Benchmarking problem ORiON solaris 10 - non test error occured

Hi,
I am running a whole bunch of ORION jobs in sequence against raw LUNs on an EMC storage using Solaris 10.
This to identify the performance at different read/write percentage and random/sequential IO patterns.
Once in a while, in the middle of testing the following appears :
Non test error occurred
Orion exiting
After which the test aborts.
I am trying to investigate the cause for this error, the DMESG and /var/adm/messages left turned up nothing however.
The strange thing is that the next test using the same amount of LUNs but only a difference in random or sequential pattern (or read/write percentage) works just fine.
Does anybody have any reference to what are possible causes of "non test error"
Thanks
seb

This forum is about using Sun Studio. Your question is about tripwire, which is not a Sun product, and gcc, which is not Sun Studio. I suggest you take your question to a tripwire forum. Check the location where you got tripwire for a support forum.

Similar Messages

OER Applet Error - A non-fatal error occurred when fetching an entity id

Suddenly I have a problem when I want to run 'graphic representation of related items' applet from Oracle Enterprise Repository 11.1.1.2. Thinkmap console shows up wit following message:
Error: A non-fatal error occurred when fetching an entity id : : Remote Error: Login required to view information.
Error: A non-fatal error occurred when loading entities : : Remote Error: Login required to view information.
Error: cannot set initial center entity : java.lang.NullPointerException
I suspect it's some issue with JRE, since everything worked fine few weeks ago. I've also tried to downgrade to JRE 1.5, but I still get the same error. I've tured on debugging and in java console I get this:
Trace level set to 5: all ... completed.
basic: Starting applet teardown
basic: Finished applet teardown
basic: Added progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@16aa42e
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 762277 us, pluginInit dt 123357325 us, TotalTime: 124119602 us
+network: Cache entry not found [url: http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp, version: null]+
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/thinkmap/gui.jsp requesting to set-cookie with "JSESSIONID=tbGzMsGDKnnn5pRnK9B9vT1TMf7PKLljxnpJHjVBcQLpnLLBnlhf!835222537; path=/; HttpOnly"
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@16aa42e
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
basic: Applet started
basic: Told clients applet is started
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/thinkmap/my.tas requesting to set-cookie with "JSESSIONID=GVQ8MsGDGTzVGyQTn81n2wQ6hsLJB1p0GBwQD8VhnJJKhr3glNdt!835222537; path=/; HttpOnly"
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/thinkmap/my.tas with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/thinkmap/my.tas requesting to set-cookie with "JSESSIONID=LdmyMsGDmRt4CQlw6KKxprRVF0KGMXxjpr38h2dRnYGnTNp2jx5J!835222537; path=/; HttpOnly"
Browse tree doesn't work either..message in Java console is:
+network: Cache entry not found [url: http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100&registrationstatus=100&target=results, version: null]+
network: Connecting http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100&registrationstatus=100&target=results with proxy=DIRECT
network: Connecting http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100&registrationstatus=100&target=results with cookie "flashline.authtoken=-5cfd1072-1298307490b--7ff5; flashline.userlogin=; flashline.username=user1"
network: Server http://somesrv.domain.si:7101/oer/com.flashline.cmee.servlet.enterprisetab.AssetTree?depth=2&top=true&cattypeid=100&registrationstatus=100&target=results requesting to set-cookie with "JSESSIONID=HxQCMsKTpGpv3Wrr2vhqHWK06pDR4tpk6QjC1BWJyYSsP7TwLvlJ!835222537; path=/; HttpOnly"
Anybody has an idea what is wrong and how to resolve this problem.
Thnx in advance.
Edited by: Teki on 7.7.2010 10:19

I figured out what is causing this problem: When connecting OER with LDAP according to documentation (http://download.oracle.com/docs/cd/E15523_01/doc.1111/e16580/extauth.htm#CEGHHGAG ) you have to disable cookie login functionality. Now i figured that 'graphic representation of related items' and 'browse tree' applets are not working if there is no cookie for user. So in order for those two applets to work I have to enable enterprise.security.cookielogin.allow and enterprise.authentication.ldap.enabled (or manually check the Enable automatic Login box).
Is there any other setting or workaround that would ensure that mentioned applets would work properly without enable automatic login option checked?! And what is the problem if I do have LDAP authentication and cookie login enabled (why is explicitly stated in documentation that I should disable cookie login with LDAP authentication?) Can someone from Oracle clarify this please?
Edited by: Teki on 7.7.2010 11:43

How do I troubleshoot "A non-SQL error occurred while requesting a connection from DSN ." errors?

Hello,
Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
We have 2 load balanced app servers:
Windows Server 2008 R2 (virtualized)
ColdFusion 8, Enterprise
And a database server:
Windows Server 2008 R2
SQL 2012
The error in “coldfusion-out.log” is:
A non-SQL error occurred while requesting a connection from <DSN>.
Timed out trying to establish connection
This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
Thanks for your help!

I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

Problems with iTunes Festival "A error occurred loading this content"

Hi
I'm having problems getting iTunes Festival to work, I can click through shows but when i click on "play" for any particular one I get the dreaded "An Error Occured loading this content"
So far from what I've tried, most things work well, some things give me that error:
What works well:
Netflix
Podcast
Redbull TV
Bloomberg
What give me "an error occured loading this content":
iTunes Festival
Crackle
(note: i havent tried everything yet)
What I've tried:
1) restarting apple tv
2) resetting (pressing down and menu at the same time)
3) resetting my wifi router
4) changing ATV DNS to google 8.8.8.8
5) changing ATV DNS to auto
I'm pretty sure its not my wifi or router because netflix and etc work in HD with no pr

I have the same problem I use a BT home hub the old white one and a iPad 4 if I reboot the hub it works ok for pics and some I player content then when I try to load a certain program it crashes and I need to reboot the hub again. Is this a problem with the hub?

Problem while deploying app : An error occurred while contacting the subscription settings service

I am trying to deploy a provider hosted app.
According to various articles by MSDN, I have configured the app domain, the necessary services.
When I go on deploying the app, I get this error:
Error occurred in deployment step 'Install app for SharePoint': The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
I am not able to figure out where exactly the steps have gone wrong?
When checked with ULS Log Viewer, I am able to find the cause, which says
An error occurred while contacting the subscription settings service at 'http://spsite/795a076a57c543748c151b79ffc60e6c/SubscriptionSettings.svc/optimized'.

Hi,
I assume you have seen this article:
http://technet.microsoft.com/en-us/library/fp161236.aspx and that you created the Subscription Shared Service. Are you on the released version of SharePoint?
Try stopping and restarting the subscription service from central admin.
Cheers
Yina

Been having problem downloading iPad software update error occurs 2/3 way

Error keeps occuring need help

That's too bad. When you are truly ready for help, try being less vague and provide specifics (such as the exact error) that is occuring.

Orion i/o test on Ramsan

hi all,
hope this is the right forum for this.
I've installed orion on rhel 6 and would like to test it on ramsan drive.
there is fresh rhel install without dbms.
first I tested it on ssd:
cat orion1.lun
/dev/sda
./orion_linux_x86-64 -run advanced -testname orion1 -num_disks 1 -write 0 -simulate concat -matrix detailed
it worked
afterwards I tested on ramsan:
cat orion1.lun
/dev/rsXX0
./orion_linux_x86-64 -run advanced -testname orion1 -num_disks 1 -write 0 -simulate concat -matrix detailed
and it gives me this error:
storax_aiowait: IO returned an error 27061
OER 27061: waiting for async I/Os failed
Linux-x86_64 Error: 14: Bad address
Additional information: -1
Additional information: 8192
lun_aiowait: storax_aiowait failed.
rwbase_run_test: rwbase_reap_req failed
rwbase_run_process: rwbase_run_test failed
rwbase_rwluns: rwbase_run_process failed
orion_thread_main: rw_luns failed
Test error occurred
Orion exiting
so what's wrong?
has anybody used it on ramsan drive?
thanks in advance

You may have run into Bug 9104898: ORION FAILS WITH ORA-27061: WAITING FOR ASYNC I/OS FAILED
BUG 9104898 mentions that version 11.1.0.0 is working
You did not mention which orion version you are running. The orion tool is part of the Oracle Database 11gR2 installation. I suggest to try the latest version that ship with the Database installation.

ORION on RH EMT64 error

Hi
I am trying to run orion on my RH Minux EMT64 environment. I am getting error while running simple test.
Here is the error mesage
./orion_linux_em64t -run simple -testname tctest1 -num_disks 2
ORION: ORacle IO Numbers -- Version 11.1.0.0.0
Test will take approximately 16 minutes
Larger caches may take longer
storax_aiowait: IO returned an error 27061
OER 27061: waiting for async I/Os failed
Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 8192
lun_aiowait: storax_aiowait failed.
rwbase_run_test: rwbase_reap_req failed
rwbase_run_process: rwbase_run_test failed
rwbase_rwluns: rwbase_run_process failed
orion_thread_main: rw_luns failed
Test error occurred
Orion exiting
Any help?
Thanks
PG

Thanks Madrid
I read the blog, but it doesn't give any solution. I tried with one lun also, but get same error again and again.
When I run in -verbose mode, here is what I get
ORION: ORacle IO Numbers -- Version 11.1.0.0.0
Test will take approximately 44 minutes
Larger caches may take longer
Name: /dev/sdj2 Size: 52426702848
Name: /dev/sdk2 Size: 52426702848
Name: /dev/sdl2 Size: 52426702848
Name: /dev/sdm2 Size: 104847644160
Name: /dev/sdn2 Size: 104847644160
Name: /dev/sdo2 Size: 104847644160
6 FILEs found.
TEST START
Running point: Small=0, Large=0
Point 1 out of 43
Valid
Running point: Small=1, Large=0
Point 2 out of 43
storax_aiowait: IO returned an error 27061
OER 27061: waiting for async I/Os failed
Linux-x86_64 Error: 5: Input/output error
Additional information: -1
Additional information: 8192
lun_aiowait: storax_aiowait failed.
rwbase_run_test: rwbase_reap_req failed
rwbase_run_process: rwbase_run_test failed
rwbase_rwluns: rwbase_run_process failed
orion_thread_main: rw_luns failed
Test error occurred
Orion exiting
-PG

Error occured while sending a form in test in HCM Process & Forms

Hi
An error occured while testing my process in Design Time Tool. All the process, form, and workflow are consistent and activated, however when I send the form in test program available in Design Time Tool I get a Short Dump (as below) followed by the error "Workflow Item Not Found, Workflow Not Started."
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_UNKNOWN
ABAP Program           CL_POBJ_CASE==================CP
Application Component PA-AS
Date and Time          23.02.2012 09:38:34
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_POBJ_CASE==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"CL_POBJ_CASE==================CP" or "CL_POBJ_CASE==================CM00D"
"IF_POBJ_CASE~CREATE_CASE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Looking forward to your expert advice to resolve this error.
Best regards
Imran

This can be a few things....
1. Make sure you set up your number range for CASE Mgmt (t-code SCASE_NUMBERANGE)
2. if the POBJ_MODEL is missing in your CASE Mgmt environment
3. if the doc id for your object models (process, scenario, case) are somehow "out of whack" (not matching) between CASE mgmt, SCASE_CUSTOMIZING and SRMREGEDIT
4. authorization issues (which it more likely is)... I know it sounds weird, but even giving you SAP_ALL will not do it (even it is missing some of the auth objects). You have to be able to read/write to CASE Mgmt (so the related auth objects are needed....look for ones with S_SRM* or S_SCM*). Also, WF-BATCH user needs this auth as well!
This part can be a PAIN to get sorted out.

While running the livecache server test a native sql error occures

We are using scm4.1 livecache 7.5.0 And every time we are running the livecache test program he is dumping
whith the following dump
patch level scm & scm_basis is 8
Runtime Errors         DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
Date and Time          31.10.2005 16:50:55
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error 600 occurred in the current database connection "LCA".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "Work rolled back: DbpError -28814 in
APS_ORDER_CH"
Database error code .......: 600
Triggering SQL statement...: " ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? or'"
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"/SAPAPO/SAPLOM_PLANNING" or "/SAPAPO/LOM_PLANNINGU08"
"/SAPAPO/OM_ORDER_CHANGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"/SAPAPO/OM_ORDER_CHANGE"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "bebruap2"
Network address.......... "195.213.49.227"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "BEBRUAP2"
Database type............ "MSSQL"
Database name............ "APD"
Database owner........... "apd"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 23 2005 00:00:49"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "87"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8176
EM....................... 24040336
Heap..................... 0
Page..................... 1687552
MM Used.................. 1516920
MM Free.................. 572032
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "CGRAULS"
Language key........ "E"
Transaction......... "/SAPAPO/OM03 "
Program............. "/SAPAPO/SAPLOM_PLANNING"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLOM_PLANNING" in
"/SAPAPO/OM_ORDER_CHANGE".
The main program was "/SAPAPO/OM_TB_FLOW_QUANTITY ".
The termination occurred in line 91 of the source code of the (Include)
program "/SAPAPO/LOM_PLANNINGU08"
of the source code of program "/SAPAPO/LOM_PLANNINGU08" (when calling the
editor 910).
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "/SAPAPO/OM_ORDER_CHANGE" "(FUNCTION)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "/SAPAPO/SAPLOM_PLANNING ". Its source code
starts in line 5
of the (Include) program "/SAPAPO/LOM_PLANNING$08 ".
Source Code Extract
Line
SourceCde
61
is_gen_params-simversion
62
is_gen_params-dont_set_netchg_flag
63
space.
64
65
Kontrollstruktur IS_GET_CHANGED_OPTIONS anpassen.
66
IF NOT et_changed_orders IS REQUESTED.
67
is_get_changed_options-send_chg_top_order = gc_false.
68
ENDIF.
69
IF NOT et_changed_cap_reqs IS REQUESTED.
70
is_get_changed_options-send_chg_cap_req = gc_false.
71
ENDIF.
72
IF NOT et_changed_io_nodes IS REQUESTED.
73
is_get_changed_options-send_chg_ionode = gc_false.
74
ENDIF.
75
IF NOT et_changed_io_pp_nodes IS REQUESTED.
76
is_get_changed_options-send_chg_io_pp = gc_false.
77
ENDIF.
78
IF NOT et_changed_pegids IS REQUESTED.
79
is_get_changed_options-send_chg_pegid = gc_false.
80
ENDIF.
81
IF NOT et_deleted_fix_pegging IS REQUESTED.
82
is_get_changed_options-send_del_fix_peg = gc_false.
83
ENDIF.
84
start_function 'OM_ORDER_CHANGE'.                         "#EC *
85
Verbindung zum liveCache aufbauen
86
check_server.
87
connect_to_livecache.
88
COM-Routine zum Anlegen bzw. Überschreiben eines Zeitstrahls
89
90
EXEC sql.
>>>>>
execute procedure                  "APS_ORDER_CHANGE" (
92
in :ls_gen_com_params,
93
out :lv_rc,
94
in :et_rc,
95
in :it_order_method,
96
in :it_ordkeys,
97
in :it_ordmaps,
98
in :it_orders,
99
in :it_activities,
100
in :it_mode,
101
in :it_cap_reqs,
102
in :it_positions,
103
in :it_inputs,
104
in :it_outputs,
105
in :it_prodflow,
106
in :it_intern_constraints,
107
in :it_extern_constraints,
108
in :it_charact_val_acts,
109
in :it_charact_req_inpnode,
110
in :it_charact_val_outnode,
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Flow Quantity Test
SY-MSGTY
S
SY-MSGID
/SAPAPO/OM_TEST
SY-MSGNO
001
SY-MSGV1
Create transSim
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
3 FUNCTION     /SAPAPO/SAPLOM_PLANNING             /SAPAPO/LOM_PLANNINGU08                91
/SAPAPO/OM_ORDER_CHANGE
2 FORM         /SAPAPO/OM_TB_FLOW_QUANTITY         /SAPAPO/OM_TB_FLOW_QUANTITY           802
CHANGE_DATA
1 EVENT        /SAPAPO/OM_TB_FLOW_QUANTITY         /SAPAPO/OM_TB_FLOW_QUANTITY            11
START-OF-SELECTION
Chosen variables
Name
Val.
No.       3 Ty.          FUNCTION
Name /SAPAPO/OM_ORDER_CHANGE
IS_ATP_INFO
01ATP0000001~CGRAULSXX##
334553333333744545455500
011400000001E37215C38800
000000000000000000000000
000000000000000000000000
IS_CONTROLPARAMETERS
霁က#ం̂⍱㔒鲔#####
2222222222222222222222001007190000022
0000000000000000000000100221240000100
0000000000000000000000910002390000000
0000000000000000000000700C335C000C000
IS_GEN_PARAMS
01PLV0000001~CGRAULS
3354533333337445454522222
010C60000001E37215C300000
0000000000000000000000000
0000000000000000000000000
IS_GET_CHANGED_OPTIONS
2222222
0000000
0000000
0000000
IT_ACTIVITIES
Table IT_274[1x256]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ACTIVITIES
Table reference: 41
TABH+ 0(20) = 5087FFDF00000000000000002900000012010000
TABH+ 20(20) = 0100000000010000FFFFFFFF0487000000290000
TABH+ 40( 8) = 10000000C1308000
store        = 0x5087FFDF
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 41    (0x29000000)
label        = 274   (0x12010000)
fill         = 1     (0x01000000)
leng         = 256   (0x00010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000205
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x180112E0
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 126   (0x7E000000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_CAP_REQS
Table IT_276[1x112]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_CAP_REQS
Table reference: 39
TABH+ 0(20) = 48BB06E000000000000000002700000014010000
TABH+ 20(20) = 0100000070000000FFFFFFFF04870000C0290000
TABH+ 40( 8) = 10000000C1308000
store        = 0x48BB06E0
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 39    (0x27000000)
label        = 276   (0x14010000)
fill         = 1     (0x01000000)
leng         = 112   (0x70000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000209
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x188D04E0
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 124   (0x7C000000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_CHARACT_REQ_INPNODE
Table IT_418[0x140]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_REQ_INPNODE
Table reference: 32
TABH+ 0(20) = 00000000000000000000000020000000A2010000
TABH+ 20(20) = 000000008C000000FFFFFFFF04870000301D0000
TABH+ 40( 8) = 10000000C1308000
store        = 0x00000000
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 32    (0x20000000)
label        = 418   (0xA2010000)
fill         = 0     (0x00000000)
leng         = 140   (0x8C000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000142
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_CHARACT_VAL_ACTS
Table IT_417[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_ACTS
Table reference: 50
TABH+ 0(20) = 00000000000000000000000032000000A1010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store        = 0x00000000
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 50    (0x32000000)
label        = 417   (0xA1010000)
fill         = 0     (0x00000000)
leng         = 156   (0x9C000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000144
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_CHARACT_VAL_OUTNODE
Table IT_419[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_OUTNODE
Table reference: 60
TABH+ 0(20) = 0000000000000000000000003C000000A3010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store        = 0x00000000
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 60    (0x3C000000)
label        = 419   (0xA3010000)
fill         = 0     (0x00000000)
leng         = 156   (0x9C000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000144
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_EXTERN_CONSTRAINTS
Table IT_416[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_EXTERN_CONSTRAINTS
Table reference: 71
TABH+ 0(20) = 00000000000000000000000047000000A0010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store        = 0x00000000
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 71    (0x47000000)
label        = 416   (0xA0010000)
fill         = 0     (0x00000000)
leng         = 124   (0x7C000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000215
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_INPUTS
Table IT_278[1x420]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_INPUTS
Table reference: 63
TABH+ 0(20) = 087400E0C0E303E0000000003F00000016010000
TABH+ 20(20) = 01000000A4010000FFFFFFFF04870000202A0000
TABH+ 40( 8) = 10000000C1308000
store        = 0x087400E0
ext1         = 0xC0E303E0
shmId        = 0     (0x00000000)
id           = 63    (0x3F000000)
label        = 278   (0x16010000)
fill         = 1     (0x01000000)
leng         = 420   (0xA4010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000211
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x78DC11E0
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 123   (0x7B000000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x2029FFDF
hsdir        = 0x00000000
ext2         = 0x00000000
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_INTERN_CONSTRAINTS
Table IT_415[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_INTERN_CONSTRAINTS
Table reference: 49
TABH+ 0(20) = 000000000000000000000000310000009F010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store        = 0x00000000
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 49    (0x31000000)
label        = 415   (0x9F010000)
fill         = 0     (0x00000000)
leng         = 124   (0x7C000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000215
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
store_id     = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_MODE
Table IT_275[1x164]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_MODES
Table reference: 52
TABH+ 0(20) = A03C00E000000000000000003400000013010000
TABH+ 20(20) = 01000000A4000000FFFFFFFF0487000060290000
TABH+ 40( 8) = 10000000C1308000
store        = 0xA03C00E0
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 52    (0x34000000)
label        = 275   (0x13010000)
fill         = 1     (0x01000000)
leng         = 164   (0xA4000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000207
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0xC8F611E0
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 125   (0x7D000000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_ORDERS
Table IT_293[1x320]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDERS1
Table reference: 47
TABH+ 0(20) = 20B403E000000000000000002F00000025010000
TABH+ 20(20) = 0100000040010000FFFFFFFF0400000030380000
TABH+ 40( 8) = 01000000C1308000
store        = 0x20B403E0
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 47    (0x2F000000)
label        = 293   (0x25010000)
fill         = 1     (0x01000000)
leng         = 320   (0x40010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000286
occu         = 1     (0x01000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x9080FFDF
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 1     (0x01000000)
lineAlloc    = 1     (0x01000000)
store_id     = 130   (0x82000000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_ORDER_METHOD
Table IT_268[2x62]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDER_METHOD
Table reference: 51
TABH+ 0(20) = 8882FFDF0000000000000000330000000C010000
TABH+ 20(20) = 020000003E000000FFFFFFFF04000000B0360000
TABH+ 40( 8) = 10000000C1248000
store        = 0x8882FFDF
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 51    (0x33000000)
label        = 268   (0x0C010000)
fill         = 2     (0x02000000)
leng         = 62    (0x3E000000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000278
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x0868FFDF
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 16    (0x10000000)
lineAlloc    = 16    (0x10000000)
store_id     = 122   (0x7A000000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
IT_ORDKEYS
Table IT_271[1x332]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDKEYS
Table reference: 29
TABH+ 0(20) = 80E303E000000000000000001D0000000F010000
TABH+ 20(20) = 010000004C010000FFFFFFFF04870000E0270000
TABH+ 40( 8) = 10000000C1308000
store        = 0x80E303E0
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 29    (0x1D000000)
label        = 271   (0x0F010000)
fill         = 1     (0x01000000)
leng         = 332   (0x4C010000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000199
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 8     (cmpManyEq)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0

Hi,
the error DbpError -28814 denotes that an object cannot be found.
Can you maybe tell me your exact liveCache version (incl. Build level) and LCA Build?
Additionally, please copy the relevant error information from the file (/sapdb/data/wrk/<SID>/)knldiag.err into this thread.
Which exact 'liveCache test program' are your referring to (which of the /SAPAPO/... transactions)?
Kind regards,
Roland

VISA Read over USB Problem: After a while the xBFFF0015 Timeout Error occurred

Hi,
I have trouble using labview with my non-NI USB device:
The device is an analog input DAQ board. I was able to setup communication with the board using a VISA driver specifically created for this board and direct FW calls using the product's firmware specification provided by the manufacturer.
This method has been working pretty good so far, but when I try to get large amount of data (64k samples @100ksps), the VISA Read returns the 'VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.' error.
Please see the attached screenshot of the block diagram for details.
First, an 'analog input scan start' command is sent to the DAQ device, and then the vi tries to read all collected data from the device, once the right amount of data retrieved, or no more data is available the data collecting process (the while loop) ends and an 'analog input scan stop' command is sent to the DAQ device.
The data collection starts with no problem, but after a while, in loop# 400, the VISA Read hangs and then returns the error mentioned above.
I tried to increase the time out value, but it didn't help, the error occurred after the same number of loops, the VISA Read got hosed and the error occurred after the longer timeout expired.
I also tried to add some delays in the loop, but it didn't help either.
I am not sure what do I miss here and I would highly appreciate if anyone could give me some guidance how to solve this issue.
Thanks,
John
Attachments:
usb-read.png ‏18 KB

I just wanted to specify that this is not an NI board avoiding to make people think this is a hardware issue. And I think that the rest of the code is irrelevant in this case.
I believe that I don't use the VISA functions correctly. I assumed that someone who used these functions before would be able to point out the obvious steps missing in the data collecting process using the VISA functions.

Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume. This follows a problem when Time machne terminated when the volume was almost full.

On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

Benchmarking problem ORiON solaris 10 - non test error occured

Similar Messages

Maybe you are looking for