Behavior of a Non "TB Last" member underneath a TB Last Parent

Can some one explain values for months : Jan , Feb and Mar ,Quarters: Qtr1 get affected with a Non-TB last member rolling up toits TB last Parent? There are 2 Non TB Last Members with + cosolidation operatorrolling upto their parent TB Last.What would be the value of QTR1 Member for the TB LastMember? Will that be equivalent to sum of March Months of non TB Lastmembers? Explain further!!

The behavior is exactly what you would expect. In the below Example, Sales and COGS are Non-TB members and Margin is TB Last. ------------Jan-------Feb-------Mar-------Qtr1 Sales----100.00--100.00--100.00--300.00 COGS-----50.00---50.00---50.00--150.00 Margin----50.00---50.00---50.00---50.00

Similar Messages

In an Analyzer report how can I filter based on the last member of a dimension?

Using Analyzer 6.2.1What I'm trying to do is to create a report that shows always the last month available on the cube.I'd rather like to avoid having to add UDA or Alias or whatever in my outline.Is there a way to retrieve the last member of a dimension directly in Analyzer?

"Substitution Variables" can do what you are asking for.

I am running OS X version 10.7.5 on a Macbook Air. I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

I am running OS X version 10.7.5 on a Macbook Air. I read in one thread where someone had an update that was higher than 10.7.5 but when I ask for updates, none are available. Is this the last update for OS X?

Niel, thanks for your response. I have been very wary of downloading Mavericks on this machine. I don't feel it has the power to run it and I'm afraid it was slow it down terribly. It was bought in late 2008. It's fine for my purposes at this time…just holding on until I buy a new one. I have the same problem others have with autofill not working, so I was trying to see if an update would help that situation. Grace

MDX: Selecting specific dimension member and its descendants from parent child dimension where dimension member names can be same in dimension hierarchy

I'm creating a SSRS report using SSAS cube as a source.
When creating a dataset for the report, I'm having trouble with MDX to select a specific dimension member and its descendants from parent child dimension where dimension member names can be same in dimension hierarchy.
Lets say for example that I have an account dimension where,
In level 02 I have company ID:s 101, 102, 103 and so on...
In level 03 I have Balance sheet
In level 04 I have some account groups, Assets, Liabilities and so on... and In level 05 I have individual accounts
How can I select for example company 102:s Assets from level 04 and its descendants?
Normally in adventure works I would do this if I've wanted Current Assets and its descendants:
SELECT NON EMPTY { [Measures].[Amount] } ON COLUMNS, NON EMPTY
{ (DESCENDANTS([Account].[Accounts].[Account Level 03].[Current Assets]) ) } ON ROWS
FROM [Adventure Works]
But in my Account dimension at level 04 I have Assets member as many times as I have companies in level 02.
Tuomo

Hi Tuomo Helminen,
To this requirement of yours, I would recommend you use Cascading Parameters in Reporting services, you can refer to this FAQ How do I create cascading parameters when using cube database in Reporting Services at this link
http://blogs.msdn.com/b/sqlforum/archive/2011/04/11/forum-faq-how-do-i-create-cascading-parameters-when-using-cube-database-in-reporting-services.aspx
Thanks,
Challen Fu
TechNet
Subscriber Supportinforum
If you have any feedback on our support, please [email protected]
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I bought my iPhone 5 almost an year ago and since the last 2 weeks my battery lasts about 2 hours or less, while before it lastre a whole day. Can anybody tell me why is this happening or how can i solve my problem, please? Thank you.

I bought my iPhone 5 almost an year ago and since the last 2 weeks my battery lasts about 2 hours or less, while before it lastre a whole day. Can anybody tell me why is this happening or how can i solve my problem, please? Thank you.

You can follow these steps to save battery.
1. Turn on Auto-Brightness - The iPhone has an ambient light sensor that adjusts the brightness of the screen based on the light around it (darker in dark places, brighter when there's more ambient light) to both save battery and make it easier to see. Turn Auto-Brightness on and you’ll save battery because your screen will need to use less power in dark places.
Find it in the Settings app -> Brightness & Wallpaper -> Auto-Brightness On
2. Reduce Screen Brightness -the brighter the default setting for the screen, the more battery it requires. Keep the screen dimmer to conserve more of your battery.
Find it in Settings -> Brightness & Wallpaper
3. Stop Motion (iOS 7) -It's really cool, but it also drains battery. You may want to leave it on to enjoy the effect, but if not, turn it off this way:
Settings -> General -> Accessibility -> Reduce Motion -> move slider to green/on
4. Turn Bluetooth Off- Turn off Bluetooth except when you’re using it to squeeze more juice from your battery.
Find it in Settings -> Bluetooth -> Move Slider to Off
5. Turn Off Location Services -
This allows your phone to know where you are and give you exact driving directions, give that information to apps that help you find restaurants, and more. But, like any service that sends data over a network, it needs battery power to work. If you’re not using Location Services, and don’t plan to right away, turn them off and save some power.
Find it in Settings -> Privacy -> Location Services -> Slide to Off
6. Don't Automatically Update Apps (iOS 7)-
If you've got iOS 7, you can forget needing to update your apps by hand. There's now a feature that automatically updates them for you when new versions are released. Convenient, but also a drain on your battery. To only update apps when you want to, and thus manage your battery better:
Settings -> iTunes & App Store -> Updates -> move slider to off/white
7. Auto-Lock Sooner -
You can set your iPhone to automatically go to sleep – a feature known as Auto-Lock - after a certain amount of time. The sooner it sleeps, the less power is used to run the screen or other services. Try setting Auto-Lock to 1 or 2 minutes.
Find it in Settings -> General -> Auto-Lock -> Tap your Preference
Few more things that would consume battery even when not is use are the applications that run in background.
Follow the below steps to quit all running applications.
1) Double tap on the home button on the iPhone ( this will display all apps that are running in the back ground).
2) Just click on the tiny red X to quit application ( if iPhone is running on iOS 6 and below) else just swipe yhour finger over the running app upwards to quit ( if running on iOS7).

HT1414 My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(&don't have recovery disc). What do I do now?

My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(& I don't have recovery disc available). What do I do now?

Try using another computer. I had the same problem, repeated the given solution many times and each time it failed. Then I connected ipad to another computer and it worked immediately. Then I used the first computer to restore a backup.

Base member "ABC" cannot be the parent of "XYZ" in PARENTH1

Hello,
I am looking to obtain help/direction with a hierarchy issue. I am trying to process a Entity dimension and I am getting the error message:
Base member "ABC" cannot be the parent of "XYZ" in PARENTH1
Here is some information regarding the situation:
The "base member" the error points to, is not actually a base member.
There are two hiearchies for this dimension.ABC is not stated in that second hierarchy.
No data has been loaded to any model involving this dimension.
Control and Bypass are left empty.
Currency is set to CAD for each record.
ABC in PARENTH1 points up to another level (not at the top of the hierarchy).
I am also having this problem with two other entity dimensions and a user defined one.
Anyone have any thoughts on this?
BPC 10.0 for Netweaver SP 12.
Thanks,
Ryan Lambert

Hi Fernando,
For sure the member can't be a base member of one hierarchy and parent in another - nonsense!
But the member can easily be a parent member in one hierarchy and not described at all in another hierarchy as I explained in my previous post.
       PARENTH1 PARENTH2
B1     1P1               2P1
B2     1P1               2P1
B3     1P1               2P1
B4     1P1               2P3
1P1   1P2               Empty
1P2    Empty          Empty
2P1    Empty          2P2
2P2    Empty          Empty
Vadim

I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last. What h

I changed my server at the end of May & all worked well until the past week end since when I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last despite having had several emails since Friday. What has happened & can I get email back to normal?

Hello Stern snapper
If you are having issues with receiving email on your iPad, then check out the article below to troubleshoot the issue. You may just need to remove the email account and add it back in.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
-Norm G.

Material wise Last Receipt Date v/s Last Issue Date report

Dear Sir,
We are in a need of a report which can provide us Material code wise the last material recipt date and last issuance date .
Kindly guide us if there is any standard report available in SAP . Incase we need to go for a z report then which tables should be referred to get the desired information .
Regards
Sania agarwal

Dear Sonia,
Execute the reports,MC.1,MC.A,MC.9,after executing these reports,click on choose key figures (F6) and select the options for
Last consumption
Last goods issue
Last goods movement
Last Receipt
and check the same.
Regards
S Mangalraj

Photos are appearing in Last Import but not in Last 12 months

When I import photos from my camera into iPhoto they appear under "Events" and "Last Import" but no under Last 12 months. Is there a way to correct this?
David

What are the dates of the photos? Last "n" months is a list of photos taken in the last "n" months irrespective of when they were mported. Typically your question is due to incorrect camera dates
There was another similar report recently
LN

Video set to stop on last frame appears lighter than last frame

I've got a video set to "stop on the last frame" using the technique described here:
http://digitalpublishing.tumblr.com/post/6141054971/how-to-make-a-video-stop-at-the-last-f rame-here
Works great. But whenever I do this, there is a slight darkening when the multi-state object appears at the end. To create the image for the multi-state objects, I opened the video in Photoshop, grabbed the last frame, and saved it as a JPEG.
Anyone have any ideas? I've tried saving the end image as a PNG, lots of other workarounds, but the problem persists. I've noticed this in other publications I've downloaded also, so I think the problem is widespread.

great to see this trick evolve in a first-frame-lasf-frame-method, wich I
thought about,too lately.
Will post an update in my article next time ii get the chance.
—Johannes
(mobil gesendet)
Am 27.09.2011 15:33 schrieb "KeithGilbert" <[email protected]>:
KeithGilbert http://forums.adobe.com/people/KeithGilbert created the
discussion
"Re: Video set to stop on last frame appears lighter than last frame"
To view the discussion, visit:
http://forums.adobe.com/message/3940255#3940255

Ipad 2 gone completely dead...not responding to reboot or charging..last check with service station last week said battery was in good shape, needed software update...how to go about it...please help

Ipad 2 gone completely dead...not responding to reboot or charging..last check with service station last week said battery was in good shape, needed software update...how to go about it...please help

By reboot do you mean pressing and holding both the sleep and home buttons for about 10 to 15 seconds (after which the Apple logo should appear) ?
If you can't get the iPad to switch on then you won't be able to update its iOS version

[SOLVED] ((none)) login/tty and no keyboard after last upgrade?

Hi,
I dual boot and it's been a while since I last upgraded. I booted into Arch, updated everything, and used the system for a few days before rebooting (perhaps a bad call). I just rebooted today and my login prompt is like this:
((none)) tty1
(none) login:
But my keyboard does nothing. No alt+f* to get to a different terminal, no nothing. I have to hard kill the machine. I've tried twice but would prefer not to do that more than I have to. The second time, fsck didn't work so I booted into the Arch install disk and ran it manually. I tried to chroot into my Arch install and re-run pacman -Syu but got transient server failures. Not sure what all needs to be in place to try and do that, though.
Has anyone encountered anything like this before? I get the same behavior with arch and arch fallback. I boot to login prompt, not directly to X so it's not anything to do with that, at least not that I would figure.
So far, the only thing I've been able to find is from 2007 (LINK) but it seemed related to X. I'm going to check rc.conf next time I boot up but wanted to see if there's any other suggestions from someone more experience before I boot up again and potentially have to hard kill.
Thanks for any thoughts/suggestions.
Last edited by jwhendy (2010-10-26 02:53:26)

@Knute: indeed.
Somewhat embarrassingly, I just found out about manually maintaining *.pacnew files today when researching an unrelated issue. It made me wonder if that was my problem. Perhaps something is goofed in /etc which would explain a ton.
I'm in OS X right now but will reboot shortly and try to fix this issue.
The keyboard issue is troubling as well, though. Some have reported no logins, but often it's a PAM or login manager issue trying to go into X directly. I'm doing no such thing and literally can't get *anything* to work on my keyboard. That makes me wonder...
If I were to boot into the Arch CD and try to run pacman manually... what do I have to do other than
# mount /dev/sda3 /mnt
# chroot /mnt
I tried that yesterday but failed. I'm wondering if I have to mount some other items for that to work. /proc?

Non standard Year member in Planning Years dimension

We have a non standard (to Planning) member of the Years dimension called 'No Year'. In order to add it initially, I had to go to the back end of Planning (HSP_OBJECT and HSP_UNIQUE_NAMES tables) and modify the members there. This was in version 9. The order of the Years members was then FY95 through FY14, then came No Year, then FY15. This worked for our start and end years within Planning, as our start year was FY09 and our end year was No Year, which allowed us to Plan through FY14 and also entered non-year specific data to No Year on forms. It also allowed us to omit 'No Year' from our scripts using a range of years FY09:FY14 (using substitution variables). Now that the year has rolled over (and, incidentally, we've upgraded to version 11), and our Planning years are FY10 through FY15, I would like to move No Year to be after FY15. However, I don't seem to be able to do that by updating the underlying tables above. I make the changes to the two tables, but it is not reflected in Planning (they display in the same order), and if I try to edit either of the two members in Planning (No Year or FY15), it gives me an error saying the member already exists. Does anyone know how I can accomplish moving the No Year member? I need to do it not only this year, but to have a process my client can follow each year, moving that member in the outline to be directly after the last Planning year.
Thanks,
Sabrina

If you want to go about hacking the tables and changing the order of 'No Year'.
If you run the following SQL against your planning application
select * from hsp_object where object_type = 38
You will see the position column and will have values like 1000000 = First place, 1000010 = Second Place and so on.
To alter the position then you need to note down the position value of 'No Year' and 'FY15'
update hsp_object set position = '1000070'
where object_type = 38 and object_name='No Year'
update hsp_object set position = '1000080'
where object_type = 38 and object_name='FY14'
Restart planning. Now this is all done at your own risk and when you app goes boom don't blame me :)
If 'No Year' was added in the correct way when you add year's it should always stay as the last position.
Planning assigns object ids between set ranges, normal year values (FY..) are 50002 onwards
No Year is out of that range e.g 50412
When No Year is added correctly then planning will add a new to the normal range of values for year (last year value + 1) and then alters the position order
Cheers
John
http://john-goodwin.blogspot.com/

Interactive PDF convert behavior invert to none

I have an 60 page interactive pdf that I made. I accidentally put a nav bar throughout which has the button behavior set to "invert". I need to change them to "none". Is there a quick way to do that? Instead of one at a time?

What kind of object is this nav-bar?

Behavior of a Non "TB Last" member underneath a TB Last Parent

Similar Messages

Maybe you are looking for