Belkin UPS on Windows 7 System

I have a nice Windows XP/Pro machine configured to meet my needs (quad core processor, 4GB RAM, to video adapters driving three LCD displays). I'm ready to upgrade from XP/Pro to Win7/Pro.  The system is supported by a Belkin F6C1500-TW-RK Uninterrupted Power Supply rated at 1500VA. The UPS is now monitored by the Belkin Bulldog Plus monitor software on the XP machine.
My problem is that the monitor software was never released for Windows 7, and that appears to be my only roadblock to upgrading from XP/Pro to Win7/Pro.
Belkin's response: "We regret to inform you that due to recent events Belkin has consolidated its operations and has decided to exit from the UPS business. The drivers for the Win 7 operating system is not available and also unfortunately there will be no drivers updated for Win 7 operating system."
Since Windows 7 has an XP mode (which is supported by my Q6600 processor), can I run the Bulldog monitoring software under it?

Here How you do this thing with Belkin 4.0.2    The software runs script (bat) file at shutdown.  Get old clunker and load XP32 and Bulldog software.  Mine is remote accessable from a radmin server set up so use laptop to log on
and access.  No monitor or keys. Just an old XP box with Bulldog loaded and USB cable to Belkin UPS ( mine the 1200VA that like a brick) and network connecting.  Set up XP box as telnet client. Set up The NEW W7 64 or 32 (whatever) as a telnet server. 
Power fails XP box goes into shutdown but runs bat file before it does that calls up a VB script that runs up the telnet login for W7 box and has commands to shut it down.
You can also use the same procedure to shut down a NASlite server as NASlite has telnet Server built in to its Linux setup.
Essentially with a little work you can over the network shut down later op system machines and Naslite servers over the network using Telnet clients a batch file and VBS scripts for each machine to be shutdown.  Remeber that Network switch, Router etc
need to be on a small UPS so network avaliable when power fails.
This means only one box (XP with belkin loaded) ever needs to be monitoring power and all other machines can just be power connected to their own UPS without talking Via network or USB as one box sends commands using telnet function to shutdown all when
power fails.
Hope this helps

Similar Messages

  • Belkin UPS does not show up when connected to MacPro via USB

    I have just replaced my aging DP G4 machine with a MacPro. I added a UPS with a USB connection. It was advertised as being Mac compatible.
    After many tries to get the horrible Belkin software to work, I gave up. The worst part is that The UPS will not show up even in the Energy Saver preference pane.
    I checked if the USB connection is working OK on the UPS and it seems to work, although it reports itself as "Cypress Semiconductor Serial to USB" in the System profiler.
    Any ideas of what I could try to get this to work? As of now, it I am not around to shut down the machine, the battery backup is useless...

    I can't offer any real help here other than to say that the Belkin UPS does work with a Mac Pro. I was running one on my G5 and when I replaced that last week with a Mac Pro I simply plugged it in and it worked.
    I have never tried to use the Belkin software; I read somewhere on these forums I think that it's rubbish and because OS X supports UPS out of the box I have always relied on that.
    I am connected via USB. The Energy Saver UPS panel simply shows the UPS name as "UPS", and in System Profiler itsimply says "Belkin".
    BTW, I also have a Belkin UPS on my wife's iMac and it does exactly the same.
    I know they work because we have had power outs here and the UPS devices have kicked in just fine.
    I am guessing—but this is only a guess—that you may have some remnants of the Belkin software still on your system and that this may be interfering with Energy Saver. I would maybe try to do a finder search (apple+F from the desktop) for "Belkin" and see if that shows anything. Maybe ask Belkin what gets installed so you could check it's all gone?
    David

  • Using a Belkin UPS with Tiger 10.4.7

    I bought a Belkin UPS to protect the mac from power outages but their Bulldog Plus software doesn't detect the USB connection after the mac goes to sleep.
    So every day I have to restart the mac to keep the Bulldog's <UPS disconnect!> error message from interupting my work every minute. (And to communicate with the UPS in the event of a power failure)
    Does anyone here use the System Preferences>Energy Saver>UPS option to control the shutdown process in the event of power failure? Does it work?
    Belkin support for macs is sketchy at best. Is all this restarting bad for the iMac?
    iMAC G4 1 GHz 1024mb   Mac OS X (10.4.7)  

    There are some good threads on UPS over in the G5 Forum, and a couple people who use Belkin.
    You should be able to use Energy Saver AND Bulldog software (latest version?)
    Found that one Quad on APS RS1500 really needed to use PowerChute (1.3.3) along with native support built into Tiger to work in all situations.
    I don't need PowerChute for my MDD to recognize that it is on a UPS. Because I have more backup power than needed (have an extra battery power pack add-on that offers 2-3 hrs runtime) I've never gotten to the point where it was forced into shutdown.

  • InDesign crashes every time you double click to open an .indd file on Windows system

    InDesign crashes every single time you double click to open an InDesign file and has done so since replacement of the original version of InDesign introduced in the Creative Cloud launch.  Does anyone else have this problem?  I'd say it was unique to my system if I hadn't experienced the issue repeatedly on several different systems now.  You have to relaunch InDesign which then opens the file from recovery, so it saw the file you tried to launch in the first place.  This leads me to believe the problem lies with the file association registry of InDesign inside Windows systems.  I find it unbelievable that this problem still exists and remains unreported and that a solution hasn't been implemented by Adobe to rectify the issue.
    The double click is a fundamental tenant of opening files on a Windows system in the same way a single click is on a Mac.  Does InDesign crash ever time a Mac user clicks to open their files, I think not.
    Anyone got any ideas other than the obvious which is Adobe actually got their figure out and fixed it.
    Cheers,
    Pat Doyle

    Hi Michael,
    I'll give it a go.  Don't really like messing with the registry on Windows boxes.  Yes you can do it, but it can end up being a case of the operation was a success, but the patient died.
    Just was rather hoping someone else had already experienced this problem and posted the registry tweak.  Didn't want spend hours reinventing the wheel.  Not because I'm lazy, but I have so many demands on my time that resolving a minor issue that effects me only seems like it should be pretty low priority.
    The system I'm using is brand new, but the problem seems to have followed me regardless which may indicate that it is seated in my synchronization information somehow.  Really don't know how that could happen as I'm not an Adobe engineer or have the remotest idea where to even start looking.  So I think I'll mark your suggestion as the "Answer" and just learn to live with it.
    Windows eh! Can't live with - can't live without it.  I'm sure Mac can be just as temperamental. Just have to chalk this one up as being just another ghost in the machine.
    Thanks for all the advice you have kindly offered, much appreciated.
    Cheers,
    Pat Doyle

  • P45 Neo3-FR Freezing/lock ups in Windows

    Specs:
    P45 Neo3-FR using 1.3 BIOS
    E8400 w/ Thermalright Ultra 120 Extreme
    2x1GB GSkill 1066Mhz RAM
    EVGA 8800GT 512MB
    Cosair HX520W PSU
    Antec Nine Hundred case
    2x SATA HDD
    1x DVDRW
    Windows XP SP3
    I'm having random freezing/lock ups in Windows.  It can happen anywhere between 1 minute to 5+ hours.  It's completely random, doesn't matter what I'm doing.
    I have the latest chipset and nVidia drivers.
    Memtest passes 8+ hours
    Orthos passes 3+ hours
    I've cleared the CMOS and loaded optimized defaults
    I've tried both IDE and AHCI
    What happens is everything just freezes, I can't move the mouse and can't ctrl-alt-del.
    Anyone have any ideas?
    Update:  I switched to BIOS 1.2 and so far everything seems OK, though I lost the option to change the command rate on the RAM.  I'll post back in a couple of days or if it happens to lock up again.

    Quote
    2x1GB GSkill 1066Mhz RAM
    Reduce memory clock speed to 800 MHz in BIOS, set Memory voltage to 1.9-1.95V and retest.

  • NO java control panel in windows system control window

    Hello together,
    there seems to be a bug/feature (?) not allowing me to use the plugin functionality of my J2EEsdk-1_4
    Situation:
    Before i installed the J2EE i had an already installed java plug-in 1_4_2 working fine on
    my Laptop giving my ms explorer 6.0 the Java VM needed. To avoid conflicts, i deinstalled
    this plug-in, before i installed the J2EE 1_4_2. The result was disapointing.
    There was NO java control panel in the windows2000 system control window after installing J2EE.
    There was no corresponding registration key in the registry anymore.
    Additionally there was no java related entrance to be seen anymore in the advanced internet and
    security options of my ms explorer 6.0.
    i have have found several trouble reports mentioned similar problems during the last months but unluckily
    no solution working for me.
    i did several tests with different java packages i downloaded today to get the actual versions
    First:
    i deinstalled the J2EE (not to get version conflicts) and installed the Java Plug-in 1.4.2 again.
    This was proposed from ms explorer, when i tried to open an internet page with javaplugins included.
    This plugin worked fine again. I could see and use the java panel and it enabled
    my explorer to use the java plugin.
    Second:
    i deinstalled the Java Plugin and installed the J2sdk_1_4_2 instead.
    The java plugin which is part of this package also worked fine.
    Third:
    i deinstalled the J2sdk_1_4_2 and installed the J2EEsdk-1_4-windows.exe.
    the same misbehaviour as mentioned before. No java panel icon can be seen
    in the windows system control, now registration......
    as a workaround i have installed now both, the J2eesdk (i want to learn about)
    and some additonal 100 MB java plug-in to enable my MS explorer to display
    java applets again.
    This is working fine again, but i really would prefer to have no need for two JREs.
    By the way:
    When i first opened the java control panel of the Plug-in and deactivated the update
    mechanism , this plugin got really angry immedialtely afterwards. As a result my
    laptop rebooted without coming up again. i had to initiate another hard reboot to get
    windows back
    i really would like to know , whats wrong me or the J2ee and i apriciate
    any hint.
    Best regards: yours aspirant

    One thing you could do if you by all means want to have only one single copy of 1.4.2 on your system is to install standalone J2SE 1.4.2 (this will accomodate your Java console and browser plugin requirements) and then install Application Server only distribution (on the download page this is referred to as "Sun Java System Application Server Platform Edition 8") and sample applications set ("J2EE 1.4 SDK Samples "). In this way you get full content you would get in J2EE 1.4 SDK and all the benefits of standalone J2SE 1.4.2 installation.
    This is obviously more convoluted at installation time since there are 3 separate things to install, but it would seem to fit your requirements.
    Hope this helps...

  • Trying to Create a Catalog file using WSIM (Windows System Image Manager)

    I have been looking online for a solution to htis problem for days and come up with nothing so any help would be amazingly helpful.
    I have created a Windows 8.1 image which I would like to role out to all users within my company but when trying to create a catalog file I am getting an erorr message saying "Windows SIM was unable to generate a catalog."  It says "Mounting
    Windows Image file......This might take a few minutes" and then fails after 6-7mins.
    When opening the log file I get this:
    10:00 : Cannot obtain read/write access for F:\sources\install.wim.
    In order to generate a catalog file, you must have read/write access to the Windows image file and its containing folder.
    10:13 :
    10:13 : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows OPK or Windows AIK User's Guide.
    10:13 :
    10:13 : System.InvalidOperationException: The operation failed to complete. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: String reference not set to
    an instance of a String.
    Parameter name: source
       at System.Globalization.CompareInfo.IsPrefix(String source, String prefix, CompareOptions options)
       at ?A0xfe36268f.ConvertToNtPath(String path)
       at Microsoft.ComponentStudio.ComponentPlatformInterface.CbsSessionAdaptor..ctor(String bootDrive, String imageWinDir, String servicingPath)
       at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl.InitializePackages()
       at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl..ctor(OfflineImageInfo imageInfo)
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
       at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
       at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.PlatformImplementation.CreateOfflineImageInstance(OfflineImageInfo imageInfo)
       --- End of inner exception stack trace ---
    The one image that did work (LiteTouchPE_x64.wim) was from the OS I imported to Microsoft Workbench but the components are different to any that I have seen online when looking on how to do this.
    I have made sure that the architecture is x64 and tried from ISO files I have on the system already but get the same error.
    This is the first project I have been involved in and only ever done IT support before this.
    Thanks for your help in advance.

    Yes I am trying to capture a reference image that I have created on another machine and then reploy this through MDT. I am trying to open the Unattend.xml file because the "Capture and Sysprep" fails on the reference machine when trying to run
    Sysprep. When I try to open the Unattend.xml file in MDT I get the error below:
    Performing operation "generate" on Target "Catalog".
    Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim" 1 > "C:\Users\*****\AppData\Local\Temp\3\Microsoft.BDD.Catalog.log"
    2>&1
    No existing catalog file found.
    PROGRESS: 0: Starting.
    PROGRESS: 0: Creating mount folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_Windows 8.1 Enterprise_njegg3ph.con.
    PROGRESS: 5: Creating temp folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_temp_qj0x3ga5.obv.
    PROGRESS: 10: Mounting Windows image: D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim. This might take a few minutes.
    ERROR: Unable to generate catalog on D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim: System.ComponentModel.Win32Exception: The process cannot access the file because it is being used by another process
       at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
       at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
       at Microsoft.BDD.Catalog.Program.DoCatalog()
    Non-zero return code from catalog utility, rc = 2002

  • How can I install photoshop elements on a 64 bit windows system?

    How can I install photoshop elements on a 64 bit windows system?

    You just use the appropriate install disk/ download. See this:
    Install Premiere Elements, Photoshop Elements
    Or are you asking about some specific procedures?
    Mylenium

  • System.ArithmeticException by Windows.System.Display.DisplayRequest.RequestRelease()

    Could anyone shed some light on whey Windows.System.Display.DisplayRequest.RequestRelease()
    occasionally throws System.ArithmeticException?
    The error message is: Overflow or underflow in the arithmetic operation.
    Hong

    Hello,
    I think we will need a lot more information to be able to really help you. A dump file would be a good place to start.
    That said my first guess is that the internal reference counter is underflowing because you have more releases than requests. I would start by instrumenting your code and making sure you have exactly the same number of requests as you do releases.
    I hope this helps,
    James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

  • Error while integrating Windows System - Share into KM

    Hi Experts,
    I am new to KM and there is a requirement of Integrating Windows System into KM.
    Portal System : a.xyz.com
    Remote System: b.xyz.com
    Share -
    b.xyz.com\d_share$
    Both systems reside in the same domain and share is created on the remote system which needs to be accessed from Portal. User xyz\Rob has given R/W access to the share.
    The steps I followed are:
    1. Created a Network Path.
        - Specified Network Path as given above.
        - Added credentials for xyz\Rob
    2. Created Windows System in KM Systems Landscape.
    3. Created File System Repository.
        - Specified Share as Root Direcory.
        - Specified Windows Landscape System as the system defined in the above step.
        - Security Manger as W2kSecurityManager
    Now when I saved it, default trace logs are giving following dump :
    #1.5 #000E0CB1BAAE005E0000000E000017F000046821B68B46BA#1240393912559#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Error mounting drive ,path \\\\b.xyz.com\\d_share$#
    #1.5 #000E0CB1BAAE005E0000000F000017F000046821B68B617E#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration (New path) failed to mount network path \\\\b.xyz.com\\d_share$ - com.sapportals.wcm.service.fsmount.RemoteAccessException:  Error Mounting Drive: \\\\b.xyz.com\\d_share$
         at com.sapportals.wcm.service.fsmount.FSMountService.mountDrive(FSMountService.java:91)
         at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:346)
         at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
         at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
         at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
         at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
         at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
         at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
         at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
         at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
         at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
         at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
    #1.5 #000E0CB1BAAE005E00000010000017F000046821B68B6F1C#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration failed to get configuration of network path CaesarNetworkPath - com.sapportals.wcm.service.fsmount.RemoteAccessException:
         at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:351)
         at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
         at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
         at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
         at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
         at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
         at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
         at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
         at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
         at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
         at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
    #1.5 #000E0CB1BAAE005E00000011000017F000046821B68B72C8#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration Failed to get configuration on network paths to mount - com.sapportals.wcm.service.fsmount.RemoteAccessException:
         at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:359)
         at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
         at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
         at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
         at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
         at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
         at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
         at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
         at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
         at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
         at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
         at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
    I have gone through the help.sap.com documentation but I found it quite confusing.
    Please suggest.
    Br,
    Nilz

    Hi,
    Check whether you are able to access the same file share form the Portal server where your J2EE is installed.
    And also if you have used
    b.xyz.com
    d_share in the network path try using //b.xyz.com/d_share in the network path as mentioned here.
    https://www.sdn.sap.com/irj/scn/thread?messageID=1283643
    Regards
    ~Hussain

  • How do I permanently delete music files from itunes AND my  computer (without going to the folder to delete each item)? It's a windows system. I've tried 'reset all dialogue warnings' as I've been told to do but no luck. Files are still in Itunes folders.

    How do I permanently delete music files from itunes AND my  computer (without going to the folder to delete each item)? It's a windows system. I've tried 'reset all dialogue warnings' as I've been told to do but no luck. Files are still in Itunes folders. I would really appreciate help!

    Solved! Music was in Itunes folder but not in Media folder within that. It doesn't seem like a very user friendly system so far!

  • In windows system events observed below bugcheck at the time of restart. Error _02/08/2015 11:27:58 _BugCheck _none _0x00000050 (0xfffff8a01cba4000, 0x0000000000000000, 0x... _1001

    In windows system events observed below bugcheck at the time of restart.

    Hi,
    It seems to be a system crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Unfortunately, it is not effective for us to debug the crash dump file here in the forum. I would like to suggest that you contact Microsoft
    Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request please take a look at the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How to install forms 6i runtime using windows Systems Management Server?

    Hi,
    Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
    How to install oracle forms 6i and reports 6i runtime in multiple client machines
    using windows systems management server instead of installing one by one manually.
    Regards

    Here is a quick summary on why this works...
    The Problem:
    The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
    Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
    on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
    The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
    is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
    Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
    The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
    file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

  • I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

    I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

    Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

  • Search help - window system type

    When clicking on a search help button, in the ABAP WebDynpro application, the user has the following error:
    "Sending of dynpro SAPLSZA1 0201 not possible: No window system type specified".
    Please, what could be causing this error?
    Thanks

    Hi Hari,
    not yet.
    I am sending for QAS the configuration with the Search help KRED_C, and lets see what happens.
    What I think is that there is some EXIT implementation in one of the underlying Search Helps of the KRED, once it is a Collective Search Help.
    As I found in the SDN, "Search help exits containing dynpro-specific functions, for example, CALL SCREEN, are not supported.".
    see http://help.sap.com/saphelp_nw04s/helpdata/en/47/9f724642314aabe10000000a42189b/content.htm
    I hope it helps.
    Regards.

Maybe you are looking for