Beginner's Zenworks - disable status

here's a very rudimentary question for someone just starting out with
Zenworks.
What does the "disable" status do for policy parameters?
I understand the concept of "ignore." I am not sure how "disable" differs
from "ignore."
thanks in advance

Thanks, very clear.
Just one more question though - does this mean that "disable" status rolls
back the setting in the registry to some local setting prior to the ZEN
policy taking effect?
>> Enabled
> The attribute is enabled in the client.
> Any values you enter for it are applied.
>
> Disabled
> The attribute is disabled in the client.
>
> Ignored
> The attribute is ignored (not changed in the client).
> If the attribute is already enabled in the client, it remains enabled.
> If it is already disabled in the client, it remains disabled.
>
>
>

Similar Messages

OID resource goes to Disabled Status after running the post process event handler

Hi,
We have an event handler on post update operation. The event handler using the user manager API to do some modification. We are using the "Lock()" function of User Manager API to lock the user based on attribute value. After running the event handler though the user gets locked as expected, it also disables the OID resource after that. We have other resources along with OID but they are not affected with event handler. Only the OID user is triggering the disable operation on locking the user on event handler. We have used the OID 11g Connector for implementation.
If you manually lock the user in user interface it's not going to disable status.
How we can stop to disable the OID User Account.
Thanks

No.If you lock the user in Console it's not going disable status.
Thanks

Disabling status messages

Can someone tell me how to disable status messages in the web
browser status bar during network communication for Flex 2
applications? Can the same approach be used for HTTPService and
URLLoader requests? Specifically, I'm referring to the
"Transferring data from...", "Waiting for...", "Connecting to..."
chatter during requests. Or, just point me to an example that does
this. Thanks.

I have exactly the same printer and crazy problem. Hopefully someone will reply with a fix...

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

Execute import is in disable status

Hello,
I have created simple flat table with only one column.
I have created simple text file and created system dsn for the same.
I did mapping using "Map Fields" option in MDM import manager. I also added the required column in value matching.
How to execute this to get data from flat file? "Records --> Execute Import" option, is in disable mode. How to get data from flat file through mdm import manager?
Please help me.

Hi Rama
If your execute import is disabled then please check the following things
1)In match records Tab(next to map fields) just see if you have added a field to your right hand window pane.this combination would actually uniquely identify your records.Atleast select one field there.
2)In import status tab strip First check what message it is giving.If in right hand side window pane it shows that there are records it has matched and you are doing this for first time then choose 'CREATE' or if you want you can choose REPLACE but that only when you have created the recoeds once.
Now see your import button status.
Hope this helps
Please mark helpful answers
Regards
Vinay

How to disable status bar messages

hi,
while loading a form or running the forms applications, forms applet writes log to the status bar of internet explorer.
i want to disable some of these messages. because i am listening status bar, for a specific message and these messages causes performance problem.
is there a way to do it?
regards , Engin.
here are the messages i logged :
Finding site: 10.222.4.51
Connecting to site 10.222.4.51
Connecting to site 10.222.4.51
Start downloading from site: http://10.222.4.51:8000/forms/frmservlet?config=tfs
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
(2 items remaining) Opening page http://10.222.4.51:8000/forms/frmservlet?config=tfs...
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/frmall_jinit.jar
Opening http://10.222.4.51:8000/forms/java/frmall_jinit.jar
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/frmwebutil.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Opening http://10.222.4.51:8000/forms/java/jacob.jar
Applet loaded.
Applet initialized.
Applet started.
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsbeans.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/tfsimage.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/jai_imageio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/clibwrapper_jiio.jar
Opening http://10.222.4.51:8000/forms/java/java/awt/KeyboardFocusManager.class
Opening http://10.222.4.51:8000/forms/java/java/awt/KeyboardFocusManager.class
Applet loaded.
Applet initialized.
Opening http://10.222.4.51:8000/forms/java/java/awt/event/MouseWheelListener.class
Opening http://10.222.4.51:8000/forms/java/java/awt/event/MouseWheelListener.class
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/Registry.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/Registry.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/default.dat
Opening http://10.222.4.51:8000/forms/java/oracle/forms/registry/default.dat
Opening http://10.222.4.51:8000/forms/frmservlet?config=tfs&acceptLanguage=en-us,tr;q=0.5&ifcmd=startsession
Opening http://10.222.4.51:8000/forms/frmservlet?config=tfs&acceptLanguage=en-us,tr;q=0.5&ifcmd=startsession
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0?ifcmd=getinfo&ifhost=EDP12PC58&ifip=10.222.12.58
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0?ifcmd=getinfo&ifhost=EDP12PC58&ifip=10.222.12.58
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0
Opening http://10.222.4.51:8000/forms/lservlet;jsessionid=0ade042330d69eb05aec84b344128245ca217665e6c7.e3eNc3iPc3j0ax4LbNeKaxqKci1ynknvrkLOlQzNp65In0
Opening

First off that's what's called a kernel panic and it's the most extreme software problem as the kernel itself is malfunctioning which everything else depends upon.
It's rather easy to resolve, there are usually two causes for it, outdated software or a problem with OS X itself like it lost part of itself somehow on the drive.
So instead of disabling it which you can't as the operating system is basically frozen (not all of it of course) you should just fix it up really quick and all is well.
Depending upon what operating system the machine has gives you different options to #8 Resinstall Just OS X over itself to fix issues in OS X, and with third party "hooks" called kernel extension files (kexts) that some software place into OS X itself.
So you do that here and it won't delete programs or files, but any program with a kext file in OS X is removed by the overwrite process.
So do #8 here and other Steps as you see fit to fix the machine.
..Step by Step to fix your Mac
Of course doing so is going to make some software not work, so you have to check to make sure before you reinstall certain software that it's been updated and works fine with the current OS X verison.

How to Disable status line

I want to hide status line containing 'Record 1/1' , OSC. But i want to display status line that shows 'Transaction commited' etc.
How can i disable it?
null

Hi,
In order to suppress information on the status line, you must hide the entire
console. To hide the console, set the Console Window property to <NULL> in the Form Module Properties sheet. The Console Window
property cannot be altered programmatically at runtime.
The console contains the status line and the message line. If the console is not displayed, then NO messages on the message line will be displayed either. All Oracle Forms Runform messages and custom messages would have to be displayed using alerts by coding the ON-ERROR and ON-MESSAGE triggers.
Best Regards,
Deepak Rai

Skipping beginner guide section: "disable input hotplugging". That ok?

I'm skipping the section in the Beginner's Guide called "Disable input hotplugging." Is that ok? Or should I disable it and let HAL use the settings from xorg.conf?

Ive never bothered with that and never had an issue. You can always change it if u want. All else fails, anything u do can be undone via a rescue CD.. like the arch linux disc. I used the Arch Linux CD to rebuild my kernel image on my Arch partition when I screwed up something badly with Splashy.

Disable Status Manager Approval

I Have the Task Status Manager Approval set to disabled but the person who published the project is seeing task approvals in the Approval Center. Is this the designed behavior?
The behavior I want is when someone submits their timesheet, I want it to go straight to the timesheet manager for approval.

John --
The flaw in your assumption about Project Server 2013 is that people can fill in Timesheets about task work, and then NOT have the task work update the relevant project. The Project Server 2013 system is programmed to do the exact opposite of what
you want. When a team member fills out and submits a timesheet containing task progress, the system automatically sends an approval update request to the project manager. The project manager can see these pending approvals in the Approval Center
page in PWA, where he/she can approve or reject the task updates. Once the task updates are approved, the system pushes the task update data into the project.
The only way to avoid this behavior is to capture top-level data in timesheets from your team members. By doing this, your team members can enter hours worked on the project as a whole, but not enter progress against individual tasks.
Hope this helps.
Dale A. Howard [MVP]

Disabling status message and conversion Window

Is it possible to completely disable the conversion window that appears when I want to print something to a .pdf file. I can press I button to hide the window, but have to do that every time the window appears. Also, after the document has been converted a status message appears in my task bar for a couple of seconds. I'm also interested in disabling that. Can anyone help

Hi,
I had encountered this too.
When you make a set_window_property(FORMS_MDI_WINDOW,window_state,maximize); this is not really a maximize but forms takes the whole available space of the screen. that's why your status bar is partially hidden by the windows taskbar
If you take a look at the buttons controlling the window, you will see that the button for maximizing the window is not in the state maximized.
If you click on it then you will really maximize the window and the status bar will appear normally with the taskbar under it.
If you click form minimizing the window, it will again take the whole space...
A workaround is to play with the FORMS_MDI_WINDOW width an height after you have set the window_state to maximize.
Hope this helps
Regards
Jean-Yves

Query disable status in bex query designer

hi all,
when i opened query in query designer for PA_PA cube it is in disabled mode.iam unabled to restrict or do any changes.and giving error like "the dependent objects are in different transport orders."i installed this particular queries in BI content also.please help me in this issue.
Regards
Vamshi D Krishna

Hi Vamshi,
go to rsa1 - transport connection and select ur query and drag & drop into third screen
u can see the locked request no. of ur query ..
u can take that no. and go to se03 -- give that request no. & execute unlock..
now, again come back to ur transport connection, now u can see under ur query no transport request has been assigned.. select the truck symbol..
It will ask u for the new request no. assign a new request no. of urs and check the query at the designer level. u can able to change the query ..
Hope it helps.
If u have any doubt reply to this message.
Thanks & Regards,
V. Vijay Kumar.

GPO enabe\disable status won't hold

So here's a funny yet really annoying one for you guys. I am trying to edit this "no macro warning access runtime 2003" GPO to make sure that it disables the macro message that shows up every time I open the database. Here's how the GPO looks likeI am able to enable the GPO as you an see but when I try to enable the "disable macro warning" in the next screen it goes back to disable. It'll let me change it to "enable" and hit "ok" but if I double-click it to see that the changes has been saved I see that it went back to "disable".Crazy isn't it?!?!? My DC is 2008r2 SP1One of the people who tried helping me tried re-creating this issue on a 2003 and 2012 DCs but never had an issue. Any idea guys?
This topic first appeared in the Spiceworks Community

alian wrote:
read your answer to the same question i wanted to ask. what if i am using an imac computer
For this question on the iMac I would suggest asking in the Mac Printing forum.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to disable status bar from creating a dead zone in the simulator

Is this a known bug in the simulator,where a hidden status bar is still grabbing touches? I constantly get frustrated by the inability to click at the top 20 or so pixels of the screen because that is a dead zone, and even though I have a hidden status bar the status bar is still grabbing touches there. Any way around this? And will this happen in the iPhone version, or is it just the simulator?

You have a point, if your users are filling the form in with Reader, they won't be able to save the data with the form unless the form has been "Reader Extended" (which enables this functionality in Reader for the particular form)
If you have Acrobat Pro, you can "extend" the form before you send it to the users. The following is from the Acrobat Pro help...
Enable Reader users to save form data
Ordinarily, Reader users can’t save filled-in copies of forms that they complete. However, you can extend rights to Reader users so they have the ability to do so. These extended rights also include the ability to add comments, use the Typewriter tool, and digitally sign the PDF.
1. Open a single PDF, or select one or more PDFs in a PDF Portfolio.
2. Choose Advanced > Extend Features In Adobe Reader.
These extended privileges are limited to the current PDF. When you create a different PDF form, you must perform this task again if you want to enable Reader users to save their own filled-in copies of that PDF.
Regards
Steve

Mapping Edit/diplay buttons are in disable status---URGENT

Hi Experts,
I am trying to edit the Mapping routines in production system, to actuvate the imported transports.
But Mapping Edit/Display options and button is disabled.
Please help to enable them.
Thanks in advance,
MK

Hi,
This problem comes sometimes in Dev as well when people use the JRE version above 1.4.2 or 1.3.
This might be a problem realted to java version.
In prod we never do any changes in IR I am also surprised why changes is required at IR level.
Just check the java version from help->information from IR.
it should be 1.4.2
Thnx
Chirag

Change button disable status

Dear friends
I have a inputText and one button and the button is disabled but I want to enabled it when user type a string on inputText ( Post change)
How can I implement it?
Thanks

Easiest approach is to create a valueChangeListener in a managed bean and decorate the af:inputText with the listener. You will need to set the autoSubmit attribute on the component to "true". The listener will call setDisabled on an instance of the RichCommandButton that is bound to the command button you wish to enable.
--RiC

Beginner's Zenworks - disable status

Similar Messages

Maybe you are looking for