Beginner question on tween timeline Please help

Trying to remove the ends of tweened timelines without messing up the complex paths I have created in the beginning of them. If you just drag the tween to the left it compresses all the key frames already placed on the timeline. Example:
can you eliminate frames 72 to 92 without compressing what was already on frames 1-72? Or maybe I just need to stop it from looping instead. I would really appreciate help. Thank you.

You should always be able to either remove frames (shift+F5) or remove any keyframe (right-click, remove keyframe) to get rid of keyframes. Frames before the removed frames or keyframes won't be affected.

Similar Messages

  • Hi . im forget security questions in apple id please  help me

    im forget security questions in apple id please  help me

    See Here..
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Here  >  Apple  Support  iTunes Store  Contact

  • HT5312 i cannot remember the answers to my security questions.  Can you please help me reset them?

    I cannot remember the answers to my security questions. Can you please help me reset them?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • I forgot the password of icloud and i forgot the security question also can you please help me

    i forgot the password of icloud and i forgot the security question also can you please help me

    it's [email protected]

  • I can't remember answers from security questions... Please help me....apple support don't answer.(((

    I can't remember answers from security questions... Please help me....apple support don't answer.(((

    1. See my User Tip for some help: Some Solutions for Resetting
        Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for
            support and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

  • Everyone keeps skipping my question....please help me!

    When a purchased a song on itunes a message came up
    "Error unable to dowload error 450 Please check that the connection to the network is active and try again"
    What does that mean? I stoped the process and then restarted it. It still didnt work. I have payed for it so its not like i'm just gonna forget about it!I then purchased 2 other songs and they downloaded perfectly without any trouble! Whats up with this one song??
    please help me!

    I answered your question in your duplicate post before you posted this.
    Please have patience when you post a question. Everyone here is just a fellow user, helping out as they have time, knowledge and inclination. It's rude to expect someone to answer your question within only a half-hour after you first post, then post again demanding an answer (in particular after someone already answered you). You really need to wait longer - at minimum several hours and better at least a day - and only then if you don't get an answer bump your original thread by posting as a reply to your original post.
    BTW, it also helps if you post in the correct forum. Questions about the iTunes Store are usually best posted in the Using iTunes Store for Windows forum.

  • I need to change my rescue email but i cant remember the answers to my security questions!!!   Please help me!

    i just want to change my itunes password,
    I need to change my rescue email because i forgot his password and i cant remember the answers to my security questions!!!! Please help me!

    You cannot and need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (118288)

  • HT201303 I cannot purchase anything using my apple account because I forgot my security questions. Can you please help me?

    I forgot my security answers to my questions and cannot access or purchase anything. Please help
    <Email Edited by Host>

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • Restore Question . . . Please Help

    Please Help. I just backed up my computer to an external hard drive, did an "Erase and Install" of OS 10.4, and am now trying to restore my original Safari settings (bookmarks, settings, etc). How do I go about this.
    Thanks for your help.
    Nkulu

    On your external HD, navigate to ~/Library/Preferences/ (where ~ is your username) and copy the com.apple.Safari.plist file into the same directory, but on your iMac's HD.
    For the bookmarks. go to ~/Library/Safari/ on your external HD and copy the Bookmarks.plist file to your iMac's HD into the same directory.
    Hope this helps!
    -Ryan

  • I have iTunes 11 on my new PC. I forgot my security questions and I no longer have my email address listed for backup. I cannot fix these questions without this. Please help as I want to make purchases and I cannot do this now.

    I need the answer to this please!

    1)  Apple ID: All about Apple ID security questions
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security

  • Network questions/concerns... please help

    Hi, I need some networking help/advice.  My neighbor asked if she can use my wifi to stream tv/movies only. I couldn't say no because I felt bad and didn't want to say i didnt trust them.  So I hooked up a Netgear router for the wifi while connecting my gaming systems by ethernet to my modem…  I tested the wifi from the Netgear system and it seemed to be working.  I stepped a way for a while and decided to check it again & was able to connect to the NETGEAR but not the internet anymore…..  I know I made no changes but couldn’t find the problem until i ran the network diagnostics on my MacBook….  it created a diagnostic log and suddenly repaired the connection. Is it possible the neighbor was trying to access my local network and caused problems to the wifi?…  how do I find something like this and is there a way to give her access without exposing any of my devices?… and is the way i’ve chosen to do it even protecting at all??…. 

    You have posted your question in a forum and section devoted to Apple and in particular to the MacBook Air. You may get an answer here -- but you may want to consider posting it somewhere that dedicated to networking issues where it may attract an answer from people with more expertise and interest in that type of issue. One example is http://forums.anandtech.com/forumdisplay.php?f=12

  • Apply different eases to sections of a tween? Please help.

    Flash CS4 has a feature where a tween can have more than two keyframes. If a tween has three keyframes, then changing keyframe 2 will affect the motion from keyframes 1 to 2 as well as the motion from keyframes 2 to 3. This is a very cool feature.
    But there's one problem: I can only figure out how to apply an ease to the entire tween, not to the motion between two keyframes. Do you know how I can apply one ease to the motion between keyframes 1 and 2, and a different ease (or the same one a second time) to the motion between keyframes 2 and 3?
    I've had two ideas so far for getting the same result:
    1) Make a custom ease that includes all the eases I want. I find this too cumbersome and imprecise, unless there's a way to copy an existing curve into the space between two keyframes of a second curve (without replacing the whole second curve).
    2) Split the tween at each keyframe. But then every time I want to adjust keyframe 2 I have to do it twice, and sometimes the break ends up jerking slightly. I'd really rather keep keyframe 2 a shared keyframe.
    Any other ideas? Thanks.

    Hey there,
    If you're easing properties that are not X, Y, Z, the easiest way to do this is to just make the property keyframes smooth - the curve will ease the property into and out from that keyframe.
    Spatial properties would need the custom ease. The snapping feature in the custom ease graph will hopefully make this a bit easier if you aren't using it already. Please see my blog post for details: http://flashthusiast.com/2008/11/20/flash-cs4-how-to-ease-between-keyframes-using-new-moti on-tweens/
    We realize this is cumbersome for the spatial properties, and it's something we're working on for future revisions of new motion.
    Jen.

  • I have two questions *NEW TO MAC PLEASE HELP*

    Hi I've been a windows user basically my whole life and am now entering the new realm of mac. For now I have two basic questions:
    (1) I want to select certain files and delete them, but I dont want to select all of them, and I dont want to select one by one. With windows to do that I simply click and press shift on the first and last file that I want, and everything in between. I have no idea of how to do that on Mac and I really need to.
    (2) I am a spanish speaker and on windows whenever I need to use the letter ñ I simply go Alt+164. Is there a way to use this letter in mac by just using keystrokes??
    If anybody could help me out on this it would be greatly appreciated.

    (1) I want to select certain files and delete them,
    but I dont want to select all of them, and I dont
    want to select one by one. With windows to do that I
    simply click and press shift on the first and last
    file that I want, and everything in between. I have
    no idea of how to do that on Mac and I really need
    to.
    and you didn't try it? it works the same way on a mac: click on the first and shift click the last.
    to select one by one, click and command click the next,...
    (2) I am a spanish speaker and on windows whenever I
    need to use the letter ñ I simply go Alt+164. Is
    there a way to use this letter in mac by just using
    keystrokes??
    press alt-n and then press n

  • IMPORTANT QUESTION... Please Help

    Hello everyone, I have a question for ya'll. I have an iPhone and my wife just got a 3GS for work. Now, I have iTunes running on my PC with over 140 Apps that I have downloaded. I am trying to figure out a way to get all of my Apps onto her work laptop, So I put the folder with all the apps into a shared folder on my network. Then on the laptop went into the shared network and copied the folder full of apps and then copied it to her laptop.. All of that went just fine, but when I went to add the apps to the iTunes on the laptop I got a message saying "An unknown error occured (-50)" Does anyone know why this would happen? Im thinking the only way I can get those apps onto the laptop is if I copy them to an external hard drive and then to the laptop. Any help would be greatly appreciated!! Thank You!

    Quoted from another thread:
    "Having searched Google I could find no assistance with this but did manage to fiddle around and work it out myself. I copied the Mobile Applications folder to my desktop and then tried adding that folder to the library from within iTunes. This worked fine and to double check I consolidated my library once again. I notice now that iTunes created another Mobile Applications folder but in a different sub folder location (within iTunes root folder). Fixed it for me - hope that is of some help to others.
    In summary, the fix for me was to copy the Mobile Applications folder with all your apps in it from your external hard drive back to your Mac (desktop) and then add to library, then consolidate.
    For me, this is now resolved. "

  • Error message while putting clips in timeline, please help!!

    This msg pops up all of a sudden when I try to put clips in the timeline, but I opened another sequence in the same project and it does'nt give me the error msg, which is.....this edit can not be done because a transition would be cut or an item to one side of the transition would become too short. Thanks for the help.

    Hi(Bonjour)!
    Lock all tracks but the one where you want to insert the clip.
    Michel Boissonneault

Maybe you are looking for