Beginning a Conversion Project: Hi8 to Digital

Guys,
I am just beginning a conversion process. I am starting with iMovie HD 5.0.2 (111). I have about 75-100 tapes to convert. Some with small amounts of video per tape to others with over an hour per tape.
I am using a Dazzle Hollywood DV-Bridge with standard RCA cable? (The cable with red, white, and yellow tips) connecting the camera to the bridge. I am using a firewire cable to connect the bridge to my Mac.
The camera and bridge also have s-video plug ins that I am not using at present. Would I get any beter quality by improrting using s-video?
I would like to import the tapes and save them as raw footage for later editing. I will probably convert each raw file to iMovie for archiving also.
The raw files I have created are very large. 250 MB to 29 GB.
Questions?
1. Is there any advantage in moving to iMovie HD 6? Or any other conversion program?
2. Is there any way to backup/archive a raw file that is 29 GB to a DVD ?
3. Using my present equipment, what type of external storage device would you suggest? I like the spped of Firewire 800. I am looking at OWC's Mercury Elite AL Pro drives. Your thoughts?
4. If you were to start this project from scratch, what equipment would you use?
Thank In Advance For Your Assistance,

Would I get any beter quality by improrting using s-video?
Do a test, but I believe with Hi8 input s-video is better. With VHS input I have found not much difference and AFAIR composite video was minimally better (AFAIR s-video was TOO crisp and had some minor artifacts). YMMV.
1. iMovie 6 has fewer bugs compared to iMovie 5 but this is not a significant difference.
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6bugs.html
http://www.sjoki.uta.fi/~shmhav/iMovieHD_5bugs.html
iMovie 4 lets you trim the clips but this is also possible with iMovie 5-6 by exporting selected clips to Full Quality DV.
2. Archiving to DVD is slow and clumsy and needs a backup program that can span huge DV clips to multiple DVDs. I'd suggest using large FW drives instead:
3. WiebeTech ComboDock lets you treat large ATA drives like large floppies via FW. It is somewhat pricey but I have used it with good success and recommened it for huge DV backups! I also have a OWC Mercury Elite Pro for daily use and iMovie project backups. I have a few loose 250 GB Deskstars for the WiebeTech and one inside the OWC enclosure.
I prefer FW800 over FW400 because it is slightly faster. USB2 might sometimes also be nice although in practice I have used it only to test that it works...
BTW, I archive all my edited footage as up to 9 min 27 sec .dv clips on the few Deskstars in the closet. With the WiebeTech it is VERY fast to retrieve the clips for re-editing. THE drawback is that clips must be manually split into scenes, though.
I have always used this shortcut for fast iMovie v1-6 import with no ill effects:
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#quick_DVimport
I also use D8 tapes to store the edited footage, just in case some Deskstar decides to break (storing the same date on TWO Deskstars still seems like overkill)...

Similar Messages

  • Effort estimate (ABAP) during Unicode Conversion project

    Hi ,
    I am working on a CU&UC (Combined Upgrade and Unicode Conversion) project from 46C to ECC6.
    We are having 8 different codepages (MDMP SYSTEM) and around 10000 custom objects.
    Does anyone have any experince in doing such kind of project ? I am looking at the effort estimate on technical side (ABAP) and functional side.
    Any inputs of Technical effort in such a project with related number of codepages and custom objects will be useful (in man days & project duration).
    Thanks
    Dilip

    Hi Dilip,
    the main effort from ABAP side seems to be testing of the new system and creating the Unicode vocabulary. You need test teams and test plans for all locations and for the vocabulary you need people for all your languages. ABAP coding itself is probably not your biggest problem. You have to switch your system to unicode and then check all your sources. This could be done by a report or transaction (check the documentation regarding the Migration). From my point of view this is the main effort you'll have, testing and building the vocabulary. How big this effort is depends on your system. I think six month are a good time frame for the whole project (I assume you migrate a landscape of 3 systems). Because I'm working in the Basis administration I could not tell you the exact man days, but I would estimate up to two weeks for the vocabulary per language. You should have the numbers for the system tests from previous upgrades.
    The technical migration effort depends on your hardware and time requirements. If your system is big (TBytes) and your downtime is very limited it could be necessary to tune the migration by testing it several times. If your requirements are not that high, then a single test migration could be sufficient. I've done two bigger migrations with 2.5 and 3.5 TB in less than 24 hours but therefore you have to have fast hardware and you have to tune your process well. If you have a single huge table this could destroy all efforts reaching your time target, if for example the index build could not be done in less then your time target. If you have enough hardware resources and time to tune your migration you could reach almost any time (which makes sense - some hours).
    Best regards
    Ralph Ganszky

  • Uicode Conversion Project - Question on transaction UCCHECK

    Hello,
    We are about to start an Unicode conversion Project. We have SAP 4.7C & we are going to make it Unicode enabled. In order to plan the ABAP/4 resource requirements precisely, I ran transaction UCCHECK to get the list of the development objects with Unicode errors. I have an urgent question with the way the transaction is executed:
    When I run UCCHECK with selection screen option "Display lines that cannot be analyzed statically" , I get too many error & majority of them say that  "the system couldnu2019t perform the check on the current statement & it can only be carried out at runtime"  When I ran UCCHECK without option "Display lines that cannot be analyzed statically" , the total error count was way low u2026
    Can someone please explain me the correct way to use transaction UCCHECK?
    Thanks in avance,
    Umang

    Pl. see this help text. U can access the same from UCCHECK's selection screen.
    ABAP Unicode Scan Tool UCCHECK
    You can use transaction UCCHECK  to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
    Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
    Selection of Objects:
    The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
    PROG Report
    CLAS Class
    FUGR Function groups
    FUGX Function group (with customer include, customer area)
    FUGS Function group (with customer include, SAP area)
    LDBA Logical Database
    CNTX Context
    TYPE Type pool
    INTF Interface
    Only Examine Programs with Non-Activated Unicode Flag
    By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
    Only Objects with TADIR Entry
    By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
    Exclude Packages $*
    By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
    Also Display Modified SAP Objects
    By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
    Maximum Number of Programs:
    To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
    - Call transaction SAMT
    - Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
    For further information refer to documentation for transaction SAMT.
    Displaying Points that Cannot Be Analyzed Statically
    If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
    To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
    Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
    Applikation-Specific Checks
    These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
    View Maintenance
    Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
    UPLOAD/DOWNLOAD
    The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.

  • Unicode Conversion Project Template

    Hi,
    My company is planning for BI Unicode Conversion. We are also planning a upgrade from 4.7 to ECC 6.0 with unicode.
    I am required to create a project plan the BI unicode conversion project.Does anyone project Template for unicode conversion/upgrade project?
    Thanks
    Niveda

    Did u got plan ??

  • Analog to Digital conversion of hi8 tapes

    I have many hi8 video tapes that I have been trying to digitize so that I can import them into my imac. I have connected my analog hi8 camera to a Sony DSC-PC350 mini dv camcorder that has an analog to digital converter (pass through). In the VTR mode I can view my movies on the Sony camcorder. However, when I connect the Sony to the iMac with a firewire, I get a 'no tape' message on my iMovie screen. At the same time the video screen on the Sony camcorder goes blank. Can someone help me with this problem? Or is it possible that you cannot import a conversion on iMovie '09?

    Hi again ftts (having a little trouble pronouncing that)
    I went to the Sony web site and simply downloaded the operator's manual for that camcorder...
    http://esupport.sony.com/US/perl/model-documents.pl?mdl=DCRPC350
    I also compared it to the manual of my TVR-330 which is a Digital8 camcorder and does have the pass through functionality. I did that to find the wording they use when talking about pass through (Sony never calls it "pass through"). All indications of the manual for your camcorder indicate you can input an analog signal and record it to digital tape. But nothing indicates you can use the camcorder as an A2D pass through device like you can with my Digital8 model.
    So you will have to go through the two step process of first recording onto the MiniDV with tape. Then secondly importing it to the Mac. If you want to use that one.
    For the DCR-TRV22 ...
    http://esupport.sony.com/US/perl/model-documents.pl?mdl=DCRTRV22
    it looks like that one WILL do the pass through function (see page 173 of the manual). So if you want to skip the tape part then use the TRV22 camcorder instead.
    Cheers,
    Patrick

  • Converting Hi8 to digital

    I am in the process of archiving my old Hi8 analog tapes on my IMac 2.0. I am using a Sony Digital 8 camera , TRV 840 that I can use as a converter.
    2 Questions:
    1. What are the "easy setup" settings that I should use in Final Cut Express?
    2. When I tried to capture the material, video and audio were out of sync. Anything I can do about that?
    Thanks
    Stefan
    IMac 20 inch 2 GHz G5   Mac OS X (10.4.9)  

    "By the way, my camcorder gives me a 12 or 16 Bit option. Which one should I use in the future to record?"
    Always use 16 biit to work with a computer.
    "One more question: how do I set the Bitrate in Final Cut Express?"
    Use Easy Setup>DV-NTSC 48kHz-DV Converter if your are converting from an analogue source.
    Use Easy Setup>DV-NTSC 48kHz if you are capturing from a DV cameras tape shot with 16 bit.
    The settings mentioned are assuming you are using NTSC the standard for North America.
    I personally like to go from analogue to miniDV tape. You have a backup tape this way and all the benifits that Timecode has with FCE.
    The 32kHz Easy Setups match 12 bit audio.
    Al

  • How to fix sent text message resetting to beginning of conversation after 4.3 update?

    I recently went through the update to 4.3 on my Galaxy S3.  Unfortunately now when I send a text and then minimize the keyboard my phone brings me to the top of the conversation thread, meaning the first message in the thread, and not to the bottom where the newest message was sent.  Once someone responds it will bring it back to the most recent received message however I find this highly annoying that after I send a message I have to scroll all the way to the bottom of the thread to see it.  Also even when someone responds to my message and I open the thread it bounces to the beginning of the conversation before snapping down to the bottom and the most recent received message.  Before the update it would show the most recent message, sent or received, automatically.  Is there any way to fix this short of one of the resets, which I have doubts of working anyway? Thanks.

        Hi MRGrey,
    I understand wanting your text messages to be easily accessible and easy to reply to. Does this happen every time you exit out of the Messaging application and go back in? Are you using the text message application that came with the phone or a third party application? You may want to try going to a summary of all your text message threads, and then, jump back into the thread you want to see. Let us know if doing that gets you to the newest text message.
    ElizabethE_VZW
    Follow us on Twitter @VZWSupport

  • Conversion project

    We have decided to abandon an upgrade from 10.7SC to 11i in favor of a re-install of 11i. This is t allow the reconfiguration of certain modules in support of new requirements and adjustments being made in the business.
    We have identified 37 discrete conversion types in the following modules: Purchasing/Receiving, Quality, Projects, Order Entry, General Ledger, Accounts Payable, Accounts Receivable, Fixed Assets and Cash Management.
    How realistic is it to expect one devloper to accomplish this task in 3 months.
    Thanks
    Ayokunle Giwa

    Hi Jai,
    There is nothing like conversion from BPS to BPC. Both are different tools but used for the same functionality. You have to rebuild the whole configuration in BPC.
    Thanks
    Anjali

  • Changing project presets | Adobe Digital School Collection | Adobe TV

    Adobe Premiere Elements 11 is designed to make your life easier. In this lesson, you will learn the power of using presets so you don't need to specify certain settings. From NTSC to PAL, Premiere Elements 11 has it all covered for you.
    http://adobe.ly/Sg28NU

    You talk about having the project presets match your video..  But are they really supposed to be what you want the output to be?
    I am making a DVD of my kids to send to their grand parents.  My source isn't one camera.  Its a JVC camcorder and some videos from a Fujifilm digital camera.  They are both widescreen, but the camera is newer so its video is better quality (1080 instead of 720).  In addition, I want to interpose some stills from the camera into the movie as well.  And sometime in the next year I would like to actually be creating Blu-ray movies (I need to learn PE11 better and then get a Blu-ray burner).
    So should I choose a preset that matches what I want the video out to be or one that matches the camcorder as most video will be from that source?
    Thanks,
    David.

  • How to add a symbol to the beginning of a project?

    I have a pretty intricate Animate composition.  I want to add a simple Symbol/Animation at the beginning.  I've tried inserting time and it did nothing.  Basically, I just want to shift everything over a couple of frames.  I thought of turning the balance of the composition into a symbol, but a lot of the interactivity is based on Labels on the stage's main timeline, and it breaks when I try to convert to a symbol.  I'm not sure what I'm missing here?  Any help would be truly appreciated!
    Thanks!
    Jon

    Hiya Res,
    I will definitely give it another shot.  I tried that, but I think I might've given up too easily .  I'll let you know how it works out. 
    Thanks!

  • Help with binary conversion project

    hey my assignment was to make a program that would say the binary representation of an int. i got my program working and im pretty sure it works for all negatives and 0. my question is can you guys help me with a way to do the same steps with for( or while( ? it seems like i went the long way doing this project and even tho it works theres probably a much simpler way of going about it. theres no interface or anything we just change the value of N and recompile it and run from command prompt so far in our class. thanks for the help
    class binary {
    public static void main(String[]args){
         int N = -264;
         int M = N*-1;
         int A;
         int A1;
         int B;
         int B1;
         int C;
         int C1;
         int D;
         int D1;
         int E;
         int E1;
         int F;
         int F1;
         int G;
         int G1;
         int H;
         int H1;
         int I;
         int I1;
         if(N==0) {
              System.out.println("The Binary reresentation of "+N+" is = 0");
         if(N<0) {
              A=M/2;
              A1=M%2;
              B = A/2;
              B1 = A%2;
              C = B/2;
              C1 = B%2;
              D = C/2;
              D1 = C%2;
              E = D/2;
              E1 = D%2;
              F = E/2;
              F1 = E%2;
              G = F/2;
              G1 = F%2;
              H = G/2;
              H1 = G%2;
              I = H/2;
              I1 = H%2;
         else {
              A= N/2;
              A1 = N%2;
              B = A/2;
              B1 = A%2;
              C = B/2;
              C1 = B%2;
              D = C/2;
              D1 = C%2;
              E = D/2;
              E1 = D%2;
              F = E/2;
              F1 = E%2;
              G = F/2;
              G1 = F%2;
              H = G/2;
              H1 = G%2;
              I = H/2;
              I1 = H%2;
         if(A1==1 && N<0){
         B1=B1-1;
         C1=C1-1;
         D1=D1-1;
         E1=E1-1;
         F1=F1-1;
         G1=G1-1;
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==1 && N<0){
         C1=C1-1;
         D1=D1-1;
         E1=E1-1;
         F1=F1-1;
         G1=G1-1;
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==0 && C1==1 && N<0){
         D1=D1-1;
         E1=E1-1;
         F1=F1-1;
         G1=G1-1;
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==0 && C1==0 && D1==1 && N<0){
         E1=E1-1;
         F1=F1-1;
         G1=G1-1;
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==0 && C1==0 && D1==0 && E1==1 && N<0){
         F1=F1-1;
         G1=G1-1;
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==0 && C1==0 && D1==0 && E1==0 && F1==1 && N<0){
         G1=G1-1;
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==0 && C1==0 && D1==0 && E1==0 && F1==0 && G1==1 && N<0){
         H1=H1-1;
         I1=I1-1;
         if(A1==0 && B1==0 && C1==0 && D1==0 && E1==0 && F1==0 && G1==0 && H1==1 && N<0){
         I1=I1-1;
         if(A1==-1){
         A1=A1*-1;
         if(B1==-1){
         B1=B1*-1;
         if(C1==-1){
         C1=C1*-1;
         if(D1==-1){
         D1=D1*-1;
         if(E1==-1){
         E1=E1*-1;
         if(F1==-1){
         F1=F1*-1;
         if(G1==-1){
         G1=G1*-1;
         if(H1==-1){
         H1=H1*-1;
         if(I1==-1){
         I1=I1*-1;
         if(A==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+A1);
         else if(B==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+B1+A1);
         else if(C==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+C1+B1+A1);
         else if(D==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+D1+C1+B1+A1);
         else if(E==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+E1+D1+C1+B1+A1);
         else if(F==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+F1+E1+D1+C1+B1+A1);
         else if(G==0 && N<0){
              System.out.println("The Binary reresentation of "+N+" is = 1"+G1+F1+E1+D1+C1+B1+A1);
         else if(H==0 && N<0){     
              System.out.println("The Binary reresentation of "+N+" is = 1"+H1+G1+F1+E1+D1+C1+B1+A1);
         else if(I==0 && N<0){     
              System.out.println("The Binary reresentation of "+N+" is = 1"+I1+H1+G1+F1+E1+D1+C1+B1+A1);
         if(A==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+A1);
         else if(B==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+B1+A1);
         else if(C==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+C1+B1+A1);
         else if(D==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+D1+C1+B1+A1);
         else if(E==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+E1+D1+C1+B1+A1);
         else if(F==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+F1+E1+D1+C1+B1+A1);
         else if(G==0 && N>0){
              System.out.println("The Binary reresentation of "+N+" is = 0"+G1+F1+E1+D1+C1+B1+A1);
         else if(H==0 && N>0){     
              System.out.println("The Binary reresentation of "+N+" is = 0"+H1+G1+F1+E1+D1+C1+B1+A1);
         else if(I==0 && N>0){     
              System.out.println("The Binary reresentation of "+N+" is = 0"+I1+H1+G1+F1+E1+D1+C1+B1+A1);
    }

    String intAsBinaryString(int n){
      String res = "";
      for(int i = 1; i!=0; i *=2){
        res = ((n & i != 0)?"1":"0") + res;
      return res;
    }Pete is right, in order to understand this you need to know how integers are stored.

  • Beginning College Java Project. Help Me Please !!!

    The following is code that im writing for a program that will play a game between the user and the computer. I am getting an error message saying "CLASS EXPECTED".
    The error is pointing me to the playerChoose Method where the variable pcchoice is trying to accept the value inputted by the user.
    I am a beinner to the Java Language and am having difficulty understanding what the problem is or what the error means.
    Can someone please help me!!!
    import java.io.*;
    import java.util.Random;
    class NIM
    public static void main (String [] args) throws IOException
         int game = 21; //Keeps Track of sticks remaining.
         Random random = new Random();
         PrintInstructions ();
         playerChoose();
         game = game - pchoice;
         computerChoose();
         game = game - cchoice;
    //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    static void PrintInstructions ()
         System.out.println ("You are going to play the game NIM.\n");
         System.out.println ("In this version of NIM, there are 21 sticks on the table.");
         System.out.println ("On each move, the user and the computer take turns picking");
         System.out.println ("up 1,2 or 3 sticks until there are no more sticks left.");
         System.out.println ("The one who picks up the last stick loses.\n");
    //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    static int playerChoose()
         pchoice = 0;
         BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
         System.out.println ("Choose your sticks. Enter 1-2 or 3.");
         pchoice = int.ParseInt(in.readline);
         while pchoice = 1
         return(pchoice);
    //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    static int computerChoose()
         int cchoice = 0;
         for (i= 1; i<=50; i++)
         cchoice = random.nextInt(3)+1;
         return(cchoice);
    }

    In this line
    pchoice = int.ParseInt(in.readline);you are wanting to parse the String entered from the keyboard as an int.
    One way to do that is to use the parseInt method from the Integer class.
    To use a static method from a class you start with the name of the class, followed by the name of the method (with the correct capitalization!), like this:
    pchoice = Integer.parseInt(in.readline);The following line is missing parentheses; add them as below:
    while (pchoice = 1)These corrections will expose more errors that can then be fixed.

  • Unicode conversion Project

    Hi,
    Any one tell me  how to do the Unicode in ABAP ecc5.and explain how to use UCCHECK Tcode.

    Did u got plan ??

  • Beginning the Puzzle Project | Touch Events in Flash Professional | Adobe TV

    In this video we take a look at how you can break apart an image into several sections for the puzzle sample.
    http://adobe.ly/XoEsiE

    It doesn't appear to exist on Adobe TV. If you go to the TrainSimple website there are a couple of free videos that cover certificates.
    iOS certificates: http://www.trainsimple.com/ViewVideo.aspx?ivid=238&token=MjQvMDMvMjAxMyAwNzowOToyNw==
    iOS provisioning profile: http://www.trainsimple.com/ViewVideo.aspx?ivid=239&token=MjQvMDMvMjAxMyAwNzoxNzoyMA==

  • How to add a blank (black screen) to beginning of project?

    I want to add a black screen to the beginning of a project ... so that when I hit play button, a few seconds elapse before the first clip appears. I tried adding time to the transition before my first clip and making it 5 or more seconds, but the program reverts back to the default 2sec.

    Alternatively, I just add a title to the beginning but have no text in it. You can adjust the length as long as you want and add a transition into your film.

Maybe you are looking for

  • Payroll Issue

    Dear Gurus, Please provide me with your knowledgeable input.... 1st/ My question here is what is the significance & importance of Allowance Grouping in  payroll-India scenario.....i have gone through the other posts but could get a clear understandin

  • Bean not found in WU_TEST_106.fmb

    Hi, I'm using Developer Suite 10g and WebUtil 10.1.2.0. When I load the testform WU_TEST_106.fmb in Form Builder 10.1.2.0.2 there is no problem (WEBUTIL_CANVAS shows without errors), so I think that my installation is correct. At runtime, however, I

  • Mail not recognizing digital certificate

    Hi all, I had a digital certificate generated by .Mac which worked fine in mail. Today I noticed that mail stopped giving me the option to digitally singed my mails. Did someone notice this behavior? Is there a fix? Thanks, Ziv

  • Error:Required product not found

    Hi, When i click the edit in the interactive form component i encounter a message like "Required Product not installed.Install SAP interactive form-livecycle designer to edit the forms." <b>How can i rectify this error? i have installed adode livecyc

  • Mirroring on a macbook air

    Alrighty I have a macbook air bought in January. have mac os lion 10.8 i have a apple TV black i cant get the mirroring to happen? any suggestions? Peace