Behaviour of Smart Cover on iPad Under iOS 7

Since upgrade to iOS 7 I can't seem to get the Smart Cover to work as I would expect.  Assume that I have enabled the "lock / unlock" in settings. Pass code lock is off, and auto lock is set to 2 minutes.  Any suggestions welcome.

Thanks.  And worth a try.
Strangely, I have a Logitech thin keyboard / cover that *does* work. And (worryingly) I can make the device sleep with the Smart Cover by taking it off the iPad, and waving the magnet at the top right of the iPad screen. This is a current generation of the iPad, but an earlier generation of the Smart Cover. Could it be that there has been a design change that makes the earlier cover work less reliably?  Or might the strength of the magnet in the Logitech cover have "done something" to the sensor to make it less easily activated?
All part of life's rich tapestry.

Similar Messages

  • Is apple providing ipads under iOS 6? Even refurbished?

    Hi,
    My iPad 3 started to show strange behavior yesterday, pretending to "download" apps when I was trying to launch them, then failing to download them.
    No way to close them, only delete them.
    Thus I decided to restore the latest backup, not an update. I was under iOS 6 and don't want iOS 7 (aka Android).
    Despite the fact I said NO to all update request, and to stop asking me about updating, it did.
    Now I'm left with that 7.1.1 tablet.  I'm very upset to say the least.
    Since there is no way to go back to iOS 6.n, does anybody know whether Apple still provides iPads under iOS 6 in the refurbished program or are they forcing that iOS7 on each of them now?
    Any link? I'm not willing to buy from eBay, only an official refurbished iPad under iOS 6.
    Thanks for any help

    To globally close this topic...
    I found a Wifi64Gb with iOS 6.1.2 and will remain with this, just as I won't move out of Maverick for the same reasons (next OS/X is likely to get the same iOS7 "design").
    No, Win95/7 did not excite me at all. Windows products are no OS to me, even though 90% of my developments are targeted at them (I have no choice).
    No I never changed the interface of my software in a manner that the end user finds something totally different. The only adjustments were what was requested by my users, like menus, functionalities, but not the look and organizational flow.
    I changed designs and/or way of using the software only for new products that started with an empty user base.
    Yes, if I toss Apple in the future for Android or Windows it's because at least I would buy the "real thing", not an OS that then changes to be a pale copy of an already bad product, without questions asked, imposed and no way to get back.
    At least when MicrobeSoft released the "ribbons" instead of the menus, you still could use previous Office versions and buy them, you were not forced to get the Ribbons.

  • Can Smart cover Damages ipad mini's SPEAKERS ?

    HI am from India,
    I was using a Smart cover since 7 Months. It was iOS 6 when i started using it Now i Updated my iPad mini to iOS 7 and i experienced the Distortion in Left Speaker everytime whenever i use to restart my Device & Destortion was use to clear automatically when i restarted device again. So i was just curious about this. So i just want to know is there any relation between Smart cover's Magnet and the speakers ?
    Note :I dont know the Smart cover is Original Or Duplicate.I restored iOS 7 from service center and now theres not problem YET. So now i was just thinking wether i use smart cover Or not ?

    An easy way to tell if the cover is affecting your speakers is to remove it and use the device as you normally do. If the cover is/was indeed affecting your device's speakers, then you'll get no distortion and continue to get no distortion. Then go back and use the device with the cover again to see if you again get the distortion. Do this "with cover"/"without cover" a few times to verify. This is also known as "the process of elimination".
    If the cover is causing the issue (not likely in my opinion), your ultimate solution is to get a new cover.

  • Will iPad Smart Cover stain iPad?

    Hi all,
    Sorry if this is a stupid, OCD-related question... but I just bought white iPad with Retina and red leather smart cover to go along with it.
    I'm thinking about whether or not returning the case, because I read a message somewhere that the interior of the red case can stain the white lining around the edges of the ipad.
    Is this something I need to worry about? Or am I just being paranoid?

    If you are thinking about putting a screen protector on it, I know a simple trick how to avoid dust under the protector. Go to a room with closed windows, close the door, sit down with the iPad at a table and wait for around 3-5 Minutes without moving too much (while watching tv for example). Most of the dust should be on the floor, and not in the air anymore. Now you can clean the screen of the iPad and put the protector on the screen. Don't worry about trying two or three times, without the dust, you can try much often to get a perfect result. I already put 4 screen protectors on tablets and more than 15 on phones and iPods :-)
    The glass shouldn't get stain, it is too slick for the material to stick on the glass.

  • How is it possible to cancel (not suspend) a video download from iTunes Store (iPad under iOs 6)? (I do not have sufficient storage space on my iPad)

    Hi,
    I am facing the following difficulty with my iPad (model MD369NF/A) under iOs 6.1.3.
    I have bought 2 videos on iTunes Store, but I do not succeed in downloading them: an error message mentions that iPas does not have enough storage capacity.
    As a matter of face, when I look at the way the storage is used, I find “Others” for around 10 Go (is there some king of reserved space for the downloading of videos from iTunes Store?), and only a very small number of Mo available.
    I would simply like to cancel the downloading of the 2 videos, and hope that it would free the "Others" storage space (in the hypothesis that "Others" is space reserved for videos once downloaded), but I do not manage to do it. I can suspend the downloading, but I do not see how to cancel it.
    Would you have a solution to propose ?
    Thanks in advance for your help,
    Nicolas

    Hey Nicolas36,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article outlines issues with free space, capacity, and a large amount of "other" space. You'll want to connect your iPad to your computer with iTunes to follow the steps:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/TS1503
    One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
    - Turn off the music or photo sync option in iTunes for the device.
    - Click Apply to sync the changes to the device.
    - Turn the music and photo sync options for the device on again.
    - Click Apply again to try to sync the device to iTunes.
    Thanks,
    Matt M.

  • Smart Cover and iPad 3

    I have my new iPad and I went to the Apple Store to get a couple accessorys and I was facinated by the Smart Cover. So I bought it got home and it worked fine. The Sales person it would fit just as on an iPad 2. So I never owning an iPad 2 thought would work fine. But I noticed an issue. when folded to the back of the device it doesnt stay attached well and becomes uncomfortable to hold. Is this normal or something due to the new iPad?

    ya it doesnt, the smarcover is good for folding the smartcover for 3 orientations (landscape in "movie mode" and "type mode", portrait), it is not designed to lay flat at the back, so if you add pressure the smartcover will come off.
    This is mainly because the magnets where it hatch into is at the back.

  • Apple iPad 2 Smart Cover For iPad 1

    Helo folks
    Since no difference between first and sec gen. Of pad's screen , length and width sizes, i want to get a ipad 2 smart cover for my original ipad 1 , possible ? .. It should
    ?

    The display size and resolution are the same, the iPads themselves are not exactly the same dimension. Also, the new iPad has magnets inside of it help the smart cover attach itself to the new model.
    You would be wasting your money, the Smart Cover is for the iPad 2 only.
    Dah•veed

  • Old Smart cover on iPad Air...?

    I have a lovingly kept 2011 black leather smart cover on my iPad 2. Will this work with a new iPad Air, or must I buy a new cover?
    Cheers

    The older Smart Cover is not compatible with the iPad Air. The Air is quite a bit smaller so the cover would overhang. Also, the magnets that hold the cover to the device will likely not line up either nor will the embeded magnets in the cover that trigger the sleep/wake function when the cover is opened/closed.
    Just splurge for new Smart Cover for the Air. It's worth it.

  • Smart cover new ipad

    Does anyone have trouble with Apple smart covers being a little loose when folded over the back of the new iPad?  My smart cover fits perfectly on my iPad 2, clinging tightly to it when closed over the front and closed over the back.  When attaching it to my "new iPad", however, it clings tightly to the front of the new iPad but not the back.  The net effect is that if I fold the smart cover over the back of the new iPad, and hold the iPad with my left hand, the smart cover will dangle open in response to the slightest of motions.  This dissatisfies me greatly.

    My smart cover never did stick to the back on my 2 or 3. I don't believe it was meant to. When I am holding it I just take it off and reattach it as needed. I think the reason it doesn't work on the 3 as well as it did on the 2 in your case is the magnets are near the surface of the iPad and the New iPad is slightly thicker therefore putting more distance between the magnets. This would make them weaker. I don't think it is a design flaw because I don't think they were ever meant to stick to the back in the first place.

  • Leather Smart Cover for iPad Mini?

    I hope Apple creates a leather version of the Smart Cover for the iPad MIni.
    The polyurethane version - while effective - feels rather cheap and flimsy.
    Surely, it would be quite easy for Apple to design a leather version.
    Perhaps they are waiting to release it with the Retina version of the iPad mini.
    Fingers crossed.

    Apple has not announced such a cover that I've seen, and until they do, none of us will know more than you do. You can express your desire for such a cover here, if you wish:
    http://www.apple.com/feedback/ipad.html
    Regards.

  • Smart cover on Ipad air

    Hello,
    I have the new ipad air, and my smart cover not working.
    in the settings , i d'ont have the option "activate/desactivate"
    i have try to reset all the settings, and to make a complete restore, but the result is the same.
    Somebody can help me?

    for information my case is a tucano
    Angolo folio case
    http://www.tucano.com/shop/angolo-folio-case.html

  • Smart Cover for iPad Air does not stay closed

    The iPad Air Smart Cover is a different design to the previous versions of the Smart Cover, it has no metal spine on the left side and the magnets do not appear to be as strong as the previous versions. Presumably Apple has done this to reduce the production cost, and increase profits.
    The result of this is that if one holds the iPad with the spine of the cover in the left had and the thumb on the first section of the cover and then tips the iPad over to the left the cover opens when the iPad is tipped past the vertical, towards the left side. This is made worse  when the iPad is fitted with a third party back protector case which fits over the front edge slightly.
    This problem did not exist with the earlier iPads and their Smart Covers. We have an iPad 2 and iPad 3 both fitted out with Smart Covers and third party back covers. Both of these can be tipped over completely, upside-down, while holding them (in the manner described above) and they do not open.
    We tried our new iPad Air Smart cover on other iPad Airs at the store (not Apple) and we also tried other Smart Covers on our iPad Air. They all had the same problem.
    The only fix will be if Apple recognise the problem and improve the design of the Smart Cover
    NOTE: We also tried the Smart Case and this had the same problem.
    So, my questin is to Apple: When will I be able to exchange the Smart Cover for an updated version that does not have this problem?

    I also have an iPad Air, and a genuine Apple Air Smart Cover. Cover stuck fine in the closed position (even if upside down) for several months. Cover also stuck to the right hand back of the iPad Air when open and folded back, even if upside down.
    About a week ago, the right hand edge of the cover started being slightly repelled from the right hand edge iPad Air when closed. This left the iPad at risk of not actuating the on off switch, or at least being very sensitive to any movement.
    The cover still stuck to the back of the iPad Air when open and folded back.
    I believe Apple have magnets in the right hand edge of the cover, not just a passive strip of iron. If so, the polarity between back and front of the cover will be opposite. I believe Apple are somehow arranging the magnets in the right hand side of the iPad Air to change position depending on whether the cover is closed on the front, or open and folded to the back. I suspect Apple somehow allow the magnets in the iPad Air to pivot or move to provide a decent attraction both front and back regardless of cover polarity.
    When I get hold of some magnetic viewing film I will check the magnet locations further.
    My iPad Air went back to attracting the cover to both front and back a day or so ago. I had made no alterations. This correction happened after leaving the cover closed (and hovering mid air by a milimetre or two) overnight.
    I believe the problem is in the iPad Air, not in the Smart Cover.

  • Two versions of skype on my ipad under ios 7

    hi,
    i just dscovered, that there are running two versions of skype on my ipad under ios7. the latest one and a bit older version. how could it be? the appstore automati ally overwrites older versions. anybody has the same problem? i was able to delete it without any problem, but wondered why there can be two versions of the same programm. my ipad is NOT jailbreaked.
    thanks

    You can more than one copy of the QuickTime Player app but you can have only one QuickTime set of "frameworks".
    Move 6.5 from Applications folder to your Desktop and change its name (I used 6.5 in the name).
    Double check the QuickTime Sys Prefs/Register to make certain it is Pro.
    Install version 7.
    Now you have two QuickTime Player apps. Old on the Desktop and new in the Applications folder. Use the About QuickTime menu in each and you'll see 6.5 is running "on top" of version 7.

  • No event updates on iPad under iOS 7.04

    Perhaps this was always a problem, but I have only noticed it since upgrading our iPads (1 iPad2 & 1 iPad3) to iOS 7.
    When I modify an event in Outlook 2013 and send an update of the invitation to an iPad user
    No add/update option is visible in iPad's Mail.
    No change is visible in the iPad Calender.
    When clicking on the ics attachment in the received update message iPad Mail, the information displayed is the data of the original invitation / event, not the updated information.
    This applies to changes in the subject, location and notes fields, I haven't yet tried changing the time/date.
    Even if I uninvite an iPad user and send an update
    No option to remove the event from the iPad Calender is visible in Mail.
    The only way I have found to remove the event from the invitee's iPad Calender is to decline it on the iPad.
    What is going on here?
    Why aren't the changes / updates in the events / invitations recognized on the iPad?
    How can I get this to work as expected?
    TIA for any tips!

    P.S. The problem also occurs with invitations sent by other e-mail programs (Thunderbird/Lightning) and changes in time are also not respected.

  • ICase Smart Cover For iPad What Do you Think?

    Just come across this iCase
    http://www.icasecovers.com/ and wondering if any of you have used it?
    Cheers

    Restart - hold the sleep button until the red slider appears and then slide to shut down. To power up - hold the sleep button until the Apple logo appears.
    Reset - Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider.
    Restore - Hold off on that one for now
    You can try this as well - close open apps from the task bar. Double tap the home button and the task bar appears with all of your recent apps. Tap and hold down on one of the icons until they all wiggle. Then tap the minus sign in the upper left corner of the icon to close the app. Close all of the apps in the task bar. Then restart your iPad as described above.

Maybe you are looking for

  • Separating library into mp3 and lossless libraries?

    I have imported most of my music into iTunes using lossless format, but have been making mp3 copies of some of my music to place on my ipod. This is not ideal, because, for example, when picking songs to play the genius function will often pick the m

  • I have a new pc how can i find my old music

    i have a new pc how can i find my old files

  • Flex mobile live streaming

    Hi All,   I am trying to display a live stream from rtmp server. Below is my code. <?xml version="1.0" encoding="utf-8"?> <s:Group height="100%" width="100%"          xmlns:fx="http://ns.adobe.com/mxml/2009"          xmlns:s="library://ns.adobe.com/f

  • Output type PO - NEU spool request

    Dear Experts, In my scenario, PO determined standard output type NEU which is in yellow symbol. when i investigate output determination, system updated output found however, spool request is not created when i i click on processing log. Any specific

  • How to popup User defined window(No object table)

    after clicking defined new  value in combobox of user defined screen(screen painter)