Beginning Welcome Screen

Hello,
have a simple question on the WELCOME SCREEN.
This is the screen when you push the top button on the phone and all you see is the time, date, if you have any notifications...and 1 calendar event..."Next Event"...my question is is there anyway to have MORE than 1 event listed on that page. This instead of going into the calendar specific section.
I have looked at all the settings and have found nothing to "customize" this welcome screen.
Hope I have explained this properly...any help would be great!
Thanks
TW

The screen you are reffering to is the locked screen. At this point, I didn't find any options to add additional notifications. But you can add two line custom messages. It is possible that 3rd party apps that change the theme of the z10 can utilize the features you are looking for. It would be a nice option to have, and I can see the benefits. Maybe future OS upgrade can give you that option.
To add a custome lines. On the home screen, swipe from top down, settings, display, and fillout Message dsplayed on locked screen.

Similar Messages

Does anyone know what to do if the Ellipsis 7 is stuck on a welcome screen?

My Eliipsis 7 is stuck on a welcome screen (not the Verizon Wireless Welcome Screen) and will not start or shut down. I tried resetting by using a paperclip, but nothing happens. I also can't figure out how to open the thing up to remove the battery. What can I do?

Hi orphanelec!
Let's see what's causing the problem! When did the issue begin? Any physical or water damage? Try this:http://vz.to/1z9nama .
Thanks,
AyaniB_VZW
Follow us on Twitter @VZWSupport

Slow to wake up; "Welcome" screen after archive & install

Thanks for the ongoing help. This board has been a lifesaver many times.
I've had numerous problems with my Rev. B iMac that usually require DiskWarrior to fix. It gets worse every time.
Anytime it shuts down unexpectedly, either because of a power outage or force shutdown, the files are so scrambled that it never gets past the gray screen without the fans running and then shutting down. I have to boot up in target disk mode and fix it with DW from my G3 iMac.
The problems start when I try to open a file or program immediately (less than five minutes) after it wakes up; I get the spinning beach ball for at least ten minutes, and then the computer seems to catch up.
This latest time, though, the files were so screwed that it gave me the "Welcome" screen and wants me to set the computer up from the beginning. I can tell that my files are still there when I boot up in target disk mode, but if I go through with the setup, will they be erased, and what's causing all these problems to begin with? The hardware test didn't show any problems, and both my RAM sticks appear to be OK.
Thanks again for any help.
G5 iMac 2.0 G Mac OS X (10.4.6) 1 G additional RAM

Power outages can cause disk corruption just like a forced shutdown. With a UPS, you can eliminate the frustrations associated with a power loss. Get one.
Even though it passed the hardware test, I would still say that it sounds like a hard drive problem. Take the time to run the extended test and see what it finds.
If it still finds nothing, then I would try creating a new user account. There is no reason that starting up from sleep should give you any problems at all, but by creating a new user account, you can eliminate some possibilities like corrupted plist files and such.
Take a look at Dr. Smoke's <a href"http://www.thexlab.com/faqs/faqs.html"A>FAQs and see if you can find anything that works there.
If you create that new account and there are no further problems, I would either keep using that or do an archive and install of the OS.

How to avoid maximal expand of screen size for welcome screen? VmWare prob?

I run Suns Solaris Express Edition for VmWare under WinXP.
When I start Solaris VM everything is fine except the fact that the welcome screen at boot up (= the screen where the user has to enter his login and password) is expanded to approx 2400 x1600 pixel).
I have to use the horizontal scrollbar to get the entry fields for login and password.
After I entered correctly login and password Solaris retrieves the internal correct display size
of 1280 x 960 and shrinks the screen size accordingly.
So again everything is fine from this time except the screen size at the beginning.
Is this an error of VmWare or of Solaris?

I agree that iMovie's still image quality is embarassingly bad and has many bugs.
Even with no Ken Burns, the sharp images tend to flicker on a TV because iMovie doesn't blur them properly.
And as you very well described, iMovie's Ken Burns produces uneasy zooms/pans because the subpixel rendering is, uh, suboptimal.
iMovie's immortal rendering bug when exporting non-Ken Burns'ed images to iDVD/tape doesn't make things any better.
Yes, bicubically downsampling the input images to 640x480 or adding gaussian blur to the megapixel input images takes care of the flicker and uneasy zooms/pans, but as a side-effect the maximal zoom-ins are then TOO blurry.
The best workaround is to use Photo To Movie's higher quality export setting. It has the best quality rendering engine (I recently compared it to Still Life and FotoMagico). Disclaimer: I'm just a satisfied customer of Photo To Movie.
See also:
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow

Just reset tiger but can't get past the first welcome screen

I'm loading up my MacBook Pro after resetting it to factory settings without a disk. It loads up to a welcome screen after a little animation of languages and it says 'to begin select the country or region you're in, then click continue'
But there are no languages to select. The box is empty and obviously I can't continue until I click on something.
Anyone had this issue or is it just me?

Possibly, make sure it's the Retail version though.
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Would be cheaper to get a 10.6 Install Disc...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

MBP Stuck at Welcome Screen after hard reboot.

Hi All,
I was trying to restart my 2.16ghz MBP last night, and it froze, so I did a hard restart. When I booted it again, it came to the welcome screen. If I go through the welcome screen wizard, it hesitates for a moment, and goes right back to the beginning of the welcome screen.
I'm unable to boot from the optical drive, nor will it detect my Time Machine drive.
Any thoughts?

Can you insert the OSX install CD (#1) that came with the computer? If so, then restart, hold down "c" as soon as it chimes, and then once booted go to disk utility and use it to repair your internal hard disk. Maybe this works for your problem.

Get stuck at the welcome screen

I just installed Photoshop Elements 10 and Photoshop Premiere Elements 10 on my Windows 7 professional 64-bit computer. I installed from disks ("Adobe Elements Combi X NL 64, so 64 bits in Dutch).
Installation does not give any errors - the installation logs end with "Exit Code: 0 - No error."
Both Premiere and Photoshop have the same problem: the intitial Welcome screen comes up. But if I click one of the options (Like "edit" or "Organize"). nothing much seems to happen: the icon in front of the "button" changes into a moving icon for some 10 seconds, then the original icon is back and the program doesn't start.
Also in the taskmanager I don't see any changes (no new processes being started; the processes "Photoshop Elements 10.0.exe *32" and "Adobe Premiere Elements 10.exe" are running). What can be the problem?
I had installed CS5.5 in Dutch on my computer. After installing Elements I removed this software, but that did not give a better result.
Any suggestions?
Peter

I deleted all the files, that is I deleted all the content of the C:\Users\peter\AppData\Roaming\Adobe\Elements Organizer\10.0\Organizer folder. This was not the solution.
But it's closer to the problem now. When I try to start the Organizer, the log file is created. And appatanly Organizer detects the desktop resolution to be 640x480 - while the setting in Windows is 1280x1024!
Apparantly the Editor (and Premiere Elements 10.0) detect the screen resolution correctly.
The conent of the logfile is:
0 Elements Organizer 10.0.0.0 Log (5) started 2012-09-05 22:59:59.805
10 (+   0) Windows OS Version as reported by Qt: 0x90
11 (+   1) Desktop Resolution: 640 x 480 Depth: 32
12 (+   1) Begin AMT Library calls
179 (+ 167) End AMT Library calls
221 (+ 42) problem opening C:\Users\peter\AppData\Roaming\Adobe\Elements Organizer\10.0\Organizer\status.dat for reading, maintaining default values
246 (+ 25) Primary Font: Myriad Web Pro
246 (+   0) Bezig met laden van bitmaps...

I've an iPone4GS. I downloaded the latest upgrage onto it. IT HAS STUCKED ON THE WELCOME SCREEN. IT ASKS MY password belongs to My Apple ID

Hi,
I would very much appreciate some practical advice. I've an iPhone 4S for about 2 years now., I did the software upgrade as usual. Now after I downloaded the latest (8.0.2 I assume) onto my phone it stacked on the welcome screen. It lets me enter the password belongs to my Apple ID THEN IT TAKES ME BACK TO THE VERY BEGINNING TO THE WELCOME SCREEN. This is all what I can do on my phone. It's a nightmare. Please help. Thank you.

Did you try to remove it from the "Find my iPhone" list, so that the Activation lock is turned off and you can set it up again?
iCloud: Remove your device from Find My iPhone

Photoshop/Premiere Elements 10 installed but won't run past Welcome screen

I bought and downloaded Photoshop Elements 10 and Premiere Elements 10 for Windows 7 - 64 bit on Dec.31/11. There were no error messages in the download, although the Akamai downloader screen didn't seem to show 100% before proceeding to the next step. Everything appeared to install correctly (it's a long process!).
At first, clicking on the desktop icons or the Start Menu list would bring up the Welcome splash screen, where the broad options (Organize, Edit, New Project) were shown. However, clicking on these options had no effect at all. Eventually even the Welcome screen wouldn't appear. I checked the Windows task manager and no applications were running.
I checked the shortcut properties and noticed that there was a separate executable in the target directory (eg. existing link was to "Adobe Premiere Elements 10.exe", but there was also a file called "Adobe Premiere Elements.exe"), which did run...however, I couldn't launch the Organizer from that program, and the "Home" link to the Welcome screen didn't function either.
With thousands of these programs being downloaded, I'm surprised that this serious glitch hasn't surfaced before. Any ideas?
Thanks!

There are three different programs -- Photoshop Elements (PSE) which is for editing bitmaps, Premiere Elements which is for video editing, and the PSE Organizer which is for cataloging your media.
I don't like the sound of that Akamai downloader not registering 100%.
Uninstall all the Adobe products, reboot, and download the installation package again. Check the Properties on that downloaded file and "Unblock" it if Windows has flagged it as "possibley harmful and coming from another computer" before starting the installation.
Ken

Itunes 11 welcome screen every time I open the program.

Yeah,
itunes 11 opens to welcome screen every time I open the programme.
OS Win8
very annoying
help?

This is what worked for me!!!!!
Close iTunes.
With Windows Explorer go to View in the top menu and allow Hidden Files.
Navigate to:
C:\Users\[which ever user is you]\Appdata\Local\Apple Computer\iTunes
Delete all files in this directory.
Start iTunes and see the Welcome Screen for hopefully the last time!
I am not an expert. This was a stab in the dark based on the Mac ByHosts solution and it just happened to work for me. Give it a try and let me know if it works.
Good Luck!

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

How to delete file from DW welcome screen

Don't know much about CS3, but learning. Erased some files,
started over again, but noticed the name of the file/site is still
showing on the "welcome" screen when I open CS3. Can't find a way
to delete it. Any suggestions?
Thanks

i think you might just have to wait until you've
opened/created enough
files to move the old ones down and off the list.
or you could just click the "don't show again" box on the
Welcome
screen. it's not really necessary, because you can find all
of those
options in the menu at the top as well. that welcome screen
may seem
handy now, but you'll probably get sick of it eventually. i
know i did!
MrStuart01 wrote:
> Don't know much about CS3, but learning. Erased some
files, started over again,
> but noticed the name of the file/site is still showing
on the "welcome" screen
> when I open CS3. Can't find a way to delete it. Any
suggestions?
> Thanks
>
>

Can't open web pdf document: Adobe Reader 10 stops at welcome screen

I installed Adobe Reader X.
Now, when I open a pdf file from the web, the browser (either Google Chrome, Opera or Firefox) downloads the file and opens Adobe X.
Funny, I thought. Up to this date (using Adobe 9) the browser opened the file into a browser window, using the plugin.
Of course, I went into Reader Edit/Preferences/Internet and checked the "Display PDF in browser" to no avail: instead of opening the pdf inside the browser, the browser launches the Reader X program.
However, after downloading the pdf and opening Reader X, you find a nice gorram welcome screen.
As there is no way to close that screen (you have to choose one of the documents opened in the past or pick a document from the disk), Adobe Reader will not open the file I just picked in the browser. It just sits there waiting for me to pick one of the options of this welcoming screen.
Of course, the page with the files I'm trying to download uses an script or something similar to load them, so I cannot right click on any of the files to download them to a folder and then open them using Reader's "Open file" option.
The file I'm trying to open is this one: http://www.docs.sony.com/release/DCRTRV19.pdf
The page where the file resides is this one: http://esupport.sony.com/US/p/model-home.pl?mdl=DCRTRV19&template_id=1&region_id=1&tab=man uals#/manualsTab
So, how in heaven do I open this file from my browser? (as I said, Opera, Chrome and Firefox all display the same behaviour. I haven't tried IE and I refuse to do it).
To be sincere, in Firefox the file opened once. I read the first pages and then I made the mistake of indicating to the browser that it should use the Adobe X to open pdf files. (Firefox "offered" that option out of its "own free will").
Now I have the same problem in Firefox: I see a nice blue bar that indicates the percentage of the file downloaded and, when it reaches 100%, Adobe opens and "freezes" the browser, because Reader sits there at the welcome screen and the browser is waiting for the file to open.
Of course, the help for plug ins at Firefox and Opera (I haven't checked Chrome) says simply: download Adobe Reader and that's it.
I frankly hate this behaviour: up to this date Reader has been the source of simplicity, the example of a software that does only what it was made to do, sitting quietly in my PC, churning pdf files without the slightest complain, a veritable jewel among poorly designed software.
As this unclosable welcome screen seems to me a blatant attempt by Adobe to undercut the many web sites that offer to translate PDFs to Word documents, my only thoughts are: thanks, people at Adobe! You have managed to break the unbreakable.
Can anyone help me? This day has been a nice one up to this moment...

Please let me know the following details:
1. The exact version of Adobe Reader on your system. You can get the same by clicking on Help > About Adobe Reader or getting the same information from the Add/Remove Programs section in the Conrol Panel. If its not the latest version of Reader i.e. 11.0.03, please download the same from: http://get.adobe.com/reader and see if it solves the issue.
2. Does the issue also happen if you just launch the Reader application alone without launching any PDF.
3. Are you using any 3rd party plugin for Adobe Reader. If so, please remove the same and see if it solves your problem.
In case you arent sure regarding the same, please follow the below steps and see if it helps:
     a. Navigate to the Reader installation folder. Usually its C:\Program Files\Adobe\Reader 11.0
     b. Ensure that Adobe Reader is not running and delete the entire "Reader" folder
     c. Initiate a Repair transaction for Adobe Reader from the Control Panel > Add/Remove Programs
4. Try temporarily disabling the Anitivirus software, and see if it solves your issue.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

File Not Found Error in Welcome Screen

Help please!
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

Beginning Welcome Screen

Similar Messages

Maybe you are looking for