Behringer UCG102 Guitar Link stop working after upgrade to Lion

Hi,
I  have a Behringer UCG102 Guitar Link that worked in the past (using Mac OS X Snow Leopard without any special driver, before upgrading to Mac OS X Lion) without any problem but now has stopped working. The device is working properly on Windows computers. Also I recently bougth a Behringer Xenyx  2442USB mixer and tested on a windows computer and it works perfectly. So I think it is not a problem with my mixer hardware neither my guitar link unit.
But when I try to use it any of them on my Apple MacBook Pro running Mac OS X Lion (10.7.3) they do not work. I can reproduce sounds coming from my computer to the mixer, but I'm not able to record nothing. I've followed the indications. In the Audio/Midi settings application I select USB Audio Codec as default Input and output device. I did the same on the "System Preferences -> Sounds".
Also in any recording application tested (Audacity, GarageBand, EnergyXT2.5) I selected again as input source the one labeled as "USB Audio Codec", but no sound is recorded.
I've noticed that in "System Preferences -> Sounds" in the input section, when I select "USB Audio CODEC" as device for sound input, it is not possible to change the settings for that device (it shows "The selected device has no input controls" and the Input level bar is completely at left. If I select the integrated microphone I'm able to select the input level and the bar shows the sounds the microphone record.
Something similar happens with the Audio MIDI Setup application where in the input section of the USB Audio CODEC all the level controls (Master, 1, 2) are disabled and grayed
It is clearly a problem in the driver in the latest version of the operating systems, and it seems this bug have been already reported by many people. Does Apple have any plan to solve that issue?

If you can put a step by step tutorial with pictures I would greatly appreciate, because i could not make the UCG 102 work and I used it a lot on my other computer with windows to use Impulses to simulate cabs, so if you can do it I would love it !!! Sorry for my bad english

Similar Messages

  • Time machine stopped working after upgrading to lion

    After upgrading to lion my time machine has not been able to back up. It takes a long time preparing and trying to back up and then stops with an error (without an error message being shown to the user). The status is delayed and it claims that the backup disk cannot be found (Im using a time capsule).
    The system log contains the following entries (filtering on "time"):
    Aug 18 21:58:48: --- last message repeated 2 times ---
    Aug 18 22:00:06 Macintosh-2 mtmd[2132]: Set snapshot time:1313697608 (current time:1313697606)
    Aug 18 22:01:27 Macintosh-2 com.apple.backupd[3318]: Network destination already mounted at: /Volumes/Soren Helsted's Time Capsul
    Aug 18 22:02:10 Macintosh-2 fseventsd[17]: event logs in /Volumes/Time Machine Backups/.fseventsd out of sync with volume.  destroying old logs. (280 2 3619)
    Aug 18 22:02:11 Macintosh-2 fseventsd[17]: log dir: /Volumes/Time Machine Backups/.fseventsd getting new uuid: 06F2B428-D8B5-46F7-9505-DCF33818C3FC
    Aug 18 22:02:11 Macintosh-2 com.apple.backupd[3318]: Disk image /Volumes/Soren Helsted's Time Capsul/Soren Helsted’s Computer.sparsebundle mounted at: /Volumes/Time Machine Backups
    Aug 18 22:02:12 Macintosh-2 com.apple.backupd[3318]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Aug 18 22:05:39: --- last message repeated 81 times ---
    Aug 18 22:05:39: --- last message repeated 14 times ---
    Aug 18 22:05:39 Macintosh-2 mds[68]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C)(E rror) IndexGeneral in fd_pread:pread(120 /Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C/1. indexPostings, o:0, s:262144) err:5
    Aug 18 22:05:41: --- last message repeated 1427 times ---
    Aug 18 22:05:41 Macintosh-2 mds[68]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C)(E rror) IndexCI in ci_ftruncate:ftruncate(86 /Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C/tm p.merge.0.indexIds, 0) error:5
    Aug 18 22:05:42: --- last message repeated 737 times ---
    Aug 18 22:05:42: --- last message repeated 43 times ---
    Aug 18 22:05:42 Macintosh-2 fseventsd[17]: disk logger: failed to open output file /Volumes/Time Machine Backups/.fseventsd/00000000032488f5 (Input/output error). mount point /Volumes/Time Machine Backups/.fseventsd
    Aug 18 22:05:42: --- last message repeated 1 time ---
    Aug 18 22:05:42: --- last message repeated 11 times ---
    Aug 18 22:05:42 Macintosh-2 mds[68]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C)(E rror) IndexCI in open_index_file:open file error: 5, tmp.merge.1.indexHead
    Aug 18 22:05:42: --- last message repeated 32 times ---
    Aug 18 22:05:42: --- last message repeated 1 time ---
    Aug 18 22:05:42: --- last message repeated 1 time ---
    Aug 18 22:06:07: --- last message repeated 61 times ---
    A

    I finally figured out what was the problem. The disk utility tool found an error in the backup disk and fixed it. I guess some error occurred while the upgrade to Lion was on the way.

  • Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
    I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

  • My Microsoft Office 2004 stopped working after upgrading to MT.  How can I get it to work, or, how can I uninstall MT?

    My Microsoft Office 2004 stopped working after upgrading to Mountain Lion.  How can I get it to work again, or, how can I uninstall MT?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • Why does my cable selfie stick stop working after upgrading to iOS8.2?!

    I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
    My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
    How do I solve this?

    Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
    Double click on paintbrush, and enable keep selected.
    If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Back to my mac no longer works after upgrading to Lion

    Back to my Mac no longer works after upgrading to Lion
    After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
    Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

    OK, so further investigation has addressed the BTMM issue on a remote machine.
    With all machines running lion, I was having issues trying to log in to a standard user headless machine already running.  In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login.  Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions.  This means you can admin the remote computer without bothering the remote user.
    The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login.  I applied a similar solution to a problem that was related to screen sharing I found on this board.  What I believe to be the fix is to add the standard user to the screen sharing user list.  Then screen share to the remote account using the standard user credentials. 
    So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access.  Previously I only had admins.  This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
    Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

  • GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

    GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
    A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
    Back to GCC printer. Just cannot get it to work.
    But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
    See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
    GCC tech have this work around. Here is what I received from GCC via email.
    +At 01/02/2010 12:21 AM we wrote -+
    +Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
    +You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
    +You can add the printer over IP, that should work fine. Here are some steps for you to take.+
    +1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
    +2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
    +3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
    +4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
    +5) Next to 'Protocol' select LPD Line Printer Daemon.+
    +6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
    +7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
    +8) (Optionally) Next to 'Print Using' change/verify the PPD.+
    +9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
    +10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
    +11) Done. You should be ready to print.+
    Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
    TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
    When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
    gibberish. There is nothing to unstuff and install.
    All worked well with OS 10.5.
    Thanks for shedding any light.
    John L.
    Thanks,
    John

    Hello John,
    At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
    So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
    Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
    For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
    Hope this helps. Please reply if you require more help.
    Pahu

  • Csv output stop working after upgrade

    We just did a apex 3.2 to 4.0 upgrade, then all csv output links stop working. How can I fix the problem?
    Any suggestions are greatly appreciated.
    A sample link is shown in following, which give page not found error
    http://c2apex:7777/pls/apex/f?p=104:7:2297989702429998:FLOW_EXCEL_OUTPUT_R4326133634540053_en-us

    Yes! I'd install the software pack of the mouse for Mac OS X that adds a control panel at Sistem Preferences and I take control - and the wheel came back!
    But it's not easy finding it in Microsoft.com (in my case: .br). You got to start by hardware products and follow support links, system, etc..
    Thank you for the tip!

  • Keyboard shortcut command-w stopped working after upgrading to OSX 10.9.4

    Dear all,
    after upgrading to OSX 10.9.4 the keyboard shortcut command-w stops working after about 30 min of having the machine powered on. Interestingly, this phenomenon is not restricted to a certain app (Safari, etc.).
    In system preferences > keyboard all settings have been set to "default".
    Anybody else having the same issue?
    Many thanks,
    wolfgang

    Hi folks,
    just as quick documentation for possibly other error sources for the problem "shortcut command-w not working":
    If problem persists close all applications (allL!). Then open one app like Safari, open several tabs and check whether command-w works.
    Reason: it could happen that you've set command-w inadvertently in another app like Snagit. And when setting this the app did not tell you "listen dummy, this is a standard command, do you really want to replace a standard command with a app-specific command. Don't be surprised if it doesn't work when the app is running."
    This is what happened to me. So close all apps and check whether problem persists.
    reg,
    wolfgang

  • Wifi stopped working after upgrade, Asus N13

    Hi,
    A couple of days ago my wireless stopped working after I ran a full upgrade.  I have tried to identify the problem to no avail.  I attempted to use the Ralink drivers for my chipset rt3072 but those worked very poorly compared to the rt2800usb driver in the kernel and it kept freezing my system.
    My relevant lsusb entry:
    Bus 010 Device 005: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter (rev. A1) [Ralink RT3072]
    Output of lsmod | grep rt2
    rt2800usb 17360 0
    rt2x00usb 9026 1 rt2800usb
    rt2800lib 49258 1 rt2800usb
    rt2x00lib 35947 3 rt2x00usb,rt2800lib,rt2800usb
    mac80211 463233 3 rt2x00lib,rt2x00usb,rt2800lib
    cfg80211 430289 2 mac80211,rt2x00lib
    crc_ccitt 1363 1 rt2800lib
    usbcore 173007 11 uhci_hcd,snd_usb_audio,rt2x00usb,rt2800usb,snd_usbmidi_lib,ehci_hcd,ehci_pci,gspca_main,usbhid,gspca_zc3xx,xhci_hcd
    Output of dmesg | grep rt2
    [ 9.835141] usbcore: registered new interface driver rt2800usb
    Output of dmesg | tail after trying to connect:
    [ 3547.374615] wlan0: authenticate with 20:aa:4b:02:de:1b
    [ 3547.443545] wlan0: direct probe to 20:aa:4b:02:de:1b (try 1/3)
    [ 3547.643999] wlan0: direct probe to 20:aa:4b:02:de:1b (try 2/3)
    [ 3547.847118] wlan0: direct probe to 20:aa:4b:02:de:1b (try 3/3)
    [ 3548.050252] wlan0: authentication with 20:aa:4b:02:de:1b timed out
    [ 3554.041445] wlan0: authenticate with 20:aa:4b:02:de:1b
    [ 3554.110531] wlan0: direct probe to 20:aa:4b:02:de:1b (try 1/3)
    [ 3554.310824] wlan0: direct probe to 20:aa:4b:02:de:1b (try 2/3)
    [ 3554.513940] wlan0: direct probe to 20:aa:4b:02:de:1b (try 3/3)
    [ 3554.717073] wlan0: authentication with 20:aa:4b:02:de:1b timed out
    I am using wicd but I have also tried with NetworkManager (I have made sure to systemctl disable the one not under test).
    I tried using wireshark in monitor mode on another computer to capture the exchange for authentication.  I can see my computer request authentication and I can see the router reply back.  The reply is an authentication successful message, but then my computer immediately tries to authenticate again.
    Any help would be appreciated.

    glittercutter wrote:
    Hi,
    I have the same device and a similar issue.
    Connection works but pinging the router shows extremely high ping (over 3000ms) and high packet loss, especially when the network is under load.
    The connection drop randomly and wont reconnect until I manualy unplug and replug the usb device.
    Downgrading the kernel fixed the problem.
    Which kernel version did you downgrade to?
    I also have the same device at home and I might face the same problem when I go back home next month.
    Last edited by ico (2013-04-27 18:30:07)

Maybe you are looking for

  • HT1727 how many ipods can I connect to one computer?

    I have 2 ipods, can I synch both of them with the itunes library on one computer?

  • Need some help with a program Please.

    Well, im new here, im new to java, so i need your help, i have to make a connect four program, my brother "Kind of" helped me and did a program for me, but the problem is i cant use some of those commands in the program and i have to replace them wit

  • G/L picking during account assignment P & Q

    Hi Experts, Please help me to clear one doubt: With Q system is picking G/L account as per OBYC settings corresponding to valuation class of material irrespective of what G/L I enter manually here, a default G/L is picked and its understood. But with

  • COOIS- Report  Grid Value not displaying

    Hi Experts,                In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category

  • BAPI for creating recipe

    We are trying to develop an interface with a third party software and we need to upload recipe from there. So i am need a BAPI to create recipe and maintain aswell. also I am trying to use BAPI BAPI_MATERIAL_SAVEDATA to create material and BAPI BAPI_