Belle update,now pink screen

I know of the N8 pink screen problem and it only mildly affected my N8 under pr1.1,the Anna update, but after updating to the officially released Belle 609 it now suffers quite badly from the pink screen (greys are pink).
Although it does not really bother me too much I think it shows that the problem to be more software than hardware,which is why screen change repairs often don't work.
Has anybody else noticed this problem?
Also battery life is poorer and phone runs hotter,suggesting maybe a slight software overclock .
All that aside I still love my N8 and Belle.
Moderator's note: Post edited because it contained information about unofficial ways to update the device software. Doing so might void the warranty of the device, and possibly damage it. Therefore it is not allowed to discuss about unofficial update methods on Nokia Discussions forum.

Did you use a higher screen brightness setting with Anna than now with Belle?
If you did, the pink screen issue might be more noticeable.
What screen brightness setting are you using now?

Similar Messages

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly.

Iphone update now usb screen lock

Please help Iphone updated, now locked on itunes usb screen

And so what happens when you actually connect your phone to your computer via USB like the logo indicates?

Update now blank screen on MacBook Pro

I updated MacBook Pro yesterday and after restart the screen was and still is blank. Restarts do nothing. Any ideas?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Did latest updates now grey screen

Hi All,
I guess I didn't wait long enough before doing the last updates....... I first ran the firmware update by itself, everything seemed to work fine. I then repaired permissions and ran all the other updates. Now, I get a grey screen with the Apple logo, a spinning dashed wheel, and a grey progress bar that goes about 1/2" then disappears, followed by another progress bar that goes about 1/2" then the computer shuts down.
I have tried zapping the pram.
I then started from the 10.6 install DVD and ran Disk Utilities. It said my disk (drive) needed to be repaired and to repair the disk. I ran "Repair Disk" only to get a message that said it was "unable to repair disk" (or something close to that).
Any thoughts before I wipe the drive (I really don't want to do that even though I think I backed-up everything)?
Thanks in advance.
P

ok... i just got back from the apple store genius bar and the tech was able to boot my computer up to another mac using a fire wire cable so that i could transfer my files off (i have an emac, so when i got home i hooked them together with a fire wire cable, pressed and held the 't' key while starting the PB up, and it booted as a drive on my emac so i could copy my important files over).
my next step is to send it out to apple service. unfortunately i don't have apple care coverage, but it will only cost $310 plus tax to fix EVERYthing that is wrong with it. this works out to be a pretty good deal since i'm fairly sure i need a new logic board, dc inboard, battery, and lower memory slot. hopefully they'll be able to fix all that and send my PB back to me good as new.
unfortunately, i don't know how to solve the 'not being able to start up' issue, and i'm sorry to hear others are having the same issue. the tech at apple was not able to get my PB to start back up even after resetting the PMU. hopefully someone else will find a solution to this... as for me i'm just going to bite the bullet and send it out to get fixed.

Lenovo G530 bios update now blue screen!!!

Ok i have a lenovo G530 with service code 4446-23u. I downgraded to windows XP and it was running fine. I was on lenovo.com and saw that there were newer bios then what i was using(i think i had 1.06, and there is now 1.09 ) so i decided to flash my bios to get them up to date. It flashed fine and asked me to reboot so i said Ok and now everytime i try to start the computer it goes through the bios screen onto the windows XP boot screen then flashes the "Blue Screen" and reboots. It won't start in safe mode or any mode. I put in my XP disk to reinstall XP and i get it to boot from cd and it loads for a while then goes to the "blue screen". Anyone know what is causing this? or how to fix it? I am completely fine with going back to the old bios but don't know how to do that or if its possible.
these are the bios i used:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70994
Please help, and thanks Jared
Solved!
Go to Solution.

Got it figured out. I had to change the Sata in the bios back to ide.

I was updating my ipod and i lost wifi, so i turned off my ipod, and when i tried to turn it on it went to the normal apple logo then flashed and went to a pink screen. Ive tried restoring it, but it hasnt worked. PLEASE HELP

So i was updating my ipod earlier yesterday, i kinda steal wifi from the neighbors so it was pretty weak.... i lost wifi (i think) because it stopped loading, so i turned off my ipod. And when i tried turning it on again it did the apple logo then went to a full out pink screen. Ive tried turning it back on and off a billion times, and sometimes the screen colors will change. I recently just tried restoring it like 10 times and usually itll just interenwrupt the restoring process. By the way, wh i plug it into the computer it doesnt recognize the device. I had to put it into recovery mode. Pleasehelp, this ipotd is my life. I cant take it to the apple store because its badly cracked, and ive had it for about 2 y and a half years. PLease help.

Hi-
I had the same thing happen to me Thursday night, and I just got mine right 30 minutes ago (and it is now Saturday am). Like you I repeatedly tried to restore it (by holding down the home key and powere button at the same time; then plugging it up to my computer and trying to get it to restore through iTunes). My computer didn't initially recognize my ipod either. - One thing- be sure that your battery isn't dead/dying. If it is, charge it (it should charge-mine did), then start the process of restoring it again. Make sure when you hold the home and power keys down that you are linked to iTunes.- You will eventually get a screen that has the itunes icon it, with a usb cable underneath it. At that point your computer will recognize your ipod, and you'll be able to restore it...This will take a LONG time.- Good luck.

HT4623 I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes) I can't get it to go away or to access my ipad. Any hints?

I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes) When I do this it wants to restore my ipad, which I have already done. I can't get out of this screen. Any hints on what to do next?

Something went wrong with your update; you are in Recovery Mode.
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times

TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
worth looking at for the future to understand backing up etc

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

Now iTunes will not recognize my phone as a device...

I did the iOS 7 seconds update and now my screen is just a plug and iTunes logo. I don't have a computer anymore just iPad. What do I do

I did the iOS 7 seconds update and now my screen is just a plug and iTunes logo. I don't have a computer anymore just iPad. What do I do

Hello,
My suggestion would be to do the following:
-Press and hold the power button and home button for the time needed until the screen turns black and the apple logo reappears.
If that does not work, call the nearest Apple store and ask for assistance.
Hope this helps,
TechnologyGuy

My iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

my iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

my iphone 4 after update stuck lock screen but working other option ex control pannel voice control , call attenting etc.please clear buges soon now suning os7.0.3

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

Belle update,now pink screen

Similar Messages

Maybe you are looking for