Beginners, new users

You really must read the manual... you cannot expect experienced users to help you unless you make some kind of effort.
Unless you read the manuals you will never move beyond using and understanding 2 or 3 percent of Logic's capabilities.
Half the questions posed are unanswerable, and even if the answer is given it wouldn't help.
Logic is a deep program... it has been around longer than than many of you, show the program a little respect and read the manuals so you can ask questions that are pertinent to the problems you're having.
Also, for those of you that haven't, be sure and purchase logic... (cough)
pancenter-

Gabe Garza wrote:
Just for kicks I've used the little known "search" function on this forum and have found results to questions asked
Sounds like he's having some fun, maybe I'll riff on this too...
Searching in the Manual works for me and the results are even in yellow.
I'm sure you'll have something to say about the use of the color yellow.
Oops, I guess fun is not allowed after all.
Your response will lead people to think that searching in the forum is some how old and you shouldn't do it.
I am pretty sure people are not going to read this and think "well that guy says something about searching being arcane, which must mean archaic, so I guess I don't need to do that."
Now I know that tones and sarcasm don't come across in forums... but I don't think I could have layed it on any more thick.

Similar Messages

New user: Problems placing text over object

Hi,
I have recently started using InDesign CS5 to produce the biannual magazine for a volunteer organisation. My background is not in this area, so please excuse me if I do not use correct terminology or am asking something obvious. Having said that I have been very impressed with the ease of the programme to use for what we need.
I am having a problem with the document I am currently working in, however if I place the same elements in a different document things are ok, so I know it is something I have accidently done, but after a lot of playing around I am at a loss.
My issue is when I place an Object (a photo for the cover) and then try to place text over the top the text disappears on the object, however can be seen when you take it off it. You see the text box with the red cross mark in the bottom right corner. If you ask to "bring to front" nothing happens. Same if you try it using the photo. Oher objects (logo) can be placed on top of the photo. I have tried using Layers, but to no success.
Any help would be greatly appreciated.

Standard advice to new users. Buy a good book.
Sandee Cohen's Visual Quick Start Guide is by far the best one for beginners: http://amzn.to/czpjiq
The best $20 you'll ever spend if you want to learn InDesign.
Bob

How can I Import CA Certificate into a new user profile when it's created

I need to deploy a CA Root Certificate to new firefox user profile when it is created in windows. I Seen somewhere that you could place a working copy of cert8.db in %programfiles%\firefox-installation-folder\defaults\profile and this would get added when a new firefox profile is created. However, the profile directory doesn't exist in the defaults folder and when I created it this method still didn't work.
Is there a way to get firefox to create new profiles with preconfigured Certificates?
Right now when new users open firefox for first time it is unable to connect to any SSL sites through our proxy server until the user adds the proxies ca certificate or it gets added later via logon script (at next user logon).

Update... For anyone looking for a similar solution:
I ended up adding more to my logon script I have it check for a user's mozilla profile first and if not found it will use command line "firefox.exe -createprofile default" to make one. After that I just copy a working cert8.db to that new profile. Then when the user opens firefox for first time, it will detect this new profile, and it will load it along with the correct CA Certs intact...
Also, for existing profiles my script just uses nss certutil to add my proxy CA Certificate to the users profile cert8db.

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error when creating a new user in Data Federator XI 3.0

Hi there,
I am completely new to Data Federator so please bear with me.
I have successfully created a new user but I am not able to run the command:
GRANT EXECUTE ON PROCEDURE executeUpdateNativeQuery TO user1
as I get the following error: Incorrect procedure name: 'executeUpdateNativeQuery' (Error code: 10000)
I am following page 482 of the Data Federator User Guide.
Thanks!
Jason

>
Jason Hattrick wrote:
> I am completely new to Data Federator so please bear with me.
>
> I have successfully created a new user but I am not able to run the command:
>
> GRANT EXECUTE ON PROCEDURE executeUpdateNativeQuery TO user1
>
> as I get the following error: Incorrect procedure name: 'executeUpdateNativeQuery' (Error code: 10000)
>
> I am following page 482 of the Data Federator User Guide.
>
> Thanks!
> Jason
Hi Jason
There is a typo in the documentation, the name of the procedure is:
executeNativeUpdateQuery
By the way, you can get the full procedure list by entering the following query in the administrator
SELECT * FROM leselect.system.procedures
Hope this helps,
Fred

Error in creating a new user in j2ee 14 admin console

Hi,
I am getting the following error while trying to create a new user using the j2ee 1.4 admin console.:
A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "Unable to get View for ViewDescriptor 'fileUsers'"
The root cause is "java.lang.ArrayIndexOutOfBoundsException: 0"
Plz proide me with solutions
Regads,
Tanmoy

This problem wil happen only if you've created a user with an empty group id, and this issue is fixed for FCS .
You have two workarounds to use adminGUI for managing users:
1. Use CLI, and create a group id to this user, then you can use adminGUI.
2. Other option is remove the empty group id user from domain.xml, and then you can come back to adminGUI to create the user with some group id. I prefer the 1st option.

An Unexpected Error while creating a new user...

Hello everyone.
          Recently a customer of ours received an error while creating a new user. I believe the page bombed out on him while he was creating the user and this is the error he received:
          ============================================================
          Error opening /error.jsp.
          The source of this error is javax.servlet.ServletException: Cannot find message resources under key org.apache.struts.action.MESSAGE at weblogic.servlet.jsp.PageContextImpl.handlePageException(PageContextImpl.java:323) at jsp_servlet.__error._jspService(error.jsp:17) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.wlw.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:120) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:408) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:106) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:512) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._kichler.__adminpagelayout._jspService(adminpagelayout.jsp:15) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:321) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:184) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:767) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:135) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
          Caused by
          javax.servlet.jsp.JspException: Cannot find message resources under key org.apache.struts.action.MESSAGE at org.apache.struts.util.RequestUtils.retrieveMessageResources(RequestUtils.java:1103) at org.apache.struts.util.RequestUtils.message(RequestUtils.java:1043) at org.apache.struts.taglib.bean.MessageTag.doStartTag(MessageTag.java:294) at jsp_servlet.__error._jspService(error.jsp:14) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.wlw.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:120) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:408) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:106) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:512) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._kichler.__adminpagelayout._jspService(adminpagelayout.jsp:15) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:321) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:184) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:767) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:135) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
          ==========================================================
          Here is the error that I have found in the logs.
          ==========================================================
          ####<Jan 26, 2006 10:49:40 AM EST> <Info> <Usermgmt> <clv1upw02> <DealerManaged2
          > <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <weblogic> <BEA1-1E
          26AFA61CCE> <BEA-402301> <User [email protected] was created with prof
          ileType null>
          ####<Jan 26, 2006 10:49:40 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
          yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
          sp.>
          ####<Jan 26, 2006 10:50:33 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '10' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
          yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
          sp.>
          ####<Jan 26, 2006 10:50:45 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '10' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
          yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
          sp.>
          ####<Jan 26, 2006 10:52:32 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '9' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsupply
          inc.com> <> <BEA-423137> <There was an error loading the requested URI /error.js
          p.>
          ####<Jan 26, 2006 10:52:53 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '9' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsupply
          inc.com> <> <BEA-423137> <There was an error loading the requested URI /error.js
          p.>
          ==========================================================
          Now the weird thing is this. He got this error, and the user WAS STILL added to our user lists. This doesn't happen all the time, as in the logs he created a user minutes before this one and he did not receive any errors.
          This is just something that we do not want to have happen. Does anyone have any idea of what may have caused this and what I can do to prevent this from happening again.
          I cannot find any info on this BEA-423137 error anywhere on the site and I was wondering if someone would be able to help me out.
          Thanks,
          Garret

Nevermind everyone. I figured out that I can do a manual change and just add the user to one of the groups and everything should be ok. Something happened silently within the system that caused it.

Unable to upgrade iTunes 10.1 or add new user

I have iTunes 10.1.0.56 installed on a Windows 7 PC. Whenever I try to upgrade to any newer version, the installation stalls. The dialog box says that the program is trying to use a resource that is unavailable, then it prompts me to try to find the folder containing iTunes64.msi, which is the installation program itself. One of the suggested locations is "C:\Program Files (x86)\iTunes\iTunes.exe"; another is C:\Program Data\Apple Computer\Installer Cache\iTunes 10.1.0.22\ which was probably the first version I loaded after I bought the PC. I have tried over-writing the version number; I have also found temp folders in cache from previous upgrade attempts, but none of those folder names work. I keep getting the message that (whatever) is not a valid installation package. Eventually I have to cancel the upgrade.
iTunes works fine for me and my children on our respective user profiles. We all have iPods and used iTunes regularly. My wife up to now is a non-iTunes user but she just got an iPod Classic for her birthday. However, when she launches iTunes from her profile, the installation program launches and then stalls with the same error messages as above. So she can't use iTunes and without having her own iTunes account, her iPod is useless.
I have seen this problem or similar issues discussed on other boards, mainly involving older versions of iTunes and/or Windows. I have pretty much the latest of both but can neither upgrade iTunes or set up my wife as a new user. Can somebody out there help me?? Thanks!

I also encountered the same problem.
and yes, I uninstalled and reinstalled itunes 10.1.1 bla bla blahhh....
Same issue!!! itunes cannot open cuz the mobile device support not started etc..
but when reinstalled prior itunes version 9.2 its gone
and issue fixed.
i can sync my 3G.
but not my 4G. it says you need to upgrade to 10.1 or above
spending the whole night to fix the problem which never occured b4
i finally find out one thing.
pl keep in mind im not a computer exprt
i tried this and it worked, i don know what fixed it, bt it works
try this at your own risk. some comp genius will tell us weather this way is right or not.
ok. lets start...
in your desktop make a new folder. name it Kmh_\CoreFP
try uninstalling the newer version 10.1
only the itunes not other mobile div suprt, application suprt etc.
dont mind the following order:http://support.apple.com/kb/HT1923
and reinstall itunes 9.2
go to C:\Program Files\Common Files\Apple
you wil find a folder named "CoreFP"
copy it and paste to Kmh_\CoreFP
uninstall itunes 9.2
and reinstall itunes 10.1 again
go to C:\Program Files\Common Files\Apple
you wil find folder named "CoreFP"
find the difference in properties comparing the one u stored in Kmh_\CoreFP
ok delete it and replace it with the one we stored stored in Kmh_\CoreFP
restart the computer and start itunes now
what happens?
best of luck.
-Kmhm63
reinstall the newer version 10.1
I would suggest that you revert back to prior working version until Apple comes out with an update that fixes what 10.1.1 broke.

How do I permanently STOP the Bing Suggested Sites icon from being in the IE 9 toolbar for everyone and make it the default for all new users

Non of the other post on this subject were correctly answered and they are now old so here is a new thread for a question that a Microsoft Engineer should have answered a long time ago in one of the other threads.
I have IE 9 installed.
I am setting up my default profile which will be used for ALL users to configure their profile when they log on. All profiles are destroyed on system reboot. All PCs are frozen.
Every time I log in as a new user and open IE 9, the favorites bar shows up as I want it with NO BING Suggested Site crapware in site. Then about .5 secs after IE starts and the Favorites bar is shown, the EVIL "Bing Suggested Sites" button appears.
I can delete it and it seems to stay away until I delete the users profile folder etc and have them log in again. When the profile is recreated the Favorites folder does not have a "Suggested Sites" option in the c:\users\username\favorites\links"
folder. (I have deleted the hidden .ini files in the default folder) Nor does one exist in the "c:\users\default\favorites\links" folder from which the newly created user profile folder comes. But as soon as I start IE 9, one is created and placed
in the users favorites links folder. This MUST STOP!!!!!!!!!!!!! This is UNACCEPTABLE. AND IT MUST BE STOPPED!!!!! Where in the Windows 7 x64 Enterprise OS is the location of this evil action and how do I PERMANENTLY delete it.
I don't EVER want to see the EVIL BING Suggested Sites button anywhere on the PC especially in the Favorites Tool bar on IE 9. An I expect/demand that Microsoft tell us how to 100% cannot fail get rid of it for ALL USERS FOREVER NO MATTER WHAT!!!!!!!!!!!! I
have spent a lot of time perfecting my default profile making sur that ALL options are decide by me NOT MICROSOFT. I NEVER USE SYSPREP as that will destroy ALL custom defaults every time.
When a user logs in in to one of my PCs and they start IE 9 they get REAL Google for the default search engine, not the version Microsoft will give you which first sends all search requests to Microsoft so they can spy on what you searched in Google for etc.,
but real Google, not sent to Microsoft 1st. (I'll bet more than 90% of the readers of this site did not notice how if you let Microsoft set your default search provider to Google, they fix it so that all search requests go to Microsoft 1st, before it gets
sent to Google. Look at the search string under manage your search providers, in IE 7 & 8. In IE 9 it is hidden, but still there. HOW EVIL OF MICROSOFT)
With my default profile IE does not ask how you want to set it up, I have already made those decisions. I have made all those decisions for my users. But as of recently I have started installing IE 9 and now this unacceptable BING Suggested Sites junk ware
keeps showing up. HOW DO I STOP IT. Do I have to put a line in my HOSTS file to send all request for Bing.com to 127.0.0.1 just to make sure that it can't be used. There by removing all possibility of my users ever being able to use Bing FOREVER.
I would rather not do that but unless a Microsoft representative will tell me how to keep that useless Bing Suggested Sites button from appearing on the Favorites tool bar I will have to. I would love to let my user decide if they want to use Bing and waist
their time trying to find good search results, but I will not have it forced on them and I will not allow it to be on the Favorites tool Bar ever. So will a Microsoft Engineer please tell us how to put a permanent end to the "Bing Suggested Sites"
button for ALL users ALWAYS FOREVER.
Thanks,
Ralph

Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

New User cannot access OWA after migrate from Exchange 2007 to Exchange 2013

Dear all,
I recently migrate the Exchange server from Exchange 2007 on Windows Server 2003 to Exchange 2013 on Windows 2012 R2. I can open the mailbox moved from Exchange 2007 without any problem. However when I created a new user in Exchange 2013, the user cannot
login the OWA, the browser will throw out following screen. Can anyone help me in this case. Thanks a lot!

Hi Winnie,
Thank for your reply. Below is the result, please note there has four exchange servers, HKAD and HKEX are the existing Exchange 2007 server. HKCAS1 and HKCAS2 are the new Exchange Server 2013 - both of xchange server 2013 are using owa.ksi.com.hk
as the external URL.
Identity                      : HKAD\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkad.ksi.com.hk/owa
ExternalUrl                   :
Identity                      : HKAD\Exchange (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKAD\Public (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKAD\Exchweb (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKAD\Exadmin (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkex.ksi.com.hk/owa
ExternalUrl                   :
Identity                      : HKEX\Exchange (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\Exadmin (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\Public (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\Exchweb (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKCAS2\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkcas2.ksi.com.hk/owa
ExternalUrl                   :
https://owa.ksi.com.hk/owa
Identity                      : HKCAS1\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkcas1.ksi.com.hk/owa
ExternalUrl                   :
https://owa.ksi.com.hk/owa

Step By Step Instructions !!!! HELP NEW USER!

Step by step tutorial on how to create a project from A to Z. I am a new user, and i am tired of all the tutorials NI provides, they all talk about creating some bullshit waveform or making some easy calculator vi. They never talk about the real stuff, example, how to start a project, create your vi, compiling or putting together all the vi's, compile everything together and than creating an EXE. Holly shit that's all i am asking for is an idiots guide is it that hard for NI to make ! Can anyone out there direct to something to figure this out maybe a book, article, web page something!!! And no thank you i don't need some sales guy calling me trying to sell NIN bullshit training classes, i have been to them and all the instructor could talk about is creating a ridicolous sine wave genarator (WoW)

I am sure NI would be very happy to hear about any issues with the LabVIEW help that could be confusing to new users.
Here's a link to the LabVIEW help on organizing an managing projects:
http://zone.ni.com/reference/en-XX/help/371361D-01/TOC16.htm
Have you read it and do you still have problems? What was not clear?
Genci wrote:
..., compile everything together and than creating an EXE.
How to built an application Step by step.: http://zone.ni.com/devzone/cda/tut/p/id/3303
You should also be aware that you cannot buit an application using LabVIEW base or full.
You need LabVIEW professional or you need to purchase the application builder.
Genci wrote:
...tired .. bullshit ... Holly shit ...idiots ...bullshit ..ridicolous ...
These are all non-techical terms and not very descriptive in the context of LabVIEW. Could you be a bit more specific on what kind of problems you encountered?
It would also be important to know your programming background? Are you experienced in any other programming environment? Is labVIEW your first attempt at programming? Are you familiar with general programming terms? Are you trying to program for personal enjoyment, for school, or as part of a job. If your employer forces you to switch to LabVIEW, maybe he could send you to some NI classes.
What is your LabVIEW version?
As anything, there is always an initial hurdle that needs to be overcome before becoming familiar in a new environment. Fortunately, this threshold is very low in the case of LabVIEW and you should be up and running after a couple of hours. Mastery takes a bit longer, of course.
Your best bet is to ask a more specific question here in the forum whenever you get stuck. Good luck and enjoy the ride.
LabVIEW Champion . Do more with less code and in less time .

MF Crashes on startup, but works in safe-mode and for a few minutes after making a new user, can anyone help?

After troubleshooting for a few hours, I still cannot find a proper solution. Effectively, I learned that if I create a new profile user, with this command in windows Run: "C:\Program Files\Mozilla Firefox\firefox.exe" -p , I can open the user profile menu manually, and create/delete a new/not-new user, and upon creating and using a new one, it works fine. For a couple of times opening the browser, anyway, in which it results in the same problem as before. I took a list and compared the old files to a brand new users files, and did find some differences. Take these into effect,
The compatability and extensions .ini files were differed by 3 kb , with a new user being 1, and the old user being 4.
The Local Store .rdf file differed from 2 for a new user, to 4 for an old user.
The Mime Types .rdf file differed from 3 for a new user to 4 for an old user.
Plugin Reg(istry?) .dat differed from 17 new to 20 old.
Search.json differed from 13 new to 16 old.
Search Metadata.json differed from 1 new to 4 old.
URL Classifier Key 3.txt differed from 1 new to 4 old.
Web App Store.sqlite differed from 96 new to 128 old.
(All units are KB)
Seeing as a few articles relating to the problem are "no longer maintained" and the solutions work only temporarily, I came here hoping to fix this little issue. Thank you, and good luck in advance.
-Av
Note; the first crash ID is for the new user that crashed, the last is for an old user.

I see.. I have heard rumors of this, but it did not occur to me that this would literally crash upon startup. Thank you for the help, Edmeister. Will check as "solved it" if it works. Thanks again!

Why does Calendar sync with Google on a new user, but not my original one?

I have a late 2012 Macbook Pro that came running Mountain Lion out of the box. I have used Mail and Messages with my various Google accounts since I purchased it, but never Calendar. When I checked the Calendar option all I got was the header for where the calendars should be.
I cannot see any calendars on that account, create/view/edit events, or anything. My sync settings on the Google side are just fine as it works on other devices. Last night I took it a step further and created a new user account on my laptop and first thing I did was connect my Google account. Everything worked.
I have tried deleting the Calendar cache files, preferences, accounts, and pretty much anything short of the app itself. I even went ahead and cleared out my Keychain of anything relating to that account or Google in general. As a last ditch effort, I did a full clean up and reset of the SyncServices system.
Short of painstakingly comparing the two accounts I have no idea what could be causing this problem. There are no user specific applications or extensions running on my machine, and I've performed no "under the hood" tweaks to Mountain Lion.
Does anyone have any idea where I should be looking for a cause? I haven't found anything like this problem online yet, and I definitely don't want to migrate my stuff to a new account.
Key points:
Google Calendars do not sync at all to my primary user account.
I've tried multiple Google accounts.
Only a new user account in Mountain Lion is able to connect.
All SyncServices files and all Calendar files have been wiped and recreated to no effect.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Cannot log in to new user accounts

I am a long time Apple user and am completely confounded by a problem I am having creating new user accounts on my G4/400 PowerMac running OX 10.4.11. I've been attempting to setup some user accounts for my kids to use. I have no problems setting up the accounts but when I log out of mine and try to log in as them the login window shakes from side to side indicating an incorrect password. This is something that I had a problem a year ago and never solved and today I am trying once again with out success. I feel like I am doing everything correctly since I've been able to do this on my G3 iBook and MacBook.
Here are a few things I've also done.
-repaired permissions on the drive ( I have 2 in the machine right now but the other is just my iTunes LIbrary drive)
-deleted the old user accounts that I setup but couldn't access.
-tried setting up more new accounts
-repeated the process several times without ever being able to successfully login to any of the new accounts that I created.
Any advice to solve this problem would be appreciated.
Thanks
Chris

Hi cc_mac,
I don't know if you have solved this one yet, but I had exactly the same issue when I recently had a hard drive failure and had to re-install everything. I had copies of all my files, but when I went to set up the user accounts, I could create each account, but I couldn't log in.
There is a simple solution, you will need to be in an admin account and you will need to use the command line, so open up a terminal window.
Use the following command for each account you need to fix:
sudo passwd <username>
where <username> is the account name that you cannot currently log in to.
You will need to enter your admin password to allow you to use sudo, so do that. Then you will be asked to type in the new password for the new account. Just to be absolutely sure, you will be asked to re-enter the new password, so do that, and you are done.
Log out of your admin account, this should bring you back to the log in screen. Now, if everything has gone according to plan, you should have an operational user account.
I'm not sure what the cause of this issue is but it might be some sort of permissions issue happening in the background. Nevertheless, manually setting the password this way seems to have fixed it for me. I sincerely hope this helps you too.
Kind Regards,
Mark D.

Beginners, new users

Similar Messages

Maybe you are looking for