Bejeweled HD for iPad, Bejeweled for iPhone - don't work with IOS 8 ?!?

Hi,
Some friends and I all experience the same problem:
After updating our iPads and iPhones to IOS 8 Bejeweled HD (for iPad) and Bejeweled for iPhone don't work any more.
The screen remains black but you can hear the game's background music.
I searched the internet and also the game developer's (Electronic Arts, PopCap) site - nothing
Can somebody tell whether there's an update for these apps in the pipeline.
Normally I would suppose that developers test their applications on new platforms what maybe here was not the case. And there was no warning whatsoever that these apps, we payed for, would not work on IOS 8.
Thank you in advance for a short reply
Kind regards,
Anette (Germany)

Hi Anette ...
The app runs on iOS 5.1.1 or later as noted here > https://itunes.apple.com/us/app/bejeweled-hd/id517260318?mt=8
But does not necessarily mean the developer updated the app for iOS 8 compatibility.
Click Bejeweled HD Support at that link.

Similar Messages

Speakerphone from iPhone don't work with FaceTime

Speakerphone from my iPhone don't work with Facetime.
Its a new iPhone 4S.

Hi Anette ...
The app runs on iOS 5.1.1 or later as noted here > https://itunes.apple.com/us/app/bejeweled-hd/id517260318?mt=8
But does not necessarily mean the developer updated the app for iOS 8 compatibility.
Click Bejeweled HD Support at that link.

IPhone 4 stop working with ios 6.1

iPhone 4 stopped working with ios 6.1, visited apple first time, restored phone and worked, less than 24 hours later stopped working again, back to the store, I told iPhone is out of warranty and they'll replace for $150. iPhone worked fine with previous version, no problem at all. Asked to restore to the previous software version, told can't be done. Why should I pay for a damage caused by a software update. Tec claims that ios 6.1 will not work with my phone because it discovered some hardware malfunction, possible the home button. They can't repair. suggested to go to a third party. I'm a satisfied Apple product user for many years. What happened? Any welp out there?

Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
Anyways after about 18h of search and stress I came across this link:
http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
Well hope that will work for you like it did for me

Shortcuts for messages don't work after iOS upgrade

After having upgraded to the most recent iOS, my shortcuts don't work in messages and mails anymore. Has anyone else had the same experience?

Well, it's telling you that the datset doesn't exist. From the help in 4.7:
OPEN DATASET
Addition 1a
... FOR INPUT
Effect
OPEN ... FOR INPUT opens the file in read mode.
If the file does not exist, OPEN ... FOR INPUT fails with Return Code SY-SUBRC = 8.
Note
If OPEN DATASET is not executed in a Unicode program and if the user has write authorization for the file, the file is opened in read and write mode. Otherwise, it is only opened in read mode.
Rob

Is it me or old apps don't work with IOS 5.0 ?

I everyone
In an attempt to install IOS 5 , iI realized tha none of the apps could start, only native apps like itunes and mail could work.
I had to return to IOS 4.3 to use apps I open everyday.
Do we need to wait for developpers to update their apps to current IOS 5.0?
Thanks
D

@ Meg
Thanks for the Tip I'll try that out. I just hope that my most used app will work on IOS 5 , although I didn't see the latest update on Itune .
@Allan
For stability reason, I didn't hack or jailbreak the the phone. I managed to go back to the previous IOS setting the phone in "safemode" and installed IOS 4, that was it.
I'll post back once installed
Thanks
D

The condition for action don't work with user status

Hello,
we have some problem with define conditions for actions of SLA Monitoring:
Schedule condition with system status (Example:"&CRM Service Product Item.System Status& = I1002") is implemented.
But schedule condition with user status ("&CRM Service Product Item.User Status& = E0005ZLFC0001") is not implemented i.e. the action for message with user status = "E0005ZLFC0001" is not executed.
Please help us.
Best regards,
Alexander.

Hi Anette ...
The app runs on iOS 5.1.1 or later as noted here > https://itunes.apple.com/us/app/bejeweled-hd/id517260318?mt=8
But does not necessarily mean the developer updated the app for iOS 8 compatibility.
Click Bejeweled HD Support at that link.

Autofill for email no longer works with ios 6

iphone 4s does not autofill email addresses after iphone ios 6 update

Try this.
Go to Settings>General>Date and Time>Set Automatically>Off.
Set the date one year ahead. Try to get email.
If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

Iphone 4 not working with iOS 6, Iphone 4 not working with iOS 6

iOS 6 is not working on my iPhone 4. When the update/restore finishes it gives me the (-1) error and cannot finish the update. Please help.

Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
Anyways after about 18h of search and stress I came across this link:
http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
Well hope that will work for you like it did for me

IPad 2 hdmi connector no longer works with iOS 7.3

Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror. Running ios 5 the mirroring worked perfectly for sound and video. Don't remember if I tried while running 5.1. Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV. When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected. I have sound and video working fine except for the colors. The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync. I have changed the hdmi to a new one, but it didn't help. I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV. Leads me to believe it's an issue with the TV OUT function of the ipad. I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

What i have to do if the earphones don't work with IOS 6?

In my ipodtouch(4th) when i changed my ios 5.1.1 to the new ios 6
The earphones and the speaker's channel right dosen't work What i have to do ?

Assuming the headphones work in another device/other earphone do not work in your device.
-Try cleaning out/blowing out the headphone jack Insert/remove the headphone plug a dozen times or so
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT4108 for what my adapater 1422 don't work with my iphone 4s

for what my adapater 1422 don't work with my iphone 4s

pardon pour mon anglais!
Mon adapater AV HDMI 1422, ne fonctionne pas sur mon iphone 4s, l'iphone dit que " cet accessoire n'est pas reconnu" alors que ça fonctionne bien sur mon IPAD 2.
Pouvez vous m'aider ?
Merci

With iOS 7.0.4 Notes on iPhone don't sync with Notes on iPad

I upgraded both iPhone 4 and iPad 2 to iOS 7.0.4.
With iOS7 my Notes on iPhone don't sync with my Notes on iPad.
In both devices I have set iCloud ON for Notes.
In the Notes App I selected the iCloud Account.
But when I write a new Note on iPhone 4 it doesn't appear on iPad 2 and viceversa.
How can I fix this bug?
Thanks a lot!

You're welcome
alfiero wrote:
then I went on iCloud.com with my iPad, but I wasn't able to see the Note.
You can't go to icloud.com using Safari on your iPad, you have to go there using your computer. If you didn't do so, try going to icloud.com and check your notes using your computer browser.

My iPhone no longer works with my wi-fi network. It detects the network but can't communicate, even though it did so until today for months.

My iPhone no longer works with my wi-fi network. It detects the network but is unable to communicate, even though until today it worked great for months. The network is Verizon FiOS Internet on an M1424WR router. PCs and iPad continue to work with the same network without any problem. Any ideas?

have you upgraded to the new ios5 software? if so that could be the issue and contact apple.

Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

don't know. what have you done to troubleshoot?

Jabber for iPhone 9.6 Integration with OpenLDAP

     Hi everyone! i just found an issue when try to integrated jabber for iphone version 9.6 with OpenLDAP that seem like not working and want to describe my environment as below.
Using BE6K 9.1 includes,
     - CUCM 9.1.2
     - IM&Presense 9.1
     - Jabber for Window 9.6 integrate with OpenLDAP using EDI on jabber-config.xml is working properly.
     - Jabber for iPhone 9.6 integrate with OpenLDAP using BDI on jabber-config.xml not working(cannot lookup)
     - Jabber Voice for iPhone and Android can integrate with OpenLDAP which configure in phone configuration
     - Both of Jabber can't access the photo in OpenLDAP with "jpegPhoto" attribute.
By the way im also included jabber-config.xml files for further troubleshooting. Another question, is it possible to include EDI and BDI for working together in one jabber-config.xml file
One another file is jabber for iphone log when im trying to search "anu" word in searching box
-- 2557-02-02 20:48:06.045 DEBUG [3d8d018c] - sidebar search, string is : a   <------ started from this line in my log file for easier troubleshooting.
If you need more log or any files for troubleshoot just tell me. Thanks for reading!.
<Jabber-config.xml>
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>OpenLDAP</BDILDAPServerType>
<BDIPrimaryServerName>10.0.1.11</BDIPrimaryServerName>
<BDIServerPort1>389</BDIServerPort1>
<BDIConnectionUsername>cn=xxx,dc=xxxx,dc=xx,dc=xx</BDIConnectionUsername>
<BDIConnectionPassword>xxxxxxxBDIConnectionPassword>
<BDIUseJabberCredentials>false</BDIUseJabberCredentials>
<BDIEnableTLS>false</BDIEnableTLS>
<BDIPredictiveSearchFilter>uid</BDIPredictiveSearchFilter>
<BDIUserAccountName>uid</BDIUserAccountName>
<BDIBaseFilter>(&(objectClass=inetOrgPerson)</BDIBaseFilter>
<BDISearchBase1>ou=users, dc=xxxx,dc=xx,dc=xx</BDISearchBase1>
<BDIUseANR>false</BDIUseANR>
<ConnectionType>1</ConnectionType>
<PrimaryServerName>10.0.1.11</PrimaryServerName>
<UseWindowsCredentials>0</UseWindowsCredentials>
<UseSecureConnection>0</UseSecureConnection>
<SearchBase1>ou=users, dc=xxx,dc=xx,dc=xx</SearchBase1>
<UserAccountName>uid</UserAccountName>
<BaseFilter>(&(objectClass=inetOrgPerson)</BaseFilter>
<PredictiveSearchFilter>uid</PredictiveSearchFilter>
<ConnectionUsername>cn=xxxx,dc=xxx,dc=xx,dc=xx</ConnectionUsername>
<ConnectionPassword>xxxxxx</ConnectionPassword>
<PhotoSource>jpegPhoto</PhotoSource>
</Directory>
</config>

Hi noom_ekkalak ,
Thanks for your answer!
I have specific LDAP parameter in TCT phone configuration as you say, then try to connect the "Directory" setting in Jabber Voice, but it didn't work . i just get the error “Unable to verify account” all the time. :(
Besides this ,is there anything i need to specific? How did you specific Jabber Voice "Directory" parameter?
Thank you!

Bejeweled HD for iPad, Bejeweled for iPhone - don't work with IOS 8 ?!?

Similar Messages

Maybe you are looking for