Belkin Print Server support for Epson Stylus photo R200

I have just installed a Belkin Wirless G adsl modem router, which works very well and I very satisfied with it. Along with this I purchased a Belkin Print server F1UP0001uk to drive my Epson stylus photo R200. While I can see my Print server and ping it satisfactoraly and it can see my printer. I can't get it to print.
Belkin tell me that I have to change the CUPS port from 515 to 9100 for print server port1 or 9101 for port2 on each machine I want to connect from.
How do I do this?
G4   Mac OS X (10.3.9)  

What they are describing is the HP Jetdirect protocol on OS X, called raw/port 9100 printing on Windows. To use port 9100, in Printer Setup, select IP printer > HP JetDirect and it will work (9100 is the default port number). To use port 9101 requires the advanced method. In Printer Setup, after you click ADD, hold down the option key while clicking More Printers (you may need to pause a bit before the More Printers, because OS X is searching for Bonjour printers). At the bottom of the new menu, select Advanced, then select Appsocket/HP Jetdirect. Name it. Fill in the URI like:
socket://[IPofserver]:9101

Similar Messages

  • FIX for EPSON Print CD V2.02 - EPSON Stylus Photo R200 - MAC OS 10.5.9

    I thought I'd post this ridiculously long info sheet on what finally got my R200 to work with EPSON Print CD and 10.5.8 just in case it might help someone else BEFORE they spend days searching for a solution.
    Check the printer driver information in System Preferences, Print & Fax. If it says anything other than EPSON SP R200 Series, you’ve likely located the problem. My system showed the Gutenprint v5.1.3 and /or CUPS/+GIMP... I originally replaced the Gutenprint driver file with the CUPS... file thinking this would solve the Gutenprint driver problem. But, as I continued to look into what was going on, I think I found out that both driver files are actually considered Gutenprint driver files.
    1. Select the hard drive where the operating system is located.
    2. Select Library/Printers.
    3. Select the Epson folder and delete it and then Empty Trash to make sure it’s gone.
    4. Select Library/Preferences.
    5. Select the Epson folder and delete any files that are there.
    (Steps 4 & 5 might not be necessary, but I’m listing everything that I did.)
    6. In System Preferences, select Printers and Fax. Control click in listing area and select Reset Printers.
    7. Load the Leopard Installation CD and select Optional Installation.
    8. Select Printers and select Epson. This will reload the printer drivers for all the EPSON printers that are included on the install CD.
    9. Go back to the System Preferences, Printers and Fax window. Click on the + sign to add a printer.
    10. There will likely be a listing with Printer Name as EPSON Stylus Photo R200, Kind as USB.
    11. Click on an arrow in the Print Using: box and select EPSON SP R200 Series. The printer icon changed dramatically at this point, with a rainbow of colors on the document shown coming out of the printer.
    Note: **Working within the Print & Fax app seems to be key to getting the settings corrected.** Someone else pointed out that they also found this necessary. However, I couldn’t get the proper “Print Using:” option to appear until I cleaned out the Library/Printers/Epson folder, “Reset Printers”, and reloaded the EPSON printer drivers from the Leopard installation CD.
    I had previously done the “Reset Printers” and reloaded the printer files, but as was advised against in the post I mentioned, I selected the “More Printers” option. That’s where I found the EPSON Stylus Photo R200 listed with the CUPS+Gimp ... and the Gutenprint driver listing options. Selecting what appeared to be the Gutenprint alternate printer driver didn’t help at all. I’m not sure if the EPSON SP R200 driver file was missing from the original listing of printer drivers or if I just missed it. I certainly would have looked for it if I had known it was the one that’s needed.
    12. Open the EPSON Print CD V2.02 app. Although I had already installed the Easy Print update, I got a message saying that the application needed the update to work. So, I reinstalled the Easy Print update.
    13. After reinstalling the Easy Print update, I reselected Update Printer Information. Much to my amazement, I got a message and a progress indicator showing the Printer Information was being updated to reflect the EPSON Stylus Photo R200 printer.
    14. When the Update Printer Information process had completed, I clicked on Print and suddenly found that I was able to choose Select Printer and pick the EPSON Stylus Photo R200 and CD/DVD wondrously appeared in the Media Type.
    After this point, all the other instructions that are provided from EPSON seemed to work just fine.
    Hopefully, there’s enough information in here somewhere that people with other operating systems and printers might at least be able to get a clue . . .

    I dug around on the Epson site and found this which seemed to address the exact problem so they obviously know about it. Unfortunately even these rather drastic steps failed to solve the issue for me.
    http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-Photo-2100/D rivers-Support?target=article&extn=.html&articleId=3798

  • Problems printing using iPhoto and Epson Stylus Photo R2400

    I'm using OS 10.5.6 and iPhoto 8.0.2(402) to print pictures on my Epson Stylus Photo R2400.
    I have other printers set up on this computer and they all print everything just fine regardless of the program I am using.
    Using the Epson Stylus, I'm able to print from any other program than iPhoto.
    When I try to print pictures from iPhoto, I get the error message...
    can't open ` /private/var/spool/cups/tmp/4a18c65407c9b (the numbers at the end changes each time I try to print.
    When I go in to check the folders out to see what might be causing the problem, the permissions on the folder cups and tmp have the following rights set up. system = Read & Write, _lp = No Access, everyone = No Access.
    I've been able to set the everyone setting to equal Read & Write access, but I can't get the _lp access to change. When I reboot the computer, the everyone setting goes back to No Access.
    Any ideas for how I can get this to work?
    Thanks,
    Bill

    Welcome to the Apple Discussions. I don't have a tried and true fix for that but I would start with dumping the printer driver via the System/Print pane and then reinstall it. Go to the Epson site to download the latest driver for that particular model in case there's a newer one released.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • No printing on CD's/DVD's (Epson Stylus Photo R200)

    Unfortunately it seems that I cannot print on CD's/DVD's anymore since I have installed Snow Leopard.
    I am using the Epson Stylus Photo R200 which was no problem with Tiger or Leopard.
    When using the Epson Print CD program I am getting the error message that the driver for this purpose is not installed.
    I have connected the printer via USB directly to my Mac Pro, then checked the website of epson. Unfortunately they have only older drivers. Never the less I tried it with them. Same problem. The I installed all epson drivers from the Snow Leopard download page again. Same problem.
    Tried it in Windows XP (Parallels). Same problem. Very bad.
    What can I do?
    Thanks in advance
    Thorge

    I don't know if this helps, but I've always had problems printing wireless with my Epson Photo Printer 580. I am now able to print CDs wireless by going to Epson's North America site and downloading the EPson Print CD v2.0 as well as as the common updater.

  • CD printer driver for Epson Stylus Photo R265

    Just bought an Intel iMac 20" together with a Epson Stylus photo R265. It should print CD's and DVD's but, every time I try to print these, it tells me that the CD printer driver has not been installed.
    After reinstalling the drivers from the cd which came together with the printer it still didn't print CD's. Also installing the drivers from the Epson website didn't do the job.
    After discussing this problem with people from the Epson helpdesk, they answered that the CD printing feature only works on powermacs and that Rosetta should do the trick on Intel based Macs. Knowing that Rosetta operates automatically in OS 10.4.8, this answer was unsatisfying.
    I now consider to buy a Canon printer but I am not sure if these printers (cd printer drivers) have the same problem with Intel based Macs.
    Does anyone know a proper solution?
    iMac 2.16GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    Hello jotifelu
    Right click here->http://tech.epson.com.au/
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

  • Kodak Professional paper color profiles for Epson Stylus Photo R2880

    Is there a color profile for the Epson Stylus Photo R2880 for Kodak Professional paper (lustre)?

    A member of the Brand Management Group responsed. There is no color profile for my printer at this time. However, I was given a profile to try and it worked very well.
    Thank you Brand Management Group.
    Henry

  • Help! Trying to re-install Driver for Epson Stylus Photo R300

    My computer recently crashed and I had to do a system re-install. My system then updated to OS 10.4.8, I am on a 1.67 Power PC G4 Powerbook.
    After re-installing everything my Epson Stylus Photo R300 is not working. I could not find the original disk so I went to the website and downloaded the installer which extracted into "epson11601.sea" . When I go to run this file the computer launches a program called Automator.
    Pleaes help. I need to print some DVD's for work and I can't do this until I re-install the Epson Drivers, etc.
    Thanks -Erik

    installer which extracted into "epson11601.sea" .
    When I go to run this file the computer launches a
    program called Automator.
    This is a problem with Stuffit Expander 11. Luckily the .sea file is still able to be used. Highlight the epson11601.sea file and do a GetInof (command-I) for it. There will be a section on what application to use to open the file. Change the application to "epson11601.sea". The .sea extension indicates that it is a Self Extracting Archive. It is indeed a small application that does the work of extracting the files in the archive.
    Matt

  • Printing from XP to Epson Stylus Photo R260 on a Powermac G5

    Tried configuring this set up a couple different ways (Bonjour, add a printer utility, tech.ifelex tutorial) and in all cases the printer is detected and configured. I send a job from the XP, never see it arrive on "Active" list of the Stylus Photo print queue on the PMG5, but after a minute of so it IS on the list of "Completed" print jobs. Just never prints. Connected via USB to the G5, XP is on Airport wireless, Windows print sharing is on and the printer is selected for sharing. If I try from my Macbook it works fine.
    Any ideas?

    BTW, downloaded updated Epson drivers last night for both the Mac and XP boxes. I have them installed but haven't tried testing them again with the printer connected to the G5 and printer sharing "on". I currently have the Epson on the printer port for the Airport Extreme and it works fine for both the Mac and XP boxes. The problem is you can't access many of the advanced printer options the direct connection to a computer provides, like ink levels and paper type selection.

  • Printing DVD labels to Epson Stylus Photo RX700 getting error

    Two Parts
    I've got a 800mhz G4 PowerBook running 10.4.11 and I can print to printable CDs/DVDs using either "Epson Print CD" which is HORRIBLE software, or Roxio's Disc Cover RE (Roxio Edition) from Toaster 9 (which is great) with no problems.
    When I try to print from my white 24" intel core2duo with 10.5.3 with either of those the Printer Settings are crossed out so I can't select the settings it tells me to in order to print the label for the printable CD or DVD.
    I've downloaded the latest print driver from Epson (2.3.1). I've tried uninstalling it and re-installing it and I get the same thing. Any ideas?

    i have a similar problem and mine just say no drivers availible during the installation.

  • MacBook Pro unable to print to HP LaserJet 1320 or Epson Stylus Photo R200

    I cannot get my MacBook Pro to print wireless to either one of my printers and I haven't tried to connect the laptop to them. The HP 1320 doesn't show up in the 'Add Printer' dialogue box. The Epson printer shows up in the print dialogue box but there's an icon in front of the name that looks like an electrical plug. The print queue dialogue box says the printer is offline (the printer is, indeed, turned on). After reading several threads I installed the hpijs software to no avail. I also upgraded the Epson printer drivers from Apple support - again, no-go.
    I also tried to install (or reinstall) the MacOSXServerUpdCombo10.6.6.pkg. I got a message saying that I didn't have the right kind of computer for this. (say what?)
    My desktop is a PowerMac G5 with the Duel 2 GHz PowerPC G5 Processor. It's running 10.5.8.
    Is there other information I should supply? I'll admit that I'm not terribly techy and will appreciate any and all help possible.
    Thanks,
    peggy

    This leads me question two of the three assumptions listed and I don't know how to answer them:
    How do I know if the HP 1320 is correctly configured for the wireless network router?
    If I read your original post correctly, you've used the HP on the network wirelessly before. The problem came when you upgraded your OS X to a newer version.
    The HP printer should STILL be configured correctly for the WiFi router. The HP-printer-to-WiFi-network-router configuration did not change when you installed new OS software on the computer.
    It might help to think of it as installing a wireless extension phone in your house. Your phone number didn't change. Your house address didn't change. You've just added a wireless extension phone to what is already in place.
    How do I know if my Mac (which Mac the desktop or the laptop?) can still connect wirelessly to the network? (The laptop picks up wifi - is that the indication that it connects?)
    Can you connect to the internet with your laptop wirelessly? If you can, that (95% probability) means that you're successfully connecting to the network that includes your HP printer. (The 5% occurrence is if you're actually connecting wirelessly to someone else's network, perhaps a neighbor with an unsecured WiFi network).
    Moving on - where do I find the printer's IP address?
    I tried to answer it in #5 of my original post, but I didn't realize the HP JetDirect interface had a separate button on it.
    So, paraphrasing again from HP...
    Plug the printer into a power outlet and turn the power on the printer.
    Wait a few minutes and then *print a network configuration page by pressing the black button on the network card on the back of the printer*.
    If the IP address on the network configuration page is 0.0.0.0, then wait a few minutes and repeat step c. Do this until the IP address is not 0.0.0.0. The printer will have an automatic IP address (Auto IP) which should look like 169.254.x.y , where x and y can be any number between 0 and 255.
    It came from this HP support page: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=410622&prodTypeId=18972&prodSeriesId=410622&objectID=c004852 63
    If and when I get to step 9 - will this list be displayed after I enter the printer's IP address?
    Hopefully, yes!
    Also - after I installed the hpijs driver and the HPPrinter Driver I can't find them within the Applications folder or anywhere else. Where should I find them? Would it be a good idea to move them into the Applications folder?
    The HP-ij-s driver is PROBABLY for inkjet printers and is not needed. It doesn't take up much space, so it's probably not worth worrying about at this point. The needed drivers SHOULD already be available as part of the OS X installation you already did, and you shouldn't need anything additional.
    Just opening System Preferences, Hardware, Printer & Fax and trying to add the HP printer (once you have the IP address) should be all you'd need at this point.
    Is there anything I should be aware of in conjunction with my desktop computer (PowerMac G5 - 10.5.1)?
    Sorry, I don't think I can help you with the desktop PowerMac G5. If that configuration did not change, then it should still work.
    Thanks for all of your help. I don't know what I would do otherwise.
    No problem. It's not fast or immediate, but in my experience (since 2007) eventually almost every question posted here in Apple Discussions gets a correct, useful answer!

  • Problem to print with iPhoto and epson stylus photo RX620

    I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

    First I have no idea in the world what "reglage" is
    But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
    LN

  • Epson Stylus Photo R1800 on Linksys Printer server

    hi, I'm currently running Tiger 10.4.11 on my power book G4 and trying to connect to a network printer on a Linksys Print Server (PSUS4). The printer connected to the server is an Epson Stylus Photo R1800.
    I'm able to print perfectly from my computer via USB direct, but when I try to find the printer as a network printer I can't locate it.
    The print utilities finds the location of printer from the Linksys server, but none of my drivers are coming up that are compatible to the printer when it finds it like that.
    When the printer is turned on the print browser cannot find it at all, but when it's turned off the browser comes up with the name Linsys gave it to be discovered. It says it's connected via AppleTalk, but when I click on it to try to add the driver doesn't come up. BUT it's the correct driver when I connect manually.
    What am I doing wrong? I was on the phone with tech support for an hour and 24 minutes only to be told (when transferred to a specialist) that they aren't trained for this kind of thing, neither is Linksys (who I spoke to for 30 minutes). I read the thread on the similar issue to this and don't think that it's a driver issue, but a print server issue, what do you think??
    thanks for any help.
    -melissa

    Driver issue - the driver provided by Epson was written for USB only (well, maybe Firewire too for the 1800). You will have to use either the Gutenprint driver or the printfab driver for network printing:
    http://gimp-print.sourceforge.net/MacOSX.php3
    http://www.printfab.net
    Sounds like your print server will work via appletalk -- but, if you want to try IP printing, don't forget to enter the correct queue name for the LPD and IPP protocols.

  • Purchase advice? Considering the Epson Stylus Photo R3000 Inkjet Printer

    Please advise - we're considering the purchase of the Epson Stylus Photo R3000 Inkjet Printer.
    Replacing an Epson Stylus Photo R1900 after years of frustration due to no support for printing from Illustrator on a Mac. Many others have posted in frustration as well - a common work-around is to save as PDF, then print from PDF. Our work-around involves PrintFab but we would like to remove that element from the equation.
    We have a sizable investment in Epson paper so staying within the Epson family is necessary.
    Also must be able to print at 13x19 inches (Super B) which limits our choices.
    Given all of the above, can anyone advise for or against the R3000?
    Thanks in advance!
    -Chris

    This Apple document says the driver is available for auto-download and install when you add the printer in Print & Scan:
    OS X: Printer and scanner software available for download
    OS X has a new paradigm for getting print drivers.
    Manufacturers give the current driver(s) to Apple to put on its servers.
    OS X keeps an "index" of where to find drivers (whether on the server or already installed on your Mac), and when you Add the printer in Print & Scan prefs, or on demand in the print dialog, OS X finds and uses the driver.
    No need to download and install anything yourself.
    If your Mac says it can't find the driver, you can force CUPS (OS X's print system) to re-build the index of drivers (both online and already installed drivers) by Resetting Printing System:
    OS X Mavericks: Reset the printing system
    If you're still not getting it working, you can download and install all the epson drivers from:
    Epson Printer Drivers v2.18 for OS X
    (you may still need to Reset Printing in order to have the drivers found.)

  • Driver for windows 7 ...epson stylus photo p50

    Hello can anyone help I am trying to download a driver windows 7 for Epson stylus photo p50 printer. thanks so much

    You will have to go to the Epson support website and see if the desired Windows 7 driver is there for downloading.
    Epson has sole responsibility for the support of their products.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • TS3147 Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server.

    Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
    I am using mac osx 10.8 and now cant get print software for epson R2000 printer.

    After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then  the "software ... is not currently available..."
    Resetting  the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from  here
    did not help either, downloading Epson Printer Drivers.
    In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
    But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !?

Maybe you are looking for