Belkin YourType Wireless Keypad won't connect

Belkin YourType WIRELESS KEYPAD (2015)
Mac Pro 1.1
Lion 10.7.5
Apple Wireless Keyboard/Magic Trackpad
I have just purchased Belkin's wireless keypad but can't complete the pairing process.
The device is recognised but I am unable to enter the displayed passcode as the keypad won't respond to any keystrokes. When pairing my wireless keyboard, the first passcode number was highlighted but the Keypad's passcode display does not show this. I have tried using 'Passcode Options' route, entering the passcode using the Wireless keyboard, without any success. I've tried the numbers lock but as keypad in responding at all I'm unsure what state the keypad is in. I've tried rebooting computer, re-inserting batteries... also holding power button untill passcode stage of pairing (which I used successfully when pairing Apple wireless keyboard).
Any other work-around suggestions?
Thanks

Thanks Barry.
I have contacted Belkin as you suggested, but after trying various combinations to connect I got the same result. The Belkin tech concluded the unit itself was faulty. I have exchanged it for another keypad at the Apple store but I'm getting the exact same problem.
Just to clarify what I am experiencing when trying to connect.
The pairing screen shown in Belkin's user instruction has a 'Pair' button which when clicked on will make the connection without the need for a passcode. My setup is different in that it does request a Passcode. When pairing Apple's Wireless Keyboard I was able to activate the code successfully, but with the Keypad the Passcode page seems inactive with all buttons greyed out - although by pressing the 'enter' key it takes me to the previous 'search for device' page.
The Keypad is the perfect addition to my studio setup, but perhaps it is not compatible with my setup.
Has anyone been successful in hooking up to a Mac Pro 1.1 OS X 10.7.5?
Le Batch

Similar Messages

My Apple wireless keyboard won't connect to my Mac mini any more.

My Apple wireless keyboard won't connect to my Mac mini any more. Going through the Bluetooth Setup Assistant doesn't help - the computer finds the keyboard, but when I type in the pass code it fails to pair with it. The green LED on the bottom of the keyboard flashes twice at roughly two-second intervals. I've tried replacing the batteries and this has had no effect. I have all the latest software updates installed.

Welcome Cheirhandrea!
There are easily hundreds of variants of the iMac dating back to 1998. Many of the pre-2006 iMacs this forum covers cannot support an Apple wireles keyboard. Because this model has been in production for so long, it is important for you to let us know as much about your computer as possible so someone won't give you information that may not be appropriate to your iMac variant.
So we need to know:
1) Your processor type and Mac OSX version, both available by doing "About this Mac" from your Apple menu at the left end of the menu bar:
2) The make and model of the keyboard.
I asked for your Mac OS version because "iOS" as currently shown in your equipment profile cannot run on any Mac computer, only Apple's mobile devices. Once you get the OS version from "About this Mac," please change your profile to avoid further confusion and get help faster without the delay of someone having to ask for clarification before they can start helping.

Wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

Wireless keyboard won't connect to mac mini at start-up: what do I do?

My new wireless keyboard won't connect to my new mac mini: what do I need to do?

do you have a normal usb keyboard & mouse too?
have you gone through these steps?
http://support.apple.com/kb/TS3048
of course you need a working mouse to go through these steps....i think everyone should keep a usb set on hand to resolve these kinds of issues.....

Wireless NIC won't connect at N - stuck at 54mbps

I have an Acer Aspire, V3-771
The wireless card is an Atheros AR5BWB22
My router is broadcasting at 300MBPS (802.11 N) yet my connection is stuck at 54 MBPS. I have had problems with this NIC since the first time I started this laptop, it frequently won't connect to trusted networks and then after 5-10 minutes it will eventually connect. But now I am stuck and before I go out and buy an adapter that supports N or just change the internal network card I was wondering if anyone knows how I can possibly fix this?
If I go to network and sharing center then click on status of my connection it says connected at 54mbps. If I go to "Network settings">"Advanced options" it says under properties: SSID: myssid, Protocol: 802.11n
So if I am connected at N, why is the connection still only 54mbps? Any fix for this? I did go in to my router and make sure that it's broadcasting at 300mbps yet I am not getting anywhere near that... even 150mbps would be better. What gives? Is it the card? Thanks in advance!
Running Windows 10 home.

Maybe this makes no sense to you but try to disable IPv6, both on yout NIC and on your router. Reboot both devices and report here what happend.

Apple Wireless Keyboard won't connect under Windows

Hi there,
I've installed XP on my MacBook Pro via BootCamp, but my wireless keyboard & mouse won't connect. XP asks about pairing verification number, and I didn't found the number. Where can I find the number?
Thanks

Hello:
It sounds like a Microsoft issue. Why not see if the great cloud in the sky in Washington has an answer - perhaps on their web site. The reason lies somewhere in the Windows system, I suspect.
Also, are there drivers that need to be installed in Windows (as you know, on a Mac they are plug and play)?
Additionally, here are a bunch of FAQ's that may be helpful:
http://docs.info.apple.com/article.html?artnum=303572
Barry

HT3624 I am in a campground and my wireless internet won't connect on my MacBook Pro. Help

I am in a campground and I can't get the wireless internet to work it worked before now it doesn't. I think
I did something and messed it up. I was in the network area of system profiler and it was on
air port and I hit the - at the bottom and it went away when I put it back it hasn't worked
since. Help!

I was in a hotel a few month a ago. The hotel also had a portal page you have to sign in. Of course the ATV didn't a web browser and could not sign in to the portal and connect to the Internet, so your iTunes didn't work. (But your ATV should be connected to the router at that point already, just the portal won't open the port to pass through your ATV's traffic)
So what I did was to use AirVideo app on my iPad and AirVideo server on my Mac. Selected the movie on my iPad using the AirVideo app and then selected my AirPlay device on my iPad to AppleTV. Because this setup didn't require iTunes, so there was no need for a live Internet connection, and just a connection to the hotel router was enough. It was very easy.
(Of course, you can subsititude the iPad with an iPhone here too)

All non-Apple Wireless Clients won't Connect to Time Capsule

I have a latest gen Apple 2TB TC (ME177LL/A) and have had it for about 14 months. I have never had any issue with it in the past and have perhaps only had to reset it twice in that 14 month span.
Came home from work last night to watch some Netflix on my PS4, and noticed my PS4 couldn't connect to the network. In the PS4 OS I kept getting errors that said either the network no longer existed or my password was incorrect. I simply tried to re-enter my password multiple times, but only once was the PS4 successfully able to connect. The one time it did connect the network speed indicated in the PS4 speed test was less than 200 kpbs. Within moments, the PS4 lost connection again. I was unable to reconnect.
At this point I figured I would just use the PS3 instead...same issue, however. Initially thought it was perhaps a PSN issue, but this time I never once could get the PS3 to connect. It repeatedly just said the network wasn't available or the password was incorrect. Went through the same troubleshooting steps that I did on the PS4 with no luck.
At this point I realized my Lyric thermostat had been erroring out and giving me a notification on my phone---the app on my phone wasn't able to connect to the Lyric via Wifi. Also noticed my August Connect was flashing red and was not connected. DirecTV Genie was not connected to my TC network either. Then went to my home office to discover my Slingbox was no longer connected either. Interestingly enough, though, my iPhone, MacBook Pro, Mac Mini, wife's iPhone, and MacBook all were still connected to my TC network with no issues. I performed speed tests on all of them and all were giving me well over my 60 Gbps Internet speeds. These devices never disconnected nor had any hiccups.
Essentially determined all my non-Apple devices couldn't stay connected to the TC network.
Proceeded to just reset the TC and see what would happen. None of the non-Apple devices could connect. Same "Network not found/incorrect password"
Then proceeded to perform factory reset on TC. At the same time I unplugged my Charter internet modem from power and cat5 out. Powered on modem, waited. Then powered up TC. I did this process twice through, once with auto selected 2.4/5 Ghz channels--still had issue with devices being unable to connect. The second time through, I set up the 2.4/5 Ghz bases upon the most "open" channels as shown by iStumblr (I live in fairly large luxury apartment building that has many networks -- so there are A LOT of networks).
This time I appeared to have success. One-by-one I was able to connect all my non-Apple devices to this new network with the new SSID and credentials. All devices were able to connect and the PS3/PS4 were able to connect to PSN and I was very easily able to get Netflix.
Woke up this morning and noticed all non-Apple devices were once again not connected....really not sure what's going on. Didn't have time to dive in deeper before heading to work.
Just as an FYI, I have 2 different Macs backing up to the TC via Time Machine wirelessly (the primary reason I have a TC and not another router). Also have an Asustor AS5008T connected to the TC via round robin link aggregation. All Macs are running Yosemite. All iPhones are running iOS 8.3. Offhand, I don't know the firmware the TC is running. I made no recent changes to the network or any of the hardware.
Anybody have any idea what could be the culprit? Any help would be greatly appreciated.

Whilst I said in my first post that apple had removed all the logs.. you can still get them via PC version 5 airport utility... you will need to plug in via ethernet since wireless is not working. You can also install v5 utility into a Mac but I cannot tell you how. Google it.
The other method.. and I am not at all sure if it is useful or not.
Using the airport utility in an ipad.. click on the TC, then edit.. then advanced.. Diagnostics and Usage Data.
Go into this and you will see the Airport utility has got a stack of info out of the TC..(for secret transmission to apple).
eg
I guess it is comparison between normal functionality and when it fails that will show something interesting.. meaning you will need to track the info... and it is not so easy to get it out other than as a screenshot..

Netgear wireless router won't connect to my HP Pavilion via ethernet cable

I had bought the Netgear LT wireless router for my home and I cannot get my Pavilion PC to connect via the ethernet cable. All of our tablets will connect wirelessly as well as my laptop. The laptop will also connect using the ethernet cable. I had used a wireless broadband card on my PC for that last several years without a problem, now I can't seem to connect to the internet with this new tool. When I do try to connect, a pop-up screen appears with suggestions of using the connections from the past (ie. dial-up, broadband, mobil), but does not show an option for this new router.
Someone had suggest that I may need to get an updated driver for the ehternet card, and if so, how to I get said updated driver to instal over to my PC without being connected to the internet? I've tried to reconfigure and add a "new network" connection without any luck and have uninstalled the old programs pertaining to the old connection devices.
As of now, I'm having to download my business materials on my laptop, then transfer the files to the PC via thumb drives. I'm sure I'm just overlooking something rather simple, as it is usually the case for most, I imagine. Can anyone give me another alternative to fix this issue? I plan on leaving the PC connected to the router via ethernet, while using the wireless WiFi for the other devices.
Thank you in advance!!

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance. Additionally, what operating system are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Going from wired BEFSR41to wireless WRT54G, won't connect

I am trying to install a new wireless router (WRT54G) and removing my existing wired router (BEFSR41). However, I have followed the connection instructions and it does not recognize the router (not connected).
Also, I have Vonage VOIP router (RTP300-VD) and I tried to connect the network without connecting this router.
What's the proper way of replacing this wired router to wireless?
Please advise. Thanks.

HI,
can you post a few more details , such as which is your main router that's hooked direct to the modem ? and also the IP of the VOIP router.

Second wireless pc won't connect to the internet

Hi. I have two pc's and two game consoles. Everything connects to the internet except my second wireless laptop. I checked some previous questions and found one with my exact problem and went through all the troubleshooting and still can't connect.
My router has the green internet light, my wireless network is connected, I can connect to the internet on my first laptop but not on the second one. It was working fine yesterday and has been for the last 8 months. HELP! Thank you.

I have exact similar issue. In my case the laptop gets connected to the wifi but no websites open. Even phone does not connect.
Can you point me to the tread which had this issue ?

HP Desktop F4500 Wireless Printer Won't Connect to Router!

So Here's the Diagnostic Test:
Wireless On: Pass
Wireless Working: Pass
Network Name (SSID) Found: Fail
Security: Pass
Connected: Not Run
Signal Strength: Not Run
Other networks detected matching your network name (SSID): Not run
Wireless Networks Detected: 11
Downlink count: 0
Channel: Not Run
My Router is a Verizon Fios Router and when i press and hold the "Wi-fi Protected Setup" Button, the printer doesn't automatically find the network or signal or whatever it should connect to and the wireless light on the printer does not light up unless it is pressed.
--3 sheets were printed when i was setting up the printer at first, I don't know what buttons I pressed to do this but the three papers are labeled on top as:
1.)"Hp Network Configuration Page"
2.)"Wireless Network Test Report"
3.)"Number of 802.11 networks discovered: 11"
--Not printed in that specific order though.
I need help please!!

First, WEP is not in the least secure. Also, it will not work with Wifi Protected Setup (WPS).
Change WEP to WPA or WPA2, create a passphrase that is at least 13 characters, numbers and letters, upper and lower case and try again. Of course, all of your wireless devices will have to re-login to the wireless network after you change it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Microsoft Wireless Display won't connect

I just received my HP Spectre x360 Convertible 13 and can not get it to connect to my Microsoft Wireless Display Adapter. Both are brand new. The Spectre sees the adapter, but it errors when it tries to connect.
This question was solved.
View Solution.

Both are the exact same model. I tried connecting at work yesterday to the one that had worked before and couldn't get it to work. I had to delete it and then readd it to get it to connect.

Have a flashing folder with a question mark on start-up but cannot hold option as wireless keyboard won't connect, how do I get it to connect if I cannot turn on the machine?

Hello all, I've registered here because I can't work out how to get my keyboard and mouse to connect.
The issue is that when I turn my mid-2010 iMac on it doesn't load up, but instead shows a flashing folder with a question mark. I've Googled this and have some idea how to fix it, the first step in all guides to fixing the problem states that you should hold the option key upon start-up. The problem I'm having is that I've just had to change the batteries on my keyboard and mouse and they are now not connecting. I can't see how to get the keyboard and mouse connected with the Mac stuck on the flashing folder screen, and I can't get the Mac past said screen without using the keyboard. Does anyone know how I can connect the two devices?
Thanks.

The flashing folder with the ? mark indicates that a bootable system can't be found. You'll need to borrow a wired keyboard so you can boot into the Recovery volume (boot with the Command + R keys held down). From there you can reinstall the system and try a normal reboot.

Won't Connect to Wireless Network

So I've set up a wireless network in our apartment (using a Belkin Wireless G router) and our two other Macs (G5 iMac and 17" Powerbook) have no problem connecting to it. However, my flat-panel iMac, though it can connect to other wireless networks, won't connect to ours. It asks for the password, I enter it, and then it just tells me there was an error trying to connect to the network. Any thoughts? Thanks!
flat-panel iMac, GL1, FCP3 Mac OS X (10.4.9)

Nothing out of the ordinary.
The exact type may hold the key to the issue though. Ensure that all the devices in your wireless network are using the same type. Older devices may not support WPA but if possible you should use WPA throughout. If you are using WEP then you should set a password that is 13digits long for 128bit encryption and 5 digits long for 40bit encryption.<p<p>> Yeah, I just finished updating everything.
Have you lost the ability to connect since the updates? And if so what day/date did you upgrade?
cheers
mrtotes

Belkin YourType Wireless Keypad won't connect

Similar Messages

Maybe you are looking for