Belle: lack of full zoom on pictures

Hi,
There's one thing I didn't like at all on Nokia Belle.
On Symbian^3 and Anna, when a picture was displayed full screen, If I wanted to see the picture at half zoom, I just tapped twice the screen; if I wanted full zoom, I could pinch or use the volume keys to get full zoom.
On Anna, all I can get is half zoom. If I tried to increase the zoom level, the picture is shown at the higher zoom for a moment and then returns to half zoom. This is really annoying!
Best.

i never used that feature but have fun sorry to see you go.

Similar Messages

  • Fix a video that has been recorded in full zoom?

    Is there a way to zoom out during editing or de-pixelate? I must have zoomed in by accident while recording on a tripod. Half the video is fine, half is in full zoom and therefore poo. Is there any way to correct this through editing or something? Or, is the video irreparable like that?

    Short answer: no
    Only way to solve this is to redo the shoot.

  • Hi I got an iPad 3 for around 5 months ago and  I did not have any display problems... i bought it for reading books on iBooks and when I open PDF to read and when I full zoom in letters and words then it was so clear and no pixels were found but today

    Ok now when I zoom in iBooks in PDF then my pixels get a little weird and the text is not cripy and sharper like it was months ago.. And i was reading same pdf which I used before and when I go to safari and full zoom a very little pixels are not clear. pls help

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Okay...what happened to the full screen contact picture?

    Okay...what happened to the full screen contact picture? Is there a way to get it back? I'd like to see the full picture of the person I'm  calling-not just an ugly blank screen with little round circles on it!!!!

    I wrote my feedback there. Please everyone leave your feedback. The new 7.1 design is very impractical.
    Why they crave so much about these ugly circles? There are lots of unused space available on the screen.
    Please bring back the big rectangular buttons!!!!!!
    And full-screen contact picture when someone's calling.

  • Full screen contact picture

    Please go back to the full screen contact picture! I didn't know what was happening until I looked at this forum. Why would you change something that works fine?

    We are other users. If you want to communicate that to Apple as well, the following is a good place: http://www.apple.com/feedback/

  • I'm running OX 10.8 and my screen spontaneously jumps to a large zoomed in picture.

    I'm running OX 10.8 and quite often the view on my screen spontaneously jumps to a large zoomed in picture.  I don't know why it happens or how to get it back to normal.  It's not the "View - Zoom In/Out" that's the problem.  Might be in the mouse?

    You're welcome.
    "They both do it"
    Both exhibit this random zoom?
    Can you log into another user account on either machine and test this.

  • Zooming desktop pictures without "pixelating"?

    Greetings. I have a number of photos I downloaded that I want to use as desktop pictures. The photo size is 800 x 600 (pixels). The native screen resolution on my MacBook is 1280 x 800. When I set the picture in the "Desktop" system pref, I am not happy with the CENTERING option. But when I select the FILL SCREEN option the photos become all "pixelated" on the display (because, of course, they are not large enough to fill the screen at native resolution).
    Curiously though, when I set the same photos to display in the "Screen Saver" system pref, they zoom in WITHOUT ANY "PIXELATING!" Can anyone explain to me why the zoom effect in "Screen Saver" doesn't pixelate the photos, and is there anyway to tap into this zoom capability in the "Desktop" system pref to view smaller photos at full screen? Is there a third party utility that can do this?
    Thanks!

    Greetings. I found several "screen saver run as desktop picture" options (including a cool widget called "Desktopsaver Plus") that essentially accomplishes what I'm after.

  • Pan&Zoom in Picture-in-Picture; Zoomen&Schwenken mit Bild-in-Bild; Premiere Elements 13

    Hi,
    my question is:
    I want to have the Pan&Zoom-Effect (also known as Ken-Burns-Effect) in a smaller Picture in the bigger background Picture. Every time I'm using the Pan&Zoom- Tool the Picture-in-Picture Effect disappears and the smaller Picture becomes a full frame Picture.  Is it possible to have both effects in one Picture?
    Thanks for your Time and Support.
    Hallo,
    meine Frage lautet:
    Wie kann ich den Schwenk&Zoom-Effekt (Ken-Burns-Effekt) in einem Bild-in Bild Effekt anwenden? Sobald ich Schwenk&Zoomen auf ein Bild-im-Bild anwende wird es zu einem Vollbild und der eigentliche Hintergrund ist nicht mehr zu sehen..  Ist es möglich mit Adobe Premiere Elements 13?
    Vielen Dank für Ihre Zeit und Hilfe.

    Here are two ways in the Expert mode in the pse 11 Editor:
    (it works pretty much like pse 8, except the Tool Options are at the bottom of the workspace in pse 11)
    1. Use the Custom Shape Tool and in the drop-down choose the Arrows set
    Set the options for the Shape Tool to Line and use the options in the tool options bar.

  • 'Full Screen' view picture breaking up or pixelating? Any suggestions as to why this may be happening?

    When switching to 'Full Screen' view I'm finding the picture breaks up and/or pixelates? Any suggestions as to why this may be happening?

    Tony,
    The images are are all in the range 8-14 mpixels. File sizes are ca. 5MB and ca.12MB for RAW images. I'm not sure whether RAW images are giving this break-up of the Full Screen view or purely JPEGs. I will look into this when the problem recurrs.
    I'm certain the problem is not occurring due to zooming, but is apparent with normal, but edited images when I switch to Full Screen. It is an intermittent problem. When it occurrs shutting down A3 and restarting does not seem to resolve the problem, but I believe rebooting my iMac does - at least for a while.
    As a relatively new user I'm afraid I don't really follow your Point 2. In A3 Preferences, the Previews are set to "half size". Are the Master Images not just the unedited version of the photo in Split View that I am looking to view in Full Screen?
    Certainly, if/when this problem recurrs I will try pressing M in Split View, and then viewing the Master Image in Full Screen to see if the problem disappears. However, I don't really want to view the original image, but the edited image.
    Apologies if my responses are rather simplistic, but any further suggestions would be welcome
    Alan

  • Full screen contact picture lost iPhone 6 plus

    upgraded my iphone 5 to ios8 and i was so pleased to see the return of fullscreen contact pictures for incoming calls. After getting an iphone 6+ today I am disappointed to see this return to the small round picture at the top of the screen. Am I missing a setting somewhere?

    Hello everyone. No one is missing a setting or need to do a bodoo ritual to get a full sized photo on incoming call in an iphone. The answer is simple since the phone in his original position has an aspect radio of 9:16 to the phone display a picture in full screen at the incoming call the picture needs to be in the same aspect ratio so there is no blank spaces anywhere and the software proceed to display the contact picture.  Also the picture has to stay in your library.
    The procedure to do this in iOS 8:
    1- Go to Photos>Camera Roll> Select the picture you wanna set as contact.
    2- Touch "Edit" in the right superior corner.
    3- Inside Edit mode touch the tool to resize.
    4- Set the grid to a position taller than wide.
    5- Touch the scale icon in the lower right corner of the screen. Is the one above the "Done" button.
    6- Select the last option that reads: "9:16" that is related to the aspect ratio for the selected area.
    7- Adjust your image zooming or moving until it reach the desired one.
    8- Hit done.
    9- Now in Camera Roll set the image to the contact desired. It's done.
    Enjoy.

  • Who do I complain to regarding an Apple iPhone upgrade that has taken my my full screen contact picture and turned it into a tiny circle that is hard to see at a glance!!!

    I'm trying to find an outlet for the frustration I feel regarding the "upgrade" that replaced my full screen picture for my contact numbers to a tiny, little dot in the right hand corner.  Are they going to give us an option to go back or did someone  just need to justify their job by making  changes??

    Apple.com/feedback

  • LACK OF FULL PEN TOOL FUNCTIONALITY WHEN CREATING A SHAPE LAYER

    Hello, I'm going through Chris Meyer's video course on being an AE apprentice and have spent over an hour on the following issue.
    Here is what I know.
    I know I am trying to create a shape layer, not a mask, to create a frame to surround the video of the green field on the attached screenshot.  Therefore, I pressed "F2" to make sure I am doing so.
    I want to define the borders of this picture frame by using the pen tool to draw a path on the layer entitled "Windy Peak".
    I have highlighted that layer in my timeline.
    This video was pasted on to a placeholder shape that I had created using Command Option "/" on my Mac.
    I do have limited use of the pen tool, because it displays properly when I hover it above the borders of the video to be framed.
    But I lack access to the toolbar controls I want to complete my assignment.
    For example, I would like to create a gradient to define the internal coloration of this frame, but I have no use of the eyedropper when I click on the Color Picker.
    Also, I am unable to access or manipulate any of the standard fill or stroke options for use of my pen.
    This is what I know.  
    Thanks for your help!   Matt
    Message was edited by: Matt Dubuque to add the fact that the video had been pasted on to a placeholder shape image by pressing Command Option "/" on my Mac.

    Thanks for pitching in Todd and Rick, I appreciate it very much.
    As previously stated, I do have use of the pen tool, but it only has limited functionality as demonstrated by the path I created on the green meadow.  My Tools Panel remains activated .
    My core problem remains that I am unable to adjust the fill or stroke settings for my pen.
    I have tried changing and resetting various work spaces and this has not helped.
    I'm scratching my head here.
    Matt

  • I TUNES CONTENT DISSAPEARED BY CREATION OF A SECOND I TUNES LIBRARY FOR THE I PHONE 4 OF MY DAD. I TRIED TO CREATE A SECOND LIBRARY THAT I HAVE NOW BUT MY ITUNES LIBRARY FULL OF MUSIC, PICTURES AND APPS DISSAPEARED AND I DON'T FIND HIM BACK WHAT DID I DO

    Hello
    I have a big problem.
    The all content of my itunes library dissapeared when i created a second library for my dad's iphone.
    Now i have a library on his name that is empty and i lost the all content of my own library that was full of music, apps, pictures, ...
    What can i do to solve this problem. I hope i can repair this problem.
    Can somebody please help me very quickly.
    Thanks a lot
    Krystal from Belgium

    Hello
    I have a big problem.
    The all content of my itunes library dissapeared when i created a second library for my dad's iphone.
    Now i have a library on his name that is empty and i lost the all content of my own library that was full of music, apps, pictures, ...
    What can i do to solve this problem. I hope i can repair this problem.
    Can somebody please help me very quickly.
    Thanks a lot
    Krystal from Belgium

  • Full screen caller picture on iOS 7.1?

    Now that iOS 7.1 is out I successfully upgraded my iPhone 5.
    It changes the full screen pictures to a small picture in a circle. It used to be more 
    aesthetically pleasing, showed more information at a glance, it's totally beyond me while they would change something that looked so good.
    Is there any way to restore the full screen caller images?

    Dearest Apple I love your designs and so I am going to cut you some slack but please fix.  Tnis is how serious it is : I am on iPhone since 3GS.  This is the first time ever i am not going to upgrade on the very day the new iOS came out.   I am not going to upgarde despite the fact that my iPhone 5S crashes and restarts two times a day without an apparent reason and iOS7.1 apparently fixes that.  I am not going to upgrade despite the fact that since 4S I am looking to change the Siri UK English voice to female and now I could.  I will eventually have to upgrade when I buy a CarPlay compatible car but you will have fixed it by then and all will be forgotten;)

  • I have an older version of imovie.  After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

    I have a five year old version of imovie that generally works fine.  However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom.  Any suggestions?

    Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
    Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
    See here:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
    Let us know how that works for you.

Maybe you are looking for