Beginner question about RAW/DNG files and Aperture + Adove

I used to use Microsoft Expression Media. When I would edit a .DNG file in Photoshop and update the sidecar or JPEG preview, EM would show the .DNG with the new adjusted preview in its catalog.
I noticed Aperture 3.0 doesn't read these adjustments from my .DNG files. Is there a way to get Aperture to properly read my .DNG files?
Conversely, when I make RAW edits in Aperture, can I view these on the .DNG master in Photoshop? How?

Adrian:
I have been using DxO Optics Pro in conjunction with Aperture. The easiest workflow that I have found is to run the images through DxO before bringing them into Aperture. I have DxO export the converted images as 8-bit TIFFs. (Sixteen-bit TIFFs are really big.) I, then, import the TIFFs into Aperture. There are two disadvantages to this approach: I do not get to bring the original RAW file into Aperture and using DxO on all images, even those that turn out to be rejects, takes a lot of time.
I have also played around with adding images to Aperture, exporting masters before doing any Aperture image manipulation, running the exported images through DxO, exporting the converted images as 8-bit TIFFs and reimporting the TIFFs into Aperture. This can be done without Catapult. I think the advantage of Catapult is that it will automatically stack your processed TIFFs with the original RAW files in Aperture. The advantage of this approach is that I can use Aperture to decide which images I want to process in DxO. Remember that DxO will not see any work that you have done on the image in Aperture; this is why I do my DxO work before doing any Aperture manipulations.

Similar Messages

(newbie) Question about replacing .class files and web.xml file

I'm new to servlets and I have two quick questions...
Do I absolutely need a web.xml file to define all my servlets, or can I simply place .class files into the WEB-INF directory and expect them to run?
If my application server (for example Tomcat) is running and I replace a servlet .class file, do I need to restart the server for the new .class file to take effect?
...or are both of these questions specific to the application server I'm using?

Hi,
From an article I read:
With Tomcat 3.x, by default servlet container was set up to allow invoking a servet through a common mapping under the /servlet/ directory.
A servlet could be accessed by simply using an url like this one:
http://[domain]:[port]/[context]/servlet/[servlet full qualified name].
The mapping was set inside the web application descriptor (web.xml), located under $TOMCAT_HOME/conf.
With Tomcat 4.x the Jakarta developers have decided to stop allowing this by default. The <servlet-mapping> tag that sets this mapping up, has been commented inside the default web application descriptor (web.xml), located under $CATALINA_HOME/conf:


A developer can simply map all the servlet inside the web application descriptor of its own web application (that is highly suggested), or simply uncomment that mapping (that is highly discouraged).
It is important to notice that the /servlet/ isn't part of Servlet 2.3 specifications so there are no guarantee that the container will support that. So, if the developer decides to uncomment that mapping, the application will loose portabiliy.
And declangallagher, I will use caution in future :-)

Three questions about signed jar file and applet

I use three signed jar file. Each of them signed by different certificate. First of JARs contain applet class. When I start applet from html page I see message “This applet was signed by…… but Java cannot verify it… Do you trust…?”. All times I press “Yes I trust” and after this questions applet stop to work end exit. If I use only one certificate for signing of three JARs then applet continue to work after question. 1) What should I do to fix this bug? 2) Is it any method to check from applet that user press Trust button? Is it any method to emulate work of SecurityManager to check that Certificate object is trusted (I want do call some method check(Certificate) and if certificate is not trusted I want to see message with question: “Do you want to trust this certificate” and so on)?

Hello Jarman,
1. If I have a signed jar file, then as long as the
certificate is recognised as trusted that applet can
run as a fully trusted application on the client
machine. So I should not have to add lines such as
permission java.lang.RuntimePermission
"readFileDescriptor", "read" ;
permission java.lang.RuntimePermission
"writeFileDescriptor", "write" ;
to my java.policy file. true/false ?true
2. If I am running a signed jar file in the Java
plugin then I do not need to have a verisign or thawte
certificate (however to allow my certificate to be
accepted I do have to import it into the cacerts file
on the client machine). True/false?true
3. Following on from question 2, if I want to be able
to run an applet on a client machine, without messing
around with ANY files on those machines, I need a
verisign or thawte certificate. True/false?true
4. (And finally) Apart from a security exception
saying that I need to add one of the lines like those
of question 1, is there any way I can get other debug
information as to why the signed jar file is not being
recognised as signed?No. This could be a problem of importing your certifcate into the wrong place.
The information on the following link is a little bit dated but it helped me to successfully install a testcertificate and sign an applet with it.
http://www.suitable.com/Doc_CodeSigning.shtml

A Question about RAW and Previews

I have just recently starting shooting in RAW (mostly for the post production editing abilities - I am an avid amateur photographer bent on learning as much as I can). I set my camera to capture in RAW + L. I don't know why I feel like I want it to capture both the RAW and JPEG file, and thus leads me to my first question: Is it necessary to have the camera capture both the RAW and Large JPEG? I am assuming the answer to be no, as I am sure if after importing the RAW file into Aperture, you could always export a JPEG if you wanted one? So no need to fill up your internal memory (if using managed masters) with the extra JPEG? Is this thinking correct?
Next, if you do import RAW-only files and then want to export certain images, do you have a choice to export the original RAW image? It seems that it only allows you to export a JPEG Original Size. To answer my own question, perhaps you have to export the Master in order to export the full RAW file when exporting? If you want to export a JPEG, you have to export not the Master, but a version of the Master? Is this correct?
Lastly, I wanted to ask a question about Previews. I have my preferences set so that previews have the highest quality with no limits to size. What is the significance of setting it this way? I just assumed that if I wanted to share an image at the highest quality without exporting it, this was the way to go. Is there any validity to this? The reason I ask is that I don't want to have all of these high quality previews taking up internal disk space if I really don't need to. Is there a way to change the preview size once previews are created? Meaning, if you have it set to generate low quality previews, can you change it dynamically to high and vice versa?
I know this is a lot in one post. Thanks for tackling it.
Mac

You can change the quality of the Previews in the Preferences -> Previews tab.
You can regenerate Previews with the Delete and Update Previews under the Images menu.
Regards
TD

Importing DNG files to Aperture 2.1.4

Hi,
I am very new to RAW image files and using aperture. I want to be able to take RAW image pictures and make use of them on aperture and so I have added CHDK on my canon ixus70. I know this topic has come up before but I can't seem to add to those.
Problem I am having is that once the pictures have been taken Aperture doesn't seem to support them. I have tried to convert the .CRW files using dng4ps2 which creates .DNG files (these were blank black files in aperture) and then converted those using adobe dng converter (these imported, but then said that they are unsupported by aperture).
I want to use Aperture as it has been the most recommended photography software, unless experts here can state otherwise.
Any help or guidance would be much appreciated.
S

I had a similar problem with my Canon SD1100 IS. I was converting the .CRW file to .DNG using DNG4PS2, compiled on Snow Leopard, then converting to Adobe DNG with Adobe's DNG converter. By generating the .DNG file right on the camera, as described here:
http://www.flickr.com/groups/canonpowershots5is/discuss/72157610078065768
I was able to use the newest version of Adobe's DNG converter on the camera's DNG files and then import into Aperture. An older version of the DNG converter did not work. You will need to run a program on windows to generate a badpixel file per the instructions. Hopefully this works for you.

My complaints and Questions MP4 M4V video files and other complaints

My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, James

Was playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks

In case my input RAW/DNG files are already applied white balance , is there a way to cancel the white balance in light room ?

Hello I am new to lightroom and I am verifying this tool as a tool for raw converter (for image quality team)
In case my input RAW/DNG files are already applied white balance gain
Is there a way to cancel the white balance in light room ?
Thanks
Ron

Make sure that Develop Settings being applied during import is set to "None".

Basic question about importing wma files

Hi, I have a basic question about importing wma files. I ripped some cd's on a Mindows computer using Media Player, but now want to copy them to my Mac and use them in iTunes on my Mac. when I use Import in iTunes, nothing happens and I cant even seem to copy them one by one using the Music folder.
Can someone help me?
thanks
eMac Mac OS X (10.4.4)

iTunes for Mac doesn't support .wma files.
If you can use a PC to convert them, you can use one of many freeware applications. Google for 'wma to mp3'.
For the Mac there's the shareware program EasyWMA that can convert them.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files.   What am I missing here?

I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files when both are present on the SD card. JPGs are used for quick proofing on an iPad.    DNG RAW files are edited on a Mac Pro (2013).    Other than deleting the JPGs before importing images from the SD card, is there any way to force Photo to select and import only the DNG images?

Thanks Larry,
I did see the J stacked in the lower left of the thumbnails but couldn't figure out how to get to whatever is below it.   How do you select R?
I use an iPad to do quick proofs of my images.   A JPG is good enough for a proof ( dust on the lens, composition, blown out image, etc. ).   The iPad is JPG friendly and can load the images quickly.    Serious editing takes place on my Mac Pro with the DNG files.   I use the same workflow with the the Leica M 240.   iPhoto has been a quick and easy importer to the Mac capturing all of the metadata in the EXIF sidecar file ( location, date, time, camera settings, lens type). A quick scan in iPhoto for the "keepers" let's me export those worth editing to Lightroom/Bridge/Photoshop. I typically shoot 50 images from three locations in a normal day. If I'm lucky I'll get 1 worth real work to add to the portfolio.

Having trouble placing RAW / dng files in idesign 5.5. Any suggestions?

Having trouble placing RAW / dng files in idesign 5.5. Any suggestions?
Here's what i've done so far:
Updated my raw plug in
I shoot on canon rebel t3-i

Open the RAW or DNG file in Photoshop as a Smart Object. Then save as a PSD file. Place the PSD in InDesign with File > Place
InDesign cannot place RAW files. However, if you use the workflow I suggest, you can still edit the RAW/DNG files if needed. To edit, choose Edit Original from the InDesign Links panel, and the PSD image will open up. Then double-click the smart object and it will open in Adobe Camera Raw. Saving the changes in PSD will update them in InDesign.

Beginner question regarding 32-bit mixing and mixdown workflow

Hello
I have a beginner question regarding 32-bit mixing and mixdown.
If I edit some 16Bit, 44.1kHz Stereo WAV Files and put them into multi-track view to do crossfades, how should I do the mixdown?
Audition shows me in multi-track view, that it is doing 32-Bit mixing.
Can I just mixdown to 16Bit, 44.1kHz Stereo without any dithering (as the files are 16Bit, 44.1kHz Stereo to begin with), or will I lose quality that way?
I will be performing a normalization to 96% to the mixdown and then split to tracks in Audition, as in the end I want to to have an audio CD.
I guess I could mixdown to 32Bit, then normalize and in the end save back to 16Bit, 44.1kHz Stereo WAV (with dithering, I suppose?), but I want to avoid any unnecessary converting steps.
Greetings

Any time you do any processing on a 16bit file in 16 bit only it will degrade the audio slightly due to rounding of the calculations. Working in 32 bit floating point (Audition's default) takes account of all bits generated due to processing.
So it is always best to work in 32 bit, even if your originals were 16, all the way through until the last stage of saving the files for CD burning. Any losses due to conversion will be insignificant against those due to working 16 bit.

Trouble Downloading Raw photo files and JPEG photo files in CS5

PS CS5 will not download raw photo files and JPEG photo files. The software will not recognize these files coming from a Canon G12 camera. How can I remedy this situation?

It should recognize the jpg files, but witht the G12, you need to update your camera raw. I believe there is a version what will work with CS5 and the G12.
http://helpx.adobe.com/photoshop/kb/install-camera-raw-6-5.html

Leica X Vario DNG files support @aperture?

Leica X Vario DNG files support @aperture?

Aperture's camera support comes from the OS. Does not look like the Leica X Vario is currently suppored. See http://support.apple.com/kb/HT5371.
-scott
<Link Edited by Host>

HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also

Beginner question about RAW/DNG files and Aperture + Adove

Similar Messages

Maybe you are looking for