Behaviour of checking Allow administrator interaction when the private key is accessed by the CA ?

Setting up a new standalone root CA what is impact of selecting 'Allow administrator interaction when the private key is accessed by the CA' ? not sure yet if we will be using a HSM module (which I know is a valid reason for selecting). I don't
want to limit our future options by not selecting this. Is there any impact to selecting this if we end up not using CSP / HSM ? and can the value be changed easily once the Root CA is installed ?

This checkbox enables private key strong protection. This means that you will have to enter administrator password or confirm action each time private key is used. It will be used each time when new certificate/crl is issued. And when service starts. If
you are using HSM, you should consult with HSM documentation to determine whether your HSM requires this setting. As you don't use HSM by now, then you should not enable this checkbox, because you won't see any prompt dialog on server core.
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Check out new:
PowerShell FCIV tool.

Similar Messages

TS3899 I can no longer send photos in an email from my iphone 5. It uploads the photo to the "new message" page - and then it freezes. I can use safari and check my emails, and when the email part is frozen the rest of the phone works fine ! any advice?!

I can no longer send photos in an email from my iphone 5. It uploads the photo the the "mew message" page and then it freezes! I can use safari and check my emails, and when the email part is frozen I can still use the rest of my phone. Any advice ?!?

Hi, ireland a.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
iOS: Force an app to close
Once these steps are processed, attempt to send the photo again.
iPhoto for iOS (iPhone): Send photos by email
http://support.apple.com/kb/PH3271
Regards,
Jason H.

How to check which administrator had modified the AD Group properties

Dear Sir,
Some one had modified a Distribution group (removed email address). I checked it in group properties and last modified was on 22/09/14. How to find which administrator had modified.
I dont have access to domain controller. Is there any way to find it?
thanks in advance.
Karan

Hello,
this will be logged on DCs and also auditing must be configured correct that this will show up in the event viewer from a DC.
Without access to the DC contact your administrators and let them find out.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

To not allow billing cancellation when the invoice is cleared

Hello
I would like to know if there is any way to avoid the cancellation of an invoice via VF11 when the invoice has been already cleared.
Thanks in advance.

You can write a user exit by checking the status of accounting document associated with the billing document.
Pl give points if you find my answer helpful / points to correct direction / resolves.
Thanks,
Ramesh

KB-2813237 Windows 8 CryptoAPI crashes Outlook when Private Key is accessed on Highest Security Setting

Hello,
Do Microsoft have a updated hofix(2813237) that works for Windows 8.1 Pro machines?
Kind regards
Simon

Hi,
Since this is a known issue, there's a workground which worth a try, please refer to the following thread, reply posted by duchiant
http://social.technet.microsoft.com/Forums/office/en-US/f543b04d-d510-4444-b803-1759f6c312c8/outlook-configured-on-windows-8-required-elevation-in-order-to-access-private-key?forum=outlook
Add: I think we might need some more time to see whether MS can release an hotfix for Windows 8.1, we will keep an eye on this.
Yolanda Zhu
TechNet Community Support

[cs4.0]cant proceed the setup page...stuck at the checking profile system 90%(when the cheking reach 90%, pop up the setup page then gone le, cant install)...help pls

im using vista home premium sp2...previously i run the installer that which copy from my friend,but the file did not complete copy....so i recopy again the installer file and run again.the problem occur(checking system profile reach till 90% then pop up the loading setup page and gone suddenly,therefore cant install it)
any solution...pls help pls....T.T

You must to view the section: http://www.oracle.com/technology/software/tech/windows/odpnet/install10202.html... there you will find all the information that you need for the installation in windows vista. I could to install the ODAC and i have not any problem.

Check Form for Errors When Digitally Signing?

Greetings,
I am using LiveCycle Designer ES3. The target version of my form is Adobe version 8.
My form is initially completed by a document generator, then forwarded to a reviewer. The reviewer will then use the form to document his/her determinations (approved, disapproved, etc) of the material the document generator submitted for review. Once the reviewer is done with his/her determinations, he/she digitally signs the document using the signature field created in LiveCycle. Once the document is signed, it is locked down and unable to be edited further.
Is it possible to have my form check for oustanding errors when the reviewer attempts to sign? Also, is it possible to not allow the reviewer to sign if errors are present?
Thank you in advance for your help.

To clarify, the document generator only fills out a few fields. The reviewer completes the rest of the form, so the reviewer would be the one making the errors.

Check box showing double when PDF opened in Preview

I'm setting up a simple check box functionality on a PDF my company sends out. I noticed the check boxes look strange when the PDF is opened up in Preview on Mac. Not sure about PC as we don't have one here. It appears to look fine in Acrobat but I believe a good portion of our clients will use Preview. What you see in the image below is the result when I make a check box and change the color to blue green. The black check mark over it comes out of nowhere. My temporary work-around is to make the check mark art invisible so just that crappy black line shows up instead, although I hate the way it looks.
Any help is much appreciated, thanks!

You should always include a link to the FREE Adobe Reader with advice that best results will be seen using it when you distribute a PDF.
Of course you cannot control what others will use, but if you expect them to use Preview you need to dumb down the design accordingly.

How do I transfer my music from my laptop to my iPhone? I've already checked the sync only checked songs and videos box, the manually manage music and videos box. I only want to sync the songs I checked, but it transfers all the music.

I dont want to transfer all the music just the checked ones. My macbook transfers all the music from my library to my iphone. I dont get it. Please if you could help that would be terrific.

Hi RaulRod,
Are you pressing the Sync button to transfer music after connecting your iPhone or do you have the option checked to 'Automatically Sync when the iPhone is connected?'
Have you tried manually dragging and dropping music from your library into your phone?

Can't Export a Certificate with the Private Key

I have downloaded a
Symantec Enterprise Mobile Code Signing Certificate from email link. And the certificate was installed with no errors. Now
when I'm going to export the certificate it will NOT allow me to export with private key. The option "Yes, export with private key" was grayed out. From MMC, add snap in certificate > local computer > certificate > certificatename. In this
location "I can see the certificate image with a key on it". Is this mean that the import is successful with private key? If so, how to export correctly? Kindly help please!
http://i1234.photobucket.com/albums/ff405/i_kiennt/Screenshot2_zpsaf770a8b.png
http://i1234.photobucket.com/albums/ff405/i_kiennt/Screenshot3_zpsde23204d.png

Hello MrTrungKien,
Please share us a screenshot about The option "Yes, export with private key" was grayed out.
Please take a look at the following article about exporting a Certificate with the Private Key.
http://technet.microsoft.com/en-us/library/cc754329.aspx
Yes, export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
It is marked as not exportable so users cannot export this certificate.
Please contact Symantec to confirm if the key is exportable.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I have FF and win7. Fonts turn to weird characters at more then 75% zoom when the checkbox "allow webpages to choose their own fonts" in the contents option advanced is checked, when forced to calibri this behaviour doesnt occur An aexample of that is

I have FF and win7. Fonts turn to weird characters at more then 75% zoom when the checkbox "allow webpages to choose their own fonts" in the contents option > advanced is checked, when forced to calibri this behaviour doesnt occur
An aexample of that is the product title on the product of this website:
https://www.xstreetsl.com/modules.php?name=Marketplace&file=item&ItemID=2424553
While switching to double check this I just saw that this also happens in this very window in wich i am typing my question now. If i copy and paste this text to for example notepad or anything else, it shows up like normal text.
== This happened ==
Every time Firefox opened
== i installed firefox on win 7

This issue can be caused by the bitmap version of the Helvetica or Geneva font or another (bitmap) font that can't be displayed by Firefox in that font size.
Firefox can't display that font in the specified size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or find a True type version of that font that doesn't have the problem.

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library option and check the Selected Artist - on

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.

There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation.

"Dreamweaver is currently interacting with the server. Since putting a file on save requires interaction with a server as well Dreamweaver can not currently perform this task. Please try again when the server task is complete."

get rid of this [abusive content removed by moderator]

Wow this is a long running thread!
I've discovered, since having to start using check in/check out on a site with multiple editors ('put on save' being a minor version of this), that Dreamweaver is like a nosy neighbour, more concerned with what is going on outside than with your petty demands. So Dreamweaver is constantly checking to see whether any files are in use by anybody else. When it is good and ready it will allow you to interact with the server. If your connection is anything other than rocket powered you will spend ages waiting and looking at messages such as the above. It doesn't have the sense to stop and just check the file/s you want to put or get and then let you get on with it. And of course the bigger the site, the more checking it has to do. If your connection is really slow you will have the added pleasure of constant freezes, aberrant behaviour and crashes. I have this with CS4. I don't know if CS5 is any better. And don't expect any improvement on CS4. You are stuck with it.

My mac book pro just stopped allowing sound and when i restarted it, it does not let me use any of the icons on the desktop, then allows me to use them after 3 minutes,and then still NO SOUND! What do i do? PLEASE help.

I have an issue with my computer. the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011. so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out. When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT it is a light gray color and it does not let me check the setting off. please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
*******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************

That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

Firefox has trouble initiating, and when it finally does, every time I attempt to interact with the application it stops responding.

Firefox won’t initialize: I can open any program on my computer except for Firefox so it isn't that my computer is slow. It doesn't open at all no matter how long I wait. I've left the room and let the computer run before and it still wasn’t running when I came back. After a few clicks it finally it comes up, and I have to wait because I’ve clicked multiple times so of course it's going to open multiple times. When I'm online after successfully closing all but one Firefox window so that I don't crash my poor laptop, every time I attempt to interact with the program via clicking a link, opening a new tab, or typing something into the URL bar, the program freezes and goes into the not responding stage. Rarely, an unresponsive script message will pop up.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Behaviour of checking Allow administrator interaction when the private key is accessed by the CA ?

Similar Messages

Maybe you are looking for