Belden Bluetooth Numeric Keypad and FCP X

Hello all.
Just a question about FXP X and multiple Bluetooth keyboards
Belden has lauced a Bluetooth numeric keypad.
http://store.apple.com/uk/product/HD389ZM/A/belkin-wireless-yourtype-numeric-key pad-for-imac-and-macbook
Used in conjunction with the Apple Bluetooth keyboard it makes a wireless replacement for the big wired Apple keyboard.
My question is this.
How does FCP X deal with multiple Keyboard devices with regards to mapping FCP X commands to buttons inside the Command editor?
Has anyone tried this ?
Can you map to the keyboard and not the keypad,,,, or is it like.. suddenly you have a large wireless keyboard only split in two ?
Regards Nils M Alexandersen

Hello:
Before you return it, try a couple of things:
1. Reset the SMC.
2. Reset the PRAM.
If that does not help, take it back for replacement.
Barry

Similar Messages

Just purchased a WKP-1314 bluetooth numeric keypad and not working

Just purchased a Apple WKP-1314 for my new IMAC,
Followed the instructions and it paired right up and then lost connection, then connected and then lost connection.
Trying to find out if some else has had this problem with the unit before I make the 35 minute ride back to the store.
Searched this site for it found nothing hoping others are using it or tried to get some inout thank you.

Hello:
Before you return it, try a couple of things:
1. Reset the SMC.
2. Reset the PRAM.
If that does not help, take it back for replacement.
Barry

My new MP doesn't see LMP bluetooth numeric keypad

I just got my new Mac Pro and I'm quite excited with it... But I can't make my LMP Bluetooth numeric keypad working...
The bluetooth keyboard and trackpad matched regularly, but MP doesn't see the LMP. I tried in all ways but... none...
Any help please?
Thanks

Hello mnstudio,
The following article provides some useful steps that can help get your numeric keyboard paired with your Mac Pro.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048
Cheers,
Allen

Numeric keypad quit working and does not connect to the bluetooth

my wireless bluetooth numeric keypad is not connecting

Hello Gneel01,
I found an article with steps you can take when you have issues with a Bluetooth device not connecting. I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

Numeric keypad emulator for MacBook Pro?

I've noticed that the state of the Fn key can be read in software, rather than just being a hardware-level modifier key. How do I know this? There's the Keyboard Viewer and StickyKeys, which both treat Fn just like other modifier keys.
Anyways, you know how the new MacBook Pros don't have the embedded numeric keypad? Well what I'm wondering is if there's some software to bring this back. You know, it can intercept keyboard messages and, if a key that would normally be part of the embedded keypad is pressed, check whether or not Fn is held down. If not, it will type the normal character. If so, it will type the number. Certain programs require the numeric keypad, or are at least much more usable with it (Blender, anyone?) and it would be really nice to have something like this. Thanks!

You can install the KeyRemap4MacBook PrefPane:
http://www.pqrs.org/tekezo/macosx/keyremap4macbook/
...and remap the fn-key to fn-key-with-numlock, where fn-key-with-numlock enables the "missing" embedded numeric keypad on the newer MBPs.
@Tuttle - how does that help the OP? There are USB and Bluetooth numeric keypads everywhere (I've even seen them in gas station convenience stores!). There's even 'an app for that', if you have an iPhone/iPod Touch. But, the OP is asking about the embedded numeric keypad which is present on older MBPs (like mine) but was dropped with the Early 2008 models.

Does apple have a wireless keyboard with numeric keypad

Does any one know if apple has a wireless keyboard with a numeric keypad if not they should make one

Hello:
Apple stopped making wireless keyboards with numeric pads some time ago. If you want an Apple KB with a numeric pad, you need to get a USB one:
http://store.apple.com/us/product/MB110LL/B?n=keyboards&fnode=MTY1NDA1Mg&s=topSe llers
if not they should make one
That is a matter of opinion. I never use (or want to use) a numeric keypad and LIKE the smaller Bluetooth KB footprint.
Barry

Numeric keypad locked on

I have a problem like this with my Powerbook G4 17 - it's a system which was upgraded from a Pismo to a Powerbook G4 17, with software strarting from 10.0 and upgraded through Leopard.
The problem is the first Powerbooks supported the embedded numeric keypad, and now that there is no more support for the numeric keypad, but my Powerbook G4 doesn't know that.
The keyboard acts like the numeric keypad is engaged, and I don't know how to turn it off.
When I first got my MacBook Pro 17 (early 2008) and transferred software with the Apple migration tool (via firewire) I had this symptom but the guy at the Genius Bar at the Apple Store went in to Preferences and disabled something in the Universal Access Control Panel, but I don't remember what.
Now that my Powerbook G4 17 is experiencing the same symptom, I don't know what to turn off.
Note that this doesn't happen when I Screen Share or VNC into the Powerbook.

Sorry for the long delay.
Actually, I did - duhh - finally actually take a look at my Powerbook G4 and found that it did indeed support the embedded numeric keyboard, and I could turn it off the proper key.
Thanks for taking the time to reply.
-- Verne

Numeric keypad on T430?

Hi, I recently got a new Thinkpad T430 from my employer and I am quite happy with it.
There is however one minor drawback. The numeric keys, normally accessible with the Fn key, have gone. I guess this makes sense for most users, but I actually use it quite a lot to get the é character. Just press both the Fn and Ctrl buttons, type 130 on the numerical keypad and there it is.
Is there a way to get this back? I don't want to keep my keyboard on US, and having to go to the character map every time is a pain!
Any help is much appreciated!

Hi, cdeloos
In my opinion, the simplest solution would be to purchase an external USB Number Pad. This will cost a little bit of money, but I don't think there is any other way to get the Alt codes without a Number Pad, save for using the character map, which can be very tedious. Having to carry the keypad with you as well as the machine when you're on the go may cause a bit of hassle, but you should be able to do the Alt codes again.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

The Zombie Numeric Keypad

I have removed the batteries from my Bluetooth numeric keypad. When I check the Bluetooth window in Systems Preferences, it still shows the keypad as being connected (see snapshot below). How could this possibly be?
Cheers
John

By numeric keypad, I assume that you're referring to the phone dialing pad. If so, no you cannot input text using the numeric keypad.

G550's numeric keypad does not work as it should be

Goodnight everyone, recently bought a laptop lenovo G550. He has a numeric keypad and one thing is making me confused. The key should be a dot "." is actually a comma ","..... what should I do? I tried everything ... My current setup is Portuguese Brazil ABNT 2
Please Help-me
Stevan Cseke
Brazil
Note from Moderator: Private information removed for your protection.

try this : http://windows.microsoft.com/en-US/windows-vista/Change-your-keyboard-layout

Apple Bluetooth Keyboard: Numeric keypad keys not working

Hi I have a G5 PPC and the 4, 5, 6, and + (all in a row) keys on the numeric keypad stopped working. Replaced batteries and re-paired the Bluetooth—no joy. Tried cleaning under these keys with a blast of air and it didn't help either.
Any ideas? Appreciate any advice. Thanks
Message was edited by: persist

I don't think there's any way to take the board apart, my suspicion is that whatever mechanism causes them to register is warped or damaged in some way. I would think that repairing the board would not be cost effective, a new one would seem to be the way to go. Sorry that there's not a clearer answer.

Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode?

Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode? Grab a drink and let me tell you my story.
I purchased two computers... an iMac 27" i7 3.4 16GB RAM and a Mac mini 2.3 i5 8 GB RAM. Both have Thunderbolt capability and are in fact connected by thunderbolt. I have 3 problems...
1. My Mac mini WILL NOT recognize any bluetooth keyboard. Let me back up for clarification. I set my iMac up first. No problems there. I then went on to set up my mac mini. A couple of interesting things happened concering bluetooth activity. First thing is that the keypad, which was already paired with my iMac wouldn't be recognized by the mac mini, and yet my bluetooth mouse which was paired with my iMac became paired with my mac mini and thus wouldn't be recognized by my iMac anymore. I had to go to my back room and dig out my other bluetooth mouse so that my iMac would at least recognize my second mouse. So now I have two "mice"presently. One for the mac mini, the other for the iMac. Thankfully I also had a USB keypad for my mac mini. My bluetooth keypad is still paired with my iMac but won't pair with my mac mini, which brings me to another question....
2. CAN 1 KEYPAD AND 1 MOUSE PAIR WITH TWO DIFFERENT COMPUTERS SO THAT WHEN I GO INTO TARGET MODE VIA THUNDERBOLT I CAN USE THE SAME KEYPAD AND MOUSE FOR BOTH COMPUTERS? Anybody have some thoughts on that problem?
3. WHY IN THE WORLD IS MY MOUSE CURSOR DISAPPEARING EVERYTIME I EXIT TARGET MODE VIA PASSWORD AND COMMAND F2. I'm using target mode to access my mac mini. But when I exit target mode to get back into my iMac I'm looking at my iMac screen but I can't see the mouse pointer! I can move the pointer around even though I can't see it. Wierd. And this has apparently been going on for some time with other users for over a year. I am presently completely up to date on Lion updates. Both systems are running 10.7.4. Does anyone have a solution or heard a rumor of a solution coming soon regarding the invisible mouse cursor "curse". I hate having to restart my iMac everytime I exit out of target mode just so I can get my mouse cursor visible again.
Food for thought.... Wouldn't it be really cool to have a target mode capability to see your other computers desktops in seperate window screens on your main display. You then could go back and forth from each window by just double clicking or by certain key commands. You could drag and drop from desktop to desktop. Tell me this is coming soon.
Thanks

There was a duplicate post of this question answered at:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HExpertOnly=&HFORCEKWTID=8448:5&HOID=50650000000800000065190000&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_S=0

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

HT1414 my ipad is showing a disabled message and a numeric keypad. Help!

My Ipad two is displaying a disabled message and a numeric keypad. I dont recall a numeric code for it. Can someone help me get it working properly again?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Using Enter key from numeric keypad to enter and switch to next element in an array control

Hello all,
I have a question regarding a simple but annoying problem, of which I did not found a solution yet.
I have written an application in which I have to enter data manually in a numeric array control.
If I want to enter the value and go to the next element in the array control, i am forced to use the Tab key on my keyboard, or risk RSI using the mouse.
How can I assign the Enter key of the numeric keypad section of my keyboard to to the same as the Tab key?
Kind regards,
Raymond

[email protected] wrote:
Can you convert the example in a image or can you convert in to 8.2.1 version?.
Best regards
Saved in 8.2.1 for you.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Change Array Event.vi ‏16 KB

Belden Bluetooth Numeric Keypad and FCP X

Similar Messages

Maybe you are looking for