Belle update available and not available?
when will for c6_01 product bode:059c3b0 i am in bahrain update shown in mobile but not in Nokia suite 3.3
If you're not getting the update via Nokia suite or OTA, then probably it has not been released either by Nokia or by your mobile operator. V25.007 has a few minor bug fixes and stability improvements only. So for that reason, your mobile operator may not be ready to spend money and resources to test and release this update. And for your other question, yes, you can update to symbian belle without this update. As a matter of fact, you can update to symbian belle from any version of firmware in your mobile, meaning launch software, PR 1.1, 1.2 or Anna. Check your internet connection or your firewall... It may be blocking Nokia suite. Or else try again after sometime, may be Nokia's server may have been busy. Hope I've answered your questions...
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"
Similar Messages
-
The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.
The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
Try disabling the computer's security software during the download and update. -
HT4623 The software update option is not available under my general tab...now what
The software update option is not available under my general tab...now what
The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
HT1600 Update version 6 not available in Canada?
After turning on AppleTv 3, it said update available and started to download something. After about 20 min. a message came saying update failed.
Checked under Software Update in General, it said Software up to date, however checking the software version # revealed #5.xx.
What gives?
I guess the latest update (# 6) is not available in CanadaIt's more to do with the fact that the 6.0 update has been made unavailable due to some issues some users have experienced. I gather then, that in-between your ATV telling you there was an update available, and you trying to download it, the update had been withdrawn temporarily. Don't worry about it, carry on, as you were. When it next notifies you that there's an update available - wait. Wait a while before updating. Check this forum to see if there are any reported problems before making your next move.
-
HT201210 ipod touch stuck in recovery mode...try updating says server not available try again later
ipod touch stuck in recovery mode...try updating says server not available try again later
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
It could be that the servers are down/overloaded -
Under View Sorting Options the Manual sort option is dimmed and not available; how do I fix?
Under the View tab, Sorting Options, the Manual Sort is dimmed and not available to me; how do I fix?
In an album just drag the photos where you want them. Manual sorting is not available in smart albums
LN -
My new filters tree flames and picture frame are greyed out and not available?
my new filters tree flames and picture frame are greyed out and not available. what do I need to do?
It's likely that your graphics card/GPU does not support the new feature. If you are using an older video card or an integrated graphics card that is not new like the Intel Iris or Iris pro than that is likely the reason.
-
Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.
UN-successful Windows Update Log:
2014-05-07 09:33:56:180
1036 e70
Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-07 09:33:56:220
1036 e70
Misc = Process: C:\Windows\system32\svchost.exe
2014-05-07 09:33:56:221
1036 e70
Misc = Module: c:\windows\system32\wuaueng.dll
2014-05-07 09:33:56:180
1036 e70
Service *************
2014-05-07 09:33:56:221
1036 e70
Service ** START ** Service: Service startup
2014-05-07 09:33:56:222
1036 e70
Service *********
2014-05-07 09:33:56:544
1036 e70
Agent * WU client version 7.6.7600.256
2014-05-07 09:33:56:545
1036 e70
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-05-07 09:33:56:546
1036 e70
Agent * Access type: No proxy
2014-05-07 09:33:56:547
1036 e70
Agent * Network state: Connected
2014-05-07 09:33:57:315
1036 e70
Setup Service restarting after SelfUpdate
2014-05-07 09:33:57:545
1036 e70
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:33:57:592
1036 e70
Report CWERReporter::Init succeeded
2014-05-07 09:33:58:326
1036 e70
Report *********** Report: Initializing static reporting data ***********
2014-05-07 09:33:58:376
1036 e70
Report * OS Version = 6.1.7601.1.0.65792
2014-05-07 09:33:58:376
1036 e70
Report * OS Product Type = 0x00000030
2014-05-07 09:33:58:394
1036 e70
Report * Computer Brand = Hewlett-Packard
2014-05-07 09:33:58:444
1036 e70
Report * Computer Model = HP Compaq 4000 Pro SFF PC
2014-05-07 09:33:58:455
1036 e70
Report * Bios Revision = 786H7 v02.00
2014-05-07 09:33:58:504
1036 e70
Report * Bios Name = Default System BIOS
2014-05-07 09:33:58:554
1036 e70
Report * Bios Release Date = 2011-01-31T00:00:00
2014-05-07 09:33:58:554
1036 e70
Report * Locale ID = 1033
2014-05-07 09:34:03:562
1036 f08
Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
2014-05-07 09:33:58:565-0400 1
199 101
{0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
1 240005
SelfUpdate Success
Content Install Installation successful and restart required for the following update: Windows Update Aux
2014-05-07 09:34:03:614
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing global settings cache ***********
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS status server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * Target group: CO
2014-05-07 09:34:42:049
1036 e70
Agent * Windows Update access disabled: No
2014-05-07 09:34:42:063
1036 e70
DnldMgr Download manager restoring 0 downloads
2014-05-07 09:34:42:089
1036 e70
AU ########### AU: Initializing Automatic Updates ###########
2014-05-07 09:34:42:089
1036 e70
AU AU setting next detection timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU AU setting next sqm report timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU # WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:090
1036 e70
AU # Detection frequency: 22
2014-05-07 09:34:42:090
1036 e70
AU # Target group: CO
2014-05-07 09:34:42:090
1036 e70
AU # Approval type: Scheduled (Policy)
2014-05-07 09:34:42:090
1036 e70
AU # Scheduled install day/time: Every day at 3:00
2014-05-07 09:34:42:090
1036 e70
AU # Auto-install minor updates: Yes (User preference)
2014-05-07 09:34:42:105
1036 e70
AU Initializing featured updates
2014-05-07 09:34:42:116
1036 e70
AU Found 0 cached featured updates
2014-05-07 09:34:42:116
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU AU finished delayed initialization
2014-05-07 09:34:42:117
1036 e70
AU AU setting next sqm report timeout to 2014-05-08 13:34:42
2014-05-07 09:34:42:117
1036 e70
AU #############
2014-05-07 09:34:42:117
1036 e70
AU ## START ## AU: Search for updates
2014-05-07 09:34:42:117
1036 e70
AU #########
2014-05-07 09:34:42:291
1036 e70
AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:34:42:341
1036 f08
Agent *************
2014-05-07 09:34:42:341
1036 f08
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:34:42:341
1036 f08
Agent *********
2014-05-07 09:34:42:341
1036 f08
Agent * Online = Yes; Ignore download priority = No
2014-05-07 09:34:42:341
1036 f08
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-05-07 09:34:42:341
1036 f08
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 09:34:42:341
1036 f08
Agent * Search Scope = {Machine}
2014-05-07 09:34:42:341
1036 f08
Setup Checking for agent SelfUpdate
2014-05-07 09:34:42:342
1036 f08
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:34:42:349
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:42:392
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:669
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:44:676
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:754
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:777
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:781
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:788
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:837
1036 f08
Setup Determining whether a new setup handler needs to be downloaded
2014-05-07 09:34:44:855
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-05-07 09:34:44:862
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:862
1036 f08
Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
2014-05-07 09:34:44:862
1036 f08
Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
2014-05-07 09:34:44:863
1036 f08
Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
2014-05-07 09:34:44:873
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:44:932
1036 f08
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:44:933
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:048
1036 f08
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:048
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:234
1036 f08
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:235
1036 f08
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-05-07 09:34:48:415
1036 f08
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-05-07 09:34:48:415
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:34:48:424
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:424
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:424
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:34:48:454
1036 f08
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-05-07 09:34:48:454
1036 f08
PT WARNING: SOAP Fault: 0x00012c
2014-05-07 09:34:48:454
1036 f08
PT WARNING: faultstring:Fault occurred
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ErrorCode:ConfigChanged(2)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Message:(null)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
2014-05-07 09:34:48:464
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:464
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:464
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:35:06:497
1036 e70
AU Forced install timer expired for scheduled install
2014-05-07 09:35:06:497
1036 e70
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-07 09:35:06:497
1036 e70
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:06:498
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:14:236
1036 f08
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-05-07 09:35:14:236
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:35:20:118
1036 f08
Agent * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
2014-05-07 09:35:20:194
1036 f08
Agent *********
2014-05-07 09:35:20:194
1036 f08
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:35:20:194
1036 f08
Agent *************
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 bb8
AU >>## RESUMED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU # 0 updates detected
2014-05-07 09:35:20:209
1036 bb8
AU #########
2014-05-07 09:35:20:209
1036 bb8
AU ## END ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU #############
2014-05-07 09:35:20:210
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:210
1036 bb8
AU Featured notifications is disabled.
2014-05-07 09:35:20:211
1036 bb8
AU AU setting next detection timeout to 2014-05-08 11:19:46
2014-05-07 09:35:20:211
1036 bb8
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
2014-05-07 09:35:20:193-0400 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
2014-05-07 09:35:20:194-0400 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-05-07 09:35:25:184
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:37:32:440
1036 f08
Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
2014-05-07 09:37:32:454
1036 f08
Report Reporter successfully uploaded 3 events. -
It is hooked up to good wifi and it is updating apps and not updating it just says waiting and it wont update or install anything while it is doing that how do I get it to stop updating?
Fix iPhone Apps Stuck "Waiting" During Installation
-
My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?
My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?
If you toggle Airplane mode On/Off, does it resolve?
-
OSB to Object Types: difference between NULL value and not available
Hello all,
I have a question about Object Types. More specifically, how to differentiate between an empty value (null) and a string not available.
This is my case:
I have created an object type with three parameters.
CREATE OR REPLACE TYPE OSB_EMP_OBJ_TYPE AS OBJECT
(EMP_ID NUMBER
,DEPT_ID NUMBER
,ORDER_ID NUMBER
,CONSTRUCTOR FUNCTION OSB_EMP_OBJ_TYPE
RETURN self as result
/I would like to see what happens when I put an empty string into emp_id, NULL into DEPT_ID and nothing into ORDER_ID.
To do so I have this test script:
declare
p_emp OSB_EMP_OBJ_TYPE := OSB_EMP_OBJ_TYPE();
begin
p_emp.EMP_ID := '';
p_emp.DEPT_ID := null;
-- p_emp.ORDER_ID := null;
if p_emp.EMP_ID is null
then
dbms_output.put_line('Empty');
end if;
if p_emp.DEPT_ID is null
then
dbms_output.put_line('NULL');
end if;
if p_emp.ORDER_ID is null
then
dbms_output.put_line('Not available');
end if;
end;The result of this is:
Empty
NULL
Not availableIt seems that Oracle treats all three situations alike. What I would like to achieve is a way to see that p_emp.ORDER_ID was not initialized.
To elaborate a bit: in our production system this procedure would be called from OSB and the object type would by the input for that procedure. Our database version is 10.2.0.5.0.
Our procedures look something like this:
procedure p_procedure ( p_emp in osb_emp_obj_type )
is
begin
do_something;
end;Can anyone tell me if there is a way to achieve this, so I can see whether or not a value in the object type was filled?
Thanks in advance!Darn...
Eventually we want to use this for an update procedure. The client gets all current data from the database by calling a webservice that (using OSB) selects the data from our database. What we want to achieve is that the client can update that data, by returning only the changed fields to an update procedure.
We then handle an empty tag to update the field to null, and we ignore missing tags.
OSB itself can handle this, but PL/SQL can't.
I'm now thinking of adding an indicator to each optional field (clear_field_yn). OSB can still check for empty tags or missing tags. When a tag is empty, it's corresponding indicator will be set to 'Y'. If the tag is missing, then it will be set to 'N'.
Is that a solution to consider, or is there a much simpler approach possible? -
Symbian Anna update 1/2 not available
Hi,
I have just updated my phone (N8 Hungarian T-Mobile version) to Symbian Anna but the update package 1/2 is not available. Could anyone help? Thanks.
Some details
First I tried to update many times using Ovi Suite but it failed during the backup phase (service not available message) - finally I updated using Nokia Software Updater and the update to Anna was completed successfully.
I went to check the additional update packages but only Update package 2/2, Ovi Store update and Social update were available. All installed successfully. Update package 1/2 was missing from the list of available updates!
As expected, without update package 1/2 the PDF Reader and QuickOffice are not available.
I checked many times yet again but 1/2 still not available. Is there a way I can install update package 1/2?
Solved!
Go to Solution.Symbian Anna update package 1/2 appeared today as an available update and installed successfully. This issue is solved. Thanks.
-
Update for E5 not available in my country despite ...
I got a Nokia E5 and my software version is 071.003. My local Nokia support website claims the latest software version is 101.003. But when I try to update my software version with the Nokia Suite it tells me version 101.003 is not available (yet) for my country?
How is that possible and what would be a possible solution? I live in The Netherlands.Does it say 'not available (yet) for your country' or 'not available (yet) for your DEVICE' ? As availability depends on Product Code / Region and and also Network locked devices can get updated only after an approval from the Operator..one of these is preventing you from getting it.
If you want, you may ask your local Nokia Care whether they can help you out .. -
TS1424 Why is house season 8 only by episode only and not available in HD?
The option to buy the episodes on HD isn't available and I cant buy the season in its entirety. Please Help! Thanks
You don't say what country that you are in, but assuming that it's the US then series 8 is currently only available in SD and only on an episode-by-episode basis - whether that will change we won't know (we are fellow users), but it will require the TV company/US rights-holder to provide HD versions of the show and/or do a 'series pass' for it, it's not Apple's decision.
-
Set as available and not appearing as such
Hi
I complain that my son and grandchildren never call for iChat while my son complains that I am never available when they call. My computer is always on, iChat has been always on for some weeks now. My son never appears in my Buddy list as at his computer. Are we just missing each other? I have set energy saver for computer and screen to 'never sleep' and so I do it manually when I leave the computer. Screen saver seems to be unstoppable - could that make a difference? Why does he think I am not there? When we are lucky and coincide we can talk and see each other quite well, so it can work, that I know.
He runs Leopard on a new Mac Book ( think it is).
You could save our relationship if you can solve this one for me!
Best wishes
YnysThere are several possibilities here.
1) You have an AIM name and he has added you as an @Mac name.
2) The reverse. (both in names and ends)
3) a straight forward misspelling of a Screen Name.
4) The names have become Blocked. (Check: iChat > Preferences > Accounts > Security tab and the list with the Edit button)
You seem to be saying that he is not in your Buddy List (As an Online person) Check Blocking and spelling and type of Account/screen Name you have him set as.
You can do this by highlighting his name in the Buddy list and using the Apple Key and i together (Get Info) and looking at the Address card tab).
In addition you seem to say that you do appear in your son's Buddy List but he never sees you as Available and this seems to be the Screen Saver/Sleep feature possible showing you as Away.
It sounds as if two things are happening.
Your computer is showing you as away.
You have added him as the wrong Buddy Type or misspelt his Screen name.
3:35 PM Saturday; April 5, 2008
Maybe you are looking for
-
Help! Am trying to change the speed of a film clip and am having probs
Hi there all, this is my first foray into Apple Supp Communities, so thanks in advance for your help:) I have downloaded an 8min HD video from my new Panasonic camera into imovie. All good. Now for some reason when I click on the movie it is halved i
-
I am putting together this system on a new 6215 with a 1 GHz PIII, 256 MB RAM and a 80GB HDD. Everything was fine - I installed WinXP Home. Everithing was also fine. Today i changed the BIOS-Setting for Power-Up with Keyboard. Now, I couldn't get the
-
I cannot get my HP officejet 7000 to work with my Macbook Pro?
I installed the HP Officejet 7000 and at first it worked ok however on rebooting my Macbook Pro I can no longer connect to the printer? This has happened with 2 different HP Officejet 7000 printers. Does anyone have a solution?
-
Folks, I found my wife dropping the icon of her backup file into the trash icon on the dock. She had just completed using Time machine and when to uninstall the Gdrive. I told her this was an erroneous practice. She disagreed. Who is right? Thank
-
Hi All, I have few BASIC Questions on converting RGB to CMYK in Photoshop and Illustrator. Hope could get some professional insights here. 1, Are all the DTG printers set only in CMYK color mode ? 2, If there is no difference after viewing RGB image