Beginner's question re Audition Effects
This is a real starter question so hoping someone can help me out..
I spent ages fiddling around and getting an audio clip sounding good with EQ earlier I saved it to my premiere pro project. I later realised I hadn't applied to the other audio clips on the track. How can I go back to the original EQ effect saved on the 1st clip and save that as a preset to apply to the others?
Many thanks
There are options within the effect for saving presets. Just to the right of the preset box is a tab that you hit to save your settings as a new one. If you haven't used the EQ for anything else, the chances are that your previous settings will reappear from the local preset cache when you re-open it, and you can then save them.
Similar Messages
-
These are some beginner font questions if someone has the time/patience.
I've never paid much attention to fonts over the years, never installed
any other than those that might have come with applications. Early on,
15 years ago or so, I settled on Palatino and I've stayed with it for
most docs (Word 5.1a and now Word vX) and often for other apps (Safari,
Now).
I just upgraded to Tiger (10.4.4) and I use Word vX.
Questions:
1. I gather from looking at Font Book that when I'm using Palatino in
Tiger that OS X is getting it from my OS 9 System folder for Classic.
It does not look like Palatino is in any other locations including MS
Office vX. Does that make sense?
2. I always thought that Palatino was a very basic, always available
font. Not so?
3. If I decide to stop using Classic, and I'm close to that time, can I
transfer those fonts to OS X? If so, to which location is best.
4. And are the same fonts used for printing and screen? In other words
back in pre OS X days I thought some fonts came in screen versions and
print versions but my memory is hazy on that. Not only that.
Thank you for any education or links for info.
Powerbook G4 Ti Mac OS X (10.4.4)1. I gather from looking at Font Book that when I'm
using Palatino in
Tiger that OS X is getting it from my OS 9 System
folder for Classic.
It does not look like Palatino is in any other
locations including MS
Office vX. Does that make sense?
That's correct.
2. I always thought that Palatino was a very basic,
always available
font. Not so?
It seems to be out of favor.
3. If I decide to stop using Classic, and I'm close
to that time, can I
transfer those fonts to OS X? If so, to which
location is best.
Yes, you can just put it in Users/username/Library/Fonts (or Library/Fonts for all users). -
How do we transfer Audition effects presets from CC to 2014?!
Welcome to Day 3 of Adobe CF. Finally got Premiere issues smoothed out. Apparently today is Audition Headache Day.
Can anyone explain to the community how we can export the effects presets from Audition CC and import them for use inside Audition CC 2014?
Thanks in advance.For other PC users asking the same question, copy EffectPresets.xml from the 6.0 folder and place in the 7.0 folder according to the path below. Obviously Adobe couldn't be bothered to make sure these settings migrated and thereby forced you to go on this grand search for a solution instead of using their software to be productive and make media.
From
C: / Users / User_name / AppData / Roaming / Adobe / Audition / 6.0
To
C: / Users / User_name / AppData / Roaming / Adobe / Audition / 7.0 -
Questions on the Effects settings
Well, the next thing that somewhat throws me is the use of the special effects. For example, when I clicked on the special effects for a particular object it always comes up with Bevel and Emboss and Directional Feather checked. I typically have to uncheck those parameters.
Additionally, clicking on drop shadow has always been a source of confusion to me. I just cannot get the correct distance or size to typically come up with a drop shadow that looks good, especially on text.
Therefore, I have a few questions that possibly you experts can help me on:
Q1. Is there a way to reset the parameters in effects dialog box to the defaults?
Q2. Typically what parameters do you all use to have nice-looking drop shadows for text? Mine always appear to be cloudy and just don't have the clarity. I had to mess around and over and over trying to get something that looks nice. Then the next time I have to do something I forget what I did the first time. You would think that I would take a picture of the properties settings for drop shadow and save it by my computer!
Q3. When you are trying to do a drop shadow for text, do you typically set the settings drop-down box to "Text" or do you just leave it on the default setting "Object"?
Q4. Do you know of a script that I could run whenever I wanted to apply the Drop Shadow to Text?
Well, I guess that's all for now, but I know for sure that when I submit this I will remember something else that I wanted to ask.
Thank you in advance,
Bob WagnerHi Bob.
It sounds like you set the effects with nothing open, which is what you need to do (unset them with nothing open) to restore the default to not having them. Most defaults are set this way. If a document is open with nothing selected, you youare creating a new default for the document. If no docs are open you are creating a default for all new work, but existing documents will not be affected.
In a similar vein, if you get a drop shadow you like, write down the numbers and you can set this as the default value (don't forget to uncheck the box for drop sahdow when you're done or it will be applied to everything). You could also save the settings as an object style.
Whether you set the shadow to oject or text would depend, I think on the circumstance and whether one does things you don't like. -
A few questions about After Effects and CGI (Computer-generated Imagery)
Hi,
I'm very new to After Effects and this forum. But I have a few questions.
Now, I have recently started a movie project with my friend at a workshop. It's an action/sci-fi film and I'm probably going to be the editor and if needed in charge of visual and/or special effects. This sounds like a pretty big job for a noob, but we don't have a time limit with the project so there's time to learn.
But to my questions. I've thought of introducing CGI to myself (very simple of course). I've studied the use of blender, and I think I'll use it for the modelling and animation. But should Ae be used in any stage of producing the CGI or should everything be done in blender? If I do, how? Am I going in the wrong direction (wrong kind of software, etc.)?
Also, I'm not talking of fully producing the scene with the computer, but adding things like characters or items, maybe special effects.
I'm hoping for an answer to all my questions, but if you have just one or two answers I'm happy to hear them too. You're also welcome to correct me if I've misunderstood something. Please ask for further specifications if you need any!pek859 wrote:
1. I'm very new to After Effects and this forum. But I have a few questions.
2. Now, I have recently started a movie project with my friend at a workshop. It's an action/sci-fi film and I'm probably going to be the editor and if needed in charge of visual and/or special effects. This sounds like a pretty big job for a noob, but we don't have a time limit with the project so there's time to learn.
3. But to my questions. I've thought of introducing CGI to myself (very simple of course). I've studied the use of blender, and I think I'll use it for the modelling and animation. But should Ae be used in any stage of producing the CGI or should everything be done in blender? If I do, how? Am I going in the wrong direction (wrong kind of software, etc.)?
4. Also, I'm not talking of fully producing the scene with the computer, but adding things like characters or items, maybe special effects.
5. I'm hoping for an answer to all my questions, but if you have just one or two answers I'm happy to hear them too. You're also welcome to correct me if I've misunderstood something. Please ask for further specifications if you need any!
1. Welcome to the family. AE is big, Really big. It's hard. Really hard. You have no idea how hard AE is to learr and to master.
2. No time limit is good but you will need some money.
3. This is not a Blender forum. You want to explore filmmaking, CGI and Blender-specific forums for that kind of assistance.
4. AE is for your compositing and special effects. But you will need to learn how both apps work before you can decide how to divide up your project. A comparison would be shooting your film. Are you using a DSLR? Do you know why? Or are you using a GoPro? Another example might be Apple's Final Cut Pro. You can edit audio in it but it's better to use an audio application. You can do some special effects in FCP but it's best to do complex stuff in Motion of After Effects. How do you know what app is appropriate Lots of experience. Lots of failures.
5. We were all new to AE and to vidoe editing and to special effects at one time or another. The user forums are not places to learn how to use these applications. You do that with tutorials and books and tons of time. Learning to use Blender to make a robot move is one thing. Making the robot into a character that compels the audience to care about it is quite another. Using AE to create a layer of clouds is one thing. Having those clouds react to the bow waves created by your flying robot as it approaches sonic speeds is quite another challenge. -
Beginner's question: Using Time Machine with a WD External Drive
Hello folks,
Could someone help me with some basic questions?
I have a MacBook with Mac OSX 10.5.5. It has Time Machine but I've never used it before. I've just obtained a Western Digital External Hard Drive which is Mac compatible but, I'm told, may not be formatted for Mac.
1. If that's the case, how do I format it for Mac so that I can use it with my MacBook? Or can I just plug-and-play?
2. Once ready to use, I'd like to use the external drive for two purposes: (a) to create back-up images of my entire computer using Time Machine, and (b) as a second drive where I can just drag-and-drop selected files when needed (e.g. so that I can put photos in a photo folder on my external instead of on my MacBook hard drive). Will my MacBook let me do this, or will using Time Machine effectively reserve the entire external hard drive for Time Machine and not allow my to drag-and-drop files?
Thanks! And Happy New Year!Question 1:
1. Launch Disk Utility (in your Applications/Utility folder.
2. Click the "erase" tab
3. Select your entire WD disk on the sidebar (the uppermost icon).
4. Format: "Mac OS Extended (Journaled)"
5. Name the Disk
6. Click on "erase"
Question 2:
What is the size of your drive? If it is large enough you can partition it but Time Machine backup will "grow". So if it's important to you to save all backups you'll want to give it the whole disk. If not, you can partition the disk at the same time you format it.
Follow the steps here. It will accomplish both Q1 & Q2.
-mj
Message was edited by: macjack -
As a really new beginner for BEx, I would like to ask you guys some basic questions.
1) I have a problem with designing a query to serve our requirement.
Fiscal Year Accounting Num. Amount AVG(Amount)
2006 10001 100 250
2006 10002 200 250
2006 10003 300 250
2006 10004 400 250
Total(AVG) 250
2006 10005 300 350
2006 10006 400 350
Total(AVG) 350
What I want is the forth column, which is equal to the average value of amount in the third column. For example, in group 1 (Accounting Number 10001 - 10004), the average of 100 - 400 is 250. In the forth column, I want to get 250.How can I do this?
2) How can I load a hierarchy from a text file in BI 7.0. I just see the option to maintain the hierarchy in BI, but I can't find the way to load the hierarchy from a text file.Hi,
1.Create a formula or CKF which is equal to Amount. name it AVG(Amount).
right click AVG(Amount) in the query definition.select properties.select calculate single value as 'Average of all values<>0'.
i thnk this shld work!
Regards
Dhanya. -
Quick Question about fade effect
Quick Question:
If I wanted to add a Fade Effect from one state to another
when a button is pressed.
How would I do that within the code?quote:
Originally posted by:
atta707
You can do something like on the click of the button:
var fader:Fade = new Fade(targetUIComponent);
fader.duration = 1000;
fader...;
fader.play();
or listen for currentStateChanging event and write the same
similar code.
or define transitions from one state to another like:
<mx:Transition id="toOneOnly" fromState="*"
toState="OneOnly">
<mx:Sequence id="t1" targets="{[p2]}">
<mx:Iris showTarget="false" duration="350"/>
<mx:SetPropertyAction name="visible"/>
<mx:SetPropertyAction target="{p2}"
name="includeInLayout"/>
</mx:Sequence>
</mx:Transition>
Hey,
I would like to use the "transition from one state to
another", but if you can explain each part for me that would be
helpful.
If you can comment on each line of that code that would help
thanks -
I am still very much a beginner and this is my first time trying to set SSL up. I am experiencing some issues and I am not really sure what to do. I hope this is the right forum to post this.
When I go to https://xxxx.xxxxx.net/myContext my login index.jsp page displays however
1.) In IE it's not showing the page as secured(no lock).
2.) When I log in using valid credentials the url becomes http://xxxx.xxxxx.net:443/myContext/myServlet
and the page I expect to display doesnt. It only displays this:
3.) None of my stylesheets are being used.
When I go to http://xxxx.xxxxx.net/myContext my login index.jsp page displays perfectly and I am able to log in and do see the expected page.
Apparently I missed a step somewhere or just the obvious but how do I get my index.jsp to use SSL. Any help would really be appreciated. Thanks in advance
Crystal
SERVER.XML
<Connector port="80"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="443" acceptCount="100"
debug="0" connectionTimeout="20000"
disableUploadTimeout="true" />
<Connector port="443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="true" disableUploadTimeout="true"
acceptCount="100" debug="0" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS"
keystoreFile=".IRRS_keystore" keystorePass="thepassword"/>
STDOUT.LOG
May 4, 2007 11:20:38 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-80
May 4, 2007 11:20:39 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-443
May 4, 2007 11:20:39 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1031 ms
May 4, 2007 11:20:39 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
May 4, 2007 11:20:39 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.0
May 4, 2007 11:20:39 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
May 4, 2007 11:20:40 AM org.apache.catalina.core.ApplicationContext log
May 4, 2007 11:20:40 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-80
May 4, 2007 11:20:40 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-443
May 4, 2007 11:20:40 AM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
May 4, 2007 11:20:40 AM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/15 config=D:\Tomcat5\conf\jk2.properties
May 4, 2007 11:20:40 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 1313 msAre you intentionally leaving a connector for port 80 open? If you don't need anything to be non-ssl enabled then you should comment out the port 80 connector and just have a connector for port 443. You should then be able to access any of your stuff via https://whatever/whathaveyou...
[edit]
this is an obvious question but you didn't mention it so just in case - you did create a self signed server certificate and import that into the keystore right? (or use a commercial certificate and import that and the CA chain into your trust store)
Message was edited by:
cjmose -
How long does it take for new security questions to take effect?
I am trying to make an in-app purchase from my iPhone, and forgot my security questions. So I went and changed them so that I could input them on my iPhone to make the purchase. Having saved the security questions, the new ones are not appearing when I go to make the purchase now. Ive saved the security questions multiple times, and they still have not changed. Also signed out and back into my account on my iPhone hoping the changes would take effect.
Hi pinkiepie! Welcome to the Verizon Wireless family. Hopefully by now, you've discovered that when your old phone stopped working, your new Verizon Wireless phone was already up and running. A port from another wireless carrier usually takes between 5 minutes and 24 hours to complete, depending on the carrier and the accuracy of the information submitted. During the process of the port, you'll be able to make calls right away from your new Verizon Wireless phone but you will not be able to receive calls. Once the port is finished, the service on the old phone will completely shut off and the new phone is ready for full activation and you'll be able to place and receive calls successfull. In case you're curious, here's a link to more FAQs about Local Number Portability: http://bit.ly/QTARox
Enjoy your new phone and service. Have a wonderful day!
JenniferH_VZW
Please follow us on Twitter @vzwsupport -
Hi All,
After wearing a Gopro helmet in a hockey game, I'm trying to use PE9 to edit the 1.5 hours of footage and make some sort of movie. I have everything split into what I think will be relavent sections but now I find it a little overwhelming. There are so many clips I can never tell where I am or where I want to go.
My Questions....
1) Is there a way to rename all the clips in sequence? For example, the original file is named GOoooo8. Now I have about 10 GOoooo8's. Any other naming tips?
2) Can I tag the clips? When I go back to organizer, the clips are still in the large original files instead of the new small files.
3) Is there a way to get the "opacity: clip opacity" off of the timeline?
Thanks!!
WallyI do not know enough about those particular helmet cam clips to comment on the clips themselves. Most use proprietary codecs in order to fit lots of
video in a small space, and that often means that they behave strangely in programs like Premiere Elements.
As for the Opacity notation on your clips, that is one of your clip's properties and it is listed on your clip because it is often keyframed (as when you apply a fade in or fade out effect). You don't want to remove it. You can, however, click on it and, if you prefer, display Motion instead -- though I don't know if that's what you're trying to do.
The Audio equivalents are Volume (displayed by default) and Balance. -
hi im new to after effects and trying to learn a few step,iv been using youtube for help but this aspect i want to find out about i dont know what to look up to find my answer.
my question is when im making an intro for a video
i have design 1, design 2, then design 3 ,then my name appears .then i want to keep my name on the screen but dissapear the design 1.2 and 3 behind the name then start a dif design behing the name . how to i get from my name along with the 3 designs to my name with no designs and then be able add more designs ?
sorry but above is the best way i feel i can describe it :/ .
is it to do with a new layer or solid that i put after my name to seperate the two ?
if someone can find a video on youtube they feel can show me rather than tell me it would be appreciated!.
thanks!Don't go to YouTube. Go here: Getting started with After Effects
-
Hi,
I was trying to find out how it's made the effect from the website below, I mean the one from the packages in the middle of the website (Domain names, Email hosting ect), on mouse over the image is brighter, is it just a 'image swap' effect but how they put the text then? The second question is about the fade in and out of the text on the bottom of the website (Where is: Why choose Fasthosts) is it possible to do it in Dreamweaver or is this flash animation?
Website: http://www.fasthosts.co.uk/
RegardsOk, Gary gave the right answer about the middle section. Case closed.
About the effect you're talking about at the bottom (I suppose it's the "Why choose Fasthost?" section), it's in JavaScript.
To answer the question "is it possible to do it in Dreamweaver", you can do it by using Spry effect: Select the element you want to animate and in the Behaviors panel, select Effect and then the Appear/Fade (or Blind, which is similar). Enter the settings, and you have a Fade In effect (you may need to change the event, for example to use onLoad instead of onClick).
You can go further (for example, to have many sentences like the other website does) by looking at http://labs.adobe.com/technologies/spry/samples/htmlpanel/html_panel_two.html
If you don't want to use Spry, other JavaScript libraries (like jQuery) surely supports that.
Also, you can look at their code...:
2ticker.js
3Scrolls the "Why choose Fasthosts" content in the footer
4************************************/
5
6var intTotalItems = 0;
7var intLastNumber = 0;
8var objDiv, objContentDiv;
9var tickerDelay = 4000;
10
11function startTicker() {
12 objDiv = document.getElementById("contentscroller");
13 objContentDiv = document.getElementById("displayedcontent");
14
15 if (objDiv && objContentDiv) {
16 /* Loop through the contentscroller UL, give each LI
17 an ID and save the list in an array */
18 for (var i = 0; i < objDiv.childNodes.length; i++) {
19 var item = objDiv.childNodes[i];
20 if (item.nodeName.toLowerCase() == "li" && item.id == "") {
21 item.setAttribute("id", intTotalItems);
22 intTotalItems++;
23 }
24 }
25
26 // Add first load of content
27 objCurrentContent = document.getElementById(intLastNumber);
28 if (objCurrentContent)
29 objContentDiv.innerHTML = objCurrentContent.innerHTML;
30 intLastNumber++;
31
32 // And change it in ten seconds
33 setTimeout("changeContent()", tickerDelay);
34 }
35}
36
37// Display the next content snippet in the list
38function changeContent() {
39 objCurrentContent = document.getElementById(intLastNumber);
40 startOpacityChange('displayedcontent', 100, 0, 1000);
41
42 setTimeout("startOpacityChange('displayedcontent', 0, 100, 1000)", 1000);
43 setTimeout("document.getElementById('displayedcontent').innerHTML = objCurrentContent.innerHTML;", 1005);
44
45 if (intLastNumber == (intTotalItems - 1))
46 intLastNumber = 0;
47 else
48 intLastNumber++;
49
50 // Now do it all again (in ten seconds time)!
51 setTimeout("changeContent();", tickerDelay);
52}
53
54function startOpacityChange(strId, intOpacStart, intOpacEnd, intMillisec) {
55 var intSpeed = Math.round(intMillisec / 100);
56 var intTimer = 0;
57
58 if(intOpacStart > intOpacEnd) {
59 for(i = intOpacStart; i >= intOpacEnd; i--) {
60 setTimeout("changeOpacity(" + i + ",'" + strId + "')",(intTimer * intSpeed));
61 intTimer++;
62 }
63 }
64 else if(intOpacStart < intOpacEnd) {
65 for(i = intOpacStart; i <= intOpacEnd; i++) {
66 setTimeout("changeOpacity(" + i + ",'" + strId + "')",(intTimer * intSpeed));
67 intTimer++;
68 }
69 }
70}
71
72/* Change the opacity of a div (allowing for different browsers) */
73function changeOpacity(intOpacity, id) {
74 if(!IE7) {
75 var objLI = document.getElementById(id).style;
76
77 objLI.opacity = (intOpacity / 100);
78 objLI.MozOpacity = (intOpacity / 100);
79 objLI.KhtmlOpacity = (intOpacity / 100);
80 objLI.filter = "alpha(opacity=" + intOpacity + ")";
81 }
82}
83
84/* Detect IE7 to disable text fade */
85var IE7 = false;
86if(navigator.userAgent.indexOf("MSIE 7") != -1) IE7 = true;
and it's application:
<div id="helpquote">
<div id="contentscrollercontainer">
<ul id="contentscroller">
<li id="displayedcontent" style="opacity: 1;">Affordable web hosting for small businesses.</li>
<li id="0">We're the UK's largest web hosting company.</li>
<li id="1">Secure, reliable web hosting comes with experience: Established 1999.</li>
<li id="2">Small business web hosting services, from a company that knows your needs.</li>
<li id="3">Expert 24x7 email & national rate phone support for all customers.</li>
<li id="4">Affordable web hosting for small businesses.</li>
<li id="5">30 day web hosting money back guarantee & free instant online setup.</li>
<li id="6">Instant web hosting, including easy to use website builder.</li>
<li id="7">Internet access, domain registration, email hosting and web hosting all in one place.</li>
<li id="8">UK web hosting with UK servers.</li>
<li id="9">Secure, reliable, quality web hosting.</li>
<li id="10">Integrated domain name registration and web hosting.</li>
<li id="11">We're the largest UK domain name registrant.</li>
<li id="12">UK domain registration and web hosting gives priority search rankings.</li>
<li id="13">UK web hosting also offers you the best performance and reliability.</li>
<li id="14">Chosen by more web hosting professionals than any other hosting company.</li>
</ul>
</div>
</div>
Nelson -
Absolute beginner's question: scaling video in embedded player
Hi folks,
I'm an absolute beginner in flash video embedding - my company has purchased FMS 3.5 and I have to -simply- stream videos from a server via following HTML-Code:
<object width="800" height="600" id="videoPlayer" name="videoPlayer" type="application/x-shockwave-flash" classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000">
<param name="movie" value="../swfs/videoPlayer.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#000000" />
<param name="allowfullscreen" value="true" />
<param name="flashvars" value="&videoWidth='800'&videoHeight='600'&dsControl=manual&dsSensitivity=100&serverURL=r tmp://<here the url>&DS_Status=true&streamType=vod&autoStart=true" />
<embed src="../swfs/videoPlayer.swf" width="800" height="600" id="videoPlayer" quality="high" bgcolor="#000000" name="videoPlayer" allowfullscreen="true" pluginspage="http://www.adobe.com/go/getflashplayer" flashvars="&videoWidth='800'&videoHeight='600'&dsControl=manual&dsSensitivity=100&serverU RL=rtmp://<here the url>&DS_Status=true&streamType=vod&autoStart=true" type="application/x-shockwave-flash">
</embed>
</object>
My problem is simply the scaling of the videos. The files are .flv-files and do stream very well from the source directory to my browser. But when I change the object-width or object-height the video is just cut instead of scaled.
If I change the videoHeight or videoWidth (in Flashvars) it has no effect. What am I doing wrong?
ps The player naturally scales the clips slightly larger than they really are. So I already guess that there's a setup-file with settings, but I have no idea where to look it up to configure the player.
I would appreciate your help!
Thanks in advance!
kukIN CASE someone has this problem too, it seems the standard Adobe stream player integrated in the FMS-Installation (...) cannot resize the video. So the solution seems to be using another player. I'll use the free FlowPlayer which I also used for replaying .flv-Files, and which has a rtmp-plugin for streaming. Good luck folks...
kuk -
Hello all,
I am just a beginner for EJB, and writing a simple example of EJB. Some questions confuse me.
1. about server
I just use JDK1.3.1 and JSDKEE1.3, is it all right? Do I need another things, for instance, weblogic ( what is this?)?
2. about deployment
I wrote some code( CMP) include: home interface, remote interface, implement class, and primary key. Now , deploy it? Use ��C:\j2sdkee1.3\bin\deploytool�� command, is it?
I thought every EJB need a XML deployment descriptor, my question is: I write this by myself or use deploytool?
3. about datebase
I notice some example use Cloudscape, is this database? Whether can I use another database, for instance, MS Access? If I can, how to access it in CMP, and what is the ��Database JNDI Name��( if I use MS Access) when I deploy using deploytool?
4. about direction
if I finish coding, then compile, and deploy, now, is it OK? I mean, I should move some file to special direction? (I remember the .class file is placed in special direction when I use servlets. )(suppose: I work in C:\mybean. Every file in it)
5. I use JDK1.3.1 and JSDKEE1.3 to write a simple example, do I need anything else in order to achieve EJB?
Thanks1. No you do not need anything other than J2SE 1.3.1 and J2EE SDK 1.3 J2EE SDK 1.3 includes a reference implementation that you can use to do pretty much everything that is J2EE platform standard.
Products such as WebLogic, WebSphere are comercial implementations of J2EE platform specifications. And you would use them for commercial/production quality applications.
See http://java.sun.com/j2ee/faq.html Especially the questions about using reference implementation.
2. You as a developer write the deployment descriptor and the deployment engineer customizes it if required at deployment time.
3. You can use JDBC-ODB driver to work with Microsoft Access databse.
See http://java.sun.com/j2se/1.3/docs/guide/jdbc/getstart/bridge.doc.html#996747
4. No. The files go to the right place at deploy time.
5. No. If you have J2SE 1.3.1 and J2EE SDK 1.3, you arealready on your way to achieving EJBs.
Maybe you are looking for
-
Problem with formatting the saved text to hard disk
I use a modified code from Macromedia for saving the content of a text filed on hard disk. See code at the end. The code works fine and a text file is saved in the given location on the hard disk. The problem is that all of the content of the text fi
-
Runtime ik springs: child nodes break when a parent node is moved
There is something wrong with IK armature springs when used in runtime mode. Child nodes become disjointed with user interaction of parent nodes. Drag spring on right from different points to see bug here: http://gardenofpossibilities.org/flash/ik_sp
-
Cannot see applications in i tunes
Hi I have downloaded couple of applications but i cannot sync them to my iphone as i dont see a seperate sync window in itunes but definately i see a applications folder on the left with those apps Pls help
-
I have an ipod classic with 4gb, it is full. What is the most economical way to upgrade to at least 16gb? (I don't want to delete anything)
-
Hi Gurus, I have a GR, but it didnt pick the price from PO. so GR price is different than PO. can any one tell me the reason for this? Also is it possible to change the price in GR manually?