Beginners Q: Motion tracking - Cannot move trackpoint

Hi all,
this seems to be simple: start motion tracking, move your trackpoint to the correct place that needs to be tracked.
Problem: I see the trackpoint, but cannot move it to its place.
The only way to do that, is to close AE, reopen AE & reopen the project, and continu moving the trackpoint.
This is only possible to do so for a few frames, then the trackpoint is fixed again, and moving is not possible anymore.
This topic seems not to be found on the internet, so I suspect a bug maybe.
Please help, it's driving me nuts...
any help is welcome...
-Edit1-
And as I saw an OpenGL error I'm providing also system info below.
SW:
AE CS6, trial version, no extra's installed. ver. 11.0.0.378
Windows 7 Home Premium, SP1, build 7601, 64bit
Driver pack ver. 8.98-120611a-141402C-ATI
2D driver ver. 8.01.01.1253
OpenGL ver. 6.14.10.11733
Direct3D ver. 9.14.10.0920
Catalyst Control Center Ver: 2012.0611.1251.21046
Used Render Multiple Frames Simultaneously multiprocessing: With & Without.
HW:
16Gb Ram
i7-3770K CPU @3.5MHz, 64Bit
Graph Chipset: AMD Radeon HD 6800 Series
-Edit2-
The more I mess around with it, the more I see the proof I need to restart AE to continue follow the same actions as in tutors over the net.
VERY often, I cannot move object with the mouse cursor like text objects for instance.
Is there anything I can do??

Hi thx for replying,
If I remember well, the error message was a general OpenGl one.
I did have the error message not that often unfortunately.
Graphic card is updated to latest version.
It's very annoying I cannot drag&drop after a while...

Similar Messages

Motion Tracking - Match Move, getting messy edges around superimposed video

(Motion 3.0.2)
I'm using the "Match Motion" menu option under "Motion Tracking" - "Add Behavior" to superimpose a video over a flat screen in the shot. This is working great except for one issue. Around the edges of the super imposed video there is a flickering light that persists. NOTE: The flat screen does display a basic white graphic on it and initially it seemed as though this was leaking through. However, I'm not convinced this is the case as I've stretched the four corners well beyond the underlying white screen and the problem persists.
Pretty sure I went through the proper steps, i.e analyze etc. and the superimposed video does play fine, just the edges are not very clean.
Any feedback would be appreciated.

Thanks, I did set the "Render" to "Best", hit Analyze again, saved the file, went back to my FCP project which contained the file/clip, had to render again.....but got the same results, might be a touch improved, can't really tell. Maybe I'll start over and just cover the entire flat screen tv w/ the video to ensure that none of the white image from the tv seeps around the edges??

Motion Tracking - Match Move

It's yet not possible to send a clip from FCPX timeline directly to Motion 5.
If I want to use "Analyze Motion" and "Match Move" everything must be done manually, what is a pain in the ???.
No workflow at all.
Does someone has a workaround, if I want e.g. to make a Title "Match Move" to a previously "Analyzed Motion" of a clip directly from FCPX's timeline?

Thanks, I did set the "Render" to "Best", hit Analyze again, saved the file, went back to my FCP project which contained the file/clip, had to render again.....but got the same results, might be a touch improved, can't really tell. Maybe I'll start over and just cover the entire flat screen tv w/ the video to ensure that none of the white image from the tv seeps around the edges??

Motion 3 - Motion Tracking and Match Move

Hi, I have no problem learning how to use motion tracking or match move because there's plenty of tutorials online. My question is, if let's say i motion tracked a clip to my original clip and half way through the movie an obstacle comes into the position where my motion tracked clip is. How do i make is so the obstacle appears in front of the motion tracked clip?
For example, take apple's motion 3 sample video.
http://www.youtube.com/watch?v=BwezKN_hFF4
The place where they put the GPS clip, if while the girl is driving she moves her hand in front of the GPS. How would we make it so that her hand appears in front of the GPS not behind it?
Any help would be appreciated,
Thank you

If I am understanding you correctly, it sounds like you are asking how to have an object that is part of the background layer appear in front of an object that you are going to composite in an match-move.
The only way to do that is to duplicate the background layer and move it in front of the layer you are bringing in, then create a mask around the portion of layer you want to keep (in the example you provide - the girl's hand).
You would have to go frame-by-frame and animate the mask to follow her hand - very time consuming but I don't see any other way.

Cannot move audio track

i imported a video (WMV) in Premiere Pro CS4 and first thing: it placed the audio track on track 5... i cannot move it to 1 as i woild have expected it to go from start...
as i import images only for video layers, there is no issue.
But now i need to place additional audio (only) tracks and they cannot be placed on other tracks: instead it goes on track 5 and just replace that section!
what have i done (forgot, involuntarily set, or else? )
This is the first project since i had to reinstall the entire CS4 PROD PREMIUM suite after a clean install of Windows. I don't think i ever had this issue before...
Thanks for your help,
Rob

Yes, one limitation of PrPro's Track setup is that one cannot just click+drag on a Track, to move it up/down, like most DAW programs allow. Instead, we do a little "dance," as you did - Remove Unused Tracks, then create New Tracks, where, and as is required.
One can set up a default Track structure, that will create what you want, when starting a New Project. My customized default is 3 Video Tracks, 2 Mono Tracks, 4 Stereo Tracks, and the Master is usually 5.1. As I seldom need a 5.1 Track (other than the Master), I do not include any, but can add them, if needed.
One neat feature of PrPro, as it does need channel-counts to match, to be used, is that if one had, say 2 mono tracks only, and then had a stereo Clip, if that is dragged to the Master (it will not go onto the Master), PrPro will then create a new 2-channel stereo Track for that Clip.
Good luck, and glad that things are working for you. You might want to give some thought to that initial Track setup, and make any changes, based on the majority of your Projects.
Hunt

Adding motion tracked effects to a complete movie/sequence, on multiple subjects throughout the timeline

Hi all,
I am completely new to After Effects and have just completed my first 15 minute movie in Premier Pro (CS5). This movie is very important to me and encroaching a deadline. I wouldn't reach out with such a beginner question otherwise, so any assistance would be greatly appreciated.
Problem -
I have an exported 15 minute .mov file created in Premier Pro.
I want to apply a liquify effect to a moving target - eg. a person for only parts of the movie.
I can successfully motion track and apply the effect, however when the scene changes within the clip and the person leaves the frame, the motion track continues and the effect is applied throughout the remainder of the footage on everything else that comes into view.
I want the motion track to stop once the body is out of the frame, and then to begin a new motion track later when the body reappears, or when I want to apply an effect to a different object along the timeline.
Have Tried -
Importing my Premier Pro project into After Effects.
Result - The motion track stays on screen from clip to clip, throughout entire sequence
Copy and pasting a short clip in order to add an effect only to the single target.
Result - The motion tracking is greyed out, and if I double click on the clip, it takes me to the entire piece of footage it's cut from, which bring me back to my original problem
Please let me know (from the very basic starting point) how you would do this? Is there any way to stop and start the motion track linearly along the timeline in different positions, and apply different effects?
Thank you in advance.
Ally

Todd's right; without a basic understanding, it's going to be hard to help you.
However, I can try.
Instead of bringing your whole video into AE. Just copy the clip in Premiere that needs the effect and paste it into a composition in AE. Trim your composition so it's just that clip. Follow whatever tutorial you followed to get your effect done (I'm assuming the Demon Face Warp from VCP) and render your video out of AE. Then simply plop that clip over the original clip in your Premiere timeline.
But seriously, you will save yourself much hassle if you go through all the resources Todd linked to. AE is a pretty powerful and complicated program. It's not something you can learn in a day, so charging forward into it will only cause frustration.

How do I motion track just like the Plugin CameraTracker 1.0?

On the plugin CameraTracker, it automatically detects points that can be motion tracked, and it does it very well. What got me thinking, is that it also carries on tracking when a tracking point goes out of screen.
Here's an example:
I am using CameraTracker. As you see, this is the beginning of the clip, and what happens in this scene, is that the camera just fly towards the jungle.
If you see "Hehe", there's a green cross, and that is where the "Hehe" is tracked to. That red box is the null object.
Okay, so when the camera is flying towards the jungle, it passes that green point. And as it passes, it does not stuff the "Hehe". That "Hehe" stays in place as if it was in this Minecraft world.
It says in place, even though the cross has gone out of place.
BUT, if I use the Adobe After Effects built in motion tracking, and just want to select that point where the "Hehe" is, and I begin tracking, it goes pass then green cross, then that tracking box goes everywhere.
How do I do this so it's like CameraTracker? I want to do this using the default After Effects Motion Tracker.
If you cannot understand what I'm trying to explain, let me know what part you don't understand.
thanks.

Could you give me an example of "where you stop the track then move the track point to another spot in the image", using my picture?
What's the difference between CS6 Camera Tracker, and CS6 Motion Tracker?
And for the Camera Tracker plugin, I can only seem to track ONE part. If you see the image, the words are like in one part of the scene. If i were to put a word in a tree, it would look stuffed up. The word wouldn't be tracked onto the tree. It would be tracked on the sand instead.

Where is the "Motion Tracking Mode" button in PE11?

In PE10 by clicking "Motion Tracking Mode" button i can add a tracking object and click "Track button" to create keyframes. Cannot find this function in PE11. Actually i need to blur patient's eyes and nose. The goal is to show lips and neck movement but hide the personality. To create the keyframes manually is very labor and time consuming. Thanks. MT

It looks like you and I have posted much the same question within minutes of each other.
I have read elsewhere that "Motion Tracking" was abandoned as being "all but useless" in this release.
http://forums.adobe.com/message/4749955#4749955

Need Help With Motion Track/Camera Tracking

I've been trying for several days to motion track 2 seconds worth of footage but I cannot get it. I've tried the AE motion track, 3D Camera Tracker, Mocha Pro, Camera Tracker from the Foundry, Boujou (could be user error with that though, cause I had never used it before), but I cannot get this shot figured out. Test - YouTube here is a link to the footage, I'm trying to track from frame 183-235 (where the guy is kneeling down in front of the box holding dynamite and everything is black and red)
Any help would be great, all I want to do is have an image attached to one of the boards in the background so it doesn't move.
Thanks!

Wow you have boujou? Thats awesome $10k, anyway looks like mocha should be fine for this as I don't see a ton of camera movement in that shot where you want to track. Do you know how to use mocha? If not there are tuts while working on that scene. Here's a few http://cgi.tutsplus.com/articles/advanced-motion-tracking-with-mocha-ae--ae-15231 and for various tracker apps including the built in one http://cgi.tutsplus.com/articles/26-tracking-and-matchmoving-tutorials--ae-7394

Possible to do the 3d motion tracking text in video with only adobe products?

I am very interested in doing some 3d text in some video with motion tracking, such as you see in the opening shots in the show Fringe.
You will have a scene of maybe a street in the city, the camera is looking forward and moving, you have 3d block text that seems to be just hovering there up off the ground but looks like a real physical 3d object in the shot as the camera moves around.
I have been looking up tutorials for this in After effects on youtube but they always use other non adobe products as well such as boujou or 3ds max, I am wondering if it is possible to make the same shot with only adobe products. If so, what whould I use other than after effects. And lastly, can anyone point me to a good free tutorial using only adobe programs if there is one out there?
I have seen one video of someone adding text to a moving video but it was flat or plastered onto a wall and not the nice block letters that look like a sculpture in the video.
Thanks.

I am wondering if it is possible to make the same shot with only adobe products.
No, you can't and that settles all your other questions. For tutorials, refer to VideoCoPilot's matchmoving and set extension stuff, but even then you will need to at least use some comemrcial third-party plug-ins.
Mylenium

Using Windows 8 64 bit Premiere Elements 12 , motion tracker gives me the folloing error; The media file seems to have an invalid entry in the catalog, please rename it for use.

I'm trying to put a graphic over an object, but I keep getting this error message; The media file seems to have an invalid entry in the catalog, please rename it for use.

Lonesomeless
Thanks for the reply.
I checked the link that I posted back in post 3 of your thread. It is working with at least Firefox and Chrome.
ATR Premiere Elements Troubleshooting: PE12: Motion Tracking/What To Use To Track Object?
What browser are you using?
The blog post contains significant information related to Premiere Elements 12 Motion Tracking. But, if you cannot access it for some reason, then we will need to troubleshoot via communications in the thread.
SG has asked if you are able to create Motion Tracking effect using one of the graphics included with the program. We will watch for your response to him on that question. Please include in your message to him whether you can obtain your file to track the object using Organizer Tab or Project Assets routes as well as Graphics Tab.
The following is an excerpt from the blog post referenced....
SOLUTION
Various tutorials and online comments have pointed to places other than Graphics Tab where objects can be selected and used to track the moving object in the video when the Motion Tracking workspace is opened in the Expert or Quick workspace.
Organizer Tab, Expert or Quick workspace to access Elements Organizer 12. Cascade Windows and drag a video or photo from Elements Organizer into the yellow track box of Motion Tracking workspace.
Project Assets, Expert workspace. Drag text, video, or photos from opened Project Assets into the yellow track box of Motion Tracking workspace.
Graphics Tab, Expert or Quick workspace. Create a png file (graphic) or prtl file (text) and place it in Clip Arts in the Program Files of the program to have a permanent resource. Then from Graphics Tab, drag the newly created graphic or text object into yellow track box of Motion Tracking workspace.
Thanks.
ATR

Motion tracking effect mask not working

I've no trouble with normal motion tracking, adding clip art to it and having the clip art track, etc. But according to the help in PE8, effects masks are also supposed to be able to be used. According to help:
You can also apply Effects Mask in the Motion Tracking mode.
1. Select a clip in the Timeline or Sceneline.
2. Select the clip, and click to enable the Motion Tracking mode.
3. Select any one of the tracked objects (shown by a yellow frame).
4. Select Edit > Effects.
5. Drag the effect you want to apply onto the tracked object on the Monitor panel.
The Effects Mask is applied automatically and the mask moves with the moving object. If you apply multiple effects to the clip, all the effects use the same mask.
I've done that and I get a mask but it does not move with the tracked object. Any hints?

I've no trouble with normal motion tracking, adding clip art to it and having the clip art track, etc. But according to the help in PE8, effects masks are also supposed to be able to be used. According to help:
You can also apply Effects Mask in the Motion Tracking mode.
1. Select a clip in the Timeline or Sceneline.
2. Select the clip, and click to enable the Motion Tracking mode.
3. Select any one of the tracked objects (shown by a yellow frame).
4. Select Edit > Effects.
5. Drag the effect you want to apply onto the tracked object on the Monitor panel.
The Effects Mask is applied automatically and the mask moves with the moving object. If you apply multiple effects to the clip, all the effects use the same mask.
I've done that and I get a mask but it does not move with the tracked object. Any hints?

Is there a good motion tracking plug-in for FCP-X?

The question is in the headline: Is there a good motion tracking plug-in for FCP-X?
You know, like when I want to blur out, say, a license plate number on a moving car.
I know of no plug-ins for FCP-X that will do this. Surely there's one out there.
And since you can't just export a sequence to Motion (like you could in FCP 7), how would one achieve this in FCP-X?

R&B wrote:
… And since you can't just export a sequence to Motion …
instead of selecting a clip or sequence in FCPX, you set the in/out points in the Export/Send it to Compressor dialog.
the exported mov can be tracked in Motion5 …-
aaaand finally re-imported into FCPX.
… not exactly as convenient as in the old FC/p , but the tracker in M5 offers, imho as a hobbyist, superb results.-

3D Motion Tracking Error/Crash in progress [Urgent Help Please!]

Hey there!
I'm an video editor and I use 3D Motion Tracking a lot but recently every time I use it, it comes up with an error and says crash in progress,
It never used to do it and I can't seem to find any solutions to fix it.
Computer Specs:
Manufacturer: Toshiba
Model: Notebook
Processor: AMD E1-2100 APU with Radeon(TM) HD Graphics 1.00 GHz
Installed Memory: 4.00 GB (3.45 GB Usable)
System type: 64-bit Operating System, x64-based processor
So here's how I get to the problem. (I'll try provide as much detail as possible)
I import a mp4/avi file into After Effects,
Create a new composition with:
1280 x 720 (16:9)
Frame Rate = 30
Duration = 30 seconds
Resolution = Third
Advanced
Renderer = Classic 3D
(Boxes Underneath all unchecked)
Options:
Shadow Map Resolution = Comp Size
Motion Blur:
Shutter Angle = 180 Degrees
Shutter Phrase = -90 Degrees
Samples Per Frame = 16
Adaptive Sample Limit = 128
   3. Drag the mp4/avi into the composition to use it. (1.21 Seconds Long)
   4. Right click on it and go to Effect > Perspective > 3D Camera Tracker
   5. The 3D Camera Tracker initializes with these settings:
Shot type = Fixed Angle of View
Show Track Points = 3D Solved
Track Point Size = 100.0%
Target Size = 100.0%
   6.   Loads Frames 0% > 100% then as soon as the orange line shows up with Solving camera it shows this,
   and when I click okay it shows this,
   and then finally this,
   and then it crashes. that's the same process every time and it still comes up with this.
   Help would be appreciated !
   Thank you !

Try rendering an image sequence from your original footage then load that into AE and Camera Track the image sequence. Use the AME to or AE to render a JPEG or PNG image sequence:
It's important to know that some footage cannot be Camera Tracked. In order for camera tracking to work there must be a significant amount of fixed geometry in the scene. For example, if you have a shot of open water like this it cannot be Camera Tracked:
This shot also cannot be camera tracked successfully because most of the frame is moving:
If transcoding or converting the shot to an image sequence does not fix the problem and you don't get a frame rate mis match warning then you could have possibly not given enough memory to other applications in you memory and multi processor settings. Keep memory allocation for other apps in even numbers and make sure that you have not starved the dynamic link server that does camera tracking. If you have the memory 4GB to other apps is absolutely the minimum. If you only have 4GB then give 2 to AE and 2 to other apps.

Help with Motion Tracking and Masking?

Hi. First and probably only post here. I've got a bit of an issue....
I'm trying to create "snapshots" in my video that are created from masks which are then motion tracked and remain stationary. Here's a video of what i'm talking about... http://www.youtube.com/watch?v=9OhVAduuJc8
The problem I'm running into is that after i motion track the layer, select a null object as the target, duplicate the video layer, mask the object, freeze frame, and pair it to a null layer, the object does not remain stationary as the ones in the video do. Instead it moves WITH the null object and I cant figure out why. I've gotten a tutorial from the guy who made the video, however it's private so i don't know if you guys will be able to see it. http://www.youtube.com/watch?v=zY0QLrMCcGM
Either way, i followed the tutorial exactly and still to no avail. Are my settings messed up or what exactly is going on? Ive successfully done this project before but now that i'm using CS5, i'm running into these issues. If anyone has any advice i'd gladly try it out and return with the results.
Thanks so much for trying to help me out.

Yeah the null is still moving. Will freezing it lock the mask into place while still allowing the footage to play through? And how would i go about "freezing the null"?
I just dont understand how this person does it in the tutorial, and the mask remains in place. I know you probably can't watch the tutorial cause the user has it set as private, but as far i know his mask stays in place, but uses the null (while still moving) as a tracking device to keep the mask from floating out of control as the camera moves through the shot.
Sorry if I'm making this rather confusing. It's difficult to explain.
Maybe it might be easier to explain how you would obtain the result from the video I've posted? Keep in mind I dont have CameraTracker.

Beginners Q: Motion tracking - Cannot move trackpoint

Similar Messages

Maybe you are looking for