Behringer UCA 202 USB connector source of static in recording Kaossilator

Recording the Kaossilator into GB was producing intermittent static; things would begin keenly but a few bars into the tune - randomly - the static arrived. After checking myriad items such as power supply and cables I got rid of the Behringer UCA 202 USB interface and returned to a Griffin iMic w/ Y cable.
That seems to have solved the static issue. Yay, Griffin.

Hello Triage, the problem that you had with your intermittent static sounds exactly the same as the problem i'm having with my Art Tube project series preamp. Although I have replaced the USB cable the problem is persisting. I have a posted a thread in the garage band 08 forum title Art Preamp distortion and fuzz. Any advice you could give would be fantastic.
I'm sure you can identify with my frustration.

Similar Messages

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

Has anyone ever experienced the situation where plugging in the USB connector to the charging source (high-power USB port or Apple charger) halfway, then pressing it in firmly, results in the iPad not charging?

It's highly likely that there is a poor connection in the phone - either a pin in the dock connector or internal wiring harness. No software fixes or "tricks" would work, but I would recommend restoring in iTunes, first using a backup and if needed restore as a new phone.
Otherwise, opening and repairing the phone takes some tech knowledge that can't be relayed here. Apple doesn't repair phones other than replacing batteries (not inconceivable that you have a bad battery), but offers "out-of-warranty" replacement (refurb) phones for $149 (US). 3rd party iPhone repair centers may be able to fix it for less. Google to find them,
Tried soft and hard resets
FYI, there's no such thing as "soft" or "hard" resets in iPhone terminology. There is only one phone reset. You'll see those terms thrown around by technically ignorant posters, but they mean different things to different people and are actually archaic, 1980s PC terms that have nothing to do with iPhones.
See the User Guide, Appendix B.

My Behringer FCA 202 is not showing as a device with OS X update - Please advise?!

My Behringer FCA 202 is not showing as a device with OS X update

No.
Try updating the driver for Apple Mobile Device in the Universal Device controller section of the Device Manager.
(Apple Mobile Device will not show if your phone is not connected)
If you want to manually assign it:
Make sure your iPhone is connected to a USB port on the computer.
Launch Desktop and hover your cursor over the bottom-left corner of your screen to reveal the Start screen icon. Right-click on the Start screen icon then click on Device Manager.
Right-click the Apple Mobile Device in the Universal Serial Bus controllers and choose Update Driver Software.
Click Browse my computer for driver software
Click Let me pick from a list of device drivers on my computer
Click the Have Disk button.
Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the usbaapl file. (if 64bit then it may be called usbaapl64)
Click Open in the Have Disk window, then Next and Finish.

IPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??

iPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??

Hi there beee19,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
-Griff W.

Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
Activate AirPrint in Mac OS X;
http://netputing.com/airprintactivator/
Add AirPrint to Windows;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

K7T Turbo D-Bracket USB connector?

Please I need some help.
I have a K7T Turbo Limited Edition Motherboard 6330 V.30 . It came with the P2P USB Bracket and the D-Bracket.
I can only find one place on the motherboard for a USB connector, how am I supposed to install these? Is there a mismarked motherboard pinout?
My Motherboard manual says it has a connectors for 6 USB ports.
I have 2 near the PS2 connectors built in, the D-Bracket has 2, the P2P has 2 which = 6, but I can't find a place to plug the brackets into the motherboard.
I would appreciate any help in the matter at all
Neoghost

Hi
According to the MSI site for the K7T Turbo Limited Edition, your motherboard only supports 4 USB connections.
You can use a USB PCI card to obtain more if needed.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=25

Is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch

is there a driver to let a ps2 keyboard plugged in with a usb connector work on my macbook pro 13inch?
I know there are more threads about this subject but none was really an answer.
I got a keyboard (brand medion) with a ps2 connector. i wanted it to connect to my macbook so i bought an ps2 to usb connecter.
wile connected with my macbook the keyboard leds flash one time like they do when you put it in a ps2. but after this just doesn' t work
I think i might miss a driver or its just turned of somwhere in the system. an previous answer was said something about a safe reboot and a lot of codes but thats to hard for me.
so any good solutions????

I've never found a PS2 to USB adapter that worked, or IIRC I've never found one at all. I have USB TO PS2 but not the other way. Just go out and buy a new keyboard. PS2 is so late 90s/early 2000s

How to connect my Iridium 9555 to a USB connector on the Mac OS 10.7.3?

How to connect my Iridium 9555 to a USB connector on the Mac OS 10.7.3?
i can not create a new network configuration via USB interface on 10.7.3.

Doesn't look like they've updated their driver in a while. October 15 - 2010.
Typically old drivers and 10.7 don't get along so well. Short answer, unless you know how to write a driver, you might be outa luck.
Call their support line and see what they say.
-G

I bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

My iPhone 4S went into lock-up with a screen display image of USB connector pointing to iTunes logo. I took it to a Verizon store and they said I have a brick lock and that only an Apple retail store 50 miles away could clear it

My iPhone 4S went into lockup with a screen displaying an image of the USB connector pointing to the iTunes logo. I was traveling and took the phone to the closest Verizon store. The store informed me that I had a brick lock and that only an Apple retail store could unlock the phone. The Verizon store explained that they have seen this problem with SEVERAL other 4S users who had upgraded to the new iOS7 operating system and that to their knowledge it is too demanding to work on pre-iPhone 5S phones having a far less capable processor. The closest Apple store was 50 miles away in King of Prussia, Pennsylvania. I went to that store three days later (today) to reset the phone before flying out of Philadelphia Intl. Airport. The Apple store personnel were overloaded and not sensitive to my plight. They told me that I would have to make a reservation for a time 2 hours later for tech support. I couldn't do that without missing my flight - out of luck until I get back to Los Angeles. If the Verizon store explanation is true, Apple needs to accommodate 4S and earlier generation users and not force them to upgrade to a $459 iPhone 5S!

villebard wrote:
The Verizon store explained that they have seen this problem with SEVERAL other 4S users who had upgraded to the new iOS7 operating system and that to their knowledge it is too demanding to work on pre-iPhone 5S phones having a far less capable processor. !
The salesperson at Verizon has no clue what their saying.
My 4S and many of my friends works perfectly fine on IOS 7.3, no issue as all.

I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

Just a thought, but maybe consider returning the device. Seems it might be a bit too complicated for you.

How to Output Digital Audio to Male Mini USB Connector?

I would like to input digital audio from my iPhone 5 to my headphone DAC/amplifier. The latter has a mini USB female connector for digital signal input. I envisage the following options, listed in the order of preference:
1. A cable with a male Lightning connector to a male Mini USB connector. This would be the most elegant solution but does such a cable exist?
2. Apple Lighting to female Micro USB adapter plus a male Micro USB to male Mini USB cable. Does this pass audio?
3. Apple Lightning to male USB connector (the cable which came with the phone) plus a female USB to male Mini USB connector. This should work technically because the Apple stock cable does output audio from the phone to my car audio system.
4. Any other ideas?
Which of the above options would be best to send digital audio from my iPhone 5 to my headphone DAC/amplifier? Thank you.

I believe you are not correct. You likely have not read my question entirely because I said that:
"This should work technically because Apple stock cable does output audio from the phone to my car audio system".
In other words, I connect my iPhone 5 using the supplied Lightning charging cable to the USB input of the car audio system and the music plays just fine.
However, I need a cable that has a Mini USB male connector, not a regular USB connector. Is there such a thing, or should I go with Options 2 or 3?
Thanks.

My iPod is stuck on the USB connector towards the iTunes snd on cd, and I updated it and now it's saying my iPod has apasscode when it's still stuck on that USB screen... What do I do????

My iPod is stuck on the USB connector towards the iTunes snd on cd, and I updated it and now it's saying my iPod has apasscode when it's still stuck on that USB screen... What do I do????

you can do is go to ijailbreak.com then select downloads section.......scroll down and see the latest version of ipod touch second generation is available for download.....when it gets downloaded connect your iPod to itunes or keep it connected then hold option and click restore (mac) search the software by writing in search "iPod" a thing with white cube will show up if it is the file you just downloaded click it and wait for itunes to do its work......you can ask more if you are on windows

I need to restore my Ipad however I can't find the USB connector. Is there one with the pack?

I need to restore my Ipad however I can't find the USB connector. Is there one with the pack?

Pull the USB plug out from the charging adapter.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Behringer UCA 202 USB connector source of static in recording Kaossilator

Similar Messages

Maybe you are looking for