Behaviour of WAD when changing result calculation

Hi,
when I´m changing the result calculation of one key figure in WAD (Web Application Designer) through right mouse click in the web browser (Internet Explorer) where the whole results are displayed the calculation is sometimes done and sometimes not.
Is this behaviour in the web browser normal Is this a technical issue?
For example: I have the result "last value" for one key figure (the whole range of values for each single month is shown in the column) and then I click on the key figure and select "calculate result as" > Sum.
Sometimes the calculation is done and sometimes not. I think the whole query needs to be updated (refresh) in the web browser after it doesn´t work and then it works.
Thanks in advance!
Edited by: saplaz on Jun 22, 2011 10:45 AM

Hi Dimitry,
this was a limitation. But with notes 1093146 (BEx Analyzer) and 1013584 (BEx Web Analyzer) these limitations were removed.
Regards,
Gregor

Similar Messages

Position of items in a region changes when changing region display point

Hi all,
I encounter a strange behaviour of items when changing the display point of a reports region from default (Page Template Body (3)) to anything else.
If set to Body (3), my items are correctly displayed above the report, but else they are displayed below.
Changing the sequence numbers does not affect this.
To clarify what I mean I created a sample application:
http://apex.oracle.com/pls/otn/f?p=16478:1
Is there any possiblity to influence whether items in a reports region are displayed below or above the report table? - I did not find anything...
TIA,
Felix

If you read the description of those other regions you'll clearly see "items below region content" rather than "items above region content", like the page template body region #3.
This is one limitation of the ApEx region templates that some would like to see improved - meaning, allowing for more flexibility.
Earl

Is it possible to make a calculated field only appear when the result is greater than 0?

I am using Adobe Acrobat X Standard. I have created a form that has caculated fields. However, the fields always show the "$0.00" when it doesnt have anything to calculate. I would only like a result to appear in this field when the result is greater than 0. Is this possible?

The use of currency and percentage signs always behave this way since the display format is a character string and not a plain number.
You will have to use some custom JavaScript in the Custom JS calculation, the custom format format, or the validation script.
There is not a lot of documentation for this, but Acrobat JavaScripting Guide Version 6 has some infromation about usin the AFNumber_Format built-in function.
If your users are using version 8 or below, you will need to adjust the format of the field.

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

Webapp_searchresults sort parameter not active when redirecting results to page?

Good morning/evening,
I am not sure if I missing something, but according to the documentation that I have found so far http://helpx.adobe.com/business-catalyst/kb/modules-quick-reference.html#Web-apps the syntax for the web apps sort module results is :
{module_webappsresults,notUsed,targetFrame,useBackupTemplate,resultsPerPage,hideEmptyMessa ge,rowLength,sort}
when the results are on the same page as the search form, the sort parameter works. in this case :
{module_webappsresults,,,,18,true,,DATE}
when I change the form action to direct the results to another page, replacing PageID={module_oid} with ID=/Painting/Select.html
The page in question has the same {module_webappsresults,,,,18,true,,DATE} as above. The selection based on the search form is correct, however the sort order is no longer in effect. The order is alphabetical by name.
Is this a known behaviour or am I missing something? Is there someting else I should be doing when directing results to another page ?

Good morning/evening,
I am not sure if I missing something, but according to the documentation that I have found so far http://helpx.adobe.com/business-catalyst/kb/modules-quick-reference.html#Web-apps the syntax for the web apps sort module results is :
{module_webappsresults,notUsed,targetFrame,useBackupTemplate,resultsPerPage,hideEmptyMessa ge,rowLength,sort}
when the results are on the same page as the search form, the sort parameter works. in this case :
{module_webappsresults,,,,18,true,,DATE}
when I change the form action to direct the results to another page, replacing PageID={module_oid} with ID=/Painting/Select.html
The page in question has the same {module_webappsresults,,,,18,true,,DATE} as above. The selection based on the search form is correct, however the sort order is no longer in effect. The order is alphabetical by name.
Is this a known behaviour or am I missing something? Is there someting else I should be doing when directing results to another page ?

How do I output the smoothest video when changing or mixing frame rates from the original footage?

I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution. For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far. I'll try to be as brief as possible, but if I do go into too much detail, I apologize.
My original footage is AVCHD 1080p - 60fps. (my camera only does 60fps...specifically 59.94fps) We're not talking interlaced video here, I'm staying away from that. This is definitely full frame, progressive video at 60 frames (not fields) per second. My output will ultimately be for the web. I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results. I am using Premiere Pro CS5.5 along with Media Encoder. Here's what I've done and the results I've observed:
1. I created a sequence with 1080p - 59.94fps settings to match my original footage. I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps. The 59.94fps output files looked absolutely great, as would be expected. Extremely smooth. The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps. This is expected since it's half the frame rate as my original footage. However, my question is this: What exactly is Media Encoder doing when "down converting" from 60p to 30p? From a technical stand point, is it dropping every other frame? I'm just curious to understand exactly what it does. I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files.
2. Just to see what would happen, I created a sequence with 1080p - 29.97 settings. I then output both 1080p and 720p versions at 29.97fps. The video was much more choppy in these cases, even with Frame Blending on. Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above. Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
3. Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files. Premiere handled it great, no issues there. However, I had some interesting things happen when I output the files. Here's what I did: I created a sequence with 1080p - 59.94fps to match my original footage. Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video. The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage. I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results. Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates. I'll explain my results in a moment as they are a bit convoluted, however, here is my question: When mixing frame rates and trying to output the smoothest video, am I going about this the right way? I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
The results to #3 above were as follows. Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence. It seemed to produce smooth results either way. Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general. However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy. In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here). I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue? I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file. Doesn't seem to have issues with the 720p files I created. But it sure threw me off with my testing because I then started second guessing the settings I was using. My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer. Thoughts?
4. Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit. It seems that the original footage has more contrast and saturation than the output files. I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage. And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
5. Regarding Frame Blending, when is the best situation to enable this option in Media Encoder? I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
6. Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion. However, I know that 60fps isn't the best or easiet frame rate for web delivery. It seems 30p is more the standard. Are there any integrated web players that would play 60fps? Can you get 60fps video on YouTube/Vimeo? If yes to any of these questions, can they do 720p and 1080p at 60fps?
Those are all my questions. I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post. Thanks in advance for any insight, I really appreciate it.

Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks!

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

When changing database directory in lk6.5, no alarms are logged anymore.

When changing database directory in lk6.5, no alarms are logged anymore. Traces are running ok, only any query in MAX concerning alarms, will result in an empty response

Hi Ryan,
I tried many ways. First as you described. Second; delete all databases (with MAX) and start lookout, hoping lk would make al necessary settings.
I tried short path name, long path name. All the same results; database will be made (or manually with Max or automatically by lk), all traces works, only NOT the Alarm logging. (database isn't corrupted, while a query done in MAX don't result in an error, just empty result).
I the meantime I found something;
C:\Documents and Settings\my name\my documents\Databse --> traces works, alarms not
C:\Program Files\National Instruments\Lookout 6.5\Database --> all works
So it seams that specificly "my documents" does'nt work for alarms, just for traces (????)
I also found the following message when trying to export the alarms; "The given Citadel database is not currently configured to log alarms to a relational database." Does this ring a bell?

/dev/null changes result, why? ( How to know if svn repository exists )

Hi,
Because I am writing last few weeks some scripts for a project, I do want to put those under svn ( subversion ). As a scripting exercise I want to be able to create Repos and project folders in one go and add changes to the repo's svn conf files.
I want to check if there is already an existing repository and if the name=passw line is already added to the passw db.
I did use:
svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c
to check for the error message returned by svnlook
svnlook: Can't open file '/Volumes/Development/_svnRepo/SSHToolNew/format': No such file or directory
and want to continue doing my stuff when the result is bigger then 0, otherwise create the repo first with some options.
With the following info
/Volumes/Development/_svnRepo/SSHTools exists
/Volumes/Development/_svnRepo/SSHToolNew doesn't exists
using ( typed in the sh )
svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c
1
echo "rv:" $?
1
gives as result 1 in the shell and when using echo "rv:" $?
however
svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c &> /dev/null
echo "rv:" $?
0
gives 0 as result.
And when the folder do exists it return the opposite!?
Just to understands the happening. Why the difference with &> /dev/null ?
What do I mis here?

Hi Thanks you for your reply,
I want that the result goes into a var so that I can compare it in an 'if' statement.
If I leave & out then I get the following same result
bash-3.2$ svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c > /dev/null
bash-3.2$ echo "rv: "$?
rv: 0
It should be one ( 1 ) because the result count is one. Or am I wrong?
So basicly, why is it changing the result? or is $? not the result of my line?
What is the best way to check if f.e a command is failed like the one I use in an if statement? Can I move the result directly into a var, something like?
bash-3.2$ svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c | MyVar=$? ( or whatever needed )
Thanks again

Locale Input changes on Mac OS X Lion when changing the view state

On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This is obviously not the correct behavior (the input locale should stay the same as defined on the computer).
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx">
 <fx:Script>
 <![CDATA[
 protected function gototest2(event:MouseEvent):void
 this.currentState = "test2";
 protected function gototest(event:MouseEvent):void
 this.currentState = "test";
 ]]>
 </fx:Script>
 <s:states>
 <s:State name="test" />
 <s:State name="test2" />
 </s:states>
 <s:Button label="go to test" includeIn="test2" click="gototest(event)" />
 <s:Button label="go to test2" includeIn="test" click="gototest2(event)" />
 <s:TextInput includeIn="test2" />
</s:WindowedApplication>

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.

Error when changing BPM: "Insufficient access privileges"

Hello, Logic Express gurus:
I am just a lowly fitness instructor trying to mix her own music (self taught DJ). When changing the BPM here's what I do:
I double click on the song track, then from the window that pops up, I click on the "Factory" pull down menu, then choose "Temp and Pitch Machine". When I change the BPM to the desired tempo and click "Process & Paste", I get the following error:
"Insufficient access privileges for operation (Result code -5000)", then another error stating:
"Error when creating temp file!"
It used to work beautifully. Can anyone assist me? Thanks.

Thanks for the reply, Matt. I tried your suggestion, but it did not make a difference in the tempo. I am bringing in MPEGs, by the way.
My method was working fine until I began getting this error message. Any further suggestions from you or anyone?

Messages were issued when costs were calculated (see log)

Hi,
When I am creating the production order ( T Code: co08 , MTO scenarios and with reference to sale order ) but i am getting these error messge.Error when calculating costs see log like:
Messages were issued when costs were calculated (see log)
Message no. CK262
and also iam not getting planned cost .in the production order i saw log worning message like
Object was not costed
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
o     Items in the BOM
Display BOM
o     Operations in the routing
o     Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.
pls give me clarification ASAP
Regards
SAPCO

Hi Hisapgaru,
The error on product costing can be cause by several message which can be caused by poor master data maintenance. It does not mean, the error are found on every message line, you have to analyze the material number that involve in the message using the information provided by log message (procedure).
To analyze product costing in a comprehensive way is by using CK11N. By this t-code you can display the product cost result from 3 pespective: Cost element, costed BOM or cost component.
You can event check the product costing parameter from this CK11N/CK13N(display product costing). Without doing analysa to product costing, you cannot point out what cause the problem.
Solve the problem from product cost planning side first, then after calculation free of error, you can go back to production order activity.
Best regards,
Irhasni

Mail.app doesn't hava connection with imap server when changing network.

Ive got a strange problem after upgrading OSX from 10.6.8 to 10.8.4.
I have got a xserve, with osx 10.6.8. (mail) server installed on it.
When i am in the office (LAN) mail works just fine. if iam home and wake my macbook from sleeping i see in the mail app the attention mark telling my something is wrong with the mail account.
If i open the connection doctor it say's can't connect to IMAP server. if i check my iOS devices there is nothing wrong, everything is working and i can send/recieve mail. on iOS and OSX the settings are the same with SSL enabled and password type.
When i tried to telnet the mailserver address with the IMAP or SMTP port i get a connection. so, there is no firewall blokking my connection.
But now the strange thing when i quit my mail.app and start it again the mail gets connection again. So is there a problem when changing networks when the Mail.App is stil active?

That's just to bad, will it be solved in a future release of OSX?
I don't know... maybe Apple will force me migrating to Mavaricks.
it seems that although w'r using DNS, the outside ip gets remebered or the connection isn't closed down properly when putting the macbook to sleep.
I can try offcource to configure the outside LANip (Non dns) in my mail client.
I will post with results..

ORA-06502 on "Help Text" region when changing pages on a tabular form

Hello everybody,
We are developing an application on Apex 4.1.0.00.32. This application have some pages with tabular forms and these pages uses a page zero as template. In this page zero, we have added two sidebar regions: a list region to navigate on the application and a help text to describe how to use our application.
The problem occurs when the tabular split the records into pages (since it has more records that it can show on a single page). When the user clicks to change to another page, Apex raises an ORA-06502: PL/SQL: numeric or value error as described below:
Erro ao renderizar a região "Ajuda". ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
Informações Técnicas (visível somente para desenvolvedores)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 2
component.name: Ajuda
error_backtrace:
ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
Obs: Our database is in Brazilian Portuguese, so I guess it will be hard for some people to understand the first two lines! :)
We have tried to change the pagination style of the tabular form and change the region model of the help text but the problem still happens.
Does anyone an ideia about what this may be?
Thanks in advance!

I am getting the exact same message, to the line number, also in APEX 4.1.0.0.32.
Occurs when changing pages in a classic report, Standard region template, select list pagination, when selecting a different pagination set.
In English:
Error during rendering of region "Matched Participants Help & Hints".
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 2
component.name: Matched Participants Help & Hints
error_backtrace:
ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
There are no conditions on the region, and no date string within the Help text. Some HTML tags, that's it.
The Help region renders fine the first time.
The Debug info does not help any:
3.798360.00062Computation point: After Box Body4
0
3.798990.00081Processes - point: AFTER_BOX_BODY4
0
3.799790.00068Region: Matched Participants Help & Hints4
0
3.800470.00213Region rendered dynamically because request was not null4
0
3.802590.00096Add error onto error stack4
0
3.803550.00084...Error data:4
0
3.804400.00084......message: Error during rendering of region "Matched Participants Help & Hints".4
0
3.805240.00084......additional_info: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
0
3.806080.00081......display_location: ON_ERROR_PAGE4
0
3.806890.00081......is_internal_error: true4
0
3.807700.00084......apex_error_code: APEX.REGION.UNHANDLED_ERROR4
0
3.808540.00082......ora_sqlcode: -65024
0
3.809350.00234......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
0
3.811700.00082......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654 ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204 4
0
3.812510.00081......component.type: APEX_APPLICATION_PAGE_REGIONS4
0
3.813310.00110......component.id: 24
0
3.814420.00099......component.name: Matched Participants Help & Hints4
0
3.815400.00076...Show Error on Error Page4
0
3.816160.00344......Performing rollback4
0
3.819610.00225Processes - point: AFTER_ERROR_HEADER4
0
3.821850.00268Processes - point: BEFORE_ERROR_FOOTER4
0
3.82453-End Page Rendering
Any thoughts on where to poke around for this one?
Thanks - Karen

APO-DP - Change in Calculation Type of Key Figure in Production Environment

Hi Team,
I wish to know how to make a change in Calculation Type of Key Figure in Production Environment. I wish to change calculation type from "P" to "S" and also wish to enter Disaggregated Key Figure.
Regards,
Tarun Jha

HI,
The TR will not move the changes as you are expecting here.
Any changes to planning area, below 5.0 need to de-intialize the planning area.
just like
1. hold the latest back up
2. de-intialize planning area
3. make the required changes to planning area
4. initialize planning area and do conisistency checks
5. load back the data to planning area at all CVC level
all the steps need to perfom, in Dev and Quality and Production servers,
Plan the activity for a weekend so that users will not get disturb*
All the best
ARUN R Y

Behaviour of WAD when changing result calculation

Similar Messages

Maybe you are looking for