Beginner Question: How to disable Sound in Mini-SAP-System

Hi.
I am at the very beginning with ABAP and installed the Mini-SAP-System.
The sound effects make me crazy, how can you turn them off? I did not find any information in the help of sap.
Anyway, does anyone not turn off these crazy sound effects ?! How can you work concentrated with them?
Thank you a lot...

Ok, sorry, i should have posted it in another forum i see.
>
bala wrote:
> In the top right in any SAP screen (Customize local Layout). Go through the tabs and you'll see it in
> the area where you set messages E.g. 'beep at message'
>
> Confirm, if solved.
Ok, i am within local layout, then options. The first tab contains "messages" with the options:
beep at message
dialog windows at success message
and two more.
None of these is activated. So I wonder why I get the sounds nevertheless each time i make a click within the mini SAP system ?!
And I do not find any other sound options anywhere at the "local layout" configuration...
Edited by: Kai Waehner on Jan 13, 2009 10:58 AM

Similar Messages

How to disable right click on SAP portal login page

Hi,
How to disable right click on SAP portal login page. Our requirement is one should not be able to right click -
>view source. on the portal login page.
Best Regars,
Tushar

Hi Tchanvan,
If you search google with "javascript disable right click" you will get loads of javascript code. This will also help you to gain knowledge.
@Explanation to last post : You need to import standard logon par file in NWDS. Create javascript file to disable right click and then include this file in your logon page. i think login page name is portalLogin.jsp and then deploy this new PAR file.
regards,
Jigar Oza

How to setup workplace message in SAP system

Hi Experts,
how to setup workplace message in SAP system.
when am logon SAP GUI i am getting mesage of Document workplace. ( you have one new document)
saying that in Inbox i have 1 document.
my client they dont want Receive that pop up message. thy want receive document but no pop up message .
where can i do customize thia i hope there was a T-code for this.
Thank INadvance,
Anthyodaya.

Hi,
Go to transaction SBWP and Click Distribution list and choose the list where you can find one check box send express. you just deselect the check box and save it. After that you will not receive any express note . but you will get messge to your inbox.
Regards,
abi

How to unlock users in a SAP system if all of them are locked

How to unlock users in a SAP system if all of them are locked
Posted: Mar 21, 2007 10:07 AM         Reply      E-mail this post
Hello Experts,
In any SAP System,if a user having authorizations has mistakingly locked all the users of the SAP system,then how wll we unlock those users bcoz we wont be able to logon into the SAP System. Requested to revert your valuable replies at earliest.This happened with us,how to resolve it.My Email Id is [email protected] .
Regards,
Saumya

Hello Siva And Manas,
Thanx for ur replies .
Manas: These SQL statements we hv to run at the Command Prompt level only na.......
Siva : U r telling to delete the SAP* user ,u dont mean with the System created default user SAP* rite but u mean to delete our self created SAP*/any super user rite? Secondly how to delete tat user at the database level?
Regards,
Saumya
If all the users are locked , they can only be unlocked via sql.
Actually waht happens is if the uflag field of an user in table usr02 is 0 then the user is unlocked. Different values of the uflag field in table USR02 mean:
0          User not locked
32         Locked by CUA central administrator
64         Locked by administrator
128       Locked after failed logon
Incase all the users are locked execute the following sql to unlock them
update sap<sid>.usr02   (means update sapd01.usr02 or sapq01.usr02 etc)
set uflag='0' ;
commit.;
This unlocks all the users.
update sap<sid>.usr02
set uflag='0' where bname='xxx';
commit.;
This unlocksonly the user xxx.

How to Import Transport Files to SAP System

Hi Experts,
I have installed BO XI R3.1 SP3 Integration tool kit for SAP Solutions with Java Connectors.Now i can able to see SAP after login into the CMC. I have installed prerequisites like SAP GUI,Xcelsius,BO XI 3.1 Enterprise.
1)Can you please tell me how to import transport files to SAP System?So that i can connect to BW to Bo environment.I am unable to understand the process to do above task form pdf.

Hi Venkat,
in case you have never done that before I would suggest you talk to the basis admin person and let him do it.
ingo

How to active ABAP Proxy in SAP system.

Hi All,
I want to work with ABAP proxies.How to active ABAP proxy in SAP system.What the configuration is needed.Is there any configuration is need in XI system to work with ABAP proxies.Please help me..
Thanks,
Kishan.

Hi Kishan,
You have to check whether ur r/3 system's(WAS 620 or above) excahnge profile has entries for integration builder.
Pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is:
http://r3servername:5<instance>00/exchangeProfile
I hope this provides you a solution.
Regards.
Praveen

How to post inbound idoc in sap system?

Dear All,
How to post inbound Idoc in sap system?
Regards,
Amar
Edited by: amar kumar on Nov 23, 2009 2:53 PM

Hi Amar,
Use the FM IDOC_WRITE_AND_START_INBOUND to post an inbound IDoc. Just build the EDIDD and *EDIDC8 tables and enter a profile for a inbound message type from a partner. It returns a IDoc number. Don't forget to do commit work.
Regards
Abhii

Beginner Question: How to put 5 V on an output?

Hi everybody,
I am an absolute beginner here, a Biology student that has to do electronics in Labview now...
I want to do as much of this myself as possible, but need truly beginners hints, hoping to be clever enough to put it together myself with your information.
I need to control some outputs, and monitor some inputs. I am focusing on the outputs at the moment.
Questions:
How do I make a block in my block diagram that can put a variable voltage on an output? I need two controls, one that puts a voltage on an output of 0 to 10 V continuously, the other puts a voltage on an output of 0 to 5 V in increments of 0.1 V
Any hints will be highly appreciated. I have Labview 6 to work with. Pointers like 'look at p
age XX of the manual' will do, but descriptions here, or through my mail... anything will be highly appreciated.
Thanks in advance

In article <[email protected]>,
"Erado" wrote:
> That's the beauty of this, I am not entirely sure (yet) I am going to
> get a good look of the setup in about a month, but they want me to
> prepare a concept VI before then. To me that made little sense, but my
> comments on it hit a brick wall...
Well, for me and my past gigs this has been a very common situation. When
I worked for telecom we would have to develop apps for instruments that we
wouldn't receive for six months. Luckily we had the basic concept of how
they were supposed to run and this was adequate for development. It
sounds like you're in a similar situation.
> What I do know is that over two of the terminals there is a 5V voltage
> applied in steps of 0.1 V. So I should put in something that makes it
> possible for me to control this output in 50 steps of 0.1 V.
Lemme see if I understand you from this post and your first one. You
would like to buid a user interface that includes the following:
1) A boolean control that gives these two options:
a) output a continuous voltage in the range of 0-10 volts b) output a
ramping voltage starting at 0 (or 0.1) volts and ending at
5 volts using 0.1 volt increments with a dwell time of x mseconds
2) A boolean to stop the application
(perhaps another one to pause it)
3) Several numeric controls:
a) numeric control for the output voltage b) numeric control for the
dwell time (optional) c) numeric control for the voltage increments
(optional) for if the
user wants to use values other than 0.1 volts
4) An indicator that shows what the measured output voltage is. This is
good for verifying your output signal. A chart would be nice.
This is a top down approach which is helpful for laying out the
application's user interface. The next thing you want to do is build some
subVIs to simulate your voltage signals. Once you get some hardware you
can simply replace these simulation subVIs with the real ones that
actually communicate the hardware.
I'm not sure if your measuring the output voltage too. I kinda just
assumed this but that would require another subVI. I won't tell you how
to build the subVIs (I can't take all the fun out this) but I hope I've
pointed you in the right direction.
Merry x-mas!
-Kevin
PS: learn how to play with control references. they're very convenient
when you need to update the front panel indicators with data from a subVI
sitting in its own continuous loop. it avoids global variable abuse.

Beginner question - how to efficiently check if a photo is part of the selection

Dear all,
Sorry for this beginner question, however I don't know how to solve it and I'm sure that there is a quick and easy answer to this:
My target is to get all the "heads of stack" (photos with Position 1 in stacks) of the selection ("photos" below).
for i, photo in ipairs( photos ) do
local photoName = photo:getFormattedMetadata('fileName')
   if photo:getRawMetadata( 'isInStackInFolder' ) then
   --Photo is in a stack
        local photoHeadOfStack = photo:getRawMetadata('topOfStackInFolderContainingPhoto')
        local stackPos = photo:getRawMetadata( 'stackPositionInFolder' ) -- get the position in the stack
        local photoHeadName = photoHeadOfStack:getFormattedMetadata('fileName')
        app:logVerbose("Photo nb ^1, name ^2 is in a stack with the position ^3", i, photoName, stackPos)
        if stackPos == 1 then
        -- photo is master of the stack
             stackTop[#stackTop+1]=photo
             app:logVerbose("Photo ^1 is top of the stack ^2", photoName, #stackTop)
             -- check if couple if correct
        elseif photos.photoHeadOfStack then
             app:logVerbose("Photo ^1 is in a stack, but not on top. Top of the stack already selected", photoName)
        else
             stackTop[#stackTop+1]=photoHeadOfStack
             app:logVerbose("Photo ^1 is in a stack, but not on top. Top of the stack ^2 - ^3 ", photoName, #stackTop, photoHeadName)
        end
end
end
In the if structure in the middle checking the Position in the stack, if the Position is not 1, I would like to check if the photo heading the stack ('photoHeadOfStack') is part of 'photos'. I tried 'elseif photos.photoHeadOfStack then' and 'elseif photos[photoHeadOfStack] then' but it doesn't work ->this elseif is never true even if 'photoHeadOfStack' is part of 'photos'.
Is there anyway to have this check done without checking "manually" photos ?(via for example a for Loop)
I'm sure that Lua proposes this, but I don't know how...
I thank you for your Support!

    --[[ This code creates "stackTops", an array of LrPhotos that are the
    tops of all the stacks containing photos in the array
    "photos". ]]
stackTopSet = {}
for _, photo in ipairs (photos) do
    local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
    if stackTop ~= nil then stackTopSet [stackTop] = true end
    end
stackTops = {}
for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end

How to disable automatic start of SAP NetWeaver ABAP trial in Windows XP

Hello experts,
please, how is it possible to disable automatic start of SAP NetWeaver ABAP in Windows XP after windows startup?
Thank you,
Ondrej

Right-click on "My Computer", and choose Manage. Open the "Services and Applications" node on the tree structure on the left, double-click on "Services". Find the service called MAXDB:NSP Right-click on this and change the startup type to "Manual". Click "Apply", then "Ok". Then go to the service labeled as SAPNSP_00 and do the same thing, setting it to manual. That should be it. These services will then be starting only when starting the system via the MMC
Regards,
Rich Heilman

How to connect to a non-sap system in HCI?

Dear experts,
My scenario is to replicate the customer information to SAP Cloud for Customer from a non-sap system. The non-sap system is in the internet and it can be accessed by any system.
Now my questions is: The customer information flowed from the non-sap system is in a very specific format, should we develop a webservice for the customer information in HCI? If so, how to create new webservice in HCI? Does SAP allow user to create customized webservice in HCI?
BR,
Kurt

Hello Kurt,
HCI is available as a platform as part of the HANA Cloud Platform edition. With the platform edition you can develop your own interfaces within HCI. HCI has SOAP, FTP, IDOC and a succesfactors adapter which you can make use of.
It is possible to import webservice definitions and create the custom interface with your own mapping.
Best regards,
Fons

How to implement SSO to non-SAP systems using SAP logon ticket?

Hello,
We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
Can anyone please give me some leads on this, in particular:
1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
Roy

Hi,
I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
Here are some links you might want to check:
OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
wss4j: http://ws.apache.org/wss4j/
shibboleth: http://shibboleth.internet2.edu/
opensso: https://opensso.dev.java.net/
On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
Hope this is helpful...
Let me know if you need further assistance on this topic
Cheers

How to transport ALEAUD to non-SAP system?

Hello,
I have R/3 system which receives documents from non-SAP system. I want to transport acknowledgements from R/3 back to non-SAP system. I want to use standard SAP ALE monitoring possibility. All needed information exists in ALEAUD IDOC which can be generated by program RBDSTATE.
But I can not process ALEAUD IDOC in SAP XI because it always automatically converts to internal XI acknowledgement.
How to transport data from ALEAUD to non-SAP system?
Best regards,
Eugeny

Hi,
We had converted the Idoc to Zidoc for the same. Thats one way to do it.
Lets see if anyone has done it with the standard IDoc
Regards
Vijaya

How to check received mails in SAP system

Hi Experts,
I have a requirement where I need to send an email from Outlook to SAP system using SMTP.
All the SMTP configurations and settings have been done.
I had a query that how do I check that the mail is recieved in the SAP system.
Like we have Utilities - Overview of send orders to check the mails sent from the SAP system, do we have some place to check the receiving mails also?
I came to know about a SOOD table, but no entry is been made in it when I test sending mail.
Any help would be highly appreciated
Regards,
Saumya

Hi Saumya,
You can try this just to see if your CRM is receiving emails.
Go to t-code SCOT and then Utilities->Trace Settings. Activate the trace for inbox.
Then send an email to your CRM system.
Wait a few seconds and then go to SCOT again, and then Utilities->Trace Selection.
Check if an entry corresponding to your email was created.
If not, maybe some configuration is missing. I've always worked in a Interaction Center scenario, with ERMS integration. For that, the configurations steps need were:
- Activated the workflow
- Configurate t-code SO28 to generate the ERMS object
- Used ERMS rule modeler to route my emails to an organization ID
- Activated service SAPCONNECT (with an user associated for authorization)
Hope that this may help you to go a little trough.
Kind regards.

Beginner question: How to create a duplicate

Sorry to ask such a basic question .. I'm a beginner! Can't seem to find out how to create an exact duplicate of a photo I have finished editing ... so I can create a black & white version ... can someone help?

You are welcome, welcome..... ........The nicest and fastest reply in some time!
There are a ton of tutorials available online, and if you have any trouble finding same, post back and recommendations will be made.

Beginner Question: How to disable Sound in Mini-SAP-System

Similar Messages

Maybe you are looking for