Belkin HDMI Switch - Apple TV doesn't work?!!

Hi all,
I have just bought myself a Belkin HDMI 3 port switch
http://store.apple.com/uk/product/TM026B/A
I've plugged it all in and my PS3 works through it, I plugged my PowerBook into it (using DVI-HDMI cable) and they work great and yet plugging my ATV into doesn't work. I've tried unplugging the ATV and Switch and then turning them back on again but still no luck.
I don't suppose anyone has any advice?

It seems that Apple TV doesn't support many HDMI switches!
Just in case anyone else comes across this problem then it would seem that the only switch to buy is the OPPO HM-31.
See this thread for further info:
http://discussions.apple.com/thread.jspa?threadID=1251451

Similar Messages

  • Apple TV doesn't work with HDMI Switch

    Apple TV doesn't seem to work with my HDMI Switch. Tried every combination of cables. Tried switching all devices on and off at different times. Googled to see if anyone else has tried a switcher with Apple TV. All I know is: PlayStation 3 works just fine running through the switcher. Apple TV doesn't work at all with the switcher, only when plugged directly into the TV.
    I only have one HDMI port on my Samsung HDTV and two HDMI devices (PlayStation 3, Apple TV). All my component slots are full and I already have a component switcher that's full, too. So HDMI is the only option for me.
    Any ideas? Switcher claims to support HDCP... and it does do HD resolutions (PS3 displaying in 720p).

    I use this 5x1 switch from Monoprice and it works fine, switching 3 devices, which are then routed through my AV receiver's switch... Despite the convoluted hookup, I have not had HDCP handshake issues.
    http://www.monoprice.com/products/product.asp?cid=101&cp_id=10110&cs_id=1011002&pid=2777&seq=1&format=2&style=
    The nice thing about this switch is:
    1. It works: no discernable loss in quality, switches relatively quickly, etc.
    2. It's cheaper than many others, like Gefen, or even the Xtrememac (which is 4x1)
    3. The remote has discrete buttons for each input, which is very helpful when setting up a universal remote like my Harmony 880. I can't tell from the Xtrememac picture if it's a direct input, or if you can only cycle through the inputs...
    Good luck!
    MacBook   Mac OS X (10.4.9)  

  • Restarting my Apple TV doesn't work.

    Restarting my Apple TV doesn't work.  Restoring my Apple TV doesn't work. I ordered the micro-USB cable from the Apple store since that's what the Apple instructions state is required to hook my Apple TV to my Power Mac. Guess what? The Belkin micro-USB 3.0 cable that just arrived after a week's wait does not fit any of the openings on the back of my Apple TV. Now I'm out $32 and still can't update my Apple TV.  Now what I supposed to do?
    Brad

    Hello mel smothers,
    The AirPlay controls are now located in the Control Center.
    iOS: How to use AirPlay Mirroring
    http://support.apple.com/kb/HT5209
    Cheers,
    Allen

  • I can't sign into iCloud because my Apple ID doesn't work there.  For some reason it gave me a .mac email and I don't remember the password.  When it gives me the option to reset my password, it's my Apple ID password which I don't want to do.

    I can't sign into iCloud because my Apple ID doesn't work there.  For some reason it gave me a .mac email and I don't remember the password.  When it gives me the option to reset my password, it's my Apple ID password which I don't want to do.  I have ended up chaning my Apple ID 3 times lately and I still can't get to my cloud management.  What do I do?

    Check if your Data and Time, and Time Zone are set to automatically: OS X Yosemite: Set the date and time on your Mac
    Is this issue also appearing on new user account:
    Isolating an issue by using another user account - Apple Support
    Mac OS X: How to troubleshoot a software issue - Apple Support
    Is this issue also appearing in safe mode: OS X: What is Safe Boot, Safe Mode? - Apple Support

  • HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password.  One site said that Apple TV doesn't work with WPA which Uverse uses.  Is there anyway around this or will Uverse and Apple TV just not work together.

    Trying to set up Apple TV with ATT Uverse.  I get errors when trying to enter my WiFi password.  One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption.  If true, does that mean Uverse subscribers cannot use Apple TV?

    Spurs63 wrote:
    does that mean Uverse subscribers cannot use Apple TV?
    No, that's a rather silly conclusion.
    There are two options:
    stop using the crappy router provided by the ISP.
    Physically connect the ATV to the router via Ethernet.

  • I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

    i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
    thanks
    ravi
    <Email removed by Host>                                                                                                                                                                                                                                       

    sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
    All computers are personal computers, a PC though is also "non-Apple" in common usage.
    Mac also is platform and OS.
    Very confused reading what you are trying to tell us.

  • The airplay in apple tv doesn't work with my ipad

    I have problem the apple tv.
    Why the airplay in the apple tv doesn't work with my ipad,every time i set the password in the air play it won't allow and the (clear password) come out on the screen

    connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

  • When Apple Care Doesn't Work

    Has anyone had problems getting something solved through Apple Care technical support? This is the second time for me with this computer. Last time, over a year ago, they finally paid to have it put in the shop. I've been dealing with them with this issue since November. Two regular level and two specialists have tried to help me. We've done all of the regular stuff, making more room on the hard drive, resetting the PRAM, taking stuff off and reinstalling the system software. The last was done on Friday. I'm still having problems. It totally freezes up at odd times. Sometimes there are black lines across the screen. It is now (since the reinstall) not recognizing my external hard drive and saying it can't open itunes. I'm so frustrated! Not only do my kids need the computer for homework, but I have a part-time home business and need to print shipping labels etc. as well as look up information related to my business. Any suggestions? I've had Macs almost since they came out and this really makes me want to get a PC. I realize they can have problems, too, but at least they are cheaper.

    "Will Apple keep making updates to 10.4"
    That final version update of Tiger is 10.4.11.
    "Should I buy 10.5? It's been my feeling that since this particular computer has had so many problems I shouldn't spend any more money on it unless I am convinced it will continue working well (or begin working well) for a while. " I wouldn't think it would be advisable to upgrade to Leopard until your Mac is stable.
    "Re: When Apple Care Doesn't Work
    Posted: Mar 1, 2009 9:35 PM
    Robert,
    Unfortunately we don't have an Apple store here. I hear there may be one soon. There are various people who contract with Apple to do repairs, so maybe I need to go to one of those. The question, then, is, how do I get Apple to pay. Since my computer is still under Apple Care and since I've had extended problems with it, they should, right?
    Carolyn,
    I didn't list all of the things that have been tried on it in the past four months...hard to remember. I had done the disk utility probably twice before. I did update to 10.4.11, as you suggested. How does this work with updating? Will Apple keep making updates to 10.4 even though they have 10. 5 out? Should I buy 10.5? It's been my feeling that since this particular computer has had so many problems I shouldn't spend any more money on it unless I am convinced it will continue working well (or begin working well) for a while.
    I didn't understand all of your directions. I found the disk utility, although it wasn't listed under the finder menu bar. I" There is a Disk Utility application on your hard drive. Applications/Utilities.
    "Were you suggesting running disk utility on the install disk? " Yes!
    " There wasn't anything to select anywhere that said Utilities/Startup Disk. " Ok, when you boot from your restore disk, you hold down the C key until you see the Apple logo on your screen. An Installer window will open. Do not proceed with any installations. Instead, from the Menu Bar (very top of your screen), select Utilities/Startup. That will open the window where you can then select your MacintoshHD 10.4 icon and click Restart. Without doing this, your Mac doesn't know disk to boot from.
    "Sorry, it's been a rough week. Maybe I'm not understanding something obvious." No problem. Sometimes you just have to sit back and take a deep breath, or call it a night and work on it in the morning. I understand ... these tasks can be daunting at times.
    Carolyn

  • Hi guys if you can figure out my question my App Store doesn't work on my i pad and my Apple ID doesn't work on my i pad but the id works on an other device.the YouTube app doesn't work either

    Hi guys if you can figure out my question my App Store doesn't work on my i pad and my Apple ID doesn't work on my i pad but the id works on an other device.the YouTube app doesn't work either??????
    Thanks

    Contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • My apple-id doesn't work with Xcode as a developer. Registration is completed, but the program don't know me as a developers ID.

    My apple-id doesn't work with Xcode as a developer. Registration is completed, but the program don't know me as a developers ID.

    Something as simple as your method of payment having expired could be causing your problems. Use the link below to check all info, especially your payment info, for your Apple ID.
    https://appleid.apple.com

  • Apple remote doesn't work with 2011 Mac Mini

    Purchased today, 8/17/2011, from Apple store new Mac Mini with Apple remote.  Sucessfully paired the remote in "Security & Privacy" area, the "Disable remote" box is NOT checked. 
    When I press the menu button nothing happens. If I start a show in iTunes the "play/pause" buttons work but nothing else. Front Row doesn't show up anywhere. Apple rep said remote worked w/new Mini just like it does with all Mac's. 
    Anyone heard why it doesn't? Is this a Lion issue that Apple will remedy. Total deal killer for me, as we prefer to use the remote when watching shows
    Very disappointed today

    There's no FrontRow with Lion it's been discontinued ...
    There's some possible work-arounds here:
    http://www.tuaw.com/2011/07/21/how-to-install-front-row-on-lion/
    http://macformat.techradar.com/blog/get-front-row-lion-29-07-11
    http://reviews.cnet.com/8301-13727_7-20084238-263/how-to-install-front-row-on-os -x-lion/
    I've not tried any of these.

  • Apple tv doesn't work with my receiver

    I updated my apple tv 3 and now it doesn't work with my Denon AVR-591 receiver.  When I called Denon they said unfortunately the firmware on my receiver doesn't update and therefore may not work with certain devices.  Is this possible?

    connect the atv to a tv which does support the resolution and then lower the resolution and then connect it with your tv once more

  • My Apple Mail doesn't work properly on a specific wifi network.

    When I'm on a friend's wifi network with my Macbook, Apple Mail doesn't refresh and get new mail. However, all the other internet functionality works just fine on the laptop.
    This is specifically the only wifi network that doesn't let my Apple Mail connect to Gmail. Apple mail works properly on any other wifi network.
    Are there specific network settings I need to check on the wireless router?

    Hello hi_team,
    And welcome to Apple Discussions!
    It's possible that your friends ISP (or perhaps even his router) is blocking the port that your email account is using to receive mail on. This port number depends on what type of account it is, whether that be IMAP, POP3, SMTP, SecurePOP3, etc. See this article for a list of common port numbers used with these different email account types.
    http://www.emailaddressmanager.com/tips/mail-servers.html
    Other than that I don't have too many other suggestions, but I'm sure somebody else will.
    B-rock

  • Weird problem: apple-F doesn't work in Finder anymore!

    I've just noticed 2 really weird problems. When in Finder, hitting apple-F (to "Find") doesn't work - I see the File menu blink for a second but the window to search for files never comes up. Also (and perhaps related?), since the latest set of Apple upgrades, when I run iTunes, it doesn't see my library. The newest version runs, but never brings up its main window. The older version does bring out its window but my music doesn't appear there. What the heck is going on?!? Anyone have any suggestions? Thanks,
    Mike

    Well, first, the likely fix for your Command-F problem (and other problems you've probably been lucky enough not to stumble upon just yet) is to fix permissions. But you'll probably find you can't do that in the first place until you do the main fix discussed in that large thread.
    Join the crew.
    owen

  • Ctrl + numbers switch between spaces doesn't work in lion

    After a fresh install of Lion I'veexperienced strange behavior in mission control. I copied all my apps,documents, settings, etc. from SL to Lion but I noticed something different in Lion. Before I changed spaces by using ctrl+number-keys but for some reasonthis doesn’t work in Lion for me. It does nothing. When I hold down ctrl anduse the arrow-key it scrolls to the next space with a smooth animation. Afterthis and still holding the ctrl-key and pressing a number-key (3 for instance)it does jump to that space with a faster animation. But after releasing thectrl-key and trying it again without any arrow keys involved it doesn’t work atall. Is there anyone hew is experiencing the same problem? Anyone with a possibleexplanation or a way to solve this issue? I’m wondering if this has somethingto do with the clean install because my father did an upgrade from SL to Lionand ctrl+number-keys to switch between spaces works fine for him.
    Thanks in advance,
    Pindakaas023

    pindakaas023 wrote:
    Anyone with a possibleexplanation or a way to solve this issue?
    Go to the Keyboard preference pane -> Keyboard Shortcuts -> Mission Control and check to see if you have the ^ + number keys set.

Maybe you are looking for

  • Can not update an assignment block with on_new_focus

    Hello Experts, I have the following problem. I created a new component which is similar to the component BP_BPBT to create activities for Business Agreements. In the overview page of the business agreement in WebUI, I have now the assigment blocks "P

  • Error Message is not displayed on the pop screen for chain end chain

    Hi, I have called a screen in one of the standard program using enhancmenets, and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen but it is displaying as log , i want the error should

  • I want to create a desk top icon to take me to a program

    In bookmarks I have a specific link to a web page that I want to create a desktop icon (short cut) that will take me to the specified web page. I find no way to do this. Any ideas?

  • Import javax.telephony.* not found.

    Hello, I am working on my first JTAPI exaples. I got this error. Can any one tell me how to over come this. What .jar file should I include in my class path. I am using jdk1.4.0 on Win XP. Thanks James

  • Run mapname.pls in windows command prompt

    Hi all, I am using owb 10gR2. I created one mapping and it is running fine through debugging. but while validation and generation,it is generating one pl sql script in the format of mapname.pls. I just want to run the script in windows command promt