Belle firmware for N8-00 - slower, worst... sucks

I have been updated F/W to Belle OS in my N8-00. I can't believe what Nokia did. My observations:
- slower operation (ex. switching screens),
- random and spontaneous restarts after sending SMS,
- SMS keyboard (vertical mode) is sucks,
- worst access to emoticons and symbols when writing SMS,
- drop-down list (connection/date/time) is sucks,
- etc.
Quo vadis Nokia?
BR,
mikelflogic

Your list:
- slower operation (ex. switching screens),
- random and spontaneous restarts after sending SMS,
- SMS keyboard (vertical mode) is sucks,
- worst access to emoticons and symbols when writing SMS,
- drop-down list (connection/date/time) is sucks,
I had similar problems after updating an N8 to Belle.  I decided (based on feedback from Nokia Care) that it needed to be brought back to Nokia to have everything installed again as if it was new.  With nothing left to lose, I did a full backup, and then removed any programs that I suspected might be causing problems - especially the SPB data monitor utility. I figure I could always re-install the programs, which I'd have to do anyway if it went back to Nokia.  Anyway, doing this corrected the random restarts, and switching screens became butter-smooth.
The SMS vertical keyboard is what it is - it's nicer than the old Anna screen, but not as nice as the iphone screen.  After a few days of using it, it feels quite natural (to me).  It's a trade-off.  There is no "one size fits all".
Emoticons, drop down lists, and many other things that are missing....   if I only had one N8, and it was running Anna, I'd leave it alone, unless the features you'll be losing don't matter to you.  As it is, I've got two of the critters, and I'm leaving one alone with Anna (in case the problems don't get fixed), and am still using the Belle phone for daily use.  For someone who doesn't use all the high-tech stuff the N8 is capable of, I think Belle will make the N8 seem like a nicer phone.  You've just got to decide what matters most to you - form, or function.
You can skip towards the last page or so of this thread to see the full list of things we are hoping Nokia corrects:
/t5/Software-Updates/List-of-Belle-additions-corre​ctions-needed/td-p/1328167 

Similar Messages

  • Nokia UK too slow to release firmwares for sim fre...

    Why are Nokia UK being so slow in releasing a firmware for the UK sim free variant? I specifically bought an unbranded phone so I did not have to wait for a network branded update that may or may not happen. I read there is some customisation needed for the UK variant. What specifically is different? I mean the UK is one of the biggest markets for mobile phones, should we not be high on your priority list?
    Considering this is your flagship phone, I am pretty disappointed with support thus far. Also in case anyone is wondering I know this is a user to user forum, but I also know Nokia employees do post from time to time!

    Hi Recall,
    I don't work for Nokia so I can't comment on exactly whythey delay the release of firmware into the UK market but I do work in thehandset test industry and can explain the possible reason(s).  I'mactually writing this from my hotel in Brasilia where I'm testing a device notas 'complicated' as the N97 and this is still taking 2 weeks.
    I would like to point out that even the smallest changein software can have a big impact on the rest of the code so thorough testingis required.  We call this regression testing in the industry and with theN97 device being so feature and technology rich it can take time to testproperly.  Everything, and I mean everything has to be tested.  Togive you an idea you are looking at GSM, GPRS, EDGE, R99 and R5 testingincluding calls, SMS, MMS, EMS, Email, Contacts, Bluetooth.  incoming calls,outgoing calls, international calls, call forwarding, call barring then all theusability and product testing such as the GUI features and add-ons specific tothe N97.  Now I have some reservations with Nokia on the N97 as some ofthe failures we see on the device you would have thought would have been caughtduring this type of testing previously.  When you get customized versionsof code too, say Vodafone and the likes' all this needs done with that too.
    As you say the UK is a big market for Nokia but that alsomeans they need to be extra vigilant on the quality of their software as anymajor failure could have a huge cost impact for device recall/service etc forNokia.  However this is something you would have thought Nokia would haveplanned for during the release schedule of all their devices.
    The other point is they may have found a bug in the codewhich only is apparent in the UK (or on UK networks) which would mean thesoftware they released they done so as an interim solution to other countriesto address the list of issues and upgrades while working on a newer version tobe released which includes a fix for the UK failure. This is just hypotheticalbut I've seen it happen before.
    Sorry I've not answered you question with a direct answerbut it may help you, and others understand why we sometimes see such delays inthe release(s).  
    Message Edited by m1bxf on 22-Aug-2009 11:47 PM
    BR,
    Gavin Nesbitt
    http://geekhouse.dyndns.org

  • Need Firmware for N73

    I Need new Firmware for N73.

    18-Dec-2006
    04:36 PM
    davss wrote:
    My handset has been replaced twice in the past month due to:
    - dropping bluetooth connection with my Nokia GPS module
    - international roaming not working 'no access' message when trying to connect to foreign networks where 3G is available (where no 3G networks then 2G worked fine)
    - everything is slow
    - the latest replacement has got pretty cool software on it such as skype, msn etc. however, when tried to use it was asked to singn up for those services (£5 min pm). Since am getting 500MB free internet they say they can't turn it on on my tarif - what a riddiculous excuse!
    - now when swich off it hangs with white screen and have to take the battery out in order to be able to switch back on.
    I was complaining about my P910i when it froze once a year and yet still recovered after clicking OK button.
    This is the worst handset I've ever had! NOKIA = RUBBISH!
    They've rushed things because of K800i release and now are paying the price - learn your lesson but not on me. This is the last time am returning my handset and if you can't fix it - bye bye!
    I take it you are with 3. Did you return the handset to 3 or to Nokia? Just asking out of interest.Message Edited by thetargetarcher on 18-Dec-2006
    06:41 PM

  • Where can I download firmware for Actiontec MI424WR rev g

    The URL from Current Product Firmware Versions PDF document links don't have the latest firmware (30.18.5) for the rev G model.
    http://www2.verizon.net/micro/fios_router_update
    Where can I download the latest firmware?  Does Verizon still support this router?
    Thanks, Johnny

    I tried the Verizon update page, and found that it's a LOWER version than I already have!!! My router is version 4.0.16.1.56.0.10.14.4, but Verizon's version is 4.0.16.1.56.0.10.11.6
    I looked at firmware updates because my WiFi speed sucks (11Mb/s) even though I have an Excellent signal. When I do a Repair, it jumps up to 49Mb/s but in a few minutes it falls to 11Mb/s.
    I think I've tried everything mentioned in various forums, with zero difference. That lead me to believe that the ActionTec router is trash several months ago (hardwire connections are OK - Only WiFi is a problem).
    Oh - also I keep having disconnects every hour or so - it's plaged me for years, but it's too much hassle to change providers to something besiges FiOS. That makes it impossible to use Windows the copy command (even in /Z restartable mode) to transfer backup files (41 GB or so). I have to use Filezilla FTP, which has a Resume function that actually works.
    InSSIDer days that there are no strong signals nearby, just a few that have RSSI's in the high -80's and -90's. My RSSI is -49.

  • What is the current firmware for iphone 3g?

    What is the current firmware for iphone 3g?

    Dear Genes....    wjosten   /   Templeton Peck,
                             My iPhone 3G is on iOS 4.0.(8A293) and with Firmware  05.13.04. Since few days when I shifted  to New operator VODAFONE, I am troubling with "NO SERVICE" most of the time, but when I checked my SIM in another Mobile, it is working fine. So please tell me which iOS do i need to switch to and what will be my Firmware. As I own iPhone 3G, moving to iOS 4.2.1 is very slow.
    Please do suggest. Itz a lil Urgent.
    Looking Ahead to hear from you.
    Thanks in Advance....

  • Belle update for operator this March

    Hello,
    I think the update for this operators or appointed Nu it's for the month of March after the two posts of the forum and O2 Bouyegues. I also  hope that Orange and other operators
    copied from there forum
    Forum O2
    N8 Belle firmware update for O2 users - 4th March??
    Post by jrrsteve on Thu Feb 09, 2012 2:26 pm
    Hi,
    I have just been told by customer support (via 202) that the O2 Belle release date is the 4th of March. Seems a bit strange when other networks have already released it. Anybody else heard anything different?
    Forum Bouyegues
    Hello,
    The update validated by Bouygues released in Spring in March: to be confirmed, we're working on.
    As soon as it is available, you will be informed. Watch this space!
    Sincerely,
    H. Sebastian, Woobees Expert Bouygues Telecom
    sorry for my english
    Solved!
    Go to Solution.

    Hi cobrax5,
    Welcome to the Nokia Forums!
    Operator usually release the update when they feel it's ready to be pushed out to their customers. Therefore different operator's will have different release date for Belle.
    So even if your product code states that Belle is available for your device, you potentially will have to wait till your operator to authorise and send this out.
    We hope you receive your update soon!
    Thanks!
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Firmware for Nokia N70

    How do I go about updating the firmware for my Nokia N70 (Vodafone)?
    My current version is V5.0609.2.0.1 01-03-06 RM-84
    This is the second N70 I have had and they have both randomly dropped calls. After reading several threads on this forum I think it may be to do when it switches from 3G to GSM.
    Maybe a firmware upgrade may fix it.

    I have purchased the same N70 on 7-10-2007, and its version is also V 5.0705.3.0.1 30-01-07 RM-84 . when i fill memory card with images, mp3 songs, applications, etc, upto 300MB out of 1GB, it starts working very very slow. I need a help. Please Help me! it is working very slow like taking 1min. or more even to open main menu and other folder.

  • Belle update for Nokia C6-00

    Why Nokia is not giving Symbian Belle update for nokia C6-00 while Nokia 500 is running on same platform which is much cheaper than C6-00. I am using C6-00 from around 16 months and the software is really slow and it hangs multiple times in a day. Before purchasing this phone i suggest all friends to purchase nokia phones, at that time i was using nokia's low end phones but when i purchased this phone, it never gives me satisfation that i am using a smartphone. So i am making plan to move on to some other brand.
    Thanks and Regards
    Sumit Rana
    ( An unsatisfactory customer)

    Belle is not being released for any S60v5 devices, they don't have the necessary internal hardware to run it. The Nokia 500 was released running Anna and it does have the required hardware, it was also released long after the C6-00.
    Only S^3 and Symbian Anna devices can be updated to Nokia Belle. S60V5 devices are just too old, even the C6-00 which was released towards the end of that OS's life. 
    So if you really are unhappy about this then you really do need to switch to another brand. Before you switch you may want to look at that brands history for releasing updates, for example you'll find a lot of older android devices stuck on old versions too.
    There is nothing further that this forum or Nokia can do to help you with this.

  • Petition: Dual firmware, for both tag and file/folder supp

    Hi folks,
    The basis of this petition is for Creative to create a firmware for their larger disk Zen players that supports both file/folder based browsing AND tag based browsing.
    Similar to at least one of iRi'ver's players the idea is that this would be switchable, so you work in either mode (not both at the same time).
    Are you interested? If so sign it
    Edit: Just to make this a little clearer, I'm also advocating that when in the file/folder browsing mode the player acts as a USB mass storage device (a dri've letter). For tag based browsing of course a driver will be necessary.Message Edited by SSR on 0-2-2005 02:23 PM

    DM wrote:I'm not sure if the MTP versions work as a UMS as well, or if its strictly MTP.Hopefully I didn't confuse anyone here.... But I dont think its possible to get both MTP and UMS on one device using one storage media. It is however possible to have MTP and have a view on the player so that you can see ALL the files on it.
    My son has a (US) iRi'ver H0 which is MTP so maybe I can help clear this up.
    By default, the H0 boots into MTP mode (which requires WinXP + WMP0). It shows as a device in My Computer (not a dri've letter) and you can drag and drop music and/or data onto the device. When you use the player, you have a choice of browsing the music by the tag database (faster) or browsing through folders (slower).
    You can also boot the H0 in UMS mode (which does <EM>not</EM> require Win XP) by holding down a button while turning it on. In this mode, the player shows up as a dri've letter in My Computer. It's similar to the Removable Storage mode of the Micro, et. al., but you can also copy music (non-DRM) and you don't need to create a seperate partition. Now, if you were to stop there and disconnect the player as normal, you would only be able to browse through folders on the player (no database index has been created). However, you can download a free opensource utility to create the associated index files to allow you to browse the tag database also.
    So, in this regard, iRi'ver's solution is the best of both worlds. You can copy music (non-DRM) and/or data using either MTP or UMS and you can browse the player using either a tag database and/or folders.
    (So, in effect, I can use the H0 with Win2k even though the manual says WinXP is required)
    That being said, I prefer database browsing and have no desire to browse through folders on my Touch. But having more options is always a good thing
    /signed
    Message Edited by Igedit on 0-2-2005 09:30 PM

  • Need english firmware for Lenovo Ideatab A-3000-H quadcore

    Hello , 
    I cannot find Stock English firmware for Lenovo IDEATAB A-3000-H . I only found chinese firmware here.
    Cannot even find on support page.
    I tried installing google-apps but everything crashed too, gmail crashes , gtalk crashes , that sucks.
    Anyone have some success with A-3000-H?
    Thanks

    Hi svenjalell
    The Lenovo A3800-d is meant to be sold an used only in China.It's a China only model and as a consequence dosen't/won't have a official ROW (rest of the World) firmware.
    Chinese models are only in Chinese&English, don't have GAPPS/GMS(Google services like the Play Store/Not allowed in CN) and are full of Chinese apps.
    Unfortunately at the moment I'm not aware of a unofficial ''custom'' multilingual ROM/firmware for the A3800-D model.
    Also as far as I know the model is TD-SCDMA 3G/TD-LTE 4G = 3G/4G is meant to work only in CN with a certain local provider.That's why it's got the ''China Mobile'' logo on the back.
    I know this isn't the answer you were looking for but I haven't got a better one....
    ....Sorry.
    Regards.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Unable To Repair/Update Firmware for a Creative Nomad Jukebox

    Hello all,
    I've been trying for the past...3 or 4 hours to get my player to work, but it simply refuses to work =P. I sent the problem into Creative, but haven't gotten a response for a couple days now. So, here's a copy-paste of what I sent in that e-mail. If you can think of anything that might help, please don't hesitate to post! I really need your help on this one!
    My player's hard dri've recently died, and I received
    a replacement from the original store (a CompUSA).
    However, my Firmware for the device has failed. I
    tried the firmware upgrade for my Zen, but after
    a certain number of tries, I gave up. Here is the
    list of steps that I followed.
    On Zen: Click "Reload OS", let it run, it says
    run the firmware upgrader now.
    On Computer: "You cannot install this firmware
    update with your player's current drivers using
    the SB394 connector. To update your player's
    firmware, this application will temporarily
    replace the current drivers and restore them after
    the installation is complete. Continue
    installation?", I click Yes. Then it says to
    disconnect, and re-connect. I do it.
    It shows my version (.2.0), and I'm upgrading/
    repairing it to .2.02. When I click "Upgrade", a
    warning message pops up and says:
    "Your player cannot start up properly. Please
    reboot your player and run this application again.
    I've done this at least 0 times, and nothing changes. My player is a Nomad Jukebox Zen, the one with a FireWire connection, and like I said,
    I've tried this at least 0 times with the same results. Is there a process to completely remove
    the firmware on the device, then reinstall it,
    or to roll it back or something? Any other ideas
    to fix this problem is needed as well.

    Bump.

  • Can't find firmware for BEFW11S4 v2

    I'm having trouble finding a firware update for v2 of my BEFW11S4 router. The support page for this model offers a firmware update for v4 only. My current firmware v. is 1.45, which may be the latest version, but I can't seem to find this out anywhere on the Linksys website.
    The reason for the update is that my neew iPod 2G won't connect to the internet and I'm guessing an update might help.
    Thanks in advance for any assistance.

    You can Download 740 KB firmware for BEFW11S4 V2 and save it on the dekstop
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Help' tab- Then click on the 'Firmware Upgrade' .... Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

    After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

    There are only a couple of things you can do to resuscitate a nonresponsive Express:
    "Hard reset":
    Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    If that does not work,
    "Factory defaults reset":
    Unplug the Express from power.
    Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
    Release the button.
    In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
    Earlier versions of OS X will report it as "Apple Network nnnnnn".
    In either case, select it, and then launch AirPort Utility.
    If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

  • For when a new firmware for normal N73?

    I know there is a new firmware for N73ME, my question is, anybody knows when will be release a new firmware for normal N73, with same improvements like N73ME (or more).
    Message Edited by naf1970 on 16-Jan-2008 07:22 PM
    Nokia N8 / N9 / Lumia 920 White

    29-Feb-2008 06:26 PM
    1983 wrote:
    I think N73 wont get any more updates... The new line of candy bar nseries is the target now: N82 and N78, and the other N81, N95s and N96,
    N73 is almost as old as N80, and n80 isnt getting any new updates. Sorry.
    ur wrong
    Nokia 5800 XpressMusic (11) [Product ID: 0559416]
    V 21.0.025 (date: 02-04-2009)
    network: mobily (etihad etisalat)

  • We are desperately waiting for a new firmware for ...

    hello nokia,
    we are using one of your most popular mobile the n73- music edition ( product code for my mobile 0564012)
    as it is seen over the internet that nokia is rolling out firmware updates for their s60v3 devices like some of the e-series.., i just want to know if nokia will release a firmware for our mobile..??
    if not.., its our humble request to release one.., which can provide better performance and stability..
    most common complaint is regarding its speed..
    for eg while entering to menu the mobile becomes sluggish.. even if the phone memory is empty n no memory card is ther...
    i've nokia n8, 5230, e63 at present in my family n i'm a big fan of nokia n iu'll be glad to see your  reply soon..., n ofcourse the new firmware.... pplllllssssss   do the needful..,
    ignore mistakes if any..

    The N73 was long since discontinued. There will be no further firmware updates for that model.
    If you are unhappy about that you can complain to nokia using the "contact us" link near the top or bottom of this page.

Maybe you are looking for

  • Problem with built-in animation text presets

    Hi, I just started my first job with AE. I want to make a very simple thing: animate text (to be precise, just 3 short words) with one of the excellent built-in effects, which was shipped with the product. However I realized, that the final result of

  • Help need in creating DB objects programatically .

    Hi All, I have a case where i need to create a table in DB from ADF and need to insert/modify/delete their records in java code. Is that possible to create an update-able view object from java code rather going with conventional declarative steps in

  • Error In Production XI system URGENT

    Hi Experts, Its very URGENT. I have one problem in Production XI system. we have one interface which is running fine for india. In this they are using multi mapping to split the messages according to the company codes and are sending to the same FTP

  • WBS element creation error

    Hi All, I am trying to create WBS element using BAPI BAPI_BUS2054_CREATE_MULTI. The sequence is as follows: BAPI_PS_INITIALIZATION BAPI_BUS2054_CREATE_MULTI BAPI_PS_PRECOMMIT The error while creating element is : Final check of the project definition

  • Source system with human icon

    Hi Friends, I know this question is silly but here i am, new to BW and trying to learn something each day. In the source systems what is the source system with the human icon on it? If you can provide me links to documentation on that it would be gre