Belkin UPS does not show up when connected to MacPro via USB

I have just replaced my aging DP G4 machine with a MacPro. I added a UPS with a USB connection. It was advertised as being Mac compatible.
After many tries to get the horrible Belkin software to work, I gave up. The worst part is that The UPS will not show up even in the Energy Saver preference pane.
I checked if the USB connection is working OK on the UPS and it seems to work, although it reports itself as "Cypress Semiconductor Serial to USB" in the System profiler.
Any ideas of what I could try to get this to work? As of now, it I am not around to shut down the machine, the battery backup is useless...

I can't offer any real help here other than to say that the Belkin UPS does work with a Mac Pro. I was running one on my G5 and when I replaced that last week with a Mac Pro I simply plugged it in and it worked.
I have never tried to use the Belkin software; I read somewhere on these forums I think that it's rubbish and because OS X supports UPS out of the box I have always relied on that.
I am connected via USB. The Energy Saver UPS panel simply shows the UPS name as "UPS", and in System Profiler itsimply says "Belkin".
BTW, I also have a Belkin UPS on my wife's iMac and it does exactly the same.
I know they work because we have had power outs here and the UPS devices have kicked in just fine.
I am guessing—but this is only a guess—that you may have some remnants of the Belkin software still on your system and that this may be interfering with Energy Saver. I would maybe try to do a finder search (apple+F from the desktop) for "Belkin" and see if that shows anything. Maybe ask Belkin what gets installed so you could check it's all gone?
David

Similar Messages

  • Focusrite Saffire does not show up when connected to Imac by Firewire 800

    When I connect my focusrite saffire to my i7 imac 27" via the firewire 800 port, the device does not show up on the computer, however it does light up indicating it is being powered off the firewire. When I click on "about this mac<more info<firewire", all I see is this " Maximum Speed: Up to 800 Mb/sec", I have checked and my "AppleFWAudio" file is up to date. The Focusrite uses Firewire 400 but I use an adaptor which converts it to 800, I have tried different adapters and cables from a number of companies which were suggested by Focusrite themselves and none of them worked.
    Any ideas on what the problem could be?

    I too was having problems connecting my Focusrite Saffire to my new iMac 27" i7.  It would light up and click several times, but it would never be in a ready state w/ both LINE indicators being green.  The Saffire Control software would say the the Saffire DSP didn't load and to unplug it and re-plug and wait for the lights to turn green, but that never happened.  I called Sweetwater (where I bought the unit) and they didn't seem to know of any prevailing issues, BUT the tech did suggest to reboot the iMac in 32 bit mode (hold down the '3' and '2' keys during startup).  I did that and replugged the Saffire but it exhibited the same problem.  I unplugged it and left it for like 3 minutes then reattached the firewire cable and it mounted.  I opened up the Sound preferences and was able to select it and get sound out of it.  I then opened DP and ran a quick test and it worked as well.  The next test was to reboot into 64 bit mode.  I did that while the Saffire was still connected and it actually stayed mounted and connected upon reboot.  I have my System Sound output running through it right now and its still working.  I haven't tried DP yet, but will do that later.  I'm not going to reboot again until I hear back from Focusrite.  I sent in a help request last night. 
    Hope this helps someone.

  • IPod does not show up when connected to USB port; why?

    My grandson has an iPod Shuffle.
    Working with iTunes6, I connected the iPod to the USB port becasuse we wanted to get a print-out of the 75 songs there.
    It did not show up in iTunes listing; why??
    We know the songs are there; they can be played.
    The iPod was identified back in February as "Valentino" on a different computer; I wish I had that machine because "Valentino" showed up on it.
    BTW, I have now up-graded to iTunes7 but the iPod is not here to try it out.

    A whole list!! Such as?
    Besides, after reading the emails about iTunes7, I'm in no hurry to try anything right now.
    I'll wait until iTunes7 gets stable.
    If iTunes7 were to wipe out my ten year old grandson's 75 songs (as apparently it is very capable of doing) from his iPod, Apple can forget about him as a customer for a long, long, long time.

  • TS1363 My iPod Classic is frozen. it does not show up when connected to iTunes

    My iPod Classic is frozen. It will not open iTunes or show up when I open iTunes manually. How do I fix this?

    thanks. I followed all the steps but it said that itouch was unable to connect to itunes because a passcode needs to be entered first, but I'm unable to enter the passcode because the itouch is disabled and all I see is the red message Ipod is disabled. How do I get pass this message to where I can access a keypad to enter code? thanks!

  • Camera does not show up when connected to Macbook Air

    I'm connecting my Sony NEX-F3 to my new Macbook Air for the first time.
    When connected via USB the screen on the camera says to 'Check the connected device'. On my old Macbook the camera would autmotically appear on my desktop however this one is not responding at all. I have checked Disk Utility & Finder to see if it has appeared there instead but no luck, any advice?

    This is a new computer? Why not take it to an Apple store and have the techs there work on it. I would take the camera and hard drive along so they see exactly what you see.
    The service is free. But make an appointment:
    http://www.apple.com/retail/geniusbar/

  • Macbook 2007 does not show video when connected to a moshi, please help

    im using the hdmi cable but iam not getting an video?

    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    Also check that you aren't blocking cookies.
    *http://support.mozilla.com/kb/Cookies
    * https://support.mozilla.com/kb/Enabling+and+disabling+cookies

  • External Drive won't show up when connected to Airport via USB Hub

    I just got a new external HD and hooked it up out of the box. There were no problems until I tried copying 117 files to it. An error was encountered (Couldn't complete command due to something or other) and after that I never showed up on my computer again. I tried rebooting... hooking it up directly to the computer...the whole bit. Nothing.
    So I then hooked it up to our laptop. It was found, I erased it, hooked it up to the desktop... it was found there as well... but whenever I hook it up wirelessly via the USB Hub and Airport... I can't get it.
    Everything else that's hooked up to the hub is still working wirelessly (Printer Internet).
    Is this an isssue with the drive?

    Ya' know.. I'm not totally sure. I went to Airport Utility... selected my base station, clicked on Manual Setup... clicked on Disks and saw that my USB Drive was listed. After that I opened the finder, went to network, connected to my base station from there and my USB Drive popped up and I mounted it.
    It's been working fine since.

  • When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

    When using photoshop elements as editor in iPhoto the pic does not show up when PS opens

    Ralph9430 offers a good suggestion.  But you may need to do this before taking his advice:
    Check in iPhoto's Preferences (which you can open from the iPhoto menu).  Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
    If it is set to "iPhoto", you won't be able to get to Image Capture easily.

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available.  Does not show up when I search for it.  Plenty of memory . . .

    I Have an iPad mini running iOS 7.1.2,  I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list.  It does not show up when I search for it so can't open t that way either.  It doesn't require iOS 8.  Can't delete and reinstall, cause not icon.  This is not a normal "app won't open" question.  it doesn't start the. Stop it just doesn't seem to exist.  Any help is appreciated

    Hello Chelleuri,
    Thank you for using Apple Support Communities. 
    The following article provides information to trroublehshoot issues with installed apps, including not opening.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Regards,
    Jeff D. 

  • ITunes does not start anymore when connecting iphone

    Hello,
    since my latest upgrade of itunes (still under snow leopard) itunes does not start anymore when connecting my iPhone 4 to my Macbook Pro.
    Meanwhile I upgraded to Lion and installed the latest itunes patch but same behavior,
    Does anybody has an idea to solve this issue?
    Thx,
    Hendrik

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • Itunes does not start automaticly when connected although auto is thicked help?

    Itunes does not start automaticly when connected although autostart is thicked can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • My iphone 5 does not show callid when there is a call, i used to get it but after my trip to China, the cller id is always unknown, how can I get it back? thanks

    Hi
    My iphone 5 does not show callid when there is a call, i used to get it earlier but after my recent trip to China, the cller id is always shows unknown, how can I get it back? thanks

    Thanks Malcom,  I was able to restablish the caller id feature through the carrier as you suggested

  • Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo.  Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

    Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo.  Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

    If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

    I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

    On the iPad tap Settings > iCloud
    Toggle Documents & Data off then back on then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    On the iMac open System Preferences > iCloud
    Deselect the box next to Documents & Data then reselect it then restart your iMac.

Maybe you are looking for

  • Posting in local currency on foreign currency account/correctionOfValuation

    Hi everybody! I have a problem, and I hope someone will help me. Is there any way to make posting in local currency on account with foreign currency as the account currency? The reason why I'm asking this, is that I have to make corrections to curren

  • Joining WLC Issues

    Hi, I'm having difficulty with a lwapp joining our WLC.  The error mesage is: *Mar  1 00:00:44.284: %LWAPP-5-CHANGED: LWAPP changed state to JOIN *Mar  1 00:00:50.285: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the Join response *

  • Setting Cell Borders

    I want to be able to set the borders of a cell in Numbers 09 individually. Having chosen one selection, say a left border and set it; if I then select the right border to set it the setting of the left border is removed which is most frustrating. Is

  • Position of message container

    Is there a possibility to change the position of the message container? I would like to have the container bottom.

  • Http LOCK method using ms-word

    Hi all, I'm trying to open a .doc file via MS-word that will be downloaded from my server. I provide word with a url that maps to a servlet that should serve the file from a DB, and write it back to the client (MS-word). The thing is that word sends