Benchmarks with Bios 1.20 Please Post

Hey all,
I should start by saying the new BIOS works very well for me. I was able to reach new high speeds. I used Aquamark 3D, 3DMark01 and 3DMark03 as benchmarking programs.
With the new BIOS I was finally able to get every last drop of juice out of my RAM by manually setting it at: [email protected] in the BIOS. I experimented with FSB or clock reference settings untill the crash point. Also with the new BIOS I was able to achieve higher than a 205 FSB with my manually specified timings. Previous BIOS's would crash consistently over 205 FSB with anything other than auto settings for me.
The sweet spot for me seems to be 214 FSB [email protected], it has a 100% completeion ratio in over 20 of the tests combined. I was able to complete one Aquamark 3D test at 218 FSB.
Results:
                                        128M Aperture, FSB 214, [email protected]
3DMark01: 21,604
3DMark03: 6609
Aquamark 3D: 47,444
                                        256M Aperture, FSB 214, [email protected]
3DMark01: 21,411
3DMark03: 6616
Aquamark3D: 47,545
                                        128M Aperture, FSB 218 [email protected]
Aquamark3d: 48,012 CPU score of 10,010 , I only wish it was sustainable. This was the first bench I ran and it never ran that fast (FSB 218)again .
Though the 256M aperture wasn't much of an overall increase, it is still faster with DirectX9 based tests. I found this to be true with the Radeon 9700 Pro 128M and the 9800 XT 256M. I'm hoping the Nvidia guys here will test their systems for us in a similar fashion and post regarding the aperture settings and benchmark scores.
I am also curious about the way 1G of memory will handle (Muskin lvl. II [email protected]), if anyone could be so kind as to run these tests with 1G of RAM, I would be very appreciative.
Good work MSI any improvement is welcomed. Thanks again Bas for the early release of 1.20.

ok - some impressions
the memory is a litte bit faster
i can oc to 214fsb with the ram at 400mhz ddr, this will result in 428mhz  ram speed @ 2-3-2-6
i can overclock to 225fsb if i limit my 400mhz ddr ram to 333mhz
this will result in 375mhz ram speed with 2-3-2-6
is there any possibility to limit the ram to 366mhz so i could run the fsb at 225 with ram limited to 366 - so the ram would run with 412mhz 2-3-2-6
would be a GREAT increase for the overclockers in general

Similar Messages

  • What to clean an ipod with....please post

    My brother and sister both have the new video ipod and i jsut recently recieved one. Both my brother and sister's screens have terrible markings. They dont look like scratches, just smudges or something. I've tried wiping it off, but these "smudges" don't come off. Is there any household product that i can use to clean off teh screen? I'm trying to do this because i just bought a protective covering, so I am trying to clean the screen before i put the cover on.

    Duplicate Post.
    Please reply in original thread by same user.
    http://discussions.apple.com/thread.jspa?threadID=333185&tstart=0

  • What can be don with theese 10000Mips? Please Post back

    I want to by an X-Fi Soundcard.
    Is it possible, foraexample, to set up a few parametric equalizers for each audio channel?
    If yes, how many?
    The X-Fi site tells about the instruction set and the architecture of the chip. Is it possible to write own "Soundshaders"? I mean own effets, which can be processed in Hardware and can be aplied to all 2D and 3D voices.
    Nvidia has this FX-Studio to develop FragmentShaders for their Graphiccards.
    I simply can't believe that the "entertainment mode" uses up all resources of this chip. A 0band Equalizer is for me something to laugh at, you know.
    I want to compensate all the parasitic effects in my room.
    I want to correct the resonaces, the frequency plot of my speakers(down to 25Hz if possible), of course the resonances of my speakers.
    If you tell me, that it can't be done in gaming mode, because of performance lacks. That wouldn't be a problem, as i only intend to listen to music.
    Can anyone tell me what can be done and what can't.
    I simply want to know, what this soundcard can do for me, before i intend to spend a few hundred bucks on it.
    I hope anyone replys!
    Thanks in advance
    MadMartin

    MadMartin wrote:
    I want to by an X-Fi Soundcard.
    Is it possible, foraexample, to set up a few parametric equalizers for each audio channel?
    If yes, how many?
    The X-Fi site tells about the instruction set and the architecture of the chip. Is it possible to write own "Soundshaders"? I mean own effets, which can be processed in Hardware and can be aplied to all 2D and 3D voices.
    Nvidia has this FX-Studio to develop FragmentShaders for their Graphiccards.
    I simply can't believe that the "entertainment mode" uses up all resources of this chip. A 0band Equalizer is for me something to laugh at, you know.
    I want to compensate all the parasitic effects in my room.
    I want to correct the resonaces, the frequency plot of my speakers(down to 25Hz if possible), of course the resonances of my speakers.
    If you tell me, that it can't be done in gaming mode, because of performance lacks. That wouldn't be a problem, as i only intend to listen to music.
    Can anyone tell me what can be done and what can't.
    I simply want to know, what this soundcard can do for me, before i intend to spend a few hundred bucks on it.
    I hope anyone replys!
    Thanks in advance
    MadMartin
    8 simultaenous realtime effects.
    X-Fi Raw Data Path MIPs
    SRC..........730
    Filter.......200
    Mixer........20
    Tank.........440
    DSP..........80
    Total........0340
    Ref.
    jutapaMessage Edited by jutapa on 02-24-20062:20 PM

  • Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

    We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
    If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
    Please also use this template so it is easiest for us to extract this data
    Make/Model:
    Year:
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
    webOS version:
    Included in compatibility list:
    To find out if your carkit is listed on Palm's compatibility chart see here
    http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

    Make/Model: BMW 325I
    Year: 2006
    Carkit  Model info: Latest firmware for the 3-series.
    Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
    webOS: 1.4.0
    Included in compatibilty list: Yes
    It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

  • K8n neo2-f nf3 ultra board - onboard nic problem? Please post your experiences

    I just ordered the k8n neo2-f nf3 ultra board, with a venice 3500+ chip, from newegg.  I saw various posts on the mobo, however, from people who said the onboard nic doesn't work right out of the box, that they had to go in and manually enter the mac address in Windows that they retrieved from a sticker on the parallel port.
    I can deal with a problem like that easily, but I find it hard to believe MSI would ship such a defective board design as that.  Is this really the commonplace experience with this board?  Please post your experience with this board if you've used it or had experience with it

    Quote from: Scubahard on 15-September-05, 13:22:52
    Okay I typed my address under the "network addapters" and I still do not have any internet access.  I even tried to reboot...and nothing.  My computer knows when I have a cable hooked up to the port.  It will tell me "network cable connected" or "network cable unplugged."  I hooked up my netgear network card and I was able to get online. 
    Should I be messing with the "authentication" tab and/or the IEEE 802.1x setting?
    My windows 2k computer has a broadcast "node type" while me K*N Neo2 board does not have a line for node type (under ipconfig).  Also my XP computer does not have a line that will tell me the values for: DHCP Server and DNS Servers.  It also has a no value for the default gateway line.  It DOES have a value for the "Connection Specific DNS Suffix".  It is for comcast. 
    I hope all this is not too confusing.  I was trying to list all the questionable settings.  What should I try next? 
    Thanks!
    Well, if you're wondering about the 'dhcp server', 'dns servers', 'default gateway', etc., that is all in the 'Network Connections' folder which can be reached from the Control Panel.  To get to those settings, you right-click on the 'local area connection' that corresponds to the onboard lan, and click 'properties'.  Then, select 'network protocol(tcp/ip)' in the list of networking components and click the 'properties' button.  That will bring up the set of tabs where you can set those properties (although there is no 'dhcp server' address setting, just the option to either specify an address or use dhcp to automatically assign an address).
    I get the impression, though, that you're saying if you slap in a pci network card, it connects right away, so I doubt any of those settings are needed (unless you left out the part about going into the tcp/ip settings for the pci nic and specifying an address, etc., which I doubt you did).  Have you considered contacting msi tech support on the problem?  If it's a new board, I'm sure you're entitled to free tech support.  It seems like, with all of the chatter on these boards over this issue, they should be well aware of it and be familiar with the ways to 'fix' it.

  • Ppl with 2.4c, Please post ur Overclock settings!!! Whos the best overclock

    Please post your OCed 2.4c on this mainboard.
    Mine is as follows
    2.4c @ 3.1 only :(  FSB259
    Kingston DDR 400  512mb
    Zalman 7000 cu (this products real good) 19 C lower than using stock heatsink
    idle 32 C
    Max load only at 40 C
    Room temp 27 C !!!!

    And why is your MSI Motherboard a "lousy Board" if it can OC to 259 MHZ and Still Keep your CPU Running Cool? .............Sean REILLY875

  • Please post you MSI NEO-Fis2r specs

    If your amd 64 is running everything faster then you expected with an msi NEO-FIs2r please post your ram and other hardware specs.
    I need to know what I'm doing wrong
    Thanks

    AMD64 3400+ @ 210FSB @ 1.5V with Turbo Enabled  > Arctic silver 3 compound
    1Gig OCZ Twinned PC3200 Dual Channel Platinum Series EL-DDR @ 2.2.6.2 @ 2.7v
    MSI K8T800 Neo @ BIOS 1.2
    2 x 36gb Raptors 10k rpm on Promise > RAID (striping)
    Audigy 2 Platinum
    Coolermaster ATC-201 all alloy case with 5 internal fans
    Zalman CNPS7000A-Cu HSF
    Globalwin Onyx 18db 520w K8/Server PSU
    Onboard LAN + FW Disabled > 3com 10/100 nic instead
    Radeon 9700 Pro (Hercules) OC @ 389/366 with Artic Silent HSF (to be replaced with R420 on release day :D)
    FunC 1030 Mousematt with mouse skatez / Microsoft Opticalmouse / Internet Pro keyboard
    Plextor Premium CDRW / Pioneer DVD / Panasonic Floppy
    Temperatures : cpu idle 38c  / stress 46c  - system temp 36c (still trying to work out cuz last mobo was 22c with all these fans :/)
    WinXP Pro SP1 + updates DX9.0b (will be Win64 in summer when released)
    Prime 95 stable.
    3dmark03 6103.
    If you want a very stable PC build with the above specs .. excellent. no probs whatsoever - not even a slight hang/glitch or anything
    Cheers.
    Jon

  • New core centre please post findings

    please post construtive comments re the new version
    rants are not constructive and will be removed

    As long as I don't set to auto, it seems to function just fine.
    Setting to auto causes the FSB to begin increasing  and doesn't stop until the machine crashes . Requires a cold boot (or two) to get functional again.
    Temperature readings seem erratic.
    The interface though attractive is clunky I would prefer a more standard windowed interface. It certainly could include a fancy "skin" to perk things up a bit. The way it is now seems a bit nonintuitive. What is it supposed to be anyway ? Looks like the mottled front end of a Suzuki Hayabusa.
    The sliders are not smooth, it's not easy to settle on a particular increment.
    It would be nice to be able to see the individual settings without having to actually clik on the slider. (This always causes me to change the setting accidentally.) A "mouse over" would be sufficent but I think it would be better to just have it displayed underneath the slider.
    The temperature graph is a good idea but there are no details, it's much to small and IMHO I believe it should be more configurable and include a graph for the fans as well as a log for reviewing later. Also the way it flip flops to put the highest temp at the top is unecessary and annoying.
    The open and closing of the wings seems to be heavily delayed and this type of interface is again IMHO clunky.
    It seems necessary to implement a way to keep one from accidentally changing settings, however hiding the window in such a manner seems odd to me.
    The scrolling "about" dialog is cute but inefficient. I don't want to have to wait for that scroll in order to see my software version. Just give me the info. Leave the scrolling for the movie credits eh ?
    An always on top function would be very useful.
    The "CoreCenter" is a cool idea but the implementation is suffering.
    I would be MUCH happier to see the 875p bios issues resolved, as per a new bios. Than to have a new "CoreCenter" release. Not everyone will agree with my assessment but I bet all the owners of 1.3 and 1.4 bios dead mother boards will.
    Looking forward to seeing future posts in this thread.
    Thanx,
    Jag

  • GSkill 1600Mhz Ram on NF980-G65 Please post stable settings here for 1600Mhz

    G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL on NF980-G65 Mobo.
     Please post here about what settings you are using to run this ram stable on NF980-G65 Mobo.
    Exactly what are you setting in the bios? Voltage= ?  Anything else?
    Our knowledge of knowing what works & how, can be greater then what we get told by some Reps.
     Please, let us help each other to help ourselves. We know better, we really use these Mobos.

    Believe Mike's statement was "not going to gain anything significant" rather than "won't gain anything". In my experience, a stable 1333 is far better than a problematic 1600. With some tweaks, 1333 can rival basic 1600 performance anyway. Should as little of a gain as 1 or 2 FPS at 1600 speed be considered significant? IMHO, CPU & VGA have a bigger influence on performance than RAM. This isn't helping answer your thread's original topic question however, so I hope Vorg or others can come back with some specifics that worked for them. Many times, even with similar systems & components, the results can't be duplicated unfortunately.

  • MSI Neo2 users, cpu temperature!!!, please post yours!!!

    Hi Guys
    for the MSI Neo2 865PE users,i want to know, what is your guys cpu temperature while your computer is idle and stressed/underload.
    my rig:
    MSI Neo2-S (bios ver.1.0) P4 2.4C @stock speed with stock heatsink fan
    ATI Radeon 9500 Pro (not oc'ed)
    80 GB WD and 60 GB Seagate HDD
    Antec 1080 AMG with 430Watt psu
    4 fan running = 2 intake 2 blow out
    Sound Blaster Audigy
    1x512 MB Ram Kingston
    and,
    i'm using pcalert4, and it shows:
    CPU idle=45 Celcius
    CPU when playing games=60 Celcius
    System Temperature = 29-32 Celcius
    please post yours, please... because, i think it is too hot for p4 to have that kind of temperature.
    thank guys!!!

    Quote
    I am wondering how accurate the sensors are on these boards.
    I don't think MSI (nor any other manufacturer) has a step to calibrate the temperature sensors, so the answer is - not much  
    They are just relative temp readings, and probably vary from board to board.
    Quote
    system temp. Board readings are from 39c to 43c but the air temp coming out the back 120mm fan is 31c to 33c.
    Air cooling is achieved by transferring heat from hotter components to the cooler air. This will raise the temperature of the exhaust, but never higher than your hottest component. It actually depends where the sensor is located. If you put a card on the PCI slot above the Winbond chip, you would probably observe higher SYS temperatures.

  • HP LaserJet 1022 Printing Problems - Please Post Here

    Sorry, I hate to create a new thread, but tracking so many different threads on this one issue is becoming problematic for me. So with that being said, if you are still having a problem with printing to a LaserJet 1022 after the full uninstall I detailed in the FAQ thread followed by installing version 2.2 of the HP driver package, then let me know here. And specifically I want to know is which device you have, how your device is connected, the print driver version, and what apps are giving you problems. In my own personal testing, here is what I have found:
    USB direct connect - OK, I have yet to run into a problem here.
    USB connected to an Airport Extreme N - OK, I have yet to run into a problem here.
    USB connected to an Airport Express G - Paused problem. I got print job/page out and then the printer paused and would not resume. I don't have a functioning work around here yet, but I'm trying.
    So if I were going to fill out my own form, it would look like this:
    Printer: LaserJet 1022n
    Connection: USB connected to an Airport Express G (Firmware version 6.3)
    Driver Version: 1.1.0.182
    Apps: All
    Problem Description: Printer queue goes into a Paused mode and won't resume
    And to get you started, I have left a blank template at the end of this post.
    Also please make sure to include whether you have the 1022, 1022n, or 1022nw AND how it is connected to your Mac. If users of the 1020, what to chime in on this thread that is OK. Anyone else, please post in the FAQ thread or a different device specific thread. As the 1022 seems to be the most problematic at the moment, I'd like to track this down as quickly as possible.
    Just trying to help.
    Andrew
    =====
    Printer:
    Connection:
    Driver Version:
    Apps:
    Problem Description:

    Printer: LaserJet 1022
    Connection: USB connected to an Airport Express N (latest firmware, etc)
    Driver Version: 1.1.0.182
    Apps: All
    Problem Description: Can sometimes print a single page but then all status lights flash on printer and I have to turn the printer off - other times, nothing happens (printer pauses and will not resume). Have tried connecting via Bonjour and IP address but same problem occurs.

  • I am geeting an error with jsf 1.2 please help

    i have used a datatable tag in JSF which just takes a ResultSet object and prints every row in it in a tabular form. I cheked i am recieving the resultset object with about 8 columns but when the jsf page is invoked it gives me following error.
    HTTP Status 500 -
    type Exception report
    message
    descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: java.sql.SQLException: The column position '2' is out of range. The number of columns for this ResultSet is '1'.
    root cause
    javax.faces.el.EvaluationException: java.sql.SQLException: The column position '2' is out of range. The number of columns for this ResultSet is '1'.
    root cause
    java.sql.SQLException: The column position '2' is out of range. The number of columns for this ResultSet is '1'.
    root cause
    org.apache.derby.client.am.SqlException: The column position '2' is out of range. The number of columns for this ResultSet is '1'.
    note The full stack traces of the exception and its root causes are available in the GlassFish v3 logs.
    GlassFish v3
    Thanks
    Harish Ingle

    If possible please post your JSF code and the corresponding java code where in you are getting your resultset and preparing to display the same in your jsp page.

  • Format C drive with BIOS on Lenovo ThinkPad T400

    I would like to format my C:/ drive with BIOS to install my OS new.
    Formatting with a windows Install CD doesn't work as I get the error message: "A problem has been detected and windows has been shut down to prevent damage to your computer. .....STOP: 0x0000007B"
    When I enter BIOS through (Ctrl+P) after defining a new password it doesn't give any options where I can format the drives.  Please let me know how chan I format the C drive through BIOS. Thank you for your time.
    Solved!
    Go to Solution.

    This definitely helped. After pressing F1 I finally landed in BIOS, set the CD as the first boot device, changed SATA to compatibility mode. Now I am finally formatting the C drive.
    My next computer wont run with Windows, I am sick of it that the performance is decreasing with every new update and I need to reinstall the OS on yearly basis.
    Thank  you for your help, much appreciated.

  • What's wrong with my code? please help....

    when display button is clicked it must diplay the remarks but it didn't happen...
    what's wrong with my code? please help
    here is my code.....
    import java.applet.Applet;
    import java.awt.*;
    import java.awt.event.*;
    public class Area extends Applet implements ItemListener,ActionListener
         {Label arlbl = new Label("AREA");
          Choice archc = new Choice();
          Label extlbl = new Label("EXPENDITURE TYPE");
          CheckboxGroup extchk = new CheckboxGroup();
              Checkbox fchk = new Checkbox("FOOD",extchk,true);
              Checkbox schk = new Checkbox("SHELTER",extchk,false);
              Checkbox echk = new Checkbox("EDUCATION",extchk,false);
              Checkbox uchk = new Checkbox("UTILITIES",extchk,false);
          Label exalbl = new Label("EXPENDITURE AMOUNT");
          TextField exatf = new TextField("",20);
          Label remlbl = new Label("REMARKS");
          TextField remtf = new TextField("",30);
          Button disbtn = new Button("DISPLAY");
          Button resbtn = new Button("RESET");
          String display;
          public void init()
              {add(arlbl);
               archc.add("MANILA");
               archc.add("MAKATI");
               archc.add("QUEZON");
               archc.add("PASAY");
               add(archc);
               archc.addItemListener(this);
               add(extlbl);
               add(fchk);
               fchk.addItemListener(this);
               add(schk);
               schk.addItemListener(this);     
               add(echk);
               echk.addItemListener(this);
               add(uchk);
               uchk.addItemListener(this);
               add(exalbl);
               add(exatf);
               add(remlbl);
               add(remtf);
               add(disbtn);
               disbtn.addActionListener(this);
               add(resbtn);
               resbtn.addActionListener(this);
         public void itemStateChanged(ItemEvent ex)
              {int n = archc.getSelectedIndex();
               if(n==0)
                   {if(fchk.getState())
                         {exatf.setText("10000.00");
                         display = archc.getSelectedItem();
                   if(schk.getState())
                        {exatf.setText("15000.00");
                        display = archc.getSelectedItem();
                   if(echk.getState())
                        {exatf.setText("24000.00");
                        display = archc.getSelectedItem();
                   if(uchk.getState())
                        {exatf.setText("8500.00");
                        display = archc.getSelectedItem();
              if(n==1)
                   {if(fchk.getState())
                        {exatf.setText("5000.00");
                        display = archc.getSelectedItem();
                   if(schk.getState())
                        {exatf.setText("11000.00");
                        display = archc.getSelectedItem();
                   if(echk.getState())
                        {exatf.setText("7500.00");
                        display = archc.getSelectedItem();
                   if(uchk.getState())
                        {exatf.setText("24000.00");
                        display = archc.getSelectedItem();
              if(n==2)
                   {if(fchk.getState())
                        {exatf.setText("13000.00");
                        display = archc.getSelectedItem();
                   if(schk.getState())
                        {exatf.setText("7000.00");
                        display = archc.getSelectedItem();
                   if(echk.getState())
                        {exatf.setText("27000.00");
                        display = archc.getSelectedItem();
                   if(uchk.getState())
                        {exatf.setText("6000.00");
                        display = archc.getSelectedItem();
              if(n==3)
                   {if(fchk.getState())
                        {exatf.setText("6000.00");
                        display = archc.getSelectedItem();
                   if(schk.getState())
                        {exatf.setText("9000.00");
                        display = archc.getSelectedItem();
                   if(echk.getState())
                        {exatf.setText("15000.00");
                        display = archc.getSelectedItem();
                   if(uchk.getState())
                        {exatf.setText("19000.00");
                        display = archc.getSelectedItem();
         public void actionPerformed(ActionEvent e)
              {if(e.getSource() == disbtn)
                    {String amtstr = exatf.getText();
                     int amt = Integer.parseInt(amtstr);
                        {if(amt > 8000)
                             {remtf.setText(display + " IS ABOVE BUDGET");
                        else
                             {remtf.setText(display + " IS BELOW BUDGET");
              if(e.getSource() == resbtn)
                   {archc.select(0);
                   fchk.setState(true);
                   schk.setState(false);
                   echk.setState(false);
                   uchk.setState(false);
                   exatf.setText("");
                   remtf.setText("");
    Edited by: lovely23 on Feb 28, 2009 11:24 PM

    Edit: thanks for cross-posting this question on another forum. I now see that I wasted my time trying to study your code in the java-forums to help you with an answer that had already been answered elsewhere (here). Do you realize that we are volunteers, that our time is as valuable as yours? Apparently not. Cross-post again and many here will not help you again. I know that I won't.

  • Please post the ISO at the same time you post the fast track

    Dear Microsoft,
    Please post the ISO at the same time you post the fast track.  Your update downloads do not always go as planned (you upgrade the whole works, instead of just what changed) and it becomes necessary to wipe and reinstall with the current ISO.  Starting
    with a defunct ISO and then going through the various hoops to get to the current version is a several day job, not to mention that the same mechanism that caused an update to crash also will occur.
    And post it to a web site with a complete list of the various revisions.  List them one on top of another.  Do not have a separate web page with each new preview that has to be Googled to find.  Let us see them all in one place.
    Many thanks,
    -T

    TAM2
    Suggest you use the built in feedback tool.  That is the only way to contact those who are actually working on the OS.
    Wanikiya and Dyami--Team Zigzag
    Directions?
          --->
    How to Send Feedback to Microsoft in the Windows 10 Technical Preview
    Carey Frisch
    Thank you.  Right under my nose!
    And they are not letting me use the tool unless I have one of their idiot account.  Not going to happen.

Maybe you are looking for