Behavior on subreport totals in the main report

I have a grouped report which receives two totals from each grouping's subreport via shared variables. In the main report I show the subreport totals for each group but cannot find a way, in the main report, to add the subreport totals together to become a report grand total. The running totals feature does not see the returned subreport totals and I cannot find a formulaic way of achieving a grand total. Has anyone managed this? Any help is much appreciated.

Lets step back a moment and see, you got Sub report places in say GF1 section. I suppose this formula of SV in the sub report is placed in the RF of the sub-report right ? what you might have to do is Change the sub report SV to assign it to a Running total...
The subreport SV is:
WhilePrintingRecords;
Shared CurrencyVar
AmountSpentRunningTot := #RTOTAL0 ({QuoteMaterials.qmmMinimumCharge})
**You might have to create a separate SharedVariable with some different name, place it in the RF of the SUBreport
Now I am guessing that this sub report repeats N times..for N number of GF in the main report...you might have to make a manual running total where you capture and add the 'GrandRunningTotal' coming from Sub report in every GF of the main report and then display it in the main report(s) RF...
hope i made sense...its little complicated to put it out in words...

Similar Messages

Display Subreport Totals in the Main Report

I am using CF10 Report Builder. I have a main report that show counts/amounts by award type for admitted and deposited students. I have a sub report that shows counts/amounts by award type and level for current students who have registered and those who have not yet registered. I need to show the totals of current students by level and weather they have registered or not.
I tried adding a sub report to show the totals but the sub report does not show up on the main report. Is there a way to do this that I am missing?

I created the sub-report because the award information is kept in separate
tables for incoming and returning students. I will work on combining the
the two.
Thanks
Bonni
Bonni Harris
Database Analyst
Eureka College
300 E. College Avenue
Eureka, IL 61530-1500
309-467-6467
On Tue, Apr 28, 2015 at 12:25 PM, EddieLotter <[email protected]>

Value in the subreport used by the main report?

How do I make so that a value in the sub-report can be used by the main report? Is there a way to make the subreport values "global"?
I am working from an older version of Crystal. Please let me know if this is self-explanatory in the newer versions.
Esther

Hi,
You can create a shared variable and assign the value to that in the sub report and same can be used in main report.
For more info on how to use shared variables, please check this under section Shared variables.
Thanks,
Raghavendra

After changing a subreport I loose data in the main report.

Hi All,
I have a main report that has two parameter fields and two subreports linked to the parameter fields. The two subreports access the database and work fine separately. When I add the two subreports to the main report it works fine. As soon as I make a change to a subreport it works fine standalone. But as soon as I update the main report (reimport subreport) the subreport no longer returns data to the main report. To get the report to work after a change to a subreport I have to delete the subreport from main and then add it back in again.
Does anyone have any suggestions?
I am using Crystal Reports 10 and I'm totally at my wits end. I've been working with Crystal for about 5 years and this is the first time I've seen this. Maybe I'm missing something small but I just can't seem to find the answer.
Thanks for any help,
Jim

Jim:
I usually edit my subreports from within the main report. I right click the subreport and then click edit subreport. This eliminates the need to reimport the subreport. I've done a lot of work with subreports and this always works for me.
I hope this is not too late and helps you out.
Ralph

Data Passing from a Subreport to the Main Report

Hello,I have been able to pass data from a subreport to a main report using shared variables. The Complete Reference: CR XI (p. 313) states that you should be able to now suppress the subreport to prevent it from showing on the main report, however this is not working. I want to get the data from the subreport and then further manipulate it in the main report, and I do not want the subreport shown on the main report. I tried suppressing/hiding the section where the subreport is placed as well as suppressing the subreport itself. The formula values on the main report become null when I do this though. Is it possible to keep the subreport off the main report?Thanks.

Search forums, this has been answered multiple times.

List down all subreports in the main report

Hi All,
I am developing reports in Crystal XI R2. I am working on the listing all the subreport names in the main report. I tried to use Filename function but it is not showing any report name even in the subreport itself.
Is it possible with any work around? Please help.
Regard,
Ashish

Hi ashish
Do you mean you want to have a hyper link of all the subreports from the main report.
main report
subreports
link1
link2
link3
You can just do like this insert->subreport->select the report name and place it whereever you want. You can select many reports like this.
Is this answers your question?
Regards
usama

Concatenate data in a Sub-report then copy in the Main report

Hello,
I'm using Crystal Report XI R2, I succeed to retrieve data as decribe in SAP Note 1212454 - How to Share Subreport Data with the Main Report
But when I hide section A, my values in section B are empty
So my answer is, how to retrieve dataset from the subreport group Footer Group concatenated and show it as a Header group data in the Main Report

I'm currently trying was is explained in:
1218324 - How to suppress a subreport but still evaluate and pass a shared variable
Symptom
In Crystal Reports (CR), subreports are frequently used to calculate and pass data to the main report. In many instances the business requirement is that the subreports not be visible to the end users. However, suppressing the subreport object or suppressing the section of the main report in which the subreport is located causes the shared variables to display incorrect data when passed to the main report.
How can you suppress a subreport but still pass a shared variable with the correct data?
Resolution
In Crystal Reports 9 and later, you can suppress a subreport but still pass a shared variable with the correct data to the main report by following the steps below:
In the Subreport
1. Remove all conditional suppression formatting formulas.
2. Delete all drawing objects such as boxes, lines, etc.
3. Suppress all remaining subreport objects such as database fields, formulas, etc.
4. For all sections that contain no objects, select the 'Suppress' option in the Section Expert.
5. For all sections that contain suppressed objects, select the 'Suppress Blank Section' option in the Section Expert.
In the Main Report
1. Select the 'Suppress Blank Subreport' option in the subreport Format Editor.
2. Remove all borders from the subreport object in the subreport 'Format Editor'.
3. Select the 'Suppress Blank Section' option in the 'Section Expert' for the section containing the subreport.
Background Information
When working with subreports, the 'Suppress Blank Section' option forces CR to evaluate the subreport contained within the section to determine if the final subreport output is blank. The 'Suppress' option allows CR to bypass the subreport completely, because the section is suppressed. By forcing Crystal Reports to evaluate the suppressed shared variable formulas in the subreport, the data can be correctly passed from the subreport to the main report even though the subreport is not visible to the end user.

How to show a Page Total in a Main Report that is calculated in a SubReport

Hi,
I have a Main Report and a SubReport with the detail.
The Report has several pages. I want to show a Page Total in each Page, retrieving data that is in the subreport (Detail).
I tried to use a shared variable, but the problem is that the formula fields are assigned at the end of the subreport, so I can't pass the value back (to the main report) until the last record of the subreport is printed.
I also can't show the Page Total at the subreport, because I have a particular format that I need to respect and only can be printed from the Main Report.
Is any way to do this ? At this moment, with the shared variables I'm getting 0 until the last record is printed.
Also, I can calculate the Page Total from outside Crystal Reports, do to there some fields that can grow, so I can't figure out how many record are going to be printed.
Thanks in advance!
Ariel

hello, this may depend on how the main report was actually paging...
1) do you have one group per page for example?
2) is the sub on a group footer level?
3) does the subreport use a different data set than the main report?
some suggested workarounds would be to
a) use a report header cross-tab (identical to the existing crosstab) that creates an array of values that you can access anywhere on the main report
b) place an identical cross-tab above the existing one, and suppress all of the subreport sections (not the section where the subreport sits) and then bring the value back to the main report
cheers,
jamie

Passing a variable from subreport to the main report

Hi guys, was unable to google this, so Im urning to you guys:
I was wondering whether it was possible to do this:
I have a subreport taking data from a table. In the main report, in the suppres condition of details section containing this subreport, I need to have a variable containing the total count of rows in that table. I know there are shared variables for that, but the problem is, that the variable in the condition is processed sooner than the one in the subreport.
Any ideas on this?
Thanks a lot

To Sharma:
Hi, unfortunately I can't. The subreport has its specific position in constallation with previous and following sections and must be right there.
To Raghavendra:
Hi, that was my first idea, but the problem is as I explained in my first message.
To both:
I have a table in subreport. This subreport is in main report positioned in details section "x". and I want to use that shared variable in the suppress condition of section "x". The problem is that the formula in suppress condition is processed sooner than the formula assigning a value to the shared numbervar inside the subreport.
and thats what im looking for - a workaround for that. btw im using CR 8.5
thanks again guys

Can a subreport select records based on values in the main report record?

Post Author: calvin
CA Forum: General
Perhaps my understanding of a subreport is incorrect as this is the first time I've used one, but it seems to me that the subreport should be able to use the values from the main report record in its (the subreport's) operations-but my subreport doesn't seem to be working that way.In my main report, I select a set of records from a 'request' table. I have a subreport in the detail section so the subreport is processed for each of the request records. That works, but I'm simply getting the same data reported multiple times. It's as if the subreport only uses the last request record rather than the current one. Stating it this way I can see that the problem might be evaluation time-it's processing the request records first, then processing the subreport, and only then printing everything. If this is correct then putting WhilePrintingRecords on the subreport should work-but the only way I know of to do that is in a formula. Can I call the subreport from a formula? Or am I totally off-track?Thanks.

Post Author: foghat
CA Forum: General
Have you established a link(s) between your main report and subreport?When viewing the main report, click edit --> subreport links and link the 2 based on whatever values from the main report you want.

Get data in a subreport based on a shared variable from the main report.

Goodd morning,
My question/problem is how to manage this scenario.
I am transfering 2 shared variables (pereiod from /period To, ) from the main report to a subreport and now i would like to get data in this subreport based on these 2 variables...
The problem is that i can not find the shared one in select expert icon...
Could anyone point me to solve this issue?
Thks for any help.
Jose Marin
Crystal Report XI SR3

Hello Jos,
I recommend to post this query to the [Crystal Reports Design|SAP Crystal Reports; forum.
This forum is dedicated to topics related to the creation and design of Crystal Report documents. This includes topics such as database connectivity, parameters and parameter prompting, report formulas, record selection formulas, charting, sorting, grouping, totaling, printing, and exporting but also installation and registering.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Crystal Reports Design queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Not having to refresh the data in the main report but only in the subreport

Hi SAP,
I have a report that uses a stored procedure in the main report and uses regular database tables in the subreport. The data returned from the stored procedure reports information from the month-end database (a cutoff point from the previous month's numbers) while the subreport reports information from the live database. This report gets run everyday to show the changes in numbers from the live database. Obviously the numbers from the month-end database remainds static until the next month's cutoff database is created.
My problem is that everyday when I run the report, the data needs to refresh from both the stored procedure in the main report and the live database tables in the subreport. How can I leave the data returned from the stored procedure static or as is without refreshing the stored procedure returned data and just have the subreport data refresh itself? The stored procedure really puts a strain on the database and I would like to cut-out the time to process the report as well. Does anyone have any ideas?
Zack

Hi Zack,
Try the following under Report options.
1. Clear the check box of "Verify Stored Procedures on First Refresh" in the Main report.
2. Select the check box of "Verify on First Refresh" in the sub report.
Hope this helps.

Refreshing subreport data on change of group in the main report

I have created three comma delimited strings in a subreports and then introduced them to the main report. The subreports are simple with no groups. I have one subreport for Authors, one for Departments and one for Schools. This is ok if I filter the data down to one publication. If I remove the filter then I get every instance of each of the subreports. ie all authors in a comma delimited string, all departments and all schools.
I have two groups in the main report, Publication Year (Group #1) and Publication Title (Group #2). This is where I have the problem. The data coming from the subreports show all instances as mentioned above. I want the subreports data to refresh each time the group changes. I need it to only show the necessary comma delimited string for each publication, not every instance.

Hi Abhilash,
The logic has worked correctly but the performance is really poor. Is this because I have there subreports doing similar funcitons? Is this a topic for another discussion?
Also, when I try to export the report to xls data only it starts the export but then a msg comes up on the screen relating to the second formula you gave me for comma delimited strings for schools:
SAP Crystal Reports
String length is less than 0 or not an integer.
This relates to the third line in the code:
Left(schools, len(schools)-2);
It then aborts the export. Is this a topic for another discussion also?
Thanks

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

How to make a common parameter for two subreports in the main report.

Hi,
I have a crystal report which has 2 subreports in it. Both the subreports have the same code and I need to create a parameter for Project Cost in both the subreports for filtering the data.
When i create the same parameter in both the subreports, i see two parameters with same name on my prompt page while refreshing the report. however I just want 1 parameter on my prompt page and data should get filtered in both the reports.
Can anyone please suggest something, How can I do that? is there a way for sharing same parameter between two subreports?
Thanks!
Neha.

hi Neha,
here's how to do this:
1) create a new parameter with the same name on the main report
2) right click on your first subreport and choose Change Subreport Links
3) in the Field to Link To list drag over your new main report parameter
4) open the Subreport Parameter Field to Use select menu and choose your subreport parameter
5) repeat steps for the 2nd subreport
now you'll only get prompted once.
cheers,
jamie

Behavior on subreport totals in the main report

Similar Messages

Maybe you are looking for