Belkin Network USB Hub not working with new BT Rou...

Hi,
I received my new hub to use with Infinity when they turn it on in a few days time.
I connected the new router to the ADSL and all works perfectly without any set up needed.
I installed (on my old 'sheep-dip' PC) the BT software, and now this test PC will not connect to any USB hard-drives or Printers connected to my Belkin Network USB hub.
The Network USB hub works fine with all the other PCs in the house - but not if I install the BT software.
(Which appears to be mainly adverts and a link for those too dim to type BT.com in a browser... ;o)
I am guessing that this may be something to do with the software blocking use of the new BT Router using its own USB socket as a Network USB link - as this is being saved for 'future product enhancements'.  Is there anyway of curing this and still having the BT software on this machine?
Thanks!

Is this issue likely to go away when the Infinity service starts? - I am guessing not?

Similar Messages

  • Wireless iPod syncing - Belkin Network USB Hub F5L009

    I stumbled across a nifty gadget today, but I'm having some issues and would like some help. The Belkin Network USB Hub is a thin black box about the same dimensions as my Airport Extreme base station and pulls a nifty trick: when attached to the router via Ethernet, the hub tricks your computer into thinking the attached USB devices are actually plugged into your computer.
    My purpose for this purchase was wireless syncing of my iPods and iPhone. Since Apple seems to have some kind of vendetta against people doing this, I wasn't expecting it to work. But it did - for my old iPod mini. The iPod Touch and iPhone 3G showed up fine in the Belkin utility, but iTunes will not recognize them.
    I'm still waiting on Belkin tech support. My hub is showing driver ver 1.3.0, although Belkin's support page seems to think ver 1.5.0 was included in the driver package they have posted out there. Only thing is the Silex kext in the package doesn't seem to match up. Frustrating!
    Anywho, I figured someone out here might have an answer. Anyone run into this issue/know how to get the iTouch/iPhone to show up in iTunes + sync?
    Thanks!

    UPDATE: LETTER FROM BELKIN
    "Dear mr XXXX,
    We are already addressing some issues about the performance and stability of storage drives via Mac OS 10.5.6. Issues with drives disappearing or not being detected at all have been reported by one or two other users, replicated here and passed on to the developers for them to fix in a later version of the software. Unfortunately however I have no information about when the new software should be available. This does mean that for the moment there is no fix for this issue I`m afraid.
    best regards
    Daniel Powis
    Technical Support Escalations Coordinator
    Belkin Ltd"
    So hold off from buying this if you have 10.5.6!!

  • Print server belkin network USB Hub (F5L009)

    I just bough a Belkin network USB Hub print server and downloaded from their website the mac 10.4 compatible software (their is no 10.5 yet), when I want to open the application I get this error message: _SXUPTP Driver has not been installed, please reinstall the application._
    I called Belkin and they said that they were not using this driver and that it was a Mac issue so I call Mac and they said it's a Belkin issue. How do I fix that error? Please Help!
    Thanks

    I agree! Like I said, I've been using it for a couple of weeks with NO problems - but I was on 10.4 (Belkin posted the beta Mac driver just a couple of weeks ago). This is the ONLY item that didn't work flawlessly after upgrading. Unfortunately, the Belkin customer support is almost non-existent...in fact, their reply to me was via a posting on a web page (thereby eliminating the possibility of me seeing a Belkin email address to which I could then reply to).
    However - I will also say that for the two weeks that it worked with my Mac - it worked perfectly! For now, though, it's back to being a gateway for my wife and kids assorted XP machines.

  • WRT54GS and Belkin Network USB Hub

    My Linksys router works fine. I'm hard wired in with a desktop computer. I have a Belkin Network USB Hub that will not work with the router. The router appears to be blocking the USB hub. If I plug the hub directly into my computer, then it will work. I have reset the router to factory setting and I still cannot see the hub. I can not find anyone that has problems with installation of the hub. How can I use the hub with my router?

    The Hub I refer to connects to a router. The USB hub does not expand the number of USB devices I can use on my single computer. The hub is used to share USB devices across the network. I would like to share my printer, scanner, and external hard drive with all my computers in my house. The hub uses an Ethernet cord to connect to the router. My issue is the hub does not work when I connect it directly to the router. If I connect the hub to my computer with an Ethernet cable, then the connected USB devices show up in the loaded Belkin software (and work fine). Once I connect the hub to the router through an Ethernet cable, the computers on the network can not see any of the USB devices. This is why I assume the router is "blocking" the the network USB device. Everyone says how easy the hub is to setup. Just plug it in. I must be missing something. Belkin tech support said to contact my router support.

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • Line-in not working with new driv

    Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

    The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
    That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

  • Zen Micro Photo not working with new XP SP2 install

    Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
    When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
    There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
    Any help greatfully received!

    Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
    Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
    Filesize : 27.9 MBDownload

  • Ipod does not work with new usb

    i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

    tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

  • USB-Hub not working on LEFT USB port?

    Hello,
    I have installed Windows 7 Ultimate 64 Bit on my MacBook Pro 13" Retina (Early 2013) and it's running fine. Boot Camp version: 5.0.5033.
    But I have one problem: I bought an external monitor (Dell U2414H) which has an built-in 4-Port USB 3.0 hub. So I connect the Dell monitor using a DisplayPort 1.2a cable and an USB 3.0 cable. But Windows only recognizes the monitor's built-in USB hub when I plug the USB cable into the right USB port (when I sit in front of the MacBook). Then it works without problems. But when I plug the USB cable into the left USB port of the MacBook Windows only says "USB device not recognized". But other devices like USB sticks and USB drives also work without problems on left and right USB port of the MacBook. Also when I boot in OS 10.9 Mavericks the monitor's USB hub is working on both USB ports of the MacBook. So I think it isn't a hardware failure. I also re-installed Windows, but I have still the same problem.
    Do you have any idea, why only the monitor's built-in USB hub is not working in Windows on the left port of the MBP or even how I could fix it?
    Is Boot Camp 5.0.5033 the most current version? I checked the box to download the latest Windows support software and also didn't find anything newer than 5.0.5033 to download, but sometimes I read about 5.1.1 - but where could I download it? AND: Doest it help?
    Thanks in advance!

    I think I've hit a variation on the problem you're enoucntering.  I have a late-2013 13-inch Macbook Pro Retina.  I've just installed Boot Camp and a copy of Windows 7 Pro.  This is my first experience with Boot Camp and Windows on a Mac, so I'm in foreign teritory.
    The install all went fine and Windows 7 booted up fine and so far, all hardware seems to be working as expected, with one exception.  Things went sideways when I tried use it in "clamshell" mode - lid closed with external monitors and all my peripherals attached to a USB hub.  I set up Boot Camp to boot into Windows and attempted to boot.  It would give me the usual boot-up fanfair and a then a gray screen for a few seconds, and then it would reboot.  It just rebooted over and over.   I eventually discovered the issue was the USB hub - without the hub connected , it would boot just fine.  Once it was booted into Windows, I could attach the the hub and everything would be recognized normally.  Furthermore, I could put the system in sleep mode, wake it up and everything would be working fine.  But it simply refuses to boot the USB hub attached.  I've stumbled on a couple related threads - see https://discussions.apple.com/message/23802231#23802231.  The suggestion is that only certain hubs to not work.  I've got two different high quality powered hubs and both display the same behaviour.  The other point is, that when booting into OS X with the same hub, it works perfectly.  So it's a strange problem.
    Note that after reading your post, I did try the hub in both right and left USB ports and that made no difference in my case.  I do have one more hub to try (built into my Dell monitor).  I'll report back if that happens to work.

  • USB Hub not working

    I have a hub which has worked fine but is now no longer working. A light on it still lights up and it is recognized in System Profiler. Also items plugged into it are also recognized in System profiler.
    Any ideas?
    Thanks
    John

    Have you tried a new USB cable between the computer and the USB hub?
    And if another USB port than the one being used now, has not been tried
    to see if the issue is in one port on the computer, and not another, try it.
    Also, sometimes the lights are on, but nobody is home. The hub can be
    bad and still appear to be there.
    {Have you tried the computer with only the keyboard and mouse attached?
    If that works OK, then consider the limits of port power to run other USBs.
    Then, a new powered USB hub may work, if the Mac's ports aren't bad.}
    There may be a low-power situation (assuming USB hub is powered) that
    somehow does not translate into a notice or 'warning dialog box' on screen.
    Perhaps one of the connectors in a USB cable or in the computer's USB
    ports, necessary for data flow, is not working correctly?
    At one point, I'd bought a two pack of powered USB hubs; to find one of
    them did not work right out of the box. It was un-powered, yet the AC
    adapter supplied adequate power. Items appeared in Sys Profiler, yet
    if more than one were used, the Mac's ports could not sustain them.
    The package was such a low price, I kept the working one; the store I'd
    bought them from no longer had any in stock. The good one still works.
    Have you tried to reset the SMC or 'power management' unit device?
    This may be a last effort of desperation & signals a service tech visit.
    Good luck & happy computing!

  • Hp Photosmart not working with new router

    My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

    @Ann99, welcome to the forums
    I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
    I have some questions and some things for you to try.
    1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
    2. What did tech support determine the issue was when you called them?
    3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
    Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
    The Printer Is Not Found During a Wireless Network Installation
    4. What Operating System are you running on your computer?
    5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
    Please let me know all of the information and results from your troubleshooting above!
    Have a terrific day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Isub not working with new imac

    the help menu is telling me to make sure that the isub is plugged in, and then to make certain it is selected under sound preferences... the only problem is that the imac is not picking up that the usb is even plugged in- there is no isub option that comes up on the sound preferences.
    the isub works fine on my older mac, but just is not being read on the new one. any guesses other than my old isub is obsolete with my new imac?
    thanks
    -pd

    The iSub is sweet! It's the best sub I've ever had! There's no reason for it to NOT work with the new Macs. It's a bummer. I still have my iSub, maybe they'll start supporting it again someday.

  • Printer not working with new router

    I have a new router and my laptop with Windows XP is working Ok
    My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
    What can I do

    Hi @Jobrig,
    Welcome to the HP Forums!
    I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
    For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
    In the meantime, please see the following:
    This printing guide, Print Jobs are Stuck in the Print Queue.
    This website, HP Wireless Printing Center, may also help.
    Hope these guides will help you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

Maybe you are looking for