monochrome Scopes" just above the fourth HSL control at the bottom.

Similar Messages

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

I could not pair my bluetooth device with my ipad mini retina display. Is there anyone facing the same problem?

I could not pair my bluetooth device with my ipad mini retina display.
My ipad could not detect the bluetooth device. I do not facing this problem with my iphone and my older ipad on the same bluetooth device.Is there anyone facing the same problem?

Yes I tried pairing with my bluetooth car hands-free set - Not discoverable.
I tried to pair with my bluetooth headset - Also not discoverable.
I have no problem with my other apple products my older ipad2 and my current iphone5.
Just this ipad mini retina display could not discover the above bluetooth device.
Any idea on how to solve this? Thnaks.

Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?

Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?

I have same Problem. I tried all options - Reset All Settings, Erase Content & reset all settings, Upgrated to IOS8.1, Restore using iTune. But problem persists.
When I turn Cellular Data or Wifi ON, then there is a lag while opening the Apps. But If I turn Data/Wifi off, phone becomes super fast. I have checked with my friends. They are not facing this issue. Not sure if Apple know this.

I am facing a caching problem in the Web-Application that I've developed us

Dear Friends,
I am facing a caching problem in the Web-Application that I've developed using Java/JSP/Servlet.
Problem Description: In this application when a hyperlink is clicked it is supposed to go the Handling Servlet and then servlet will fetch the data (using DAO layer) and will store in the session. After this the servlet will forward the request to the view JSP to present the data. The JSP access the object stored in the session and displays the data.
However, when the link is clicked second time then the request is not received by our servlet and the cached(prev data) page is shown. If we refresh the page then request come to the servlet and we get correct data. But as you will also agree that we don't want the users to refresh the page again and again to get the updated data.
We've included these lines in JSPs also but it does no good:
<%
response.setHeader("Expires", "0");
response.setHeader("Cache-Control" ,"no-cache, must-revalidate");
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control","no-store");
%>
Request you to please give a solution for the same.
Thanks & Regards,
Mohan

However, when the link is clicked second time then the request is not received by our servlet Impossible mate.. can you show your code. You sure there are no javascript errors ?
Why dont you just remove your object from the session after displaying the data from it and see if your page "automatically" hits the servlet when the link is clicked.
cheers..
S

HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.

Hullo sir,
I'm Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.The printer window shows you have to print pages < 50.what cani do?

Hi @thangaraj,
I see by your post that you have only printed 300 pages and it is now it is showing you have less the 50 pages left.
I would like to help you resolve this issue.
Is this the original toner that shipped with the printer?
You should get approximately 1500 pages according to the specifications for what ships in the box.
The page count is based on page yield. Depending on what you were printing.
Still I believe you should have gotten more then 350 pages, unless you were printing full page pictures in black and white.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points

Facing a major problem while performing restoration of my mssql DB

Dear Experts,
I am facing a major problem while performing restoration of my mssql DB. The situation is like
1. I have successfully take full and transactional log backup in a external device using MSSQL Server Managemnt Studio.
Backup was successfully completed as per MSSQL Server Managemnt Studio message.
2. Try to restore the same using MSSQL Server Managemnt Studio. It is showing the following error
System.Data.SqlClient.SqlError: RESTORE cannot process database <DB_SID> because
it is in use by this session. It is recommended that the master database be used when
performing this operation.
I have followed the guidelines specified in the link
[SAP Help Link for Restoring the <SAPSID> Backup from a Device |http://help.sap.com/saphelp_nw70/helpdata/en/f2/31ad56810c11d288ec0000e8200722/frameset.htm]
But everytime I am getting the same error message. I have checked with all options but there
was no resolutions. Kindly advise me in this regard.
Thanks and Regards,
Partha

http://social.msdn.microsoft.com/Forums/en-CA/sqltools/thread/37ee8e24-7aaa-472b-861a-fc0cc513338a
hope it helps

I am facing call drop problem (incoming

I am facing call drop problem in my I phone 5 since morning today, Outgoing & incoming both.
However i switched off the handset & also pull out SIM from the Handset, again insert & reset the functions but it's stilll not working.
Please help.

Hi there Kuldeep Mishra,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
-Griff W.

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

A Full DTP is converted into delta DTP and facing some data problem

Recently Full DTP(DSO to DSO) is converted into delta DTP , we are facing some data problem in first request.Some data in D2 are not updated properly after just converted in full to delta. Please let me know if you have any idea.
Example :
DSO : D1
DSO : D2
Previously FULL DTP D1->D2
Now Delta DTP D1->D2

Hi,
First time run of delta DTP will extract all the records from the source...
As u have already run the Full load and followed by delta,i guess u can use direct change log option...
rgds,

Scop problem

Hi ,
I having a problem communicating with loaded swf inside main
file.
Im using that script to have a transition between external
swf :
http://www.kirupa.com/developer/mx2004/transitions.htm
most of it working fine but im having problem communicating
with variable:
Stage.swf:
The main movie start to play and on its last frame it has the
following action:
this._lockroot=true
//loading the first movie after the animation finish
_root.currMovie = "main";
_root.MC_Container.loadMovie(_root.currMovie+".swf");
stop();
portfolio.swf
Than I press on the portfolio button and I get another main
portfolio swf that has external files loeaded as well.its dividing
the portfolio into categories , each category loading external
file.
First frame:
this._lockroot=true
_root.currMovie = "portfolio_3d";
_root.MC_Container.loadMovie("portfolio_3d.swf");
midframe=10;
stop();
buttons :
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "portfolio_print";
_root.MC_Container.loadMovie("portfolio_print.swf");
} else if (_root.currMovie != "portfolio_print") {
if (_root.MC_Container._currentframe >=
_root.MC_Container.midframe) {
_level.currMovie = "portfolio_print";
_root.MC_Container.play();
portfolio_3d.swf
the external file that loaded into the portfolio file is for
example : portfolio_3d.swf ,
the first frame action:
this._lockroot=true
midframe=10;
middle frame has a stop(); command
the last frame loading the next after the current movie
finish:
_root.MC_Container.loadMovie(_root.currMovie+".swf")
the problem is that in the portfolio page, when I click the
sub categries(3d,print,etc) , I get always the same movie. It seems
like the variable doesn’t see the movie in the lowest level.
It seems like a scop problem
my url :
www.shaygaghe.co.il
thanks for your time ,
Shay Gaghe

what is the script that you have on the buttons on the bottom
of the page that are supposed to load the new content? I think it
may have something to do with your lockroot.

Beginner facing a scope problem

Similar Messages

Maybe you are looking for